TY - CONF A1 - Helmerich, Rosemarie T1 - Bridge knowledge management using ontologies N2 - The amount of new knowledge about bridges, about the materials they are made of, deterioration processes for the different materials, typical defects, methods for early detection of them and related causes for damage increases day by day. Often the knowledge remains in the heads of ageing specialists leaving the inspection teams or universities. This paper presents a feasibility study about application of a new tool from artificial in-telligence, ontology, for modeling and organizing bridge engineering knowledge from a domain expert´s view. Exemplarily, knowledge and not only data from bridge testing in the field and in the laboratory were formalized for the presentation of the functionality of ontologies. The open source ontology editor Protégé was ap-plied to test the feasibility. T2 - IABMAS Conference 2016 CY - Foz Do Iguacu, Brazil DA - 26.06.2016 KW - Riveted steel bridges KW - Ontology KW - Knowledge representation PY - 2016 AN - OPUS4-38083 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Helmerich, Rosemarie T1 - Is data obtained through non-destructive testing reliable? N2 - The presentation tries to contribute an answer to the question about reliability of nondestructive evaluation of structures in civil engineering T2 - IABSE Joint summit CY - Helsinki-Barcelona, Finland / Spain DA - 10.03.2016 KW - Nondestructive testing KW - Nondestructive evaluation KW - Reliability KW - Probability of detection PY - 2016 AN - OPUS4-38085 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Helmerich, Rosemarie A1 - Zunkel, Astrid A1 - Häcker, Ralf T1 - Cast iron arch bridges - part of the world heritage N2 - Cast iron arch bridges were built in the late 18th and early 19th century across Europe. After the famous Iron Bridge in the Ironbridge Gorge in Coalbrookdale in England, being now part of the UNESCO world heritage, many cast iron bridges followed and substituted timber bridges. A series of cast iron bridges has been built in central Europe, in Laasan, Breslau, (now Wrocław), in Berlin, Potsdam, Bad Muskau and Schwerin. The paper gives an overview about the current state of some remaining cast iron arch bridges, typical damage cases, material properties and rehabilitation. Most of the old cast iron arch bridges serve as pedestrian bridges. Some of these bridges have been strengthened to increase the traffic load. Different rehabilitation measures as substitution of parts of the bridges and strengthening using Carbon Reinforced Polymers (CFRP) are discussed. T2 - 8th International Conference on arch bridges CY - Wroclaw, Poland DA - 05.10.2016 KW - Arch bridges KW - Cast iron KW - Materials parameter KW - Rehabilitation PY - 2016 AN - OPUS4-38088 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Helmerich, Rosemarie T1 - Bridge knowledge management using ontologies N2 - Bridges represent a crucial part of traffic infrastructure networks for both, freight transport and transport of people. None the less, sometimes it is not easy for infrastructure owners to manage or extract data and knowledge of interest about specific bridges from bridge management systems, e.g. along a line. In case of search for a special material parameter or for a recent strengthening measure, the selection of the wanted information may be time consuming. The search process depends on the complexity of the selected issue. The paper presents the applicability of ontologies, a new tool from artificial intelligence transferred to bridge engineering issues. Current modern ontologies consider the rules from the World Wide Web consortium (W3C), use a defined Web Ontology Language (OWL) and the Dublin Core Metadata Initiative (DCMI®) to describe the members of a domain and the relations between them in a machine readable manor. Any information, data as well as text information is broken down to a simple triple (RDF) in a subject- predicate- object relation to organize the link between them. Advantage over any type of data base is processibility due to the use of restrictions and axioms. Visualization plug-ins, as OntoGraph or GraphViz, can visualize the structure of the ontology or parts of it and the described relations. In the recent years, ontology editors like e.g. Protégé, were developed to enable domain experts to structure a specific domain. The editor is still under development. None the less, the study shows exemplarily, how an ontology for riveted steel bridges could consider results from testing in the laboratory and in the field. Besides typical materials, typical damage processes defects and structures, applicable methods are formalized, classified and described. Queries using e.g. DL-Query may address tasks of interest and extract it from the ontology. T2 - IABMAS Conference 2016 CY - Foz do Iguacu, Brazil DA - 26.06.2016 KW - Bridge KW - Bridge testing KW - Defect KW - Semantic knowledge management KW - Ontology PY - 2016 AN - OPUS4-38477 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Helmerich, Rosemarie T1 - Active Thermography N2 - Active thermography is a nondestructive testing method for identification of near surface defects and signs of early deterioration. The presentation explains the potential and Limits of the method and the equipment for application to concrete structures. Advanced data analysis can increase the quality of imaging of the measurement. The method is usually applied once for analysis of the current condition. If applied periodically, the method can be used for observation of a deterioration process. T2 - NDT&E Advanced Training Workshop 2016 CY - Berlin, Germany DA - 14.07.2016 KW - Active thermography KW - Nondestructive testing KW - Data analysis KW - Imaging KW - Bond defect detection KW - Defect localization KW - Automated scanning PY - 2016 AN - OPUS4-38478 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Helmerich, Rosemarie A1 - Milmann, Boris A1 - Hong, S. T1 - Reinforcement corrosion detection with ultrasonic echo before cracking T2 - Danube Adria Symposium CY - Stary Smokovec, Slowakei DA - 2015-09-21 PY - 2015 AN - OPUS4-34450 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Helmerich, Rosemarie A1 - Mielentz, Frank A1 - Milmann, Boris A1 - Adam, Louisa A1 - Wiggenhauser, Herbert A1 - Guimaraes, M. A1 - Villalobos, S. T1 - DETECTION OF CRACKS PERPENDICULAR TO THE SURFACE USING ACOUSTIC METHODS T2 - NDT-CE 2015 CY - Berlin, Germany DA - 2015-09-15 PY - 2015 AN - OPUS4-34451 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Helmerich, Rosemarie T1 - Active thermography N2 - Active thermography is introduced as tool for diagnostics in civil engineering structures. Aside from basic information, examples for applications of active thermography in different types of structures was presented. Active thermography was applied in historic structures to reveal former components or even ancient openings. Other examples present active thermography as a tool for nondestructive detection of debonding in CFRP strengthened structures. The way is explained, how the system was optimized for different materials. T2 - NDT&E Advanced Training Workshop CY - Berlin, Germany DA - 05.07.2017 KW - Active thermography KW - Strengthening KW - Nondestructive testing KW - Civil structures PY - 2017 AN - OPUS4-42920 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Helmerich, Rosemarie T1 - Practical applications of recent BAM-research results of NDT and monitoring in civil engineering N2 - Nondestructive testing and monitoring was of mayor interest in BAM-research related to the survey of civil engineering structures during the last two decades. Three case studies about research projects carried out at BAM were presented. All three projects focussed on the survey of parameters and safety related tasks in bridge engineering and inspection. First, the monitoring of the Berlin main station was presented with focus on the sensors developed specifically for this project. The second case study presented and application of guided ultrasonic waves to CFRP-strengthened bridges. The method was sucsessully applied to two of four different strengthening measures carried out min. 10 years ago. The last project presented the feasibility study of a network consisting of simple Bluetooth modules to survey changes in the moisture content in sand and massive concrete. T2 - Workshop CY - University of New South Wales, Sydney, Australia DA - 17.07.2018 KW - Monitoring KW - Wireless sensor network (WSN), KW - NDT KW - Guided waves KW - Bluetooth modules KW - Inspection KW - Civil infrastructure PY - 2018 AN - OPUS4-45657 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Helmerich, Rosemarie T1 - Feasibility study about monitoring moisture inside massive concrete N2 - Current measurement methods for dertermination of moisture analyse near-surface moisture distribution. During an externally funded research project, microwaves in the Bluetooth(R) frequency band width were utilized for Setting-up a module network. Without additional sensors, the feasibility study confirmed that threedimensional data can collected to obtain a threedimensional data set as basis for the estimation of moisture distribution inside massive building materials. T2 - 2nd International Conference on Ultrahigh Performance Concrete, UHPC2018 CY - Fuzhou, China DA - 07.11.2018 KW - Moisture KW - Bluetooth KW - Microwaves KW - Monitoring PY - 2018 AN - OPUS4-46872 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Helmerich, Rosemarie A1 - Niederleithinger, Ernst A1 - Trela, Christiane A1 - Bien, J. A1 - Bernardini, G. T1 - Complex multi-tool inspection of masonry arch bridges using non-destructive testing T2 - IABMAS 2008 - Fourth International Conference on Bridge Maintenance, Safety and Management CY - Seoul, South Korea DA - 2008-07-13 PY - 2008 AN - OPUS4-17733 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Helmerich, Rosemarie A1 - Niederleithinger, Ernst A1 - Streicher, Doreen A1 - Stoppel, Markus A1 - Wiggenhauser, Herbert T1 - Automated non-destructive investigation of railway bridge condition T2 - 11th International Conference "Structural Faults and Repair - 2006" CY - Edinburgh, Scotland DA - 2006-06-13 PY - 2006 AN - OPUS4-12576 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Helmerich, Rosemarie A1 - Niederleithinger, Ernst A1 - Stoppel, Markus A1 - Wiggenhauser, Herbert T1 - The role of advanced non-destructive techniques in condition assessment of existing bridges T2 - 2nd International Conference "Reliability, Safety and Diagnostics of Transport Structures and Means 2005", University of Pardubice CY - Pardubice, Czech Republic DA - 2005-07-07 PY - 2005 AN - OPUS4-11776 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Helmerich, Rosemarie A1 - Niederleithinger, Ernst A1 - Milmann, Boris A1 - Wöstmann, Jens A1 - Röllig, Mathias A1 - Feldmann, Rüdiger A1 - Täljsten, B. T1 - Near surface mounted CFRP-rods - Preparation of reinforcing measures and quality control by means of non-destructive testing T2 - CICE 2008 - Fourth International Conference on FRP Composites in Civil Engineering CY - Zurich, Switzerland DA - 2008-07-22 PY - 2008 AN - OPUS4-17734 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Helmerich, Rosemarie A1 - Niederleithinger, Ernst A1 - Holm, G. A1 - Taffe, Alexander A1 - Wiggenhauser, Herbert T1 - Non-destructive testing of foundations and embankments T2 - Technical course in non-destuctive testing and monitoring for bridge engineers CY - Ängelholm, Sweden DA - 2008-05-14 PY - 2008 AN - OPUS4-17595 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Helmerich, Rosemarie A1 - Niederleithinger, Ernst A1 - Wiggenhauser, Herbert A1 - Krause, Martin A1 - Streicher, Doreen T1 - NDT Methods for condition assessment of railway bridges T2 - IABSE 2006 Conference on operations, maintenance and rehabilitation of large infrastructure projects, bridges and tunnels CY - Copenhagen, Denmark DA - 2006-05-15 PY - 2006 AN - OPUS4-14346 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -