TY - JOUR A1 - Helmerich, Rosemarie A1 - Bien, J. T1 - 100 Jahre Kaiserbrücke/Grunwaldzki-Brücke in Wroclaw (Polen) KW - Zustandsbewertung KW - Brückenmessung KW - Altstahl KW - Baugeschichte PY - 2012 U6 - https://doi.org/10.1002/stab.201201524 SN - 0038-9145 SN - 1437-1049 SN - 0932-6375 VL - 81 IS - 2 SP - 156 EP - 159 PB - Ernst CY - Berlin AN - OPUS4-25803 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Helmerich, Rosemarie A1 - Bien, J. A1 - Cruz, P.J.S. ED - Jan Bien, ED - Lennart Elfgren, ED - Jan Olofsson, T1 - A guideline for railway bridge inspection and condition assessment including the NDT toolbox KW - Inspection procedure KW - Bridge condition assessment KW - Railway bridges KW - Non-destructive testing KW - NDT-toolbox PY - 2007 SN - 978-83-7125-161-0 SP - 93 EP - 104 PB - Dolnoslaskie Wydawnictwo Edukacyjne CY - Wroclaw, Poland AN - OPUS4-16092 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Helmerich, Rosemarie A1 - Niederleithinger, Ernst A1 - Wiggenhauser, Herbert T1 - A toolbox with non-destructive testing methods for the condition assessment of railway bridges N2 - The unified economic structure of the European market requires a unified transport infrastructure to ensure seamless and barrierfree transportation of passengers and goods. The European commission is funding the European Integrated Project Sustainable Bridges to comply with future traffic demands. The main objective of the project is to reliably assess and upgrade the bridge infrastructure for the required increase of axle loads and transport volume. 32 Institutes from 12 countries develop unified procedures for the assessment and improvement of the existing railway bridge stock under the guidance and review of six major European railway companies. Non destructive testing (NDT) is given a high priority. One of the work packages concentrates on the potential of advanced NDT-methods and creates a toolbox with advisable methods for the condition assessment of all types of railway bridges. Although NDT-methods are implemented in the quality assurance process in many industries, their application in the railway infrastructure is not common. Only a few countries have included selected NDT-methods into advanced condition assessment procedures for the management of their bridge stock. This paper describes also current activities to enhance pulse-phase thermography, impulse-radar and acoustic methods. The advanced methods enable infrastructure owners to verify construction plans, to assess structures, repair and strengthening quality or to identify in-service damages. Latest development is an automated scanning system for combined acoustic and electromagnetic measurements. The results are then combined through data fusion techniques to further increase their value for the bridge owners. T2 - 85th TRB Annual Meeting CY - Washington, DC, USA DA - 2006-01-22 KW - Non-Destructive Testing KW - Thermography KW - Railway Bridges KW - NDT-toolbox PY - 2006 SP - 1 EP - 12(?) PB - TRB CY - Washington, D.C. AN - OPUS4-12037 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Helmerich, Rosemarie A1 - Krause, Martin A1 - Mielentz, Frank A1 - Milmann, Boris T1 - Acoustic measurement methods T2 - Technical course in non-destuctive testing and monitoring for bridge engineers CY - Ängelholm, Sweden DA - 2008-05-14 PY - 2008 AN - OPUS4-17591 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Helmerich, Rosemarie T1 - Active Thermography N2 - Active thermography is a nondestructive testing method for identification of near surface defects and signs of early deterioration. The presentation explains the potential and Limits of the method and the equipment for application to concrete structures. Advanced data analysis can increase the quality of imaging of the measurement. The method is usually applied once for analysis of the current condition. If applied periodically, the method can be used for observation of a deterioration process. T2 - NDT&E Advanced Training Workshop 2016 CY - Berlin, Germany DA - 14.07.2016 KW - Active thermography KW - Nondestructive testing KW - Data analysis KW - Imaging KW - Bond defect detection KW - Defect localization KW - Automated scanning PY - 2016 AN - OPUS4-38478 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Helmerich, Rosemarie T1 - Active thermography N2 - Active thermography is introduced as tool for diagnostics in civil engineering structures. Aside from basic information, examples for applications of active thermography in different types of structures was presented. Active thermography was applied in historic structures to reveal former components or even ancient openings. Other examples present active thermography as a tool for nondestructive detection of debonding in CFRP strengthened structures. The way is explained, how the system was optimized for different materials. T2 - NDT&E Advanced Training Workshop CY - Berlin, Germany DA - 05.07.2017 KW - Active thermography KW - Strengthening KW - Nondestructive testing KW - Civil structures PY - 2017 AN - OPUS4-42920 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Portella, Pedro Dolabella A1 - Helmerich, Rosemarie T1 - Adolf Martens and his contribution to materials engineering N2 - Adolf Martens (1850–1914) was a pioneer of materials engineering. After his studies in Berlin he joined a railway company being responsible for the technical equipment. His interest for the basic mechanisms of mechanical strength and fracture of metallic materials led him to the development of the basic concepts for metallography; his papers published between 1878 and 1889 laid the fundament of this technique. In 1880 Martens changed to the Royal Industrial Academy in Berlin and by 1884 he was designated as director of the Materials Testing Laboratory at the Technical University Berlin. Under his guidance this institution acquired an excellent reputation in all relevant areas of the German industry, forming the nucleus of the Bundesanstalt für Materialforschung und -prüfung (BAM) – the Federal Institute for Materials Research and Testing. Martens developed equipment in many different areas as mechanical testing of metallic materials and of paper, characterization of the wear behavior of materials and viscosity of lubricants. His overwhelming contribution to materials engineering was recognized as early as 1895 by Floris Osmond, who denominated martensite a metallographical constituent resulting from quenching of steels. In 2000 ISO designated the value obtained from the instrumented indentation method as Martens Hardness – HM. KW - Adolf Martens KW - Microscopy KW - Metallography KW - Mechanical testing KW - Quality assurance in materials testing PY - 2014 U6 - https://doi.org/10.1016/j.engfailanal.2014.03.001 SN - 1350-6307 SN - 1873-1961 VL - 43 IS - Special Issue 'A Tribute to Prof. A. Martens' SP - 2 EP - 10 PB - Elsevier Science Publ. CY - Oxford AN - OPUS4-30865 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Helmerich, Rosemarie T1 - Alte Stähle und Stahlkonstruktionen N2 - Für den Entwurf neuer Bauwerke gewährleistet die Einhaltung aktuell gültiger Normenwerke eine ausreichende Sicherheit. Diese Normen und die zugehörigen Lieferbedingungen gelten ausschließlich für Neubauten aus heute produzierten Stählen. Technische Regeln für die Begutachtung alter Materialien, wie sie zuletzt im Beiblatt 2-"Altstahl im Hochbau" von 1948 zur DIN 1050 "Stahl im Hochbau" [35] verankert waren, sind zurückgezogen worden. Bei der Bewertung alter Baukonstruktionen greift man häufig auf vorhandene Materialinformationen aus Bauwerksunterlagen, Vorschriften und Berechnungen, z.B. im Verantwortungsbereich der Deutschen Bahn AG, zurück. Die geltende Richtlinie der Modulfamilie 805.001 der Deutschen Bahn AG [21] erlaubt in Abschnitt 2, Absatz (2) sogar ausdrücklich die Nutzung alter Berechnungen und Vorschriften, wenn bei gleich bleibender Nutzung nur Eingriffe von untergeordneter Bedeutung, wie kleine Reparaturen oder lokale Verstärkungen, vorgenommen werden. Ein Eingriff in die Tragsicherheit des Bauwerkes ist nicht zulässig. Für umfassendere Maßnahmen und für Bauwerke außerhalb des Zuständigkeitsbereiches der Deutschen Bahn AG oder für die Bewertung der Konstruktionen bei Umnutzung bzw. bei umfangreichen Maßnahmen ist diese Ausnahme nicht anwendbar. Daraus ergibt sich für den auf die Beurteilung und Bewertung von bestehenden Bauwerken spezialisierten Ingenieur der Bedarf, alte Materialien, Bauweisen und Vorschriften zu kennen und zu verstehen. Aufwändige Versuchsserien an originalen Vollwand- und Fachwerkträgern zur Ermittlung von Schadensmechanismen im einstufigen Ermüdungsversuch werden vorgestellt. Sie resultieren in erweiterten Kenntnissen über Versagenskriterien für genietete Bauteile. Die Weiterentwicklung und Erprobung einander ergänzender zerstörungsfreier und minimal-invasiver (zerstörungsarmer) Verfahren verbessert die Schadensfrüherkennung an ermüdungsbeanspruchten Stahlkonstruktionen, z.B. bei Inspektionen. Intensive Materialuntersuchungen zur Mikrostruktur und zu mechanischen Materialparametern tragen zum Verständnis bestimmter, für moderne Stähle untypischer, Schadensmechanismen bei. Die interdisziplinäre Kooperation mit den Laboratorien der Abteilungen V, VIII und S bei der Analyse von Rissentstehung und Risswachstum erweitert die verfügbaren Kenntnisse über das Versagensverhalten alter Stähle und Stahlverbindungen. Aufbauend auf einer Darstellung der Entwicklung alter Bauweisen und Bauwerke, einer Literatur- und Normenanalyse zu Lieferbedingungen von Stahl für das Bauwesen und zu konstruktiven Details, so wie sie um die Jahrhundertwende zwischen dem 19. und 20. Jh. üblich waren, werden Materialuntersuchungen an alten Stählen, Ermüdungsversuche und Messungen an bestehenden Brückenbauwerken aus alten Stählen präsentiert. Innerhalb des Projektes gab es eine enge Zusammenarbeit mit Brückenbetreibern, die gewährleistete, dass die Ergebnisse aus Prüfungen, Forschung und Entwicklung direkt in die Praxis, aber auch in interne Vorschriften der Brückeneigner überführt werden konnten. So wurde in der Subgroup Remaining Fatigue Life of Bridge Structures der Gruppe ECOBRIDGE der Europäischen Eisenbahn Vereinigung UIC unter Beteiligung der BAM eine Machbarkeitsstudie [1] zusammengestellt. Auf dieser Basis erarbeitete ein bilaterales Konsortium der Schweiz und Deutschlands im Auftrag der Schweizerischen Bundesbahn und der Deutschen Bahn mit Ermüdungsspezialisten der RWTH Aachen, der EPFL Lausanne und der BAM einen Vereinheitlichten Sicherheitsnachweis für die Beurteilung alter Eisenbahnbrücken aus Stahl [2]. Der Abschlussbericht liegt seit 2001 im federführenden Institut für Stahlbau der RWTH Aachen vor. Die Überführung der Forschungsergebnisse in eine Richtlinie der Europäischen Konvention für Stahlbau (EKS) mit empfehlendem Charakter liegt als Entwurf [4] vor. Die Veröffentlichung nach abschließender Begutachtung durch namhafte auf Altstahl und Ermüdung spezialisierte Fachkollegen durch die EKS ist in Vorbereitung. T3 - BAM Forschungsberichtreihe - 271 PY - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-1800 SN - 978-3-86509-362-0 SN - 0938-5533 VL - 271 SP - 1 EP - 86 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-180 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wolf, Julia A1 - Mielentz, Frank A1 - Milmann, Boris A1 - Helmerich, Rosemarie A1 - Köpp, Christian A1 - Wiggenhauser, Herbert A1 - Kurz, J.H. A1 - Moryson, R.M. A1 - Samokrutov, A. A1 - Alekhin, S. G. A1 - Alver, Ninel A1 - Sazak, H.Ö. T1 - An ultrasound monitoring system for concrete structures N2 - The research project "Ultrasonic Net for Concrete Monitoring (UNeCOM)" aims at developing a methodology for an embedded ultrasonic network for the condition assessment of infrastructure constructions. Civil engineering structures made of concrete, which are located in tectonically active regions or undergo special loading conditions, may require continuous monitoring. It is important to assess the condition of the building and its stability to recognise and classify the effect of a seismic event or evolving damage at early stages before failure occurs. Embedded ultrasonic sensors offer the possibility to detect changes in the material and degradation mechanisms from inside the structure in areas which are difficult or impossible to inspect otherwise. In contrast to conventional ultrasonic testing methods, where the concrete surfaces are scanned with ultrasound probes, this new approach uses sensors, which are embedded into concrete, eliminating the effect of variable coupling conditions between sensors and concrete. This method allows an integral detection of changes in the concrete structure, for example due to seismic activities, to detect mechanical impacts, as well as degradation of the material due to overloading. Such methods have great relevance especially for the monitoring of constructions like power plants, bridges, offshore structures and other structures with high technical safety requirements. The sensor network can be controlled remotely through the internet which is also being used for data transfer. The embedded sensor network is designed to monitor structural damage and concrete degradation globally with high sensitivity. T2 - Istanbul bridge conference 2014 CY - Istanbul, Turkey DA - 11.08.2014 KW - Ultrasound KW - Concrete KW - Monitoring PY - 2014 SN - 978-605-64131-6-2 SP - Paper 32, 1 EP - 9 AN - OPUS4-32028 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Helmerich, Rosemarie T1 - Analýza skôd v pozemných stavbách pomocou nedestruktívneho skúsania (Schadensdiagnose im Hochbau mit Hilfe Zerstörungsfreier Prüfung) T2 - Workshop an der Akademie der Wissenschaften, Institut für Architektur und Bauwesen CY - Bratislava, Slovakia DA - 2005-02-21 PY - 2005 AN - OPUS4-7058 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -