TY - GEN A1 - Kühne, Hans-Carsten A1 - Maultzsch, Matthias A1 - Wolff, L. A1 - Meng, Birgit A1 - Raupach, M. ED - Maultzsch, M. T1 - Long-term performance of surface protection systems for concrete T2 - 11th International Congress on Polymers in Concrete (ICPIC `04) CY - Berlin, Germany DA - 2004-06-02 KW - Surface protection system KW - Concrete KW - Weathering KW - Water uptake KW - Freezethaw resistance KW - Chloride ingress KW - Carbonation KW - Hydrophobic treatment PY - 2004 SN - 3-00-013706-8 SP - 417 EP - 428 PB - BAM CY - Berlin AN - OPUS4-3602 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten A1 - Maultzsch, Matthias A1 - Meng, Birgit A1 - Raupach, M. T1 - Long-term perfomance of surface protection systems for concrete T2 - ICPIC '04 - 11th International Congress on Polymers in Concrete CY - Berlin, Germany DA - 2004-06-02 PY - 2004 AN - OPUS4-3603 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten A1 - Maier, Bärbel A1 - Maultzsch, Matthias A1 - Meng, Birgit A1 - Meinhold, Uwe T1 - Verification of the suitability of shotcrete on low strength concrete surfaces T2 - 10th International Conference on Durability of Building Materials and Components (DBMC) CY - Lyon, France DA - 2005-04-17 KW - Hydraulic engineering structures KW - Low strength concrete KW - Repair systems KW - Performance tests PY - 2005 SP - 8 pages CY - Lyon AN - OPUS4-7413 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten A1 - Maier, Bärbel A1 - Maultzsch, Matthias A1 - Meng, Birgit A1 - Meinhold, Uwe T1 - Verification of the suitability of shotcrete on low strength concrete surfaces T2 - 10. International Conference on Durability of Building Materials and Components CY - Lyon, France DA - 2005-04-17 PY - 2005 AN - OPUS4-7426 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten A1 - Müller, Urs T1 - Properties of heat and steam cured ultra high performance concrete T2 - BAM-Präsentation Nanocem Conference CY - Copenhagen, Denmark DA - 2006-04-25 PY - 2006 AN - OPUS4-12474 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten A1 - Maultzsch, Matthias A1 - Meinhold, Uwe A1 - Meng, Birgit T1 - Repair systems for hydraulic engineering structures with low strength T2 - European Symposium on Service Life and Serviceability of Concrete Structures ESCS-2006 CY - Espoo, Finland DA - 2006-06-12 PY - 2006 AN - OPUS4-12304 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kühne, Hans-Carsten A1 - Maultzsch, Matthias A1 - Meinhold, Uwe ED - Betoniyhdistys, S. T1 - Repair systems for hydraulic engineering structures with low strength T2 - European Sympsoium on Service Life and Serviceability of Concrete Structures (ESCS-2006) CY - Espoo, Finland DA - 2006-06-12 KW - Water engineering structures KW - Low strength concrete KW - Repair systems KW - Performance tests PY - 2006 SN - 952-507579-6 SP - 352 EP - 358 PB - Concrete Assoc. of Finland CY - Helsinki AN - OPUS4-12570 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Urs A1 - Kühne, Hans-Carsten A1 - Fontana, Patrick T1 - Eigenschaften von wärmebehandltem ultra-hochfestem Beton (UHPC) T2 - Wissenschaftsrat CY - Berlin, Germany DA - 2006-01-17 PY - 2006 AN - OPUS4-12026 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maultzsch, Matthias A1 - Kühne, Hans-Carsten A1 - Meinhold, Uwe A1 - Haamkens, Frank T1 - Entwicklung von Betonen mit geringer Festigkeit für die Beurteilung von Instandsetzungssystemen im Wasserbau N2 - Die Regelwerke (RL SIB, ZTV-ING) setzen für die Instandsetzung mit Betoninstandsetzungssystemen vergleichsweise hochwertige Betonuntergründe voraus. Speziell bei älterenWasserbauwerken sind oftmals nur geringerfeste Betonuntergründe vorhanden für die es bis jetzt keine geeigneten und geprüften Instandsetzungssysteme gab. Grundlage für die Entwicklung solcher Systeme sind entsprechende Referenzbetone als Untergrundbeton für die Verbundkörperprüfung. T2 - Wissenschaftsrat CY - Berlin, Germany DA - 17.01.2006 PY - 2006 AN - OPUS4-12028 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten A1 - Mellmann, Günter T1 - Abschätzung der Druckfestigkeit von hochfestem Beton mit dem Rückprallhammer N2 - Ziel der Untersuchungen war es, herauszufinden ob die Druckfestigkeit hochfester Betone zerstörungsfrei mit dem Rückprallhammer PROCEQEQUOSCHMIDT durch Ermittlung des klassischen Rückprallwerts R in Kombination, mit einem aus der Untersuchung von Metallen bekannten neuen Messwert L mit ausreichender Sicherheit beschrieben werden kann. T2 - Wissenschaftsrat CY - Berlin, Germany DA - 17.02.2006 PY - 2006 AN - OPUS4-12029 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meng, Birgit A1 - Fontana, Patrick A1 - Müller, Urs A1 - Kühne, Hans-Carsten T1 - Nanotechnologische Anwendungen im Baustoffbereich T2 - Nanotechnologie und Bauwesen (NanoTecture) CY - Düsseldorf DA - 2006-12-05 KW - Nanotechnologie KW - Analytik KW - Gefüge KW - Zement KW - Beton PY - 2006 SP - 13 EP - 27 CY - Düsseldorf AN - OPUS4-15703 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maultzsch, Matthias A1 - Kühne, Hans-Carsten ED - Zachariev, G. T1 - Performance Aspects of Polymer Modified Cement Concrete and Respective Testing T2 - 11th International Conference on Mechanics and Technology of Composite Materials CY - Sofia, Bulgaria DA - 2006-10-02 KW - PCC PY - 2006 SP - 43 EP - 48 PB - Bulgarian Academy of Sciences CY - Sofia AN - OPUS4-14035 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kühne, Hans-Carsten A1 - Haamkens, Frank A1 - Maultzsch, Matthias A1 - Meinhold, Uwe A1 - Meng, Birgit ED - Stark, J. T1 - Instandsetzung von Beton mit geringen Festigkeiten T2 - 16. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 2006-09-20 KW - Wasserbau KW - Beton mit geringer Festigkeit KW - Instandsetzung KW - Leistungsfähigkeit PY - 2006 SN - 3-00-018263-2 IS - Band 2 SP - 2-1173 - 2-1180 PB - Bauhaus-Univ. CY - Weimar AN - OPUS4-14475 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten A1 - Maultzsch, Matthias A1 - Haamkens, Frank A1 - Meng, Birgit A1 - Meinhold, Uwe T1 - Instandsetzung von Beton mit geringen Festigkeiten T2 - Ibausil 2006 CY - Weimar, Germany DA - 2006-09-20 PY - 2006 AN - OPUS4-14512 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - EN 1504-1 - 10 Products and systems for the protection and repair of concrete structures T2 - MICROCON- Kolloquium CY - Berlin, Germany DA - 2006-11-29 PY - 2006 AN - OPUS4-14525 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - Einfluss von Zusatzmitteln bei unterschiedlichen Temperaturen auf die Zementhydration T2 - TAM AIR Usermeeting CY - Dortmund, Germany DA - 2006-03-08 PY - 2006 AN - OPUS4-12204 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Westendarp, A. A1 - Reschke, T. A1 - Kühne, Hans-Carsten A1 - Maultzsch, Matthias A1 - Dauberschmidt, C. A1 - Rößler, G. T1 - Instandsetzung von Wasserbauwerken aus Beton; Teil 2 KW - Instandsetzung KW - Beton KW - Wasserbau KW - Spritzmörtel KW - Geringer fester Beton KW - ZTV-LB 219 PY - 2006 SN - 0005-9846 VL - 55 IS - 3 SP - 94 EP - 100 PB - Verlag Bau + Technik CY - Erkrath AN - OPUS4-12347 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Westendarp, A. A1 - Reschke, T. A1 - Kühne, Hans-Carsten A1 - Maultzsch, Matthias A1 - Dauberschmidt, C. A1 - Rößler, G. T1 - Instandsetzung von Wasserbauwerken aus Beton; Teil 1 KW - Instandsetzung KW - Beton KW - Wasserbau KW - Spritzmörtel KW - Geringer fester Beton KW - ZTV-LB 219 PY - 2006 SN - 0005-9846 VL - 56 IS - 1+2 SP - 22 EP - 29 PB - Verlag Bau + Technik CY - Erkrath AN - OPUS4-12348 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram A1 - Kühne, Hans-Carsten T1 - Entwicklung eines selbstverdichtenden Betons mit inerten Zusatzstoffen-Prüfung nach europäischer Richtlinie für SVB N2 - Im Rahmen von MICROCON, einem europäischen CRAFT-Projekt, besteht eine wesentliche Zielsetzung in der Optimierung von selbstverdichtendem Beton (SVB) im Hinblick auf Kosten und Leistungsfähigkeit durch den Einsatz von teilweise puzzolanischen Microfillern. Um die Puzzolanität bei der Beurteilung besser bewerten zu können, wird ein Referenzbeton benötigt, der aus weitestgehend inerten Zusatzstoffen besteht. Die Entwicklung eines solchen Referenzbetons fand an der BAM nach der japanischen Methode nach Okamura statt. T2 - Wissenschaftsrat CY - Berlin, Germany DA - 17.02.2006 PY - 2006 AN - OPUS4-12030 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram A1 - Kühne, Hans-Carsten T1 - Improvement of durability of SCC by the use of micro fly ash and limestone filler T2 - BAM-Präsentation Nanocem-Meeting CY - Copenhagen, Denmark DA - 2006-04-25 PY - 2006 AN - OPUS4-12475 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kühne, Hans-Carsten A1 - Maultzsch, Matthias A1 - Mellmann, Günter ED - Seiler, P. T1 - Einflüsse auf die Abreißfestigkeit von Betonuntergründen T2 - Industrieböden '07 CY - Ostfildern DA - 2007-01-16 PY - 2007 SN - 3-924813-68-X SN - 978-3-924813-68-0 VL - 2 SP - 713 EP - 718 PB - Techn. Akad. Esslingen CY - Ostfildern AN - OPUS4-14767 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Wolfram A1 - Kühne, Hans-Carsten T1 - Einfluss der Verarbeitungstemperatur auf die Eigenschaften von SVB bei Verwendung von Fließmittel und weiteren Zusatzmitteln N2 - Nachdem vor ca. 20 Jahren in Japan die Entwicklung der selbstverdichtenden Betone begann, dauerte es weitere 10 Jahre, bis diese Entwicklung auch Europa erreichte. Obwohl im Fertigteilsektor bereits deutlich mehr SVB zum Einsatz kommt als im Transportbetonbereich, bleiben die Produktionsmengen hinter dem zurück, was die Potenziale und Chancen dieser Technologie eigentlich erwarten ließen. Eine Ursache für die geringe Marktverbreitung sind die stark schwankenden und teilweise nur schwer beherrschbaren Frischbetoneigenschaften dieser Betone. KW - SVB KW - SCC KW - Zusatzmittel KW - Rheologie KW - Fließmittel Betontechnologie KW - Frischbetoneigenschaften PY - 2007 SN - 0373-4331 IS - 12 SP - 40 EP - 49 PB - Bauverl. BV CY - Gütersloh AN - OPUS4-16444 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten A1 - Schmidt, Wolfram A1 - Meng, Birgit T1 - The influence of temperature on self-compacting concrete in presence of superplasticizer and additional admixtures T2 - 5th International RILEM Symposium on Self-Compacting Concrete CY - Ghent, Belgium DA - 2007-09-03 KW - Influence of temperature KW - Self-compacting concrete KW - SCC KW - Superplaticizer KW - Admixtures PY - 2007 SN - 978-2-35158-050-9 VL - 1 SP - 405 EP - 410 CY - Bagneux, France AN - OPUS4-15897 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Toutlemonde, F. ED - et al., T1 - Performance and interactions of admixtures for SCC exposed to different climatic conditions T2 - Fifth International Conference on Concrete under Severe Conditions: Environment and Loading (CONSEC `07) CY - Tours, France DA - 2007-06-04 PY - 2007 SN - 1628-4704 VL - 2 SP - 979 EP - 986 CY - Tours, France AN - OPUS4-15050 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten A1 - Schmidt, Wolfram A1 - Meng, Birgit T1 - The influence of temperature on self-compacting concrete in presence of superplasticizer and additional admixtures T2 - 5th International RILEM Symposium on Self-Compacting Concrete CY - Ghent, Belgium DA - 2007-09-03 PY - 2007 AN - OPUS4-15967 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten A1 - Schmidt, Wolfram T1 - Spezifische Einflüsse der Mischtechnik auf Beton T2 - Mischseminar Betonmarketing Ost "Moderne Betone wirksam mischen" CY - Berlin, Germany DA - 2007-10-30 PY - 2007 AN - OPUS4-16171 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kühne, Hans-Carsten A1 - Schmidt, Wolfram T1 - Der Siebtrennversuch nach prEN 12350-11 KW - SCC KW - SVB KW - Prüfverfahren KW - Sedimentation KW - Siebtest KW - EN 12350-11 PY - 2007 SN - 0005-9846 VL - 57 IS - 10 SP - 448 EP - 454 PB - Verlag Bau + Technik CY - Erkrath AN - OPUS4-16148 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Urs A1 - Meng, Birgit A1 - Kühne, Hans-Carsten A1 - Nemecek, J. A1 - Fontana, Patrick ED - E. Fehling, ED - Schmidt, M. ED - S. Stürwald, T1 - Micro texture and mechanical properties of heat treated and autoclaved Ultra High Performance Concrete (UHPC) KW - Ultra high performance concrete KW - Micro texture KW - Mechanical strength KW - Secondary cemetitious materials PY - 2008 SN - 978-3-89958-376-2 IS - 10 SP - 213 EP - 220 CY - Kassel AN - OPUS4-16726 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten A1 - Maultzsch, Matthias T1 - Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Definitionen, Anforderungen, Qualitätsüberwachung und Beurteilung der Konformität - Teil 3: Statisch und nicht statisch relevante Inastandsetzung T2 - Fachtagung DIN EN 1504 - Europäische Norm für Schutz und Instandstzung von Betontragwerken CY - Ostfildern, Germany DA - 2008-11-29 PY - 2008 AN - OPUS4-18419 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - Instandsetzungsmörtel und -betone gemäß DIN EN 1504-3 T2 - Fachtagung DIN EN 1504 Europäische Norm für Schutz und Instandsetzung von Betontragwerken CY - Ostfildern, Germany DA - 2008-11-25 PY - 2008 AN - OPUS4-18508 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - Instandsetzungmörtel und -betone gemäß DIN EN 1504-3 ("Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Definitionen, Anforderungen, Qualitätsüberwachung und Beurteilung der Konformität - Teil 3: Statisch und nicht statisch relevante Instandsetzung") T2 - Fachtagung Instandsetzen von Betonbauteilen CY - Leipzig, Germany DA - 2008-09-25 PY - 2008 AN - OPUS4-18202 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - Instandsetzungmörtel und -betone gemäß DIN EN 1504-3 ("Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken -Definitionen, Anforderungen, Qualitätsüberwachung und Beurteilung der Konformität - Teil 3: Statisch und nicht statisch relevante Instandsetzung") T2 - Fachtagung Instandsetzen von Betonbauteilen CY - Erfurt, Germany DA - 2008-09-16 PY - 2008 AN - OPUS4-18203 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - Instandsetzungmörtel und -betone gemäß DIN EN 1504-3 ("Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Definitionen, Anforderungen, Qualitätsüberwachung und Beurteilung der Konformität - Teil 3: Statisch und nicht statisch relevante Instandsetzung") T2 - Fachtagung Instandsetzen von Betonbauteilen CY - Rostock, Germany DA - 2008-10-02 PY - 2008 AN - OPUS4-18204 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - Instandsetzungmörtel und -betone gemäß DIN EN 1504-3 ("Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Definitionen, Anforderungen, Qualitätsüberwachung und Beurteilung der Konformität - Teil 3: Statisch und nicht statisch relevante Instandsetzung") T2 - Fachtagung Instandsetzen von Betonbauteilen CY - Berlin, Germany DA - 2008-09-11 PY - 2008 AN - OPUS4-18205 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Wolfram A1 - Meng, Birgit A1 - Kühne, Hans-Carsten A1 - Rosignoli, D. T1 - Development and application of a novel ready-made compound including additions and admixtures for the easy production of SCC - Entwicklung und Anwendung einer neuartigen Werktrockenmischung aus Zusatzstoffen und Zusatzmittel für die einfache Herstellung von SVB N2 - Im Rahmen des europäischen Forschungsprojekts Microcon wurden wirtschaftliche und ökologische Ansätze zur Verwendung von Feinstfüllstoffen – so genannten Microfillern – in Bauprodukten, die auf zementgebundenen Systemen basieren, untersucht. Hauptzielsetzung war die Entwicklung von modifizierten Bindemitteln und Zusätzen für die Transportbeton- und Fertigteilindustrie bis hin zur Marktreife. Eine der Neuentwicklungen war eine leicht handhabbare Werktrockenmischung für selbstverdichtenden Beton (SVB), die alle Schlüsselkomponenten bis auf das Bindemittel und die grobe Gesteinskörnung enthält und eine hohe Robustheit in der Anwendung gewährleistet. KW - Self-Compacting Concrete KW - Robustness KW - Microfiller KW - Rheology KW - On-Site Application III KW - Selbstverdichtender Beton KW - Robustheit KW - Mikrofiller KW - Rheologie KW - Baustellenanwendung PY - 2008 SN - 0373-4331 N1 - Sprachen: Deutsch/Englisch - Languages: German/English IS - 3 SP - 4 EP - 11 PB - Bauverl. BV CY - Gütersloh AN - OPUS4-17125 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Vasilic, Ksenija A1 - Roussel, N. A1 - Meng, Birgit A1 - Kühne, Hans-Carsten ED - Olafur H. Wallevik, ED - Stefan Kubens, ED - Sonja Oesterheld, T1 - Computational modelling of SCC flow: Reinforcement network modelled as porous medium T2 - 3rd International RILEM symposium on rheology of cement suspensions such as fresh concrete CY - Reykjavik, Iceland DA - 2009-08-19 KW - SCC KW - Modelling KW - CFD PY - 2009 SN - 978-2-35158-091-2 IS - PRO 68 SP - 148 EP - 154 PB - RILEM Publications AN - OPUS4-20238 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eichhorn, Michael A1 - Kühne, Hans-Carsten A1 - Meng, Birgit T1 - Performance-Verbesserung bei Betonwerksteinen durch multi-funktionelle Nano-Additive T2 - 17. Internatiole Baustofftagung "ibausil" CY - Weimar, Germany DA - 2009-09-23 PY - 2009 AN - OPUS4-19556 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten A1 - Eichhorn, Michael T1 - Multifunktionelle Nano-Zusätze für Hochleistungs-Betonwerksteine UNACON-Projekt T2 - Öffentliches INNONET Abschlusstreffen CY - Berlin, Germany DA - 2009-01-15 PY - 2009 AN - OPUS4-18907 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Vasilic, Ksenija A1 - Meng, Birgit A1 - Kühne, Hans-Carsten A1 - Roussel, Nicolas T1 - Computational modelling of scc flow: reinforcement network modelled as a porous medium T2 - Rheo-Iceland 2009 3rd RILEM International Symposium on Rheology of Cement Suspensions Like Fresh Concrete CY - Reykjavik, Iceland DA - 2009-08-19 PY - 2009 AN - OPUS4-19403 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - Research for the benefit of SMEs Achieve a dirt-repellent effect on concrete pavers embedding hydrophobic agents into the concrete T2 - Research connection 2009 Fachtagung der europäischen Kommission CY - Prague, Czech Republic DA - 2009-05-07 PY - 2009 AN - OPUS4-19497 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - Probleme bei der Emittlung der Leistungsmerkmale von Mörteln nach DIN EN 1504-3 am Beispiel der Widersprüche zur Prüfnorm T2 - Tagung: Anwendung der nationalen und europäischen Regelwerke zum Schutz- und zur Instandsetzung von Beton und Betonbauwerken CY - Frankfurt am Main, Germany DA - 2009-05-05 PY - 2009 AN - OPUS4-19498 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Stark, J. T1 - Betoninstandsetzung mit modular zusammengesetzten PCC- und SPCC-Mörteln T2 - 17. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 2009-09-23 KW - Betoninstandsetzung KW - Instandsetzungsmörtel KW - Modulare Systeme KW - SPCC KW - PCC PY - 2009 SN - 978-3-00-027265-3 VL - 2 SP - 2-0151 - 2-0156 CY - Weimar AN - OPUS4-20301 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Meng, Birgit A1 - Kühne, Hans-Carsten A1 - Eichhorn, Michael ED - Stark, J. T1 - Performance-Verbesserung bei Betonwerksteinen durch multi-funktionale Nano-Additive T2 - 17. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 2009-09-23 PY - 2009 SN - 978-3-00-027265-3 VL - 2 SP - 2-0675 - 2-0680 CY - Weimar AN - OPUS4-20302 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Wolfram A1 - Kühne, Hans-Carsten T1 - Wechselwirkungen zwischen Zusatzmitteln und mineralischen Komponenten in selbstverdichtendem Beton beim Betonieren in unterschiedlichen Temperaturen KW - Self-compacting concrete KW - Admixtures KW - Temperature KW - Rheology KW - Limestone filler KW - Selbstverdichtender Beton KW - Zusatzmittel KW - Temperatur KW - Rheologie KW - Kalksteinmehl PY - 2009 SN - 1439-7706 VL - 2 SP - 32 EP - 38 PB - ad-media-Verl. CY - Köln AN - OPUS4-19412 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Wolfram A1 - Ramge, Peter A1 - Kühne, Hans-Carsten T1 - Einfluss der Lagerungsbedingungen von Zement auf die Verarbeitungs- und Erhärtungseigenschaften von Beton = Effect of the storage conditions of cement on the processing and hardening properties of concrete N2 - In Produktionspausen können in Betonwerken nennenswerte Lagerungsintervalle entstehen. Auf Baustellen und in den Instandsetzungen werden Zement- und Trockenmörtelsäcke teilweise über längere Zeiträume gelagert. Auch im Zusammenhang mit Zementimporten und zunehmend filigran abgestimmten Betonrezepturen die bereits bei kleinen Änderungen der Ausgangsstoffe sensibel reagieren, nimmt die Relevanz der Zementlagerung zu. Aus diesem Grund wurde der Einfluss der Zementlagerung auf die Eigenschaften von Betonen in einer Versuchsreihe an der Bundesanstalt für Materialforschung und -prüfung (BAM) ermittelt. KW - Alterung KW - Zement KW - Sulfationengehalt KW - C3A KW - Rheologie KW - Ageing KW - Cement KW - Sulphate ion content KW - Rheology PY - 2009 SN - 0373-4331 SN - 1865-6528 N1 - Sprachen: Deutsch/Englisch - Languages: German/English VL - 75 IS - 6 SP - 10 EP - 17 PB - Bauverl. CY - Gütersloh AN - OPUS4-19747 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schmidt, Wolfram A1 - Kühne, Hans-Carsten A1 - Meng, Birgit T1 - Temperature related effects on self-consolidating concrete due to interactions between superplasticizers, supplemental admixtures and additions T2 - 9th ACI International conference on superplasticizers and other chemical admixtures in concrete CY - Seville, Spain DA - 2009-10-12 KW - Polycarboxylate KW - Modified starch KW - Rheology KW - Self-compacting concrete KW - Temperature KW - Setting KW - Shrinkage KW - Heat evolution PY - 2009 SN - 978-0-9731507-8-0 SP - 135 EP - 147 AN - OPUS4-20884 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Vasilic, Ksenija A1 - Schmidt, Wolfram A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Stark, J. T1 - Experimental and numerical studies on calibration of a rotational rheometer for cementitious materials T2 - 17. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 2009-09-23 PY - 2009 SN - 978-3-00-027265-3 VL - 1 SP - 1-1135 - 1-1140 CY - Weimar AN - OPUS4-20300 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Wolfram A1 - Ramge, Peter A1 - Kühne, Hans-Carsten T1 - Efecto de las condiciones de almacenamiento del cemento en las propiedades de procesamiento y endurecimiento del hormigón / As consequências das condicoes de armazenamento do cimento nas qualidades do processamento e endurecimento do concreto PY - 2009 SN - 0373-4331 SN - 1865-6528 N1 - Sprachen: Spanisch/Portugiesisch - Languages: Spanish/Portuguese VL - 3 SP - 2 EP - 9 PB - Bauverl. CY - Gütersloh AN - OPUS4-20239 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten A1 - Vasilic, Ksenija A1 - Schmidt, Wolfram A1 - Meng, Birgit T1 - Experimental and numerical studies on calibration of a rotational rheometer T2 - 17. Internationale Baustofftagung "ibausil" CY - Weimar, Germany DA - 2009-09-23 PY - 2009 AN - OPUS4-19379 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - Technische Umsetzung und Verwendung der DIN EN 1504-3 für Instandsetzungsmörtel und -betone in Deutschland T2 - DBV Arbeitstagung: Schutz und Instandsetzung von Betonbauteilen - Aktuelle Regelwerke und Hinweise zum Stand der Technik CY - Berlin, Germany DA - 2010-11-02 PY - 2010 AN - OPUS4-22364 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit T1 - Development of a modular system for the protection and repair of concrete structures KW - Repair mortar KW - Repair systems KW - Polymer cement concrete (PCC) KW - Sprayed polymer cement concrete (SPCC) PY - 2010 SN - 1864-7251 SN - 0947-4498 VL - 16 IS - 4/5 SP - 387 EP - 400 PB - Aedificatio Publ. CY - Freiburg AN - OPUS4-22773 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Aguiar, J. B. ED - Jalali, S. ED - Camoes, A. ED - Ferreira, R.M. T1 - MODINSYS modular systems for the protection and repair of concrete structures T2 - 13th International Congress on polymers in concrete - ICPIC 2010 CY - Funchal-Madeira, Portugal DA - 2010-02-11 KW - Betoninstandsetzung KW - Instandsetzungsmörtel KW - Modulare Systeme KW - SPCC KW - PCC KW - Repair mortar KW - Modular systems KW - Concrete rehabilitation PY - 2010 SN - 978-972-99179-4-3 SP - 697 EP - 704 CY - Funchal-Madeira, Portugal AN - OPUS4-20937 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - Project "UNACON" - Use of multifunctional Nano-Additions for innovative high-performance CONcrete stones T2 - Konferenz der Fördermittelgeber und Forschungsträger im 7. Rahmenprogramm der EU Sektion "Evaluation CORNET und ERASME" CY - Berlin, Germany DA - 2010-01-29 PY - 2010 AN - OPUS4-21005 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ünal, Murat A1 - Kühne, Hans-Carsten T1 - Schutz und Instandsetzung von Betonglasfenstern des 20. Jahrhunderts T2 - Workshop "Betonglasrestaurierung" CY - Paderborn, Germany DA - 2010-03-02 PY - 2010 AN - OPUS4-21008 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten A1 - Ünal, Murat T1 - Technique for the protection and repair of concrete structures - a useful task for affected historical glass-concrete windows T2 - Fachtagung "Walls of Light and Colour", Dalles de Verres and Windows without Lead, History, Creation and Conversation, University of York CY - York, England DA - 2010-03-09 PY - 2010 AN - OPUS4-21009 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten A1 - Ünal, Murat T1 - Cement and Concrete Technology T2 - Fachtagung "Walls of Light and Colour", Dalles de Verres and Windows without Lead, History, Creation and Conversation, University of York CY - York, England DA - 2010-03-09 PY - 2010 AN - OPUS4-21010 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ramge, Peter A1 - Proske, T. A1 - Kühne, Hans-Carsten ED - Khayat, K.H. ED - Feys, D. T1 - Segregation of coarse aggregates in self-compacting concrete N2 - A major requirement on self-compacting concrete (SCC) is the resistance to any kind of separation. In the presented studies the segregation behavior of aggregates was analyzed systematically. The rheology of selfcompacting mortars was dealt with at first. Following, the segregation of particles of different size, shape and density in various mortars was examined. The aim was to find an analytical relation to estimate the risk of sedimentation, using the characteristics of the particles and those of the mortars. The classification of the aggregates according to their potential segregation is rather simple. But the description of the segregation resistance of the mortar is much more difficult. It is not possible to evaluate a mortar solely based on the rheological properties. The mixture composition must always be considered as well. Tests on concrete samples were conducted additionally to determine the influence of the overall system of SCC on the sedimentation of the aggregates. T2 - SCC2010 - Design, production and placement of self-consolidating concrete CY - Montreal, Canada DA - 2010-09-26 KW - Rheology KW - Segregation KW - Static yield stress KW - Mixture proportioning KW - Aggregates KW - Rheologie KW - Sedimentation KW - Statische Fließgrenze KW - Mischungszusammensetzung KW - Gesteinskörnung PY - 2010 SN - 978-90-481-9663-0 DO - https://doi.org/10.1007/978-90-481-9664-7_10 N1 - Serientitel: RILEM bookseries – Series title: RILEM bookseries VL - 1 IS - 3 SP - 113 EP - 125 PB - Springer AN - OPUS4-22298 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Vasilic, Ksenija A1 - Roussel, N. A1 - Meng, Birgit A1 - Kühne, Hans-Carsten ED - Khayat, K.H. ED - Feys, D. T1 - Computational modeling of SCC flow through reinforced sections N2 - Computational modeling of fresh SCC flow is a comprehensive and time consuming task. The computational time is additionally increased when simulating casting of reinforced sections, where each single reinforcement bar has to be modeled. In order to deal with this issue and to decrease the computational time, an innovative approach of treating a reinforcement network as a porous medium is applied. This contribution presents the model for concrete flow through reinforced sections, based on Computational Fluid Dynamics (CFD), coupling a single-phase flow model for SCC and a continuum macroscopic model for porous medium. In the last part of this paper, numerical simulations are compared with experimental results obtained on model fluids. T2 - SCC2010 - Design, production and placement of self-consolidating concrete CY - Montreal, Canada DA - 2010-09-26 PY - 2010 SN - 978-90-481-9663-0 DO - https://doi.org/10.1007/978-90-481-9664-7_16 N1 - Serientitel: RILEM bookseries – Series title: RILEM bookseries VL - 1 IS - 5 SP - 187 EP - 195 PB - Springer AN - OPUS4-22277 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - Technische Umsetzung und Verwendung der DIN EN 1504-3 für Instandsetzungsmörtel und -betone in Deutschland? KW - Betoninstandsetzung KW - DIN EN 1504 KW - Instandsetzungsmörtel PY - 2010 N1 - Serientitel: Heftreihe Deutscher Beton- und Bautechnik-Verein e.V. – Series title: Heftreihe Deutscher Beton- und Bautechnik-Verein e.V. IS - 19 SP - 35 EP - 49 AN - OPUS4-22315 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - Success project in EraSME: The UNACON project T2 - Kolloquium "EraSME/CORNET Partnering Event" CY - Hanover, Germany DA - 2010-04-21 PY - 2010 AN - OPUS4-22569 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - Probleme bei der Ermittlung der Leistungsmerkmale von Mörteln nach DIN EN 1504-3 am Beispiel der Widersprüche zur Prüfnorm DIN 13295 "Bestimmung des Karbonatisierungswiderstands" T2 - QDB Tagung: PÜZ-Stellen SIB nach Bauregelliste und notifizierte Stellen CY - Stuttgart, Germany DA - 2010-06-22 PY - 2010 AN - OPUS4-22582 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gluth, Gregor A1 - Oppat, Klaus A1 - Vogler, Nico A1 - Kühne, Hans-Carsten ED - Littmann, K. T1 - Vergleich unterschiedlicher Verfahren zur Messung der Oberflächenrauheit N2 - Die Oberflächenrauheit eines Bauteils ist eine wichtige Kenngröße für zahlreiche seiner Eigenschaften. Der im Bauwesen übliche Rauheitsparameter ist die Rautiefe Rt bzw. MTD, die durch volumetrische Verfahren (Sandflächenverfahren) ermittelt wird und in zahlreichen Normen Verwendung findet. Laserbasierte Verfahren müssen deshalb eine Umrechnung der aus Oberflächenprofilen gewonnenen Informationen in Rt bzw. MTD ermöglichen. Hierzu wird i.A. ein empirischer Zusammenhang zwischen Parametern zur Beschreibung des Profils und der Rautiefe der entsprechenden Oberfläche verwendet. Der Aufsatz stellt verschiedene Rauheitsdefinitionen vor und vergleicht sie miteinander. Es wird ferner gezeigt, dass die nach verschiedenen Prüfvorschriften ermittelten Rautiefen voneinander abweichen. Das Vorgehen bei der Ermittlung des Zusammenhangs zwischen Profilparametern und Rautiefen nach einem volumetrischen Verfahren wird demonstriert und der Stand der laufenden Entwicklung eines Prüfgeräts auf Basis eines Linienlasers vorgestellt. T2 - 7. Internationales Kolloquium Industrieböden 2010 CY - Ostfildern, Germany DA - 14.12.2010 KW - Rauheit KW - Rautiefe KW - Volumetrische Methode KW - Sandflächenverfahren KW - Laserverfahren KW - Linienlaser PY - 2010 SN - 3-924813-85-X SP - 135 EP - 141 PB - Technische Akademie Esslingen (TAE) CY - Ostfildern AN - OPUS4-22855 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Littmann, K. T1 - Parameterstudien zum Einfluss von Rezepturveränderungen auf Schwindverhalten, Rissneigung und Steifigkeit mineralischer Instandsetzungsmörtel T2 - 7. Internationales Kolloquium Industrieböden 2010 CY - Ostfildern, Deutschland DA - 2010-12-14 KW - Betoninstandsetzung KW - Instandsetzungsmörtel KW - Modulare Systeme KW - Haftverbund KW - SPCC KW - PCC PY - 2010 SN - 3-924813-85-X IS - Kap. 2.6 SP - 191 EP - 200 AN - OPUS4-22845 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schmidt, Wolfram A1 - Kühne, Hans-Carsten A1 - Meng, Birgit A1 - Brouwers, H.J.H. ED - Aguiar, J. B. ED - Jalali, S. ED - Camoes, A. ED - Ferreira, R.M. T1 - Influence of ambient temperature conditions on the effect of stabilising polymers in cementitious building materials T2 - 13th International Congress on polymers in concrete - ICPIC 2010 CY - Funchal-Madeira, Portugal DA - 2010-02-11 KW - Stabilising agent KW - Polycarboxylate ether KW - Polysaccharides KW - Starch ether KW - Biopolymers KW - Rheology KW - Setting PY - 2010 SN - 978-972-99179-4-3 SP - 241 EP - 248 CY - Funchal-Madeira, Portugal AN - OPUS4-21971 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schmidt, Wolfram A1 - Brouwers, J. A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Khayat, K. H. ED - Feys, D. T1 - Effects of superplasticizer and viscosity-modifying agent on fresh concrete performance of SCC at varied ambient temperatures N2 - Varying ambient temperatures in plants or on construction sites during casting of SCC can cause serious problems affecting the fresh concrete performances, such as rheological properties and setting time, with consequences for the hardened properties in the structure. By sensible choices of the components, the robustness of SCC mixtures against temperature variations can be improved. However, this aspect has not been the focus of intensive research yet. In this study the effects of varied ambient temperatures on the early performance of differently composed SCC mixtures are investigated, with emphasis on changes in rheology, early deformations, heat evolution and setting. Focus is placed on the study of the influence of the polycarboxylate ether molecule type as well as different viscositymodifying agents on the temperature robustness. Effects on the relevance for practical concrete applications are evaluated, which will provide a reliable framework of possible actions on the appropriate use of admixtures for SCC. T2 - SCC 2010 - 6th International RILEM Symposium on self-compacting concrete / 4th North American conference on the design and use of SCC - Desgin, Production and Placement of self-consolidating concrete CY - Montreal, Canada DA - 2010-09-26 KW - Polycarboxylate KW - Modified starch KW - Rheology KW - Self-compacting concrete KW - Temperature KW - Yield stress KW - Viscosity PY - 2010 SN - 978-90-481-9663-0 DO - https://doi.org/10.1007/978-90-481-9664-7_6 N1 - Serientitel: RILEM bookseries – Series title: RILEM bookseries VL - 1 IS - 2 SP - 65 EP - 77 PB - Springer AN - OPUS4-22126 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten A1 - Schmidt, Wolfram A1 - Meng, Birgit A1 - Brouwers, H.J.H. T1 - Influence of ambient temperature conditions on the effected of stabilising polymers in cementitious building materials T2 - 13th International Congress on Polymers in Concrete CY - Madeira, Portugal DA - 2010-02-10 PY - 2010 AN - OPUS4-19910 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram A1 - Kühne, Hans-Carsten T1 - Verbesserung der Verarbeitungseigenschaften fließfähiger Betone bei veränderlichen Temperaturen T2 - Rheologie Workshop und Kolloquium CY - Regensburg, Germany DA - 2010-03-10 PY - 2010 AN - OPUS4-21935 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ünal, Murat A1 - Kühne, Hans-Carsten T1 - Dalles de verre - damage mechanisms, maintenance techniques and mortars for restoration N2 - The present article gives an insight into the research project BEGLARES. Main topics are the restoration “Dalles de Verre” Windows and the development of repair mortars and techniques. This project is executed in cooperation between Glasmalerei Peters GmbH, the University of York, and the BAM Federal Institute for Materials Research and Testing. It is funded by the Federal Ministry of Economics and Technology. The main mechanism of damage, Standards for protection and repair of concrete structures, and the development of repair mortar and special test specimens are presented. T2 - EWCHP-2011 - European workshop on cultural heritage preservation CY - Berlin, Germany DA - 26.09.2011 KW - Dalles de verre KW - Carbonation KW - Maintenance planning KW - Current state analysis KW - Repair techniques PY - 2011 SN - 978-3-8167-8560-6 SP - 289 EP - 293 AN - OPUS4-24560 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit T1 - Repair mortars for the restoration and reprofiling of natural stone elements in cultural heritage N2 - For the protection of the world's cultural heritage the restoration of listed buildings and monuments is an important task. In many cases the need to repair and reprofile natural stone elements occurs. Repair mortars for such applications have to match historicocultural interests as well as durability related and constructive interests. Currently a research project dealing with the development and optimisation of such mortars is set up at the BAM. Special focus is laid on the possibility of a modular adaption to match a vast variety of stone properties. Besides the development and lab scale testing of the mortar system, an in-situ application will be planned and executed. T2 - EWCHP-2011 - European workshop on cultural heritage preservation CY - Berlin, Germany DA - 26.09.2011 KW - Repair mortar KW - Natural stone KW - Stone restoration KW - Stone reprofiling KW - Modular system KW - Listed buildings and monuments PY - 2011 SN - 978-3-8167-8560-6 SP - 281 EP - 288 AN - OPUS4-24561 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Rogge, A. ED - Meng, B. T1 - Rheologie von Instandsetzungsmörteln - aktuelle Untersuchungen mit dem Würpelgerät T2 - 52. DAfStb-Forschungskolloquium CY - Berlin, Germany DA - 07.11.2011 PY - 2011 SN - 978-3-9814281-0-0 SP - 58 EP - 66 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-25192 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Vasilic, Ksenija A1 - Kühne, Hans-Carsten A1 - Meng, Birgit A1 - Roussel, N. ED - Rogge, A. ED - Meng, B. T1 - Modelling of fresh SCC flow through reinforced sections T2 - 52. DAfStb-Forschungskolloquium CY - Berlin, Deutschland DA - 2011-11-07 PY - 2011 SN - 978-3-9814281-0-0 SP - 50 EP - 57 PB - BAM Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-25193 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten ED - Rogge, A. ED - Meng, B. T1 - 'Instandhaltung' - aktuelle Themen beim Schutz und Instandsetzen von Betonbauteilen T2 - 52. DAfStb-Forschungskolloquium CY - Berlin, Deutschland DA - 2011-11-07 PY - 2011 SN - 978-3-9814281-0-0 SP - 216 EP - 226 PB - BAM Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-25180 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gluth, Gregor A1 - Vogler, Nico A1 - Gardei, André A1 - Kühne, Hans-Carsten ED - Rogge, A. ED - Meng, B. T1 - Laserbasiertes Messverfahren zur Rautiefe-Bestimmung T2 - 52. DAfStb-Forschungskolloquium CY - Berlin, Deutschland DA - 2011-11-07 KW - Rauheit KW - Rautiefe KW - Volumetrische Methode KW - Sandflächenverfahren KW - Laserverfahren KW - Linienlaser PY - 2011 SN - 978-3-9814281-0-0 SP - 256 EP - 261 PB - BAM Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-25176 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Rogge, A. ED - Meng, B. T1 - Entwicklung von modularen Instandsetzungsmörteln für den Einsatz an denkmalgeschützten Natursteinbauwerken T2 - 52. DAfStb-Forschungskolloquium CY - Berlin, Germany DA - 07.11.2011 PY - 2011 SN - 978-3-9814281-0-0 SP - 247 EP - 255 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-25177 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Rogge, A. ED - Meng, B. T1 - MODINSYS - Entwicklung und Modifikation von Instandsetzungsmörteln für Beton- und Stahlbetonkonstruktionen T2 - 52. DAfStb-Forschungskolloquium CY - Berlin, Germany DA - 07.11.2011 PY - 2011 SN - 978-3-9814281-0-0 SP - 238 EP - 246 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-25178 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ünal, Murat A1 - Kühne, Hans-Carsten ED - Rogge, A. ED - Meng, B. T1 - Reparaturmörtel und Instandsetzungstechniken zur Restaurierung von Betonverglasungen T2 - 52. DAfStb-Forschungskolloquium CY - Berlin, Deutschland DA - 2011-11-07 PY - 2011 SN - 978-3-9814281-0-0 SP - 227 EP - 237 PB - BAM Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-25179 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit T1 - Einfluss ausgewählter Modifikationen der Mischungszusammensetzung auf die Eigenschaften von Instandsetzungsmörteln N2 - Trotz der zahlreichen Möglichkeiten zur Beeinflussung der Mörteleigenschaften durch Mischungsmodifikationen ist es nahezu unmöglich, einzelne Eigenschaften unabhängig von anderen zu verändern. Bei einer Mischungsoptimierung muss im Einzelfall immer entschieden werden, welcher der gewünschten Eigenschaften die höchste Priorität zukommt. Anhand von Parameterstudien wird im vorliegenden Artikel verdeutlicht, wie es für bestimmte Anwendungen sinnvoll sein kann, die Verschlechterung einzelner Eigenschaften zu akzeptieren, wenn dadurch eine für den speziellen Einsatzfall essenzielle Eigenschaft verbessert werden kann. Die komplexen Wechselwirkungen der einzelnen Bestandteile fuhren dazu, dass auch scheinbar widersprüchliche Kombinationen von Zusatzmitteln im Einzelfall erforderlich werden können. Zur Anpassung der meisten Mörteleigenschaften gibt es verschiedene Möglichkeiten der Zielerreichung mit jeweils unterschiedlichen Nebeneffekten. Frisch- und Festmörteleigenschaften sind dabei gleichermaßen zu beachten. KW - Instandsetzungsmörtel KW - Betoninstandsetzung KW - Instandsetzungssysteme KW - Polymer-Zement Beton (PCC) KW - Polymer-Zement Spritzbeton (SPCC) KW - Repair mortar KW - Concrete rehabilitation KW - Repair systems KW - Polymer cement concrete (PCC) KW - Sprayed polymer cement concrete (SPCC) PY - 2011 SN - 1864-7251 SN - 0947-4498 VL - 17 IS - 3/4 SP - 169 EP - 180 PB - Aedificatio Publ. CY - Freiburg AN - OPUS4-24479 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten A1 - Ramge, Peter A1 - Meng, Birgit T1 - Repair Mortars for the Restoration and Reprofiling of Natural Stone Elements in Cultural Heritage T2 - DEWCHP-2011, European Workshop and Training Day on Cultural Heritage Preservation CY - Berlin, Germany DA - 2011-09-26 PY - 2011 AN - OPUS4-24712 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - Übersicht zur Normungsarbeit an der DIN 19573 "Mörtel für Neubau und Sanierung von Entwässerungssystemen außerhalb von Gebäuden" T2 - "Das Bauen mit Beton aus dem Blickwinkel der Dauerhaftigkeit und neuer Regelwerke", 3. Betonfachtagung Nord 2011, TU Braunschweig CY - Braunschweig, Germany DA - 2011-09-29 PY - 2011 AN - OPUS4-24713 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - Kunstsein statt Tuff-Bildhauerbeton T2 - Innovation Beton - Forum Zunkunft Bauen CY - Neumünster, Germany DA - 2011-09-12 PY - 2011 AN - OPUS4-25053 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - Neue Entwicklungen in der Normung für den Schutz und die Instandsetzung von Betonbauwerken T2 - Kolloquium "Sachkundiger Planer - Schadensdiagnose und Instandsetzung", Fortbildungsveranstaltung des Bau-Überwachungsvereins (BÜV) in Kooperation mit der BAM, BAM CY - Berlin, Germany DA - 2011-12-02 PY - 2011 AN - OPUS4-25054 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - Rheology and Performance of Grouts and Self Compacting Concrete T2 - Joint DTU - BAM Seminar on Design and Maintenance of Support Stuctures for Offshore Wind Converters CY - Copenhagen, Denmark DA - 2011-10-25 PY - 2011 AN - OPUS4-25055 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - Research areas with regard to new African-German research-projects BAM Federal Institute for Materials Research and Testing, Department 7 "Safety of Structures, Divison 7.1 "Building Materials" T2 - EiABC, Ethopian Institute ofArchitecture, Building Construction and City Development, Conference on German Ethopian Partnership CY - Addis Ababa, Ethiopia DA - 2011-05-25 PY - 2011 AN - OPUS4-25056 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - LightSHIP Lightweight Construction - Scientific Cooperation for Housing with Innovative Panel Technology T2 - BMBF - Workshop: Partnerships for Sustainable Solutions BMBF, Deutsches Zentrum für Luft- und Raumfahrt (DLR) CY - Bonn, Germany DA - 2011-05-31 PY - 2011 AN - OPUS4-25057 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bastert, H. A1 - Dickhaut, D. A1 - Eßer, A. A1 - Hintzen, W. A1 - Hohberg, I. A1 - Kühne, Hans-Carsten A1 - Kühner, S. A1 - Meyer, L. A1 - Raupach, M. A1 - Westendarp, A. A1 - Wiens, U. T1 - Überarbeitung der DAfStb-Richtlinie Instandsetzung - Statusbericht N2 - Derzeit erfolgt in mehreren Arbeitsgruppen unter Einbindung interessierter Kreise die Überarbeitung der 2001 erschienenen Richtlinie 'Schutz und Instandsetzung von Betonbauteilen' (Instandsetzungsrichtlinie) des Deutschen Ausschusses für Stahlbeton e.V. (DAfStb). Hierüber wird in dem nachfolgenden Beitrag berichtet, um der Fachwelt frühzeitig darzustellen, in welche Richtung die Fortschreibung des Regelwerkes geplant ist. Die geplante neue Richtlinie wird nach derzeitigem Beratungsstand eine deutliche inhaltliche Erweiterung erfahren. Daher wird sie in 'Richtlinie für die Instandhaltung von Betonbauteilen' (Instandhaltungsrichtlinie) umbenannt und wird Festlegungen zu der grundsätzlichen Vorgehensweise bei der Instandhaltung unter Berücksichtigung der Komponenten Wartung, Inspektion, Instandsetzung und Verbesserung in Anlehnung an DIN 31051 enthalten. Da diese umfassenderen Aufgaben deutlich präziser beschrieben werden, konkretisieren sich auch die Anforderungen an die erforderliche Qualifikation des sachkundigen Planers, der zukünftig verstärkt die 'Restnutzungsdauer' bei seiner Planung beachten und in entsprechende Maßnahmen umsetzen muss. Mit den Ergänzungen und Änderungen wird die Richtlinie an die aktuellen Entwicklungen und Regelungen im Betonbau angepasst. Gleichzeitig gewinnt die Planungsleistung erheblich an Bedeutung. Für Instandsetzungsprodukte gemäß DIN EN 1504 werden, die Beseitigung derzeit noch enthaltener Unklarheiten und technischer Defizite auf europäischer Ebene vorausgesetzt, Verwendbarkeitsmöglichkeiten aufgezeigt. Die Ausführung von Instandhaltungsmaßnahmen wird durch die Einführung von Überwachungsklassen mit zugehörigen Anforderungen an die durchzuführenden Prüfungen spezifiziert und damit konkretisiert. KW - Betoninstandsetzung KW - DIN EN 1504 KW - Europäische Normungsarbeit KW - Instandsetzungsmörtel KW - Oberflächenschutzsysteme PY - 2011 DO - https://doi.org/10.1002/best.201008258 SN - 0005-9900 SN - 1437-1006 VL - 106 IS - 7 SP - 501 EP - 510 PB - Ernst CY - Berlin AN - OPUS4-24342 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - "Instandhaltung" - aktuelle Themen beim Schutz und Instandsetzen von Betonbauteilen T2 - 52. DAfStb-Forschungskolloquium, BAM CY - Berlin, Germany DA - 2011-11-07 PY - 2011 AN - OPUS4-25250 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Sander, C. A1 - Kühne, Hans-Carsten A1 - Ünal, Murat A1 - Kleine, M. A1 - Köhler, A. A1 - Kriesten, V. T1 - Betondickglasfenster - Schadensmechanismen und Instandsetzungsprinzipien zur Erhaltung N2 - Errichtet aus Glas und Beton prägen heute unzählige Sakralbauten der 1950er- und 60er-Jahre unsere Stadtbilder. Nicht selten sind in diesen Kirchen erhebliche Schäden an den Betonglasfenstern zu verzeichnen. Diese fachgemäß zu erhalten, erfordert spezielles technisches und denkmalpflegerisches Know-how. An der Entwicklung geeigneter Instandsetzungsstrategien arbeitet derzeit ein interdisziplinäres Projektteam. KW - Betonglasrestaurierung KW - Schadensmechanismen KW - Instandsetzungsprinzipien KW - Glass KW - (Reinforced) concrete KW - Church windows KW - Churches KW - Structural analysis KW - Concrete block technique KW - Reinforcement KW - Dalle de verre PY - 2011 SN - 0933-4017 VL - 7 SP - 48 EP - 53 PB - Callwey CY - München AN - OPUS4-24834 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Drochytka, R. ED - Bohus, S. T1 - Natural stone reprofiling in cultural heritage with modular repair mortars N2 - Whenever the preservation of original substance obtains priority in a restoration task, reprofiling techniques using repair mortars are a welcome solution. For ordinary concrete repair aesthetic aspects are of minor importance whereas for the restoration of natural stone elements they come to the fore. Especially for listed buildings and monuments, historico-cultural and aesthetical interests become the ruling Parameters for planning and execution of restoration tasks. Nevertheless the technical and constructive requirements have to be considered and deterioration processes have to be understood to ensure sustainability and durability of the repair task. Due o differences in the Chemical and mineralogical composition, natural stone provides a vast variety of texture and colour. Also the range of different mechanical and durability related properties is far wider than found with concrete for example. A research project dealing with the development of a modular repair mortar System for natural stone is currently set up at the BAM. To provide the conservator with the best possible options to match colour, texture and technical requirements, the System will be setup on a modular basis. Several different binder Systems on basis of cement, lime and sodium Silicate as well as polymer based Systems are planned, which can be combined with different aggregate compositions and different pigments. To evaluate the mortar performance, test procedures will be defined for tests on mortar samples and on composite specimens. In the paper the experimental Programme will be explained and first results will be presented and discussed. T2 - 2nd WTA - Internaitonal PhD Symposium - Building materials and buidling technology to preserve the built heritage CY - Brno, Czech Republic DA - 06.10.2011 PY - 2011 SN - 978-3-937066-21-9 SN - 0947-6830 N1 - Serientitel: WTA-Schriftenreihe – Series title: WTA-Schriftenreihe IS - 36 SP - 208 EP - 216 PB - WTA Publications AN - OPUS4-24837 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Fontana, Patrick A1 - Lehmann, Christian A1 - Müller, Urs A1 - Kühne, Hans-Carsten A1 - Meng, Birgit A1 - Rogge, Andreas T1 - Wärmebehandlung und Autoklavierung von UHPC - Neue Perspektiven für die Betonfertigteilindustrie T1 - Heat curing and autoclaving of UHPC - New perspectives for the precast concrete industry N2 - Das Gefüge von UHPC ist durch eine dicht gepackte und fehlstellenarme Matrix gekennzeichnet. Eine zusätzliche Optimierung ist durch eine Wärmebehandlung bzw. hydrothermale Nachbehandlung (Autoklavierung) unter einem Wasserdampfsättigungsdruck möglich. Die Wärmebehandlung von Beton ist ein in der Betonfertigteilindustrie geläufiges Verfahren, um die Erstarrungszeit zu verkürzen und höhere Frühfestigkeiten zu erreichen. N2 - The structure of UHPC is characterized by a densely packed matrix with only a small number of voids; it can be enhanced further by heat curing or hydrothermal Treatment (autoclaving) subject to water vapor pressure. Heat curing of concrete is commonly applied in the precast industry in Order to shorten its setting time and achieve higher early strengths. KW - Ultrahochleistungsbeton KW - Stahlfasern KW - Nachbehandlung KW - Mikrostruktur KW - Festigkeit PY - 2011 SN - 0373-4331 SN - 1865-6528 N1 - Sprachen: Deutsch/Englisch - Languages: German/English VL - 77 IS - 10 SP - 46 EP - 47 PB - Bauverl. CY - Gütersloh AN - OPUS4-24838 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gluth, Gregor A1 - Taffese, W.Z. A1 - Kumaran, G.S. A1 - Uzoegbo, H.C. A1 - Kühne, Hans-Carsten T1 - Inorganic binder systems for innovative panel technology in East Africa - possible ways to produce building materials from local raw materials N2 - Many African countries face serious problems associated with the rapid growth of urban Population and the resulting demand for affordable building materials. In search for appropriate Solutions to improve the Situation, the “LightSHIP” project was initiated, whose aims were to identify the required product specifications, to evaluate possible approaches and ultimately to develop new Building materials for East Africa. It was concluded that these materials should be produced in Africa mainiy from local raw materials; prefabricated, easily transportable construction elements are to be preferred. It is therefore reasonable to focus on artificial stones and partition boards. To be Independent of imported cement, it is suggested to make use of volcanic rocks, which are abundant in East African countries, for lime-pozzoian binders and geopolymers in the production of these construction elements. Future research activities should thus concentrate on assessment of the applicability of available volcanic rocks, the influence of their properties on the resulting binders and the design of appropriate binder-reinforcement-filler Systems. T2 - Workshop cement and concrete for Africa CY - Berlin, Germany DA - 17.08.2011 KW - Building materials KW - East Africa KW - Volcanic rock KW - Natural pozzolans KW - Lime-pozzolan binders KW - Geopolymers PY - 2011 SN - 978-3-9814281-4-8 SP - 32 EP - 36 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-24779 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - Übersicht zur Normungsarbeit an der DIN 19573 - Mörtel für Neubau und Sanierung von Entwässerungssystemen außerhalb von Gebäuden N2 - Mörtel für den Neubau und die Instandsetzung sind seit vielen Jahrzehnten im Abwasserbereich für unterschiedliche Bereiche im Einsatz. Zumeist werden diese je nach Anwendungsbereich entsprechend der Vorgaben der Auftraggeber, den Erfahrungen der Hersteller und Verwender sowie den Empfehlungen von Interessenverbänden (z. B. DWA oder DVGW verarbeitet. Zugleich ist eine Reihe von adaptierbaren Regelwerken für ähnliche Produkte aus anderen Anwendungsgebieten verfügbar. Während die Regelwerke zum Schutz und zur Instandsetzung von Betonbauteilen bereits seit ca. 35 Jahren über den Deutschen Ausschuss für Stahlbeton und die Bundesanstalt für Straßenwesen entwickelt und fortgeschrieben werden und seit ca. 20 Jahren auch über ein Mandat der europäischen Kommission im CEN entsprechende Bauproduktnormen im Rahmen der EN 1504 erarbeitet wurden, wurde die Arbeit an einer Produktnorm für zementgebundenen Mörtel für den Bau und die Sanierung von Abwasserkanälen und -leitungen sowie Bauwerken in kommunalen Entwässerungssystemen und Kläranlagen erst im Jahr 2005 aufgenommen. Dieses Regelwerk wurde in Anlehnung an Bauprodukte für andere Anwendungsbereiche erstellt, berücksichtigt darüber hinaus aber die besonderen Anforderungen im Bereich der Abwasserkanäle und -leitungen. T2 - 3. Betonfachtagung Nord - Das Bauen mit Beton aus dem Blickwinkel der Dauerhaftigkeit und neuer Regelwerke CY - Brunswick, Germany DA - 29.09.2011 KW - Betoninstandsetzung KW - Mörtel KW - Abwasserbauwerke KW - Sanierung KW - DIN 19573 PY - 2011 SN - 978-3-7640-0544-3 SP - 175 EP - 189 AN - OPUS4-24784 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten A1 - Ünal, Murat T1 - Entwicklung von Instandsetzungsstrategien zur Restaurierung von Betonglasfenstern - Schadensprozesse und Lösungsansätze - T2 - Kolloquium Betonglasrestaurierung CY - Paderborn, Germany DA - 2011-10-10 PY - 2011 AN - OPUS4-24794 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Vasilic, Ksenija A1 - Meng, Birgit A1 - Kühne, Hans-Carsten A1 - Roussel, N. T1 - Flow of fresh concrete through steel bars: a porous medium analogy N2 - Although being a very promising area of concrete technology, computational modeling of fresh concrete flow is a comprehensive and time consuming task. The complexity and required computation time are additionally increased when simulating casting of heavily reinforced sections, where each single reinforcement bar has to be modeled. In order to improve the computation speed and to get closer to a practical tool for simulation of casting processes, an innovative approach to model reinforced sections is proposed here. The basic idea of this approach is to treat the reinforcement zone as a porous medium in which a concrete is propagating. In the present paper, the numerical implementation of this concept is described. A methodology allowing for the computation of the equivalent permeability of the steel bars network is suggested. Finally, this numerical technique efficiency is evaluated by a comparison with experimental results of model fluids casting in model formworks. KW - Fresh concrete (A) KW - Rheology (A) KW - Modeling (E) KW - Permeability (C) KW - Yield stress KW - Simulation KW - Flow of mortar KW - Flow of concrete PY - 2011 DO - https://doi.org/10.1016/j.cemconres.2011.01.013 SN - 0008-8846 SN - 1873-3948 VL - 41 IS - 5 SP - 496 EP - 503 PB - Pergamon Press CY - New York, NY AN - OPUS4-25532 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Raupach, M. T1 - Einfluss ausgewählter Modifikationen der Mischungszusammensetzung auf die Eigenschaften von Instandsetzungsmörteln N2 - Trotz der zahlreichen Möglichkeiten zur Beeinflussung der Mörteleigenschaften durch Mischungsmodifikationen ist es nahezu unmöglich, einzelne Eigenschaften unabhängig von anderen zu verändern. Bei einer Mischungsoptimierung muss im Einzelfall immer entschieden werden, welcher der gewünschten Eigenschaften die höchste Priorität zukommt. Anhand von Parameterstudien wird im vorliegenden Artikel verdeutlicht, wie es für bestimmte Anwendungen sinnvoll sein kann, die Verschlechterung einzelner Eigenschaften zu akzeptieren, wenn dadurch eine für den speziellen Einsatzfall essenzielle Eigenschaft verbessert werden kann. Die komplexen Wechselwirkungen der einzelnen Bestandteile fuhren dazu, dass auch scheinbar widersprüchliche Kombinationen von Zusatzmitteln im Einzelfall erforderlich werden können. Zur Anpassung der meisten Mörteleigenschaften gibt es verschiedene Möglichkeiten der Zielerreichung mit jeweils unterschiedlichen Nebeneffekten. Frisch- und Festmörteleigenschaften sind dabei gleichermaßen zu beachten. T2 - 2. Kolloquium "Erhaltung von Bauwerken" CY - Ostfildern/Stuttgart, Germany DA - 25.01.2011 KW - Betoninstandsetzung KW - Instandsetzungsmörtel KW - Modulare Systeme KW - Polymer cement mortar (PCC) KW - Sprayed polymer cement mortar (SPCC) PY - 2011 SN - 3-924813-87-6 SP - 213 EP - 221 AN - OPUS4-23218 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit T1 - Properties of repair mortars - potentials and risks of a tailor-made mixture proportioning N2 - Despite the numerous possibilities to influence the properties of repair mortars by modifications of the mixture proportioning, it is almost impossible to change an individual property without influencing other mortar properties. When optimising a mixture, it has to be decided for each individual case, which of the mortar properties needs to be treated with the highest priority. Most properties can be altered by several different measures, which may vary in effectiveness, side effects and cost efficiency. As the prevention of shrinkage induced constraining cracks is crucial for the durability and Service life of a concrete repair task, in the presented paper special attention is paid to the influences on the mortar’s shrinkage behaviour. On the basis of parameter studies it is shown, how it may be beneficial in certain cases to accept the worsening of some general properties if by this measure another property, which is essential for the individual application task, can be enhanced significantly. In general a tailor-made approach for the mixture proportioning seems beneficial but due to the complexity of the constituents’ interactions in repair mortars, it bears a high risk of unexpected malfunctions. T2 - Concrete-Workshop 'Performance-based specifications for concrete' CY - Leipzig, Germany DA - 14.06.2011 KW - Repair mortar KW - Concrete rehabilitation KW - Repair systems KW - Polymer cement mortar (PCC) KW - Sprayed polymer cement mortar (SPCC) PY - 2011 SN - 978-3-9814523-0-3 SP - 319 EP - 329 AN - OPUS4-23985 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ünal, Murat A1 - Kühne, Hans-Carsten A1 - Kleine, M. A1 - Sander, C. T1 - Development and design of repair and protection principles and a concrete repair mortar for the conservation of slab glass set in concrete from the 20th century N2 - Main topics of the research project BEGLARES are the restoration of "dalle de verre" concrete Windows and the development of repair techniques and mortars. This project is executed in Cooperation between Glasmalerei Peters GmbH, the University of York and the BAM Federal Institute for Materials Research and Testing. It is funded by the Federal Ministry of Economics and Technology. The main mechanism of damages, the development of repair mortar and special test specimens are presented. T2 - GLASSAC 11 - 3rd GLASSAC Conference 'Glass science in art and conservation' CY - Wertheim, Bronnbach Monastery, Germany DA - 10.05.2011 KW - Concrete glazing KW - Carbonation KW - Maintenance planning KW - Actual state analysis PY - 2011 SN - 978-3-8396-0255-3 SP - 43 EP - 46 PB - Fraunhofer Verlag AN - OPUS4-23730 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Rogge, A. ED - Meng, B. T1 - Zum Einfluss des Mischungsentwurfs und des Fließmittels auf temperaturbedingte Veränderungen der Rheologie von SVB T2 - 52. DAfStb-Forschungskolloquium CY - Berlin, Deutschland DA - 2011-11-07 KW - Fließmittel KW - Polycarboxylatether KW - Selbstverdichtender Beton KW - Temperatureffekte KW - Rheologie PY - 2011 SN - 978-3-9814281-0-0 SP - 40 EP - 49 PB - BAM Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-25194 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram A1 - Kühne, Hans-Carsten A1 - Meng, Birgit T1 - Zum Einfluss des Mischungsentwurfs und des Fließmittels auf temperaturbedingte Veränderungen der Rheologie von SVB T2 - 52. DAfStb-Forschungskolloquium, BAM CY - Berlin, Germany DA - 2011-11-07 PY - 2011 AN - OPUS4-25129 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marinescu, M.V.A. A1 - Schmidt, Wolfram A1 - Priebe, Nsesheye Susan A1 - Uzoegbo, H.C. A1 - Stipanovic Oslakovic, I. A1 - Kumaran, G.S. A1 - Brouwers, H.J.H. A1 - Kühne, Hans-Carsten A1 - Rogge, Andreas T1 - Recent developments and perspectives regarding the standardisation and quality surveillance of cement in the east, central and south african region N2 - The cement and concrete market in East, Central and Southern Africa is highly fragmented. The concrete industry in this area consists of multiple parties, including producers and suppliers of construction materials, formal and informal contractors, engineers and architects, unions of trades persons and workmen, governmental bodies and formal institutions of research and education. All these institutions mostly do not interact adequately, which makes building with cementitious materials susceptible to damage and failures. Completely opposed to the situation in Europe or North America, cement in Africa is often unaffordable, while manpower is cheap, which results in a questionable economisation of cement. Typically, there is not sufficient awareness of methods to sensibly reducing the cement content in concrete or replace Ordinary Portland Cement by adequate alternative materials. Research activities in this field of technology are often missing completely. Only few countries in the area, such as South Africa, are exempted from these issues. This paper presents the SPIN project, which is a joint project of a consortium of 8 African and 3 European partners within the ACP Science and Technology Programme. The project is funded by the EC and ACP Secretariat is the project body. The main objective of the current project is to strengthen the cement and concrete industry in the East and Central African regions. The project shall generate reasonable solution strategies to implement clean, safe and sustainable cement and concrete technology on the African continent, including general and specific guidelines for sensible application. Furthermore it shall be the kick-off for future projects, research activities and the world-wide expansion of a European-African network. The paper addresses special problems the cement and concrete market in Eastern, Central and Southern African countries has to face. Several options are presented in detail, which shall help overcoming the current situation. Customized solutions for the African market include rational methods for reducing the amount of cement used and the replacement of Ordinary Portland Cement with cheaper alternatives. The use of recycled concrete through a new and economically effective method, as well as the opportunity of using locally available resources is also discussed. T2 - 13th International congress on the chemistry of cement CY - Madrid, Spain DA - 03.07.2011 KW - Africa KW - Clean and safe cement production KW - Scientific network PY - 2011 SN - 978-84-7292-400-0 N1 - Geburtsname von Priebe, Nsesheye Susan: Msinjili, N. S. - Birth name of Priebe, Nsesheye Susan: Msinjili, N. S. SP - 1 EP - 6 AN - OPUS4-24041 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Wolfram A1 - Brouwers, H.J.H. A1 - Kühne, Hans-Carsten A1 - Meng, Birgit T1 - Influence of environmental temperatures on the performance of polymeric stabilising agent in fresh cementitious materials N2 - Stabilising admixtures are commonly used additives in repair mortars and grouts. Beyond this, such type of admixture is increasingly used in concrete and other cementitious materials. In particular when fresh mortar or concrete properties have to be adjusted reliably, stabilising agents can be beneficially used to improve workability and robustness of the mixture. The mode of operation of these admixtures varies, rather affecting either the liquid phase or the solid particles in the dispersion, both causing strong interactions with the mortar or concrete system, and significant changes in their rheological behaviour. Furthermore, these are strongly affected by the environmental temperature during the casting process. In the paper the effect of temperature on the performance of stabilising agents in cementitious systems is presented and how performance changes affect fresh and hardening mortar or concrete properties. Particular attention is placed on interactions between stabilising agents and superplasticizers. Results are discussed with special focus on self-compacting concrete. KW - Biopolymers KW - Cementitious materials KW - Polycarboxylate ether KW - Rheology KW - Setting KW - Stabilising agent KW - Starch ether KW - Self-compacting concrete KW - Superplasticizer PY - 2011 DO - https://doi.org/10.4028/www.scientific.net/KEM.466.97 SN - 1013-9826 VL - 466 SP - 97 EP - 104 PB - Trans Tech Publ. CY - Aedermannsdorf AN - OPUS4-22853 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -