TY - CONF A1 - Helmerich, Rosemarie A1 - Häcker, Ralf A1 - Zunkel, Astrid ED - Biliszczuk, Jan ED - Bien, Jan T1 - Cast iron arch bridges - part of the world heritage N2 - Cast iron arch bridges were built in the late 18th and early 19th century across Europe. After the famous Iron Bridge in the Ironbridge Gorge in Coalbrookdale in England, being now part of the UNESCO world heritage, many cast iron bridges followed and substituted timber bridges. A series of cast iron bridges has been built in central Europe, in Laasan, Breslau, (now Wrocław), in Berlin, Potsdam, Bad Muskau and Schwerin. The paper gives an overview about the current state of some remaining cast iron arch bridges, typical damage cases, material properties and rehabilitation. Most of the old cast iron arch bridges serve as pedestrian bridges. Some of these bridges have been strengthened to increase the traffic load. Different rehabilitation measures as substitution of parts of the bridges and strengthening using Carbon Reinforced Polymers (CFRP) are discussed. T2 - Arch 2016 CY - Wroclaw, Poland DA - 05.10.2016 KW - Arch bridges KW - Cast iron KW - Materials parameters KW - Rehabilitytion PY - 2016 SN - 978-83-7125-265-5 SP - 194 EP - 197 PB - Dolnośląskie wydawnictwo edukacyjne CY - Wroclaw, Poland AN - OPUS4-38476 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Helmerich, Rosemarie ED - Frangopol, Dan ED - Bittencourt, Tulio N. ED - Beck, André T. T1 - Bridge knowledge management using ontologies N2 - The amount of new knowledge about bridges, materials they are made of, deterioration processes for the different materials, resulting defects, methods for early detection of them and related causes for damage increases day by day. Often the knowledge remains in the heads of ageing specialists leaving the inspection teams or universities. This paper presents a feasibility study about application of a new tool from artificial intelligence to model and organize bridge engineering knowledge from a domain expert´s view. Exemplarily, knowledge and not only data from bridge testing in the field and in the laboratory were formalized for the presentation of the functionality of ontologies. T2 - IABMAS Conference 2016 CY - Foz Do Iguacu, Brasilien DA - 26.06.2016 KW - Ontology KW - riveted steel bridges KW - Bridge knowledge KW - representation of knowledge PY - 2016 SN - 1138028517 SP - 455 EP - 455 PB - CRC PRess Balkema CY - Leiden, Netherlands AN - OPUS4-38494 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bartholmai, Matthias A1 - Werner, Klaus-Dieter A1 - Kohlhoff, Harald A1 - Helmerich, Rosemarie A1 - Daum, Werner ED - Aulova, Alexandra ED - Rogelj Ritonja, A. ED - Emri, I. T1 - Long-Term measurement of vertical displacements at the outer concrete bridges of the Berlin Main Station N2 - Berlin Main Station is the largest multi-level station in Europe. Its daily passenger number amounts to over 300.000. Structures built for such a large number of people require a high-level safety standard. The station was built on the inner city site of the historic Lehrter Bahnhof. The conditions for building and start of operation were challenging by several reasons. The typical sandy ground with a high level of groundwater makes the permanent static stability of such a complex structure difficult. Several completed, ongoing, and planned construction activities in the immediate vicinity of the station influence the ground settlement of the whole area. On basis of the structural design an impact prediction was calculated, which expected certain vertical displacements particularly between the single columns of the outer concrete bridges of the building. These columns support the glass roof construction, which only allows a defined limit of displacement. In order to avoid damage, a concept for monitoring and adjusting potentially occurring displacements was developed for installation at the outer bridges of the station. T2 - 33rd Danubia- Adria Symposium on Advances in Experimental Mechanics CY - Portorož, Slovenia DA - 20.09.2016 KW - Berlin Main Station KW - Differential displacements KW - Hydraulic levelling system KW - Laser-based displacement measuring system KW - Monitoring KW - Strain measurements PY - 2016 SN - 978-961-94081-0-0 SP - 166 EP - 167 CY - Ljubljana AN - OPUS4-37646 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Helmerich, Rosemarie ED - Bittencourt, Tulio Nogueira ED - Frangopol, Dan ED - Beck, Andre T1 - Bridge knowledge management using ontologies N2 - The amount of new knowledge about bridges, about the materials they are made of, deterioration processes for the different materials, typical defects, methods for early detection of them and related causes for damage increases day by day. Often the knowledge remains in the heads of ageing specialists leaving the inspection teams or universities. This paper presents a feasibility study about application of a new tool from artificial in-telligence, ontology, for modeling and organizing bridge engineering knowledge from a domain expert´s view. Exemplarily, knowledge and not only data from bridge testing in the field and in the laboratory were formalized for the presentation of the functionality of ontologies. The open source ontology editor Protégé was ap-plied to test the feasibility. T2 - IABMAS Conference 2016 CY - Foz Do Iguacu, Brazil DA - 26.06.2016 KW - Knowledge Representation KW - Ontology KW - Bridge Knowledge KW - Riveted Bridges PY - 2016 SN - ISBN 9781138028517 PB - CRC Press AN - OPUS4-38082 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Moldenhauer, Laura A1 - Helmerich, Rosemarie A1 - Köppe, Enrico A1 - Haamkens, Frank A1 - Wittmann, Jochen ED - Aulova, Alexandra ED - Rogelj Ritonja, Alenka ED - Emri, Igor T1 - Experimental feasibility study about moisture in building materials measured with bluetooth N2 - Structural health monitoring contributes to early damage detection in the built infrastructure. During the last two decades, the sensor networks transferred from wired to wireless sensor networks. Several methods exist to measure moisture in building materials. Most of the introduced commercial humidity measurement methods as provide information about the local or near surface moisture. A feasibility study is presented to demonstrate, how the Received Signal Strength Indicator (RSSI) of a BlueTooth® Low Energy (BLE) signal, transmitted from the BLE-module embedded in building materials with changing moisture content. The BLE-module communicates with a mobile Smart Device as tablet or mobile phone. The RSSI indicates to what extend the received signal strength is changed due to moisture, while the transmitted signal strength remains constant. T2 - The 33rd Danubia Adria Symposium on Advances in experimental mechanics CY - Portoroz, Slovenia DA - 20.09.2016 KW - Bluetooth KW - Moisture KW - Measurement KW - Water dipoles KW - RSSI PY - 2016 SN - 978-961-94081-0-0 SP - 60 EP - 61 PB - SSEM--Slovene Society of Experimental Mechanics CY - Ljubljana, Slovenia AN - OPUS4-38086 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Moldenhauer, Laura A1 - Helmerich, Rosemarie A1 - Köppe, E. A1 - Wittmann, J. ED - Cosmi, F. T1 - Experimental modeling approach for determining the moisture damping exponent of a Bluetooth Low Energy signal in moist building material N2 - The presented development of a damping model is a research component of an experimental feasibility study about moisture in building materials measured with Bluetooth® Low Energy (BLE) signals. This study may be part of a structural health monitoring aiming on early damage detection in the built infrastructure and is increasingly focusing on wireless sensor Network technology. It is investigated, how the Received Signal Strength Indicator (RSSI) of a BLE signal, transmitted from the BLE-module embedded in building materials with changing moisture content is damped. The BLE-module communicates with a mobile Smart Device as tablet or mobile phone via 2.45 GHz-ISMfrequency band where water dipoles start to oscillate. If the BLE-signal transfers through a moist material, the moisture Content influences the RSS-Indicator. The damping model demonstrates this damping effect on RSSI by the abstraction of the reality observed in a real system. T2 - 34th Danube Adria Symposium CY - Trieste, Italy DA - 19.09.2017 KW - Moisture damping coefficient, KW - Buliding materials KW - Bluetooth Low Energy KW - RSSI KW - Experimental approach PY - 2017 SN - 978-88-8303-863-1 DO - https://doi.org/https://www.openstarts.units.it/handle/10077/14834 SP - 141 EP - 142 CY - Trieste, Italy AN - OPUS4-44528 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wolf, Julia A1 - Mielentz, Frank A1 - Milmann, Boris A1 - Helmerich, Rosemarie A1 - Köpp, Christian A1 - Wiggenhauser, Herbert A1 - Kurz, J.H. A1 - Moryson, R.M. A1 - Samokrutov, A. A1 - Alekhin, S. G. A1 - Alver, Ninel A1 - Sazak, H.Ö. T1 - An ultrasound monitoring system for concrete structures N2 - The research project "Ultrasonic Net for Concrete Monitoring (UNeCOM)" aims at developing a methodology for an embedded ultrasonic network for the condition assessment of infrastructure constructions. Civil engineering structures made of concrete, which are located in tectonically active regions or undergo special loading conditions, may require continuous monitoring. It is important to assess the condition of the building and its stability to recognise and classify the effect of a seismic event or evolving damage at early stages before failure occurs. Embedded ultrasonic sensors offer the possibility to detect changes in the material and degradation mechanisms from inside the structure in areas which are difficult or impossible to inspect otherwise. In contrast to conventional ultrasonic testing methods, where the concrete surfaces are scanned with ultrasound probes, this new approach uses sensors, which are embedded into concrete, eliminating the effect of variable coupling conditions between sensors and concrete. This method allows an integral detection of changes in the concrete structure, for example due to seismic activities, to detect mechanical impacts, as well as degradation of the material due to overloading. Such methods have great relevance especially for the monitoring of constructions like power plants, bridges, offshore structures and other structures with high technical safety requirements. The sensor network can be controlled remotely through the internet which is also being used for data transfer. The embedded sensor network is designed to monitor structural damage and concrete degradation globally with high sensitivity. T2 - Istanbul bridge conference 2014 CY - Istanbul, Turkey DA - 11.08.2014 KW - Ultrasound KW - Concrete KW - Monitoring PY - 2014 SN - 978-605-64131-6-2 SP - Paper 32, 1 EP - 9 AN - OPUS4-32028 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Helmerich, Rosemarie A1 - Wiggenhauser, Herbert T1 - Non-destructive testing of concrete structures T2 - 4th International Conference on Advances in Mechanical Engineering and Mechanics (ICAMEM2008) CY - Sousse, Tunisia DA - 2008-12-16 KW - Non-destructive testing KW - Civil engineering KW - Inspection KW - Knowledge transfer KW - Case study PY - 2008 SP - 1 EP - 10 AN - OPUS4-18655 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Helmerich, Rosemarie T1 - Opportunities and limitation of non-destructive testing in condition assessment of bridge structures T2 - Munich bridge assessment conference (MBAC 2009) CY - Munich, Germany DA - 2009-05-27 KW - Non-destructive testing KW - Condition assessment KW - Data fusion KW - Concrete bridges PY - 2009 SP - 1 EP - 13 AN - OPUS4-19597 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Arndt, Ralf A1 - Helmerich, Rosemarie A1 - Maierhofer, Christiane A1 - Röllig, Mathias ED - Forde, M. T1 - Quantitative Pulse-Phase-Thermography for Composites and Concrete Structures N2 - The active approach for non-destructive-testing in Civil Engineering (NDT-CE) with infraredthermography (IR), developed at the Federal Institute for Materials Research and Testing (BAM), is described in part one of this contribution. The active IR-approach is based on the principles of impulse- (IT) and pulse-phase-thermography (PPT). The concept is a direct result of a research project at the BAM in cooperation with the Technical University of Berlin (TUB) and was funded by the Deutsche Forschungsgemeinschaft (DFG). In the second part results of the new thermography-scanning system (thermo-scanner) of BAM on debonding of multi-layered structures, especially carbon fibre reinforced plates (CFRP) on concrete are presented. Both, the thermo-scanner developed at BAM, and the investigations carried out, are part of the EU-Project Sustainable Bridges. In the third part of the paper the characteristic frequency of the optimum phase-contrast as a means for the characterization of defects’ depth in CE by means of PPT is introduced. A new quantitative approach is tested and discussed on concrete structures with defects of polystyrene and gas concrete. T2 - 11th International Conference and Exhibiton "Structural Faults and Repair - 2006" CY - Edinburgh, Scotland, UK DA - 2006-06-13 KW - Quantitative NDT KW - Impulse-thermography KW - Pulse-phase-thermography KW - Blind / characteristic frequency KW - Concrete KW - Thermo-scanner KW - CFRP-laminates KW - Debonding KW - Voids PY - 2006 SN - 0-947644-59-8 SP - 1(?) EP - 17(?) PB - Engineering Technics Pr., CY - Edingburgh AN - OPUS4-13794 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -