TY - CONF A1 - Illerhaus, Bernhard A1 - Kunisch, E. A1 - Kinne, R. W. T1 - μCT begleitete in-situ Druckversuche an spongiösem Knochen - Vergleich(ende Bestimmung) des experimentellen und simulierten Verschiebungsfeldes mit der simulierten internen Spannung T2 - DGZfP-Jahrestagung 2018 N2 - Untersuchungen haben gezeigt, dass sich ältere Schafe gut als Modell für die mi-nimalinvasive Behandlung von Osteoporose eignen [1]. Um einen Behandlungs-effekt nachzuweisen, wird dabei unter anderem die Belastungsfähigkeit des Kno-chens durch Druckversuche an kleinen Zylindern aus den behandelten und unbe-handelten Knochen bestimmt. Diese hatten hier einen Durchmesser von 10 mm und eine Höhe von 13 mm. Für den in-situ Druckversuch wurde eine Deben CT5000 verwendet. In einer Serie von Druckerhöhungen wurden die Proben je-weils tomographiert. Dabei ergab sich zunächst, dass mit der µCT innerhalb der Knochen im oberen und unteren Bereich schon Brüche nachgewiesen werden können, obwohl die gemessene Kraftaufnahmekurve keine Unstetigkeit zeigt. Deswegen wurden die starren Probenaufnehmer der Deben Anordnung durch bewegliche Aufnehmer ergänzt, die eine leichte Verkippung der belasteten Ober-flächen ausgleichen können. Ein Vergleich der gemessenen und der aus den µCT-Daten berechneten Verschiebungsfelder ergab trotz der komplexen Struktur der Knochen gute Übereinstimmungen. Diese Verschiebungen wurden dann mit den aus den µCT Daten simulierten mechanischen Druckversuchen, Von-Mise-Spannungen und daraus berechneten Verschiebungen verglichen. (VGStudioMax Simulation). T2 - DGZfP-Jahrestagung CY - Leipzig, Germany DA - 07.05.2018 KW - Computer Tomographie KW - In-situ Druckversuch KW - Simulation PY - 2018 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-448827 UR - https://www.ndt.net/?id=23080 SN - 978-3-940283-92-4 VL - DGZfP BB 166 SP - 1 EP - 7 PB - DGZfP CY - Berlin AN - OPUS4-44882 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Bernd R. A1 - Lange, Axel A1 - Harwardt, Michael A1 - Hentschel, Manfred P. A1 - Illerhaus, Bernhard A1 - Goebbels, Jürgen A1 - Bamberg, J. A1 - Heutling, F. T1 - X-Ray Refraction Topography and Computed Tomography for NDE of Lightweight Materials T2 - 9th European Conference on NDT T2 - 9th European Conference on NDT CY - Berlin, Germany DA - 2006-09-25 KW - Synchrotron Refraction CT KW - MMC KW - Bragg-Magnification PY - 2006 SN - 3-931381-86-2 SP - 1(?) EP - 9(?) PB - European Federation for Non-Destructive Testing CY - Berlin AN - OPUS4-13703 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kuka, K. A1 - Illerhaus, Bernhard A1 - Fox, C.A. A1 - Joschko, M. T1 - X-ray computed microtomography for the study of the soil-root relationship in grassland soils JF - Vadose zone journal N2 - We present results from the analysis of three-dimensional X-ray computed tomography images of undisturbed soil samples in grassland sites. A strong positive correlation between root parameters and the solid surface/solid volume ratio was found. Preliminary analyses suggest that the relationship between soil structure and root patterns is related to the intensity of land management at the grassland sites, with reduced root volumes at sites with increased land use intensity. The exploration of soil structure and its consequences for ecological functions is of prime importance for understanding of the 'critical zone.' In soils, the relationship between soil structure and plant roots—which influences water dynamics in soil—deserves special interest. With X-ray computed microtomography (micro-CT), soil structure and roots may be visualized and quantified simultaneously. We analyzed undisturbed soil samples from three grassland sites. After scanning the soil cores with an X-ray micro-CT scanner (resolution 40 µm), roots were delineated from the soil material and soil pore space by means of their X-ray grey value characteristics followed by the use of space transformation during image analyses. To determine efficacy of the X-ray micro-CT to identify roots, root volumes and surfaces were quantified with a standard root washing method showing good correspondence. A strong positive correlation between root volume and surfaces and the solid surface/solid volume ratio was found, with greater root growth in a more aggregated and porous soil. Preliminary analyses suggest that the relationship between soil structure and root patterns is related to the intensity of land management at the grassland sites, with reduced root volumes and surfaces at sites with increased land use intensity. This methodology has substantial potential for further research on management influences on soil structure and root growth across landscapes. KW - X-ray micro-CT KW - CT KW - Computed tomography KW - Micro-CT KW - Computed microtomography KW - Soil structure KW - Grassland sites KW - Plant roots KW - 3D PY - 2013 DO - https://doi.org/10.2136/vzj2013.01.0014 SN - 1539-1663 VL - 12 IS - 4 SP - 1 EP - 10 CY - Madison, Wis. AN - OPUS4-29643 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Illerhaus, Bernhard A1 - Joschko, M. A1 - Walla, M. A1 - Barkusky, D. A1 - Gerlach, F. T1 - Wunderwelt der Mikro-Computertomografie: Die Wurzeln des Raps N2 - Mit Hilfe der Computertomographie können zerstörungsfrei Bilder des Bodengefüges gewonnen werden. Sowohl die verschiedene Dichte des Bodens als auch Hohlräume und Poren sowie Wurzeln und anderes organisches Material können dargestellt werden. Die Wurzeln werden dabei lagerichtig wiedergegeben. Begrenzt wird dieses durch die Ortsauflösung des jeweiligen Tomogramms. Ist die Methode für eine Fragestellung aus der landwirtschaftlichen Praxis – Einfluss der Bodenbearbeitung auf das Wurzelbild von Raps – geeignet? T2 - BraLa 2018 CY - Paaren, Germany DA - 10.05.2018 KW - Computertomographie KW - Bodenstruktur PY - 2018 AN - OPUS4-44884 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Joschko, M. A1 - Reinhold, J. A1 - Barkusky, D. A1 - Wiemer, M. A1 - Remus, R. A1 - Busse, J. A1 - Müller, H.-J. A1 - Kiesel, J. A1 - Gleixner, G. A1 - Illerhaus, Bernhard A1 - Kirchner, M. A1 - Oehley, J. A1 - Gerlach, F. T1 - Wirkung einer organischen Düngung mit Seeschlamm auf sandigem Boden im nordostdeutschen Trockengebiet PY - 2009 SP - 1 EP - 162 CY - Frankfurt/Main AN - OPUS4-20928 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schurig, Michael A1 - Joschko, M. A1 - Kuka, K. A1 - Illerhaus, Bernhard A1 - Fritsch, G. T1 - Wenn Wissenschaftler "spielen" gehen... JF - Bauernzeitung N2 - Eine Bodenprobenahme selbst hat schon Einfluss auf die Eigenschaften der Probe und kann sie verfälschen. Deshalb haben Forschen einmal einen Blick unter die Bodenoberfläche gewagt. KW - Computertomographie KW - Zerstörungsfreie Bodenproben PY - 2015 IS - 16. Woche SP - 30 EP - 31 PB - Deutscher Bauernverlag GmbH CY - Berlin AN - OPUS4-33117 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Illerhaus, Bernhard A1 - Ehrig, Karsten A1 - Staude, Andreas T1 - Vom Nutzen eines 4k x 4k Detektors für die Computertomographie T2 - DGZfP Dach-Jahrestagung 2015 T2 - DGZfP Dach-Jahrestagung 2015 CY - Salzburg, Austria DA - 2015-05-10 PY - 2015 AN - OPUS4-33185 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Morys, Michael A1 - Illerhaus, Bernhard A1 - Sturm, Heinz A1 - Schartel, Bernhard T1 - Variation of intumescent coatings revealing different modes of action for good protection performance JF - Fire Technology N2 - Thermal insulation and mechanical resistance play a crucial role for the performance of an intumescent coating. Both properties depend strongly on the morphology and morphological development of the foamed residue. Small amounts (4 wt%) of fiberglass, clay and a copper salt, respectively, are incorporated into an intumescent coating to study their influence on the morphology and Performance of the residues. The bench scale fire tests were performed on 75 x 75 x 2 mm³ coated steel plates according to the standard time–temperature curve in the Standard Time Temperature Muffle Furnace+ (STT Mufu+). It provided information about foaming dynamics (expansion rates) and thermal insulation. Adding the copper salt halved the expansion height, whereas the clay and fiberglass Change the height of the residue only moderately. The time to reach 500 °C was improved by 31% for clay and 15% for the other two fillers. Nondestructive micro computed tomography is used to assess the inner structure of the residues. A transition of the residue from a black, carbonaceous foam with closed cells into an inorganic, residual open cell sponge occurs at high temperatures. This transition is due to a loss of carbon; the change in microstructure is analyzed by scanning electron microscopy. Additional mechanical tests are performed and interpreted with respect to the results of the morphology analysis. Adding clay or copper salt improved the mechanical resistance tested by a factor 4. The additives significantly influence the thickness and foaming Dynamics as well as the inner structure of the residues, whereas their influence on insulation Performance is moderate. In conclusion, different modes of action are observed to achieve similar insulation performance during the fire test. KW - Intumescence KW - Coating KW - Bench scale fire testing KW - Computed tomography KW - Fire resistance PY - 2017 DO - https://doi.org/10.1007/s10694-017-0649-z SN - 0015-2684 SN - 1572-8099 VL - 53 IS - 4 SP - 1569 EP - 1587 PB - Springer AN - OPUS4-40751 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Jasiûniene, Elena A1 - Illerhaus, Bernhard A1 - Goebbels, Jürgen ED - Green, R. E. ED - Djordjevic, B. B. ED - Hentschel, M. P. T1 - Use of 3D Micro Tomography for the Investigation of the Mechanical Properties of Cellular Metals T2 - Nondestructive characterization of materials XI PY - 2003 SN - 3-540-40154-7 SP - 235 EP - 242 PB - Springer CY - Berlin AN - OPUS4-2767 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Badde, Aurelia A1 - Illerhaus, Bernhard T1 - Three Dimensional Computerized Microtomography in the Analysis of Sculpture JF - Scanning KW - Cast plaster statues KW - Three dimensional microtomography KW - Carrara marble sculpture KW - Condition assessment KW - Visualization KW - Internal structures KW - Material flaws KW - Ultrasound computed tomography KW - Correlation KW - Validation PY - 2008 DO - https://doi.org/10.1002/sca.20080 SN - 0161-0457 SN - 1932-8745 VL - 30 IS - 1 SP - 16 EP - 26 PB - Wiley CY - Hoboken, NJ AN - OPUS4-17578 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -