TY - JOUR A1 - Häßler, Dustin A1 - Hothan, Sascha T1 - Numerical and experimental analysis of reactive fire protection systems applied to solid steel rods in tension JF - Journal of Structural Fire Engineering N2 - The application of intumescent coatings for fire protection of steel constructions is increasing. Thanks to the relative thin thickness of the coatings, the typical visual appearance of the structures can remain essentially unchanged. In Germany, the applicability of the systems is regulated by the national as well as European technical assessments. According to the approvals, the application on steel members in tension is only allowed with limitations. Especially, the application on solid steel rods in tension is currently excluded from the approval. The paper explains the actual state of the art of the application of reactive fire protection systems applied to steel structures. Physical and technical background information are provided. Furthermore, the latest scientific results of an on-going research project funded by the German National Institute of Building Technology (DIBt) and conducted by the Federal Institute for Materials Research and Testing (BAM) will be described. KW - Steel structure KW - Tension member KW - Fire protection KW - Reactive fire protection system PY - 2015 SN - 2040-2317 VL - 6 IS - 4 SP - 275 EP - 282 PB - Multi-Science Publishing AN - OPUS4-35962 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Häßler, Dustin A1 - Hothan, Sascha T1 - Mechanische Hochtemperatureigenschaften von Stahlzuggliedern aus kaltverformten Blankstahl der Festigkeitsklasse S355 JF - Stahlbau N2 - Im Bauwesen werden für Zugglieder häufig Kreisvollprofile mit relativ kleinen Durchmessern eingesetzt. Diese Bauteile bestehen in der Regel aus gezogenem, kaltverformtem Blankstahl. Aufgrund des Herstellungsverfahrens kommt es zu einer Veränderung der Materialeigenschaften des Stahls. Für Blankstahl sind in der Norm [1] keine temperaturabhängigen Materialkennwerte angegeben. An der BAM Bundesanstalt für Materialforschung und -prüfung wurden im Rahmen eines Forschungsvorhabens [2] die mechanischen Hochtemperatureigenschaften von Stahlzuggliedern aus kaltverformtem Blankstahl der Festigkeitsklasse S355 untersucht. Als Ausgangsmaterial wurde ein Kreisvollprofil mit einem Durchmesser von 20 mm verwendet. Für den Blankstahl wurden die chemische Zusammensetzung, der Elastizitätsmodul, die Spannungs-Dehnungs-Kennlinien sowie der Wärmeausdehnungskoeffizient bestimmt. Ziel der Untersuchungen war es herauszufinden, welche materialspezifischen Besonderheiten kaltverformter Blankstahl unter Brandeinwirkung gegenüber anderen Stählen besitzt und inwieweit sich die in der Norm [1] für warmgewalzten Baustahl angegebenen Werte auf Blankstahl übertragen lassen. Die Ergebnisse der Materialuntersuchungen werden zudem für die numerische Nachrechnung von Brandversuchen an Stahlzuggliedern mit reaktiver Brandschutzbeschichtung verwendet.-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Mechanical properties of cold drawn steel S355 at elevated temperatures used for tension rods. In construction, circular solid steel rods with relatively small diameter are often used for tensile elements. These elements are usually made of cold drawn steel. As a result of the manufacturing process, the material properties of the steel are changed. In the standard [1], no information regarding the temperature-dependant material properties of cold drawn steel are given. At BAM Federal Institute for Materials Research and Testing, a research project [2] was conducted to investigate the mechanical properties at elevated temperatures of tension elements made of cold drawn steel type S355. In the experiments, the tensile specimens were produced from a circular solid profile with a diameter of 20 mm. Within the research project, the chemical composition, the modulus of elasticity, the stress-strain-relationships and the thermal expansion coefficient were determined. The aim of this investigation was to identify the specific material characteristics of cold drawn steel under fire exposure. Furthermore, a comparison between cold drawn steel and the commonly used in construction hot-rolled steel was done, in order to clarify whether the material properties of hot rolled steel that are given in the standard [1] can be also used for cold drawn steel. The results of the material tests are used as input values for a numerical simulation of fire tests on tension elements with reactive fire protection systems. KW - Stahlkonstruktion KW - Blankstahl KW - Zugglieder KW - Materialeigenschaft KW - Hochtemperatureigenschaft KW - Brandschutzbeschichtung KW - Abminderungsfaktor KW - High temperature property KW - Fireproofing coat KW - Reduction factor KW - Versuche - Experimental set-ups KW - Stahlhochbau - Steel buildings KW - Brandschutz - Fire protection KW - Property of material KW - Werkstoffe - Materials PY - 2015 DO - https://doi.org/10.1002/stab.201510264 SN - 0038-9145 SN - 1437-1049 SN - 0932-6375 VL - 84 IS - 5 SP - 332 EP - 340 PB - Ernst CY - Berlin AN - OPUS4-33203 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Hothan, Sascha A1 - Häßler, Dustin T1 - Numerische und versuchstechnische Untersuchungen zur Anwendung von reaktiven Brandschutzsystemen auf Zuggliedern aus Stahl N2 - Das Forschungsvorhaben verfolgt im Wesentlichen das Ziel, die Anwendbarkeit von reaktiven Brandschutzsystemen auf Zugstabsystemen auf Grundlage von allgemeinen bauaufsichtlichen Zulassungen zu ermöglichen. Zu diesem Zweck sollen neben versuchstechnischen Beurteilungsverfahren auch rechnerische Nachweismöglichkeiten im Rahmen der sogenannten Heißbemessung entwickelt werden. KW - Stahlkonstruktion KW - Brandschutz KW - Zugglieder KW - Reaktive Brandschutzsysteme KW - Materialeigenschaften KW - Blankstahl PY - 2015 SN - 978-3-8167-9444-8 SP - 1 EP - 277 PB - BAM Eigenverlag CY - Berlin AN - OPUS4-33703 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -