TY - CONF A1 - Friedrich, Jörg Florian A1 - Kühn, Gerhard A1 - Mix, Renate T1 - Tayloring of polymer surfaces with different monotype functional groups of variable density using chemical and plasma chemical processes T2 - 10th Dresden Polymer Discussion: Characterization of Polymer Surfaces and Thin Films CY - Meißen, Germany DA - 2005-04-10 KW - Plasma modification KW - Introduction of functional groups KW - Reactions at polymer surfaces PY - 2005 SP - 34 EP - 49 PB - Leibniz-Institut für Polymerforschung Dresden CY - Meißen AN - OPUS4-11941 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Friedrich, Jörg Florian A1 - Kühn, Gerhard A1 - Mix, Renate A1 - Hoffmann, Katrin A1 - Resch-Genger, Ute T1 - Tailoring of polymer surfaces with monotype functional groups of variable density using chemical and plasma chemical processes N2 - Polymer surfaces were modified in low-pressure glow discharge plasmas for introduction of monotype functional groups of different type and density. For this purpose three ways are selected, (i) oxygen plasma treatment followed by wet-chemical reduction of O functional groups to OH groups, (ii) plasma bromination for introducing C - Br groups and (iii) coating by deposition of thin plasma (co-) polymerized layers of functional groups-bearing monomers with OH, NH2, COOH, epoxy etc. functionalities. Subsequently, these groups were used as anchoring points for chemical grafting of spacer molecules, oligomers, prepolymers, fluorescent labels, ionic and nucleic acid residues, employing different chemical routes. The yield in monosort functional groups at polymer surfaces ranged from 10–14 (process i), 20–40 (process ii) and 18–31 groups per 100 C atoms (process iii) as measured by XPS after derivatization. The consumption of functional groups amounted to 40–90% of all functionalities present at the surface and depended on the dimensions of grafted molecules. For infinitely variably tuning the number of functional groups process iii was performed as copolymerization of a functional group-carrying comonomer with a non-functionalized (“chain-extending”) comonomer. KW - Introduction of functional groups KW - Plasma modification KW - Reactions at Polymer surfaces PY - 2006 SN - 0340-255x SN - 1437-8027 VL - 132 SP - 62 EP - 71 PB - Springer CY - Berlin AN - OPUS4-12515 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kühn, Gerhard A1 - Ghode, Archana A1 - Weidner, Steffen A1 - Retzko, Iris A1 - Unger, Wolfgang A1 - Friedrich, Jörg Florian ED - Mittal, K. L. T1 - Chemically well-defined surface functionalization of polyethylene and polypropylene by pulsed plasma modification followed by grafting of molecules T2 - 2nd International Symposium on Polymer Surface Modification: Relevance to Adhesion CY - Newark, NJ, USA DA - 1999-05-24 KW - Plasma modification KW - Chemical conversion of functional groups KW - Spacers KW - Polypropylene KW - Polyethylene PY - 2000 SN - 90-6764-327-0 VL - 2 SP - 45 EP - 64 PB - VSP CY - Utrecht AN - OPUS4-6975 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kühn, Gerhard A1 - Weidner, Steffen A1 - Decker, Renate A1 - Ghode, Archana A1 - Friedrich, Jörg Florian T1 - Selective surface functionalization of polyolefins by plasma treatment followed by chemical reduction N2 - Polymer surfaces can be finished with functional groups upon exposure to a plasma. Species of the plasma gas are attached at surface carbon atoms, forming functional groups of different composition. To produce a modified polymer surface with a high density and homogeneity of hydroxyl groups only, the oxygen-plasma-formed oxygen functional groups were chemically reduced by diborane and LiAlH4 with yields of 10 to 11 OH groups per 100 carbon atoms in the 3 to 5 nm near-surface layer as detected by X-ray photoelectron spectroscopy (XPS). The identification of hydroxyl groups was performed by means of attenuated total reflectance–Fourier transform infrared spectroscopy and XPS. KW - Attenuated total reflectance-Fourier transorm infrared spectroscopy KW - Chemical reduction of functional groups KW - Plasma modification KW - X-ray photoelectron spectroscopy PY - 1999 U6 - https://doi.org/10.1016/S0257-8972(99)00232-7 SN - 0257-8972 VL - 116-119 SP - 796 EP - 801 PB - Elsevier Science CY - Lausanne AN - OPUS4-6983 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian A1 - Kühn, Gerhard A1 - Mix, Renate T1 - Tailoring of Polymer Surfaces with Different Monotype Functional Groups of Variable Density Using Chemical and Plasma Chemical Processes T2 - 10th Dresden Polymer Discussion: Characterization of Polymer Surfaces and Thin Films CY - Meißen, Germany DA - 2005-04-10 KW - Plasma modification KW - Introduction of functional groups KW - Reactions at polymer surfaces PY - 2005 SP - 34 EP - 49 PB - Leibniz-Institut für Polymerforschung Dresden CY - Meißen AN - OPUS4-7332 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -