TY - CONF A1 - Schilder, Constanze A1 - Kohlhoff, Harald A1 - Hofmann, Detlef A1 - Basedau, Frank A1 - Habel, Wolfgang A1 - Baeßler, Matthias A1 - Niederleithinger, Ernst A1 - Georgi, Steven A1 - Herten, M. ED - Jaroszewicz, L.R. T1 - Static and dynamic pile testing of reinforced concrete piles with structure integrated fibre optic strain sensors N2 - Static and dynamic pile tests are carried out to determine the load bearing capacity and the quality of reinforced concrete piles. As part of a round robin test to evaluate dynamic load tests, structure integrated fibre optic strain sensors were used to receive more detailed information about the strains along the pile length compared to conventional measurements at the pile head. This paper shows the instrumentation of the pile with extrinsic Fabry-Perot interferometers sensors and fibre Bragg gratings sensors together with the results of the conducted static load test as well as the dynamic load Tests and pile integrity tests. T2 - EWOFS 2013 - 5th European workshop on optical fibre sensors CY - Kraków, Poland DA - 19.05.2013 KW - Static load test KW - Dynamic load test KW - Pile integrity test KW - Extrinsic Fabry-Perot interferometer KW - Fibre Bragg grating KW - Structure integrated sensor KW - Fibre optic strain sensor PY - 2013 SN - 978-0-81949-634-8 U6 - https://doi.org/10.1117/12.2026813 SN - 0277-786X N1 - Serientitel: Proceedings of SPIE – Series title: Proceedings of SPIE VL - 8794 IS - Paper 8794 - 181 SP - 700 EP - 703 AN - OPUS4-28854 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Niederleithinger, Ernst A1 - Baeßler, Matthias A1 - Herten, M. A1 - Rumpf, M. A1 - Tronicke, J. ED - Coutinho, R.Q. ED - Mayne, P.W. T1 - Geotechnical and geophysical characterization of a pile test site in post-glacial soil N2 - Two research institutes are currently evaluating dynamic pile load testing methods on bored piles in a sandy environment. A test site has been prepared, which ensures comparable conditions at all pile locations and provides detailed knowledge on soil and other boundary conditions. A detailed site investigation program was performed at a dedicated area on the BAM test site south of Berlin, Germany. Undisturbed soil samples have been collected from boreholes. In addition several CPTs and geophysical surveys have been performed. The site consists mainly of well graded, partly well compacted medium sands. But at depth an inhomogeneous gravel layer was detected in some parts of the site. This has led to a redesign of the test piles. They are now shorter than originally intended to avoid gravel layers at depth and to ensure that the drop weight available for dynamic test is capable to mobilize the required load. T2 - ISC-4 - 4th International conference on site characterization - Geotechnical and geophysical site characterization 4 CY - Pernambuco, Brazil DA - 17.09.2012 KW - Dynamic pile testing KW - Test site KW - CPT KW - Seismic tomography KW - Seismic crosshole PY - 2013 SN - 978-0-415-62136-6 VL - I SP - 459 EP - 464 PB - CRC Press AN - OPUS4-27492 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Niederleithinger, Ernst A1 - Baeßler, Matthias A1 - Georgi, Steven A1 - Herten, M. T1 - Comparison of static and dynamic load tests on bored piles in glacial soil N2 - BAW and BAM have performed a large scale comparison and calibration test on static and dynamic load capacity evaluation of bored piles in glacial sandy soil. The test was performed using eight piles at the BAM test site for technical safety at Horstwalde 50 km south of Berlin. The test area has been prepared and investigated in great detail using boreholes, cone penetration tests, pore pressure sensors and geophysical methods to assure controlled conditions for all piles and tests. The piles (10 m length, 0.9 m diameter) are mainly friction piles (low toe resistance) and have been checked by integrity testing. Five piles have been tested by five contractors using the dynamic method in a blind experiment, the other ones piles by static load and/or later on by the dynamic method. Some piles have been equipped with additional fibre optic Instrumentation which proved to be robust and helpful in interpreting the results of static, dynamic and integrity tests. We have experienced a deviation of the dynamic load test results gathered in the blind experiment from the static values of up to 20% in most cases, sometimes even up to 30%. This can be related to the known soil inhomogeneities, interpretation and modelling in CAPWAP and method inherent uncertainties. In cases where the static values were known by the testers for calibration, the deviations were significantly smaller. It has to be taken into account, that the two static load tests showed different results as well. Due to the low toe resistance, use of a big drop weight (11 tons) and large drop heights most piles suffered from cracking, which was clearly seen in follow up integrity tests and confirmed by excavation. The piles are available for further research. T2 - International conference on piling & deep foundations CY - Stockholm, Sweden DA - 21.05.2014 KW - Piles KW - Static load test KW - Dynamic load test KW - Integrity PY - 2014 SP - 1 EP - 8 AN - OPUS4-31202 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hofmann, Detlef A1 - Basedau, Frank A1 - Heidenreich, F. A1 - Herten, M. T1 - Verwendung faseroptischer Messtechnik im Zuge wiederholter Eignungsprüfungen an Verpressankern N2 - Im Rahmen des Ausbaus des Dortmund-Ems-Kanals wurden an der Schleuse Gleesen Forschungsanker installiert, die Rückschlüsse auf das Tragverhalten in Folge des chemischen Angriffs kalklösender Kohlensäure geben sollen. Die Forschungsanker werden seit der Erstellung im Jahr 2017 mit verteilter faseroptischer Sensorik während der jährlichen Eignungsprüfungen untersucht. Die Ergebnisse der Jahre 2017 bis 2019 werden im Folgenden dargestellt. T2 - Messen in der Geotechnik 2020 CY - Braunschweig, Germany DA - 20.02.2020 KW - Faseroptische Sensorik KW - Rayleigh Rückstreuung KW - Verpressanker KW - Chemischer Angriff KW - Rissbildung PY - 2020 SN - 978-3-948141-02-8 U6 - https://doi.org/10.24355/dbbs.084-201912181435-0 IS - 110 SP - 297 EP - 323 AN - OPUS4-51687 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Herten, M. A1 - Baeßler, Matthias A1 - Niederleithinger, Ernst A1 - Georgi, Steven T1 - Bewertung dynamischer Pfahlprobebelastungen an Bohrpfählen T2 - Pfahl-Symposium 2013 CY - Braunschweig, Germany DA - 2013-02-21 KW - Ringversuch KW - Statische Pfahlprobebelastung KW - Dynamische Pfahlprobebelastung KW - Bohrpfähle PY - 2013 SN - 3-927610-88-7 N1 - Serientitel: Mitteilung des Instituts für Grundbau und Bodenmechanik - Technische Universität Braunschweig – Series title: Mitteilung des Instituts für Grundbau und Bodenmechanik - Technische Universität Braunschweig IS - 96 SP - 79 EP - 100 AN - OPUS4-28072 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Herten, M. A1 - Baeßler, Matthias A1 - Niederleithinger, Ernst A1 - Georgi, Steven T1 - Bewertung dynamischer Pfahlprobebelastungen an Bohrpfählen T2 - Pfahlsymposium 2013 CY - Braunschweig, Germany DA - 2013-02-21 PY - 2013 AN - OPUS4-29125 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Baeßler, Matthias A1 - Niederleithinger, Ernst A1 - Herten, M. A1 - Georgi, Steven ED - Dietzel, M. ED - Kieffer, S. ED - Marte, R. ED - Schubert, W. ED - Schweiger, H.F. T1 - Dynamische Pfahlprobebelastungen an Bohrpfählen in einem Testfeld: Ein Ringversuch T2 - 28. Christian Veder Kolloquium - Tiefgründungskonzepte - Vom Mikropfahl zum Großbohrpfahl CY - Graz, Austria DA - 2013-04-04 KW - Ringversuch KW - Statische Pfahlprobebelastung KW - Dynamische Pfahlprobebelastung KW - Bohrpfähle PY - 2013 SN - 978-3-900484-66-8 IS - 49 SP - 229 EP - 244 AN - OPUS4-28073 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Baeßler, Matthias A1 - Niederleithinger, Ernst A1 - Georgi, Steven A1 - Herten, M. ED - Matsumoto, T. T1 - Evaluation of the dynamic load test on bored piles in sandy soil N2 - This paper summarizes the detailed planning of an evaluation project for dynamic load tests on bored piles in sandy soil. A test site had to be prepared, which ensures comparable conditions at all pile locations as well as a detailed knowledge on soil parameters and other boundary conditions. A detailed site investigation program was performed at a dedicated area on the BAM test site near Horstwalde south of Berlin, Germany. The site consists mainly of well graded, partly well compacted medium sands. A test program is designed that aims to give full responsibility for the testing performance to the operating consulting engineers. While each consultant is responsible for the testing of one of eight similar virgin piles, the test results will be compared to static load tests performed after the pile capacity analysis. The tests aim at a better understanding of the reliability of dynamic load tests and the necessary precautions for a good quality result. T2 - IS Kanazawa 2012 - 9th International conference on testing and design methods for deep foundations CY - Kanazawa, Japan DA - 18.09.2012 KW - Pile capacity KW - Bored pile KW - Evaluation study KW - Dynamic load test KW - Static load test PY - 2012 SN - 978-4-89010-597-7 IS - Paper 017 SP - 155 EP - 162 PB - Kanazawa e-Publishing Co., Ltd. AN - OPUS4-26901 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -