TY - CONF A1 - Heyn, Andreas T1 - Elektrochemie in wässrigen Bindemitteldispersionen; ein neuer Ansatz in der Lackentwicklung T2 - Forschungsseminar des MDZWP 2014 CY - Magdeburg, Germany DA - 2014-03-27 PY - 2014 UR - http://www.mdz.ovgu.de/Forschungsseminare/2014.html AN - OPUS4-30469 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Heyn, Andreas A1 - Goebel, M. ED - J. Grosch, ED - E.J. Mittemeijer, T1 - Kurzzeit-Korrosionsprüfung von Schneidwaren auf Basis der Erfassung und Bewertung elektrochemischer Rauschsignale N2 - Die Korrosionsbeständigkeit von Schneidwaren wird derzeit noch in einem zyklischen Auslagerungsversuch mit anschließender visueller Bewertung geprüft. Neben der langen Versuchsdauer und unspezifischen Prüfung kommt es teilweise auch zu falschen Prüfaussagen. Durch die Anwendung und Weiterentwicklung einer elektrochemischen Untersuchungsmethodik, die speziell den Beginn von Lochkorrosion in sehr kurzer Zeit detektiert, steht ein neues Kurzzeit-Korrosionsprüfverfahren zur Verfügung, das gegenüber den bisherigen Prüfverfahren erhebliche Vorteile bietet. KW - Schneidwaren KW - Nichtrostender Stahl KW - Korrosion KW - Korrosionsprüfung KW - Prüfverfahren PY - 2009 DO - https://doi.org/10.3139/105.110020 SN - 0341-101x SN - 1867-2493 VL - 64 IS - 3 SP - 171 EP - 175 PB - Hanser CY - München AN - OPUS4-19648 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heyn, Andreas T1 - Bewertung neuer Korrosionsschutzkonzepte T2 - AG "Electrochemical Properties of Functional Materials" am IFW Dresden CY - Dresden, Germany DA - 2010-07-06 PY - 2010 AN - OPUS4-21503 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heyn, Andreas T1 - Möglichkeiten elektrochemischer Zustandsbewertung von Korrosionsschutzsystemen T2 - Sitzung des Arbeitsausschusses "Elektrochemische Prozesse", ProcessNet Thema "Korrosion und Galvanotechnik" CY - Frankfurt am Main, Germany DA - 2011-01-24 PY - 2011 AN - OPUS4-23074 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bender, S. A1 - Heyn, Andreas T1 - Evaluation and Screening of the pre-treatment states of Mg-alloys using Electrochemical Noise N2 - A successful application of magnesium alloys as light structural materials and for special applications, such as in the medical sector, depends significantly on their corrosion properties. Since the use of well-chosen surface coating systems can optimize these properties, many efforts are going in this direction. In general, any coating process must be seen in a close connection to the pre-treatment of the alloy surface, particularly for magnesium alloys. The pre-treatment is required to prepare the optimal surface for a coating system, in which adhesion and dissolution behaviour are the central properties. In the case of magnesium alloys this means a well-controlled removal of the casting or rolling skin, which would be prone to corrosion and poor adhesion. Additionally, in most cases the surface morphology should be smooth. An investigation of different pickling solutions and pickling parameters showed a wide range of effectiveness (i.e., the resulting mass loss and surface morphology). Another important and often underestimated fact is the comparatively strong tendency of magnesium to react with the atmosphere. For that reason, after a completed pickling and cleaning treatment the condition of the surrounding atmosphere and the time prior to coating of the surface should be taken into account because of the formation of different reaction layers. These layers have an effect on adhesion and the corrosion properties of the coating system as a whole. For a documentation of the influence of different atmospheres and the timedependence of the surface activity the measurement of the electrochemical noise is the preferred technique. This is because it shows instantaneously the actual activity, even in the absence of external excitation. The influence of different pre-treatments as well as exposure conditions and duration was investigated using electrochemical noise measurements as a screening method. As a result the pretreatment which is an important part of the coating process could be considerably improved. T2 - EUROCORR 2009 CY - Nice, France DA - 2009-09-06 KW - Magnesium KW - Pre-treatment KW - Pickling KW - Electrochemical noise PY - 2009 IS - Paper 8080 SP - 1 EP - 8 AN - OPUS4-20064 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heyn, Andreas T1 - Korrosion empfindlich messen - Was haben wir erreicht? T2 - Arbeitskreissitzung "Prüf- und Untersuchungsverfahren" und "Corrosion Monitoring" der GfKORR CY - Frankfurt am Main, Germany DA - 2010-04-22 PY - 2010 AN - OPUS4-21257 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Sarmiento Klapper, Helmuth A1 - Heyn, Andreas A1 - Goellner, J. T1 - La técnica de ruido electroquímico para la investigación de la corrosión localizada: del fenómeno a la aplicación N2 - En los últimos anos el registro y análisis del ruido electroquímico ha posibilitado importantes avances en la investigación de fenómenos de corrosión localizada tales como el picado y la corrosión en rendijas. Así mismo, esta técnica a abierto enormes posibilidades para el monitoreo in situ de tales procesos corrosivos en la industria. Sin ninguna duda, la posibilidad de registrar en tiempo real y con extrema sensibilidad los procesos de nucleación de la corrosión localizada, hace de la técnica de ruido electroquímico una invaluable herramienta para alcanzar una mejor comprensión de su origen y propagación. A continuación se discutirán las fuentes de ruido electroquímico relacionadas con la corrosión localizada así como los avances alcanzados para una confiable adquisición y análisis de la información electroquímica suministrada por las senales de ruido electroquímico y se ilustrarán con ejemplos prácticos las ventajas de la técnica de ruido electroquímico para la evaluación de la corrosión localizada. KW - Ruido electroquímico KW - Corrosión localizada KW - Acero inoxidable KW - Aluminio KW - Elektrochemisches Rauschen KW - Korrosion KW - Passivität KW - Lochkorrosion PY - 2010 IS - November SP - 28 EP - 30 CY - Houston, TX, USA AN - OPUS4-23398 LA - spa AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heyn, Andreas T1 - Methoden und Geräte zur Korrosionsforschung - Gemeinsame Ergebnisse des MDZWP, der OvGU und der BAM T2 - Forschungsseminar des MDZWP CY - Magdeburg, Germany DA - 2011-04-01 PY - 2011 AN - OPUS4-23448 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heyn, Andreas T1 - Korrosionsschutz - Wechselwirkung zwischen Werkstoff, Medium und Design T2 - Anwendungsprofile von und durch AnSim - Galvanik neu gestalten CY - Berlin, Germany DA - 2011-03-23 PY - 2011 AN - OPUS4-23389 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heyn, Andreas T1 - Möglichkeiten zur Beschreibung des Schichtverhaltens unter Korrosionsaspekten T2 - Anwendungsprofile von und durch AnSim - Galvanik neu gestalten CY - Berlin, Germany DA - 2011-03-24 PY - 2011 AN - OPUS4-23390 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -