TY - GEN A1 - Goebbels, Jürgen A1 - Illerhaus, Bernhard A1 - Jasiûniene, Elena A1 - Recknagel, Christoph A1 - Weidemann, Gerd T1 - Quantitative Porosimetrie mittels Röntgencomputertomographie N2 - Die sehr gute Reproduzierbarkeit von tomographischen Messungen zusammen mit den digital vorliegenden Ergebnissen ermöglicht die zerstörungsfreie dreidimensionale quantitative Analyse der untersuchten Bauteile und Proben mit Methoden der Bildverarbeitung. Vorwiegend für den Nachweis von Poren eingesetzt, lassen sich mit CT auch unterschiedliche Materialbestandteile analysieren, wobei die einzige Voraussetzung ein hinreichender Unterschied (es genügen wenige Prozent) in den Röntgenabsorptionseigenschaften der zu unterscheidenden Bestandteile ist. Mit den in der Bundesanstalt für Materialforschung und -prüfung entwickelten Computertomographieanlagen kann der Anteil von Hohlräumen und Materialbestandteilen einer Probe bestimmt werden, wobei die Größe der nachzuweisenden Bestandteile sich über mehrere Größenordnungen erstreckt. An ausgewählten Beispielen aus den Bereichen Keramik, Bodenproben und Fahr-bahnübergangssystemen aus Asphalt werden die quantitativen Ergebnisse dargestellt und die in der Bestandteilanalyse erreichbare Genauigkeit diskutiert. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2000 CY - Innsbruck, Österreich DA - 2000-05-29 PY - 2000 UR - http://www.ndt.net/abstract/dgzfp00/data/17.htm SN - 3-931381-32-3 VL - 73 IS - 2 SP - 1-(?)-8(?) PB - DGZfP CY - Berlin AN - OPUS4-922 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goebbels, Jürgen A1 - Illerhaus, Bernhard A1 - Dietrich, H.-G. A1 - Neuhaus, M. ED - Brücker, C. T1 - Drucksondierungen, teufengenaue Probenahme und Präparation MKW-kontaminierter Lockersedimente T2 - 5. Workshop "Bohrlochgeophysik und Gesteinsphysik" CY - Hannover, Deutschland DA - 1999-10-07 PY - 2000 SN - 0947-1944 VL - 3 SP - 12 EP - 17 AN - OPUS4-1036 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidemann, Gerd A1 - Goebbels, Jürgen A1 - Illerhaus, Bernhard A1 - Dittrich, R. A1 - Mangler, M. A1 - Tomandl, G. T1 - Charakterisierung von Gradientenwerkstoffen mittels hochauflösender Computertomographie T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2001 CY - Berlin, Deutschland DA - 2001-05-21 PY - 2001 UR - http://www.ndt.net/article/dgzfp01/papers/p16/p16.htm N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 75-CD PB - DGZfP CY - Berlin AN - OPUS4-1128 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Onel, Yener A1 - Illerhaus, Bernhard A1 - Goebbels, Jürgen T1 - 320 kV Mikrofokusröntgenröhre und Flächendetektor, eine Kombination für die 3D-CT? T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2003 CY - Mainz, Deutschland DA - 2003-05-26 PY - 2003 UR - http://www.ndt.net/article/dgzfp03/papers/v27/v27.htm SN - 3-931381-47-1 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 83-CD SP - 1 EP - 7(?) PB - DGZfP CY - Berlin AN - OPUS4-2874 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Onel, Yener A1 - Illerhaus, Bernhard A1 - Goebbels, Jürgen T1 - Experiences in using a 320 kV micro focus X-ray tube and a large sized amorphous silicon detector for 3D-CT N2 - A novel 3D-CT scanner was set up at BAM to extend the applicability of the X-ray transmission microtomography (µ-CT) to specimens up to 30 cm in diameter. The scanner consists of a bipolar 320 kV micro focus tube and a flat panel detector of amorphous silicon. Minimisation of scattered radiation, control of room and system temperature, and corrective preprocessing on the projection data are necessary to achieve expectable CT images. Statistical evaluations to show the limits and results of CT investigations are reported. T2 - International Symposium on Computed Tomography and Image Processing for Industrial Radiology CY - Berlin, Germany DA - 2003-06-23 PY - 2003 UR - http://www.ndt.net/article/ct2003/v06/v06.htm SN - 3-931381-48-X N1 - Serientitel: DGZfP-Proceedings BB – Series title: DGZfP-Proceedings BB IS - 84-CD SP - 53 EP - 59 PB - DGZfP CY - Berlin AN - OPUS4-2875 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Illerhaus, Bernhard A1 - Goebbels, Jürgen A1 - Hort, N. A1 - Potzies, C. A1 - Frank, H. ED - Kainer, K. U. T1 - Non-Destructive Testing of Cast Magnesium Alloys by Computerized Tomography N2 - Summary Beside several favourable properties, like high specific strength and damping capacity, most magnesium alloys also exhibit an excellent castability and are therefore usually fabricated by high pressure die casting. Due to the high casting speed, the melt flow is non-laminar and air can be entrapped during the casting process causing porosity when the melt solidifies. The volume fraction of porosity can be up to 4%. Porosity highly influences the mechanical properties, reducing significantly the values of elongation, tensile strength and especially fatigue strength [1-5]. Additionally, no heat treatment is possible to reach the optimum mechanical properties of the material. An alternative casting technology to reduce porosity is the Thixomolding process where the material is cast in the semi-solid state. Different methods of non-destructive testing are possible to detect and remove affected components to ensure using components with a low content of porosity. One alternative of evaluating the porosity is the computerized tomography (CT). The CT enables a 3-dimensional view of the cast component. T2 - 6th International Conference and Exhibition on Magnesium Alloys and Their Applications CY - Wolfsburg, Germany DA - 2003-11-18 PY - 2003 SN - 3-527-30975-6 U6 - https://doi.org/10.1002/3527603565.ch119 VL - 6 SP - 746 EP - 751 PB - Wiley-VCH CY - Weinheim AN - OPUS4-3166 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Bernd R. A1 - Lange, Axel A1 - Harwardt, Michael A1 - Hentschel, Manfred P. A1 - Illerhaus, Bernhard A1 - Goebbels, Jürgen T1 - First refraction enhanced 3D computed tomography T2 - International Symposium on Computed Tomography and Image Processing for Industrial Radiology CY - Berlin, Germany DA - 2003-06-23 PY - 2003 SN - 3-931381-48-X N1 - Serientitel: DGZfP-Proceedings BB – Series title: DGZfP-Proceedings BB IS - 84-CD PB - DGZfP CY - Berlin AN - OPUS4-2519 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Illerhaus, Bernhard T1 - Metallische Schäume: Dichte, Porenverteilung und Verschiebungsfelder im 3D aus Microtomographiedaten T2 - 12. Arbeitstagung "Quantitative Bildanalyse" CY - Darmstadt, Germany DA - 2003-05-16 PY - 2003 AN - OPUS4-3804 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Illerhaus, Bernhard T1 - Digitale Detektionssysteme in der Röntgentechnik - kenngrößen, Eigenschaften und Einsatzgebiete T2 - DGZfP, 114. Sitzung des Arbeitskreises Stuttgart CY - Stuttgart, Germany DA - 2003-09-15 PY - 2003 AN - OPUS4-3811 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Illerhaus, Bernhard T1 - Flächendetektoren und Röntgenstrahlung, was man bei der Anwendung für die CT berücksichtigen sollte T2 - 8. Frauenhofer IPA Anwenderforum Rapid Product Development CY - Stuttgart, Germany DA - 2003-09-17 PY - 2003 AN - OPUS4-3812 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -