TY - CONF A1 - Helmerich, Rosemarie T1 - Practical applications of recent BAM-research results of NDT and monitoring in civil engineering N2 - Nondestructive testing and monitoring was of mayor interest in BAM-research related to the survey of civil engineering structures during the last two decades. Three case studies about research projects carried out at BAM were presented. All three projects focussed on the survey of parameters and safety related tasks in bridge engineering and inspection. First, the monitoring of the Berlin main station was presented with focus on the sensors developed specifically for this project. The second case study presented and application of guided ultrasonic waves to CFRP-strengthened bridges. The method was sucsessully applied to two of four different strengthening measures carried out min. 10 years ago. The last project presented the feasibility study of a network consisting of simple Bluetooth modules to survey changes in the moisture content in sand and massive concrete. T2 - Workshop CY - University of New South Wales, Sydney, Australia DA - 17.07.2018 KW - Monitoring KW - Wireless sensor network (WSN), KW - NDT KW - Guided waves KW - Bluetooth modules KW - Inspection KW - Civil infrastructure PY - 2018 AN - OPUS4-45657 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Helmerich, Rosemarie T1 - Is data obtained through Non-destructive Testing reliable? N2 - Civil engineers, who are involved in nondestructive testing have to solve an essential task: the transfer of the results of NDT-research into practice. NDT in civil Engineering is a quite new discipline. The results must meet the needs of the infrastructure owners to convince them about the usefulness of NDT. The issue of reliability of the NDT-data was discussed. T2 - Reliability Workshop Polytechnical University HongKong CY - Hong Kong, China DA - 06.04.2016 KW - Civil infrastructure KW - Reliability KW - POD KW - NDT PY - 2016 AN - OPUS4-37545 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Helmerich, Rosemarie A1 - Milmann, Boris A1 - Wöstmann, Jens A1 - Feistkorn, S. ED - Barros, J. ED - Sena-Cruz, J. T1 - Durability of CFRP-laminate strengthening N2 - First bridge structures have been strengthened by means of Carbon-Fiber-Reinforced-Polymer (CFRP)-laminates extemally glued to the concrete surface in the last two decades. At present there is no Information about the durability of these Systems after having been in Service for more than ten years. The paper presents laboratory tests and case studies with automated non-destructive testing to analyse the current bond condition of extemally bonded CFRP-laminates to concrete structures, strengthened about ten years ago. The paper presents the feasibility and the limitations of ultrasonic inspection of selected areas of CFRP-laminate-strengthened structures co-funded by the German Center of Competence in Civil Engineering (DIBt) in a national project. Areas of interest were the end region of laminates or areas with educated doubts about their bond integrity selected and marked in the inspection records during main inspections. In a feasability study, the functionality of the ultrasonic test for bond evaluation below CFRP-laminates without any surface protection measure, was confirmed by testing a CFRP-laminate strengthened slab with artificial voids in a blind laboratory test with an accuracy of + 1 cm. The accuracy depends on the step width, line interspace and the distance between ultrasonic transducer and receiver. This accuracy suits a measuring grid of 1 cm. The case studies consider flexural strengthening and repair of prestressed concrete structures as well as longitudinal and transverse strengthening of bridge slabs with simple reinforcement. Both alternatives were considered, covered with mineral surface protection layer and without. The measurement results of automated scanned surfaces is presented in color-codes images. In the tested areas with no or thin surface protection the non-destructive inspection did not uncover severe defects or Deterioration processes. None the less, proposals for further research is given, in testing of the acceptable bond defects and in advancing the ultrasonic test including the devlopment of sensors for this application. T2 - FRPRCS-11 - 11th International symposium on fiber reinforced polymer for reinforced concrete structures CY - Guimaraes, Portugal DA - 26.06.2013 KW - CFRP-Laminate KW - Debonding KW - Flexural strengthening KW - Bridge KW - NDT KW - Durability test KW - Inspection PY - 2013 SN - 978-972-8692-84-1 SP - 41 EP - 42 (Session 6.5) AN - OPUS4-28859 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Niederleithinger, Ernst A1 - Helmerich, Rosemarie A1 - Wiggenhauser, Herbert ED - Cruz, P. ED - Frangopol, D. T1 - Trends in bridge condition assessment using non-destructive testing methods T2 - Bridge Maintenance, Safety, Management, Life-Cycle Performance and Cost CY - Porto, Portugal DA - 2006-07-16 KW - NDT KW - Condition assessment KW - Automation of measurement KW - Data fusion PY - 2006 SN - 0-415-40315-4 N1 - Serientitel: Balkema proceedings and monographs in engineering, water and earth sciences – Series title: Balkema proceedings and monographs in engineering, water and earth sciences SP - 933 EP - 934 PB - Taylor & Francis CY - London AN - OPUS4-14037 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Niederleithinger, Ernst A1 - Helmerich, Rosemarie T1 - Sustainable Bridges - NDT as a Tool to Assist Railway Bridge Management T2 - NDE Conference on Civil Engineering CY - St. Louis, Missouri, USA DA - 2006-08-14 KW - Railways KW - Bridges KW - NDT KW - Condition assessment PY - 2006 SN - 1-57117-148-7 SP - 196 EP - 204 PB - ASTM CY - St. Louis AN - OPUS4-14436 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -