TY - CONF A1 - Maierhofer, Christiane A1 - Arndt, Ralf A1 - Röllig, Mathias A1 - Helmerich, Rosemarie A1 - Walther, A. A1 - Hillemeier, B. A1 - Rieck, C. T1 - Quantification of Voids and Elaminations in Real Concrete and Masonry Structures with Active Thermography: Case Studies T2 - 8th International Conference on Quantitative InfraRed Thermography (QIRT 2006) CY - Padova, Italy DA - 2006-06-28 KW - Non-destructive testing in civil engineering KW - Active thermography KW - Pulse-phase thermography KW - Plaster KW - Tiles KW - Asphalt KW - Numerical simulation PY - 2006 UR - http://qirt.gel.ulaval.ca/archives/qirt2006/papers/049.pdf SP - 49, 1 EP - 10 (?) CY - Padova, Italy AN - OPUS4-15710 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Helmerich, Rosemarie A1 - Röllig, Mathias A1 - Maierhofer, Christiane A1 - Schultz, A. A1 - Vielhaber, J. A1 - Loehr, M. T1 - Non-destructive CFRP-bond evaluation T2 - 8th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-8) CY - Patras, Greece DA - 2007-07-16 KW - Bond behaviour KW - Impulse thermography KW - Effectiveness of repair KW - CFRP-strengthening KW - Large scale testing KW - Validation KW - Acoustic emission KW - Combination of NDT-methods PY - 2007 SP - 106-107 (2-24) CY - Patras, Greece AN - OPUS4-15706 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Arndt, Ralf A1 - Helmerich, Rosemarie A1 - Maierhofer, Christiane A1 - Röllig, Mathias ED - Forde, M. T1 - Quantitative Pulse-Phase-Thermography for Composites and Concrete Structures N2 - The active approach for non-destructive-testing in Civil Engineering (NDT-CE) with infraredthermography (IR), developed at the Federal Institute for Materials Research and Testing (BAM), is described in part one of this contribution. The active IR-approach is based on the principles of impulse- (IT) and pulse-phase-thermography (PPT). The concept is a direct result of a research project at the BAM in cooperation with the Technical University of Berlin (TUB) and was funded by the Deutsche Forschungsgemeinschaft (DFG). In the second part results of the new thermography-scanning system (thermo-scanner) of BAM on debonding of multi-layered structures, especially carbon fibre reinforced plates (CFRP) on concrete are presented. Both, the thermo-scanner developed at BAM, and the investigations carried out, are part of the EU-Project Sustainable Bridges. In the third part of the paper the characteristic frequency of the optimum phase-contrast as a means for the characterization of defects’ depth in CE by means of PPT is introduced. A new quantitative approach is tested and discussed on concrete structures with defects of polystyrene and gas concrete. T2 - 11th International Conference and Exhibiton "Structural Faults and Repair - 2006" CY - Edinburgh, Scotland, UK DA - 2006-06-13 KW - Quantitative NDT KW - Impulse-thermography KW - Pulse-phase-thermography KW - Blind / characteristic frequency KW - Concrete KW - Thermo-scanner KW - CFRP-laminates KW - Debonding KW - Voids PY - 2006 SN - 0-947644-59-8 SP - 1(?) EP - 17(?) PB - Engineering Technics Pr., CY - Edingburgh AN - OPUS4-13794 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -