TY - JOUR A1 - Beck, Uwe A1 - Baier, Jennifa A1 - Hidde, Gundula A1 - Hielscher, Stefan A1 - Kittler-Packmor, Kai A1 - Lange, Thorid A1 - Mix, Renate A1 - Weise, Matthias T1 - Multiple-sample approach: reliable ranking and validated statistics of bonding and adhesive strength JF - Dispersion Letters N2 - Bonding strength of adhesive-bonded joints and adhesive strength of coatings have been exclusively determined in single-sample tests using a tensile testing machine. Necessarily, the single-sample approach was also applied to the corresponding bonding procedure. As a consequence, reliability and reproducibility of results were restricted. By applying the newly introduced centrifuge technology, the multiple-sample approach was realized for simultaneous tensile testing of up to eight samples under identical conditions without any disturbing shear-force effects. In order to introduce the multiple-sample approach into the bonding procedure, a hydraulic bonding set-up was developed which enables identical bonding pressure also for slightly different heights of sample assemblies. Both sample approaches were compared for various application examples: ranking of different classes of adhesives, validated statistics of adhesive-bonded joints using one particular adhesive and effects of cleaning and plasma-treatment on the adhesive strength of coatings. The investigated systems included glass, metals and polymer substrates, different adhesives, metallic and dielectric coatings on polymers. KW - Bonding strength KW - Adhesive strength KW - Multi-sample approach KW - Centrifuge technology PY - 2014 SN - 978-3-944261-28-7 SN - 978-3-944261-36-2 SN - 978-3-944261-52-2 VL - 5 SP - 1 EP - 5 AN - OPUS4-31310 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rietz, U. A1 - Lerche, D. A1 - Beck, Uwe A1 - Hielscher, Stefan A1 - Kern, Janine T1 - Determination of bonding, adhesive and composite strength by means of centrifuge technology T2 - EURADH 2014 - 10th European Adhesion Conference (Proceedings) N2 - The quality and durability of bonded joints, coated systems and composites depend on various factors. Therefore effective quantitative tests to determine adhesive, bonding or composite strength are of great need for R&D and QC. In this paper a new measuring principle is described which uses the centrifugal force to generate the test load. By the geometry of the whole measurement set-up, the test specimen are supported from only one side, the influence of shear forces is avoided. The possibility to test up to eight samples in one measurement under identical testing conditions allows a high sample throughput. A detailed description of the whole sample preparation procedure including pre-treatment is followed by the specification of the measuring protocol as well as result analysis. For each application area bonding strength of joints, adhesive strength of coated systems and internal strength of composite materials examples are presented. T2 - EURADH 2014 - 10th European Adhesion Conference CY - Alicante, Spain DA - 22.04.2014 KW - Adhesive strength KW - Bonding strength KW - Composites KW - Centrifuge technology KW - Zentrifugentechnologie KW - Klebfestigkeit KW - Haftfestigkeit KW - Mehr-Proben-Prüfen/Kleben PY - 2014 SN - 978-84-616-9067-1 SN - 84-616-9067-2 SP - Paper 47, 203 EP - 206 AN - OPUS4-31311 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beck, Uwe A1 - Baier, Jennifa A1 - Hidde, Gundula A1 - Hielscher, Stefan A1 - Kittler-Packmor, Kai A1 - Lange, Thorid A1 - Mix, Renate A1 - Weise, Matthias T1 - Multiple-sample approach: reliable ranking and validated statistics of bonding and adhesive strength T2 - EURADH 2014 - 10th European Adhesion Conference (Proceedings) N2 - Bonding strength of adhesive-bonded joints and adhesive strength of coatings have been exclusively determined in single-sample tests using a tensile testing machine. Necessarily, the single-sample approach was also applied to the corresponding bonding procedure. As a consequence, reliability and reproducibility of results were restricted. By applying the newly introduced centrifuge technology, the multiple-sample approach was realized for simultaneous tensile testing of up to eight samples under identical conditions without any disturbing shear-force effects. In order to introduce the multiple-sample approach into the bonding procedure, a hydraulic bonding set-up was developed which enables identical bonding pressure also for slightly different heights of sample assemblies. Both sample approaches were compared for various application examples: ranking of different classes of adhesives, validated statistics of adhesive-bonded joints using one particular adhesive and effects of cleaning and plasma-treatment on the adhesive strength of coatings. The investigated systems included glass, metals and polymer substrates, different adhesives, metallic and dielectric coatings on polymers. T2 - EURADH 2014 - 10th European Adhesion Conference CY - Alicante, Spain DA - 22.04.2014 KW - Bonding strength KW - Adhesive strength KW - Multi-sample approach KW - Centrifuge technology PY - 2014 SN - 978-84-616-9067-1 SN - 84-616-9067-2 SP - Paper 49, 211 EP - 214 AN - OPUS4-31309 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -