TY - CONF A1 - Wolf, Julia A1 - Mielentz, Frank A1 - Milmann, Boris A1 - Helmerich, Rosemarie A1 - Köpp, Christian A1 - Wiggenhauser, Herbert A1 - Kurz, J.H. A1 - Moryson, R.M. A1 - Samokrutov, A. A1 - Alekhin, S. G. A1 - Alver, Ninel A1 - Sazak, H.Ö. T1 - An ultrasound monitoring system for concrete structures N2 - The research project "Ultrasonic Net for Concrete Monitoring (UNeCOM)" aims at developing a methodology for an embedded ultrasonic network for the condition assessment of infrastructure constructions. Civil engineering structures made of concrete, which are located in tectonically active regions or undergo special loading conditions, may require continuous monitoring. It is important to assess the condition of the building and its stability to recognise and classify the effect of a seismic event or evolving damage at early stages before failure occurs. Embedded ultrasonic sensors offer the possibility to detect changes in the material and degradation mechanisms from inside the structure in areas which are difficult or impossible to inspect otherwise. In contrast to conventional ultrasonic testing methods, where the concrete surfaces are scanned with ultrasound probes, this new approach uses sensors, which are embedded into concrete, eliminating the effect of variable coupling conditions between sensors and concrete. This method allows an integral detection of changes in the concrete structure, for example due to seismic activities, to detect mechanical impacts, as well as degradation of the material due to overloading. Such methods have great relevance especially for the monitoring of constructions like power plants, bridges, offshore structures and other structures with high technical safety requirements. The sensor network can be controlled remotely through the internet which is also being used for data transfer. The embedded sensor network is designed to monitor structural damage and concrete degradation globally with high sensitivity. T2 - Istanbul bridge conference 2014 CY - Istanbul, Turkey DA - 11.08.2014 KW - Ultrasound KW - Concrete KW - Monitoring PY - 2014 SN - 978-605-64131-6-2 SP - Paper 32, 1 EP - 9 AN - OPUS4-32028 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Helmerich, Rosemarie A1 - Milmann, Boris A1 - Wöstmann, Jens A1 - Feistkorn, S. ED - Barros, J. ED - Sena-Cruz, J. T1 - Durability of CFRP-laminate strengthening N2 - First bridge structures have been strengthened by means of Carbon-Fiber-Reinforced-Polymer (CFRP)-laminates extemally glued to the concrete surface in the last two decades. At present there is no Information about the durability of these Systems after having been in Service for more than ten years. The paper presents laboratory tests and case studies with automated non-destructive testing to analyse the current bond condition of extemally bonded CFRP-laminates to concrete structures, strengthened about ten years ago. The paper presents the feasibility and the limitations of ultrasonic inspection of selected areas of CFRP-laminate-strengthened structures co-funded by the German Center of Competence in Civil Engineering (DIBt) in a national project. Areas of interest were the end region of laminates or areas with educated doubts about their bond integrity selected and marked in the inspection records during main inspections. In a feasability study, the functionality of the ultrasonic test for bond evaluation below CFRP-laminates without any surface protection measure, was confirmed by testing a CFRP-laminate strengthened slab with artificial voids in a blind laboratory test with an accuracy of + 1 cm. The accuracy depends on the step width, line interspace and the distance between ultrasonic transducer and receiver. This accuracy suits a measuring grid of 1 cm. The case studies consider flexural strengthening and repair of prestressed concrete structures as well as longitudinal and transverse strengthening of bridge slabs with simple reinforcement. Both alternatives were considered, covered with mineral surface protection layer and without. The measurement results of automated scanned surfaces is presented in color-codes images. In the tested areas with no or thin surface protection the non-destructive inspection did not uncover severe defects or Deterioration processes. None the less, proposals for further research is given, in testing of the acceptable bond defects and in advancing the ultrasonic test including the devlopment of sensors for this application. T2 - FRPRCS-11 - 11th International symposium on fiber reinforced polymer for reinforced concrete structures CY - Guimaraes, Portugal DA - 26.06.2013 KW - CFRP-Laminate KW - Debonding KW - Flexural strengthening KW - Bridge KW - NDT KW - Durability test KW - Inspection PY - 2013 SN - 978-972-8692-84-1 SP - 41 EP - 42 (Session 6.5) AN - OPUS4-28859 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Helmerich, Rosemarie A1 - Milmann, Boris A1 - Wöstmann, Jens A1 - Röllig, Mathias A1 - Kind, Thomas A1 - Lai, W. T1 - Qualitätssicherung für textilfaserverstärkten Beton N2 - Beim Bauen im Bestand ist die zusätzlich aufzunehmende Last in der Regel zu beschränken. Das trifft insbesondere für schon gerissene Elemente wie Gewölbe odör alternde Betonkonstruktionen zu. Da Hochleistungsfasern wie Textilgelege aus Carbonfasern oder alkaliresistenten (AR-)Glasfasern keinen Korrosionsschutz erfordern, kann die Verbundschicht aus Feinkornbeton dünn gehalten werden, um das Bauwerk nur mit einer Mindestzusatzlast zu beanspruchen. Textilbeton heißt die neue Bauweise, für die es zurzeit noch kein festgeschriebenes Qualitätssicherungs- und Wartungskonzept für Bau und die spätere Nutzung gibt. T2 - 5. Anwendertagung Textilbeton CY - Friedrichshafen, Germany DA - 24.09.2013 KW - Textilfaserverstärkter Beton KW - Zerstörungsfreie Prüfung KW - Ultraschall-Echo KW - Radar-Echo PY - 2013 VL - 9 SP - 22 AN - OPUS4-29512 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Helmerich, Rosemarie A1 - Niederleithinger, Ernst A1 - Milmann, Boris A1 - Wöstmann, Jens A1 - Röllig, Mathias A1 - Feldmann, Rüdiger A1 - Täljsten, B. ED - Masoud Motavalli, T1 - Near surface mounted CFRP-rods - preparation of reinforcing measures and quality control by means of non-destructive testing T2 - 4th International Conference on FRP Composites in Civil Engineering (CICE2008) CY - Zurich, Switzerland DA - 2008-07-22 PY - 2008 SN - 978-3-905594-50-8 SP - 1 EP - 6 AN - OPUS4-17747 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Helmerich, Rosemarie A1 - Mielentz, Frank A1 - Milmann, Boris A1 - Adam, Louisa A1 - Villalobos, S. A1 - Guimaraes, M. A1 - Wiggenhauser, Herbert T1 - Detection of cracks perpendicular to the surface using acoustic methods N2 - Cracks perpendicular to the surface may be initial indicators for a deterioration process of concrete structures. Moisture penetrates inside the structure and transports adverse chemicals. The paper presents an investigation about the reliability of available commercial non-destructive evaluation techniques to reliably estimate the depth of surface-breaking cracks in reinforced concrete structures. Aim of the study was the investigation of surface-braking cracks under laboratory conditions. Commercial acoustic devices as impact echo equipment, single ultrasonic transducers and arrays were applied even if they have not been developed for this purpose. The commercial software and descriptions for application was followed strictly to compare the function, precision and repeatability of the measurements. Both, perpendicular notches and cracks have been considered. The study was completed with a discussion about reference specimens. The study was the basis for formulation of gaps in research. The Electric Power Research Institute (EPRI) has initiated and funded a Project. T2 - NDT-CE 2015 - International symposium non-destructive testing in civil engineering CY - Berlin, Germany DA - 15.09.2015 KW - Acoustic test KW - Commercial acoustic devices KW - Ultrasonic test KW - Crack depth KW - Concrete specimens PY - 2015 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-345729 UR - https://www.ndt.net/?id=18412 SN - 1435-4934 VL - 20 IS - 11 SP - 1 EP - 9 PB - NDT.net CY - Kirchwald AN - OPUS4-34572 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -