TY - CONF A1 - Heckel, Thomas T1 - Non-destructive testing and fracture mechanics T2 - QNDE CY - Minneapolis DA - 2015-07-25 PY - 2015 AN - OPUS4-34016 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Influencing factors on the inspection performance of wheel axle sets under training conditions T2 - QNDE CY - Minneapolis (USA) DA - 2015-07-25 PY - 2015 AN - OPUS4-34018 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Thema Validated Inspection Techniques for Composites in Energy Applications - Inspection technique Ultrasound T2 - VITCEA Workshop CY - Berlin DA - 2015-02-17 PY - 2015 AN - OPUS4-34019 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Simulation of Wave Propagation and Soundfield Pattern of Ultrasonic NDT Methods T2 - Innotesting CY - Wildau DA - 2015-02-20 PY - 2015 AN - OPUS4-34020 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Ermittlung der Fehlerauffindwahrscheinlichkeit (POD) in Abhängigkeit von der Prüfrastergröße bei der Ultraschallprüfung großer Schmiedestücke mittels Simulation und Experiment T2 - DACH CY - Salzburg DA - 2015-05-11 PY - 2015 AN - OPUS4-34021 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Influencing factors on the inspection performance of wheel axle sets under training conditions T2 - DACH CY - Salzburg DA - 2015-05-11 PY - 2015 AN - OPUS4-34022 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Casperson, Ralf A1 - Heckel, Thomas T1 - New evaluation methods for non-destructive rail inspection using eddy current and ultrasound N2 - Since 1999 there has been a continuous development of non-destructive head check inspection. Especially in case of modern rail inspection systems, high demands on a fast, detailed detection and classification of defects called for improved testing methods. Due to the large amount of different rail types and profiles, the adaptation and optimization of algorithms is still in progress. Additional data analysis is under devel-opment for combined eddy current and ultrasonic inspection methods. This presentation gives an over-view of further enhancement and linking of testing systems as well as data processing. Main foci of the development are an improved sensitivity and an increased reliability of the testing results. Also, addi-tional information can be obtained like determination of local hardness and roughness of the rail as well as an enhanced resolution for locating of defects which will be part of the presented work. T2 - Railway Engineering-2017 CY - Edinburgh, UK DA - 21.06.2017 KW - Eddy current testing KW - Ultrasonic testing KW - Rail inspection KW - Data evaluation KW - Classification PY - 2017 SN - 0-947644-83-0 DO - https://doi.org/10.25084/raileng.2017.0078 SP - 1 EP - 10 AN - OPUS4-40767 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - New standard propopsal for determination of steel cleanliness using high frequency ultrasonic testing N2 - Due to the market needs on steel for high demanding applications non-destructive methods for the determination of steel cleanliness using ultrasound have to be adapted to increase sensitivity respectively. The basic idea is that the new standard proposal should follow the basic line outs from SEP 1927 and ASTM E588. Additional to these relatives the standard should be open to different types of specimen and inspection frequencies to cover a wide range from bars, rings and plates as well as different inspection sensitivities. For an enhance in resolution the standard draft focuses on immersion focal beam probes which should be selected according to the geometry of the specimen. The selection should be proved with the aid of simulation tools. The frequency shall be at least 10 MHz. For specimen thicknesses of less than 6 mm a frequency of at least 25 MHz shall be used. Calibration procedures had to be improved significantly compared to the old standards to allow proper sizing of indications. Therefore calibration procedures shall take signal processing into account. For detailed evaluation of the amplitude dependency and for calibration a reference block with a sufficient number of reflectors has to be used. The recorded echo height shall be directly transferred into an equivalent disc shaped reflector EDSR by a distance amplitude curve. The novelty in this standard draft will be that based on 3D measurements and 3D evaluation the amplitude criterion of an indication becomes just one among some other criteria. This standard takes the signal amplitude, signal amplitude distribution and signal travel time for classification into account. The standard draft will be open to the definition of the volume to be investigated to be set by the user. This will make evaluation more comparable to other methods because the inspected area has to be user defined. We recommend CEN/TC 138 to decide on a work item for this proposal to become an EU and an ISO standard using Vienna agreement. The research leading to these results has received funding from the European Union's Research Fund for Coal and Steel (RFCS) research programme under grant agreement n° RFSR-CT-2013-00014. T2 - QNDE 2017 CY - Provo, UT, USA DA - 17.07.2017 KW - Standardisation KW - Ultrasound KW - Steel cleanliness PY - 2017 AN - OPUS4-41148 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Boehm, Rainer A1 - Heckel, Thomas T1 - Simulation of sparse matrix array designs N2 - Matrix phased array probes become more and more prominent to be used in industrial applications. The main drawbacks, using probes incorporating a very large number of transducer elements, are the needs for an appropriate cabling and an ultrasonic device offering many parallel channels. Matrix arrays designed for extended functionality feature at least 64 or more elements. Typical arrangements are square matrices, e.g. 10 by 10 or 11 by 11 or rectangular matrices, e.g. 8 by 16 or 10 by 12 to fit a 128-channel phased array system. In some phased array systems, the number of simultaneous active elements is limited to a certain number, e.g. 32 or 64. Those setups do not allow to run the probe with all elements active which may cause a significant change in the directivity pattern of the resulting sound beam. When only a subset of elements is possible to use during a single acquisition, different strategies may be applied to collect enough data for rebuilding the missing information from the echo signal. Omission of certain elements may be one approach, overlay of subsequent shots with different active areas may be another one. This paper presents the influence of decreased number of active elements on the sound field and their distribution on the array. An example for 16 active elements out of 121 is given in Figure 1. The sound field divergence and its shape basically remain the same, while the sensitivity is reduced and the amplitudes of the speckle-like side lobes increase significantly. Solutions using subsets with different element activity patterns on matrix arrays and their advantages and disadvantages concerning the sound field are evaluated using semi-analytic simulation tools. Sound field criteria regarding the consequences for NDT test results and the system setup are discussed. T2 - QNDE 2017 CY - Provo, UT, USA DA - 17.07.2017 KW - Ultrasound KW - Sparse array KW - Simulation PY - 2017 AN - OPUS4-41149 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Signal processing for non-destructive testing of railway tracks N2 - Increased speed, heavier loads, altered material and modern drive system concepts result in an increasing number of flaws in railways. Caused by the rapid change in damage mechanism by modern rolling stock the appearance of the flaws also alters. Hence, interpretation of non-destructive rail testing results may become difficult. Caused by the changed interplay between detection method and flaw the recorded signals will result in an unknown type for the rail flaws type classification. Methods for automatic rail inspection according to defect detection and classification have been developed continuously. Signal processing is a key technology to master the challenge of classification and maintain resolution and detection quality independently of operation speed. The basic ideas of signal processing based on the Glassy-Rail-Diagram for classification purposes will be presented. Examples for the detection of damages caused by rolling contact fatigue are given. Synergetic effects of combined evaluation of diverse inspection methods are shown. T2 - QNDE 2017 CY - Provo, UT, USA DA - 17.07.2017 KW - Rail testing KW - Signal processing KW - Ultrasound PY - 2017 AN - OPUS4-41150 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Non-Destructive ultrasonic investigations on FRP structures N2 - Components made of fibre-reinforced plastic are a prominently used material in modern safety-relevant structures. Periodic in-service non-destructive inspection of these structures is necesary. The EMRP-funded project VITCEA aims on the evaluation of the performance of various non-destructive testing methods on the inspection of fibre-reinforced plastics. The physical layout of fibre layers leads to complex structures of fibre-reinforced plastic parts. Furthermore different material properties of the fibre and the resin cause anisotropic behaviour of the material.This poses a challenge for ultrasonic NDT by causing a complex acoustical response. The acoustical behaviour of fibre-reinforced plate materials has been simulated. Specimens with artificial flaws for the evaluation of the detection thresholds have been designed and manufactured. Mechanized ultrasonic testing methods using phased-array sensors, air-coupled transducers, immersion tank testing and contact technique have been evaluated on the specimen. In this talk results of different ultrasonic testing methods will be compared and discussed. T2 - VITCEA Steakholder Workshop CY - NPL, London, UK DA - 7.6.2017 KW - FRP KW - Fiber reinforced platic KW - Ultrasound KW - Matrix array KW - ACUT KW - Air coupled KW - Non-destructive testing PY - 2017 AN - OPUS4-41153 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Boehm, Rainer A1 - Heckel, Thomas T1 - Schnelle Ultraschallprüfung von längsgebohrten Eisenbahnradsatzwellen mit Phased Array Rotationsscanner N2 - Im Rahmen des Europäischen Projektes RAAI* wird speziell für längsgebohrte Eisenbahnradsatzwellen von Hochgeschwindigkeitszügen eine Phased Array Technik angepasst, mit dem Ziel einer nahezu 100%igen Rissprüfung (Tiefe 2-3 mm) ohne die Demontage der Wellen und einer Prüfzeitreduzierung von 75%. Die Technik arbeitet mit einem Phased Array, bei dem die Schwingerelemente auf einem Kegelstumpf angeordnet sind. Für die Abtastung in Umfangsrichtung erlaubt das Phased Array die schnelle Rotation und zusätzlich das Fokussieren und Schwenken des Schallbündels. In Richtung der Achse wird das Prüfkopfsystem mechanisch bewegt. In vorangegangenen Projekten ist das Prinzip dieser Prüftechnik entwickelt und die Tauglichkeit gezeigt worden. Die jetzigen Arbeiten haben insbesondere die Optimierung der Sensortechnik an die o.g. Aufgabe zum Ziel. Wegen der ungewöhnlichen Geometrie des Arrays sind umfangreiche Simulationsrechnungen nötig, um die Auswirkung von zahlreichen Parametern auf die Schallfeldform und letztlich auf die Empfindlichkeit und die Ortsauflösung zu untersuchen und die Konstruktionsdaten zu bestimmen. Zur Validierung der Prüftechnik werden Tests an typischen Eisenbahnradsatz-wellen durchgeführt. Der Einsatz von unterstützenden Signalverarbeitungsalgorith-men bei der Auswertung der Prüfergebnisse zur sichereren Fehlererkennung ist u.a. wegen des möglichen geringen Messpunktabstandes für diese Prüftechnik besonders vielversprechend. Der Stand der Entwicklung wird gezeigt. T2 - DGZfP Jahrestagung 2017 CY - Koblenz, Germany DA - 22.05.2017 KW - Phased array KW - Radsatzwellen KW - Ultraschall KW - Kegelarray KW - Eisenbahnradsatz KW - Innenprüfung KW - ZfP KW - Bahn KW - Kegel KW - Innenbohrung KW - Prüfung PY - 2017 AN - OPUS4-41154 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Digitale Signalverarbeitung von Ultraschallmessdaten T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Germany DA - 2010-05-10 PY - 2010 AN - OPUS4-21755 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Outcome of the Cologne Accident Investigation T2 - WOLAXIM-Project Kickoff-Meeting CY - Cambridge, England DA - 2010-11-22 PY - 2010 AN - OPUS4-22816 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - The Glassy Rail - Advanced Ultrasonic Rail Inspection T2 - IEEE International Ultrasonics Symposium CY - Rome, Italy DA - 2009-09-20 PY - 2009 AN - OPUS4-19951 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Brekow, Gerhard A1 - Heckel, Thomas A1 - Thomas, Hans-Martin T1 - Zerstörungsfreie Prüfung von Eisenbahnschienen PY - 2009 SN - 0176-0157 SN - 0940-7340 VL - 24 IS - 95 SP - 112 EP - 117 PB - Heckner CY - Wolfenbüttel AN - OPUS4-20105 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - High Speed Non-Destructive Rail Testing with Advanced Ultrasound and Eddy-Current Testing Techniques T2 - 5th International Workshop Non-Destructive Testing in Progress CY - Prague, Czech Republic DA - 2009-10-12 PY - 2009 AN - OPUS4-20156 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Heckel, Thomas A1 - Thomas, Hans-Martin A1 - Kreutzbruck, Marc A1 - Rühe, S. ED - Mazal, Pavel T1 - High speed non-destructive rail testing with advanced ultrasound and eddy-current testing techniques T2 - 5th International workshop of NDT experts - NDT in progress 2009 CY - Prague, Czech Republic DA - 2009-10-12 KW - Non-destructive testing (NDT) KW - Rail inspection KW - Ultrasound KW - Eddy current KW - Signal processing PY - 2009 SN - 978-80-214-3968-9 SP - 101 EP - 109 AN - OPUS4-20340 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Thomas, Hans-Martin A1 - Kreutzbruck, Marc A1 - Rühe, S. T1 - High speed non-destructive rail testing with advanced ultrasound and eddy-current testing techniques N2 - Today the rails face increased exposure to heavy loads, higher speeds and a very dense overall traffic. A continued development of testing methods for the rail inspection trains became necessary to match the modern needs for a fast detection and detailed classification of defects. To guarantee the safe operation of rail traffic non-destructive inspection techniques with combined ultrasound and eddy current testing methods are used to detect damages on rails. One of the main actual challenges of automated rail testing is the high inspection speed which is very close to the physical limits. To overcome these limits digital signal processing algorithms have to be used which maintain resolution and detection quality independent of operation speed. This paper presents a recently developed state of the art rail inspection system which uses advanced ultrasonic and eddy current testing techniques. Testing results are shown in a newly developed so called Glassy-Rail-Diagram which is capable to present data with a fixed resolution independent of inspection speed. T2 - NDE 2009 CY - Tiruchirappalli, India DA - 2009-12-10 KW - Non-destructive testing (NDT) KW - Rail inspection KW - Ultrasound KW - Eddy current KW - Signal processing PY - 2009 SP - 261 EP - 265 AN - OPUS4-20883 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Armbruster, R. A1 - Heckel, Thomas A1 - Fenger, S. T1 - Die gläserne Schiene - Fortgeschrittene Ultraschall-Schienenprüfung KW - Ultraschall KW - Wirbelstrom KW - Zerstörungsfreie Prüfung (ZfP) KW - Schienenprüfung KW - Signalverarbeitung PY - 2010 SN - 1616-069X SN - 0948-5112 VL - 121 SP - 65 EP - 68 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung CY - Berlin AN - OPUS4-23254 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Heckel, Thomas A1 - Kreutzbruck, Marc A1 - Montag, Hans-Joachim A1 - Fenger, S. T1 - The glassy rail: advanced ultrasonic rail inspection PY - 2010 SN - 0976-254X VL - 1 IS - 5 SP - 16 EP - 19 PB - Headliners Advertising Services Pvt. Ltd. CY - Kolkata, India AN - OPUS4-23269 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Verbesserung der zerstörungsfreien Prüfung vor Ort durch den Einsatz bildgebender Verfahren T2 - Wissenschaft trifft Handwerk CY - Berlin, Germany DA - 2010-09-22 PY - 2010 AN - OPUS4-23497 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Verbesserung der zerstörungsfreien Prüfung vor Ort durch den Einsatz bildgebender Verfahren T2 - Wissenschaft trifft Handwerk CY - Leipzig, Germany DA - 2011-03-15 PY - 2011 AN - OPUS4-23498 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Neue Prüftechnik für den Schienenprüfzug, Erfahrungen, Fehlerbilder, Auswerttechniken T2 - DGZfP-Jahrestagung CY - Münster, Germany DA - 2009-05-18 PY - 2009 AN - OPUS4-19527 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - New Developments for Non-Destructive Rail Testing T2 - Railway Engineering CY - London, England DA - 2009-06-24 PY - 2009 AN - OPUS4-19585 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Rühe, S. A1 - Hintze, H. A1 - Armbruster, R. T1 - Neue Prüftechnik für den Schienenprüfzug - Erfahrungen, Fehlerbilder, Auswertetechniken T2 - DGZfP-Jahrestagung 2009 CY - Münster, Deutschland DA - 2009-05-18 KW - Schienenprüfzug PY - 2009 SN - 978-3-940283-16-0 IS - DGZfP-BB 115 ( Di.2.B.4) SP - 1 EP - 7 AN - OPUS4-20511 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Laible, Patrick A1 - Heckel, Thomas T1 - Quantitative Risstiefenbestimmung an Eisenbahnschienen mit Ultraschall N2 - Die Detektion von Rissen in Eisenbahnschienen erfolgt mit Hilfe von Ultraschall- und Wirbelstromprüftechniken. Zur Verbesserung der Aussage der Tiefenbestimmung von zur Fahrfläche hin geöffneten tiefen Rissen wurde von der BAM ein entsprechender Lösungsansatz erarbeitet und im Labormaßstab erprobt. Eine spezielle Sender-Empfänger-Anordnung ermöglicht in Verbindung mit einer auf der TOFD-Technik basierenden Datenerfassung mit anschließender Laufzeitanalyse des Signals die Bestimmung von Risstiefen bis 30 mm. T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 2010-05-10 PY - 2010 SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (P66) SP - 1 EP - 6 CY - Berlin AN - OPUS4-21885 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Teilmechanisiertes Handprüfsystem für Radsatzwellen mit Längsbohrung auf Basis der Gruppenstrahlertechnik T2 - DGZfP-Jahrestagung CY - Rostock, Germany DA - 2005-05-02 PY - 2005 AN - OPUS4-7318 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - UT1-M2-Ausbildung für die mechaniesierte Ultraschallprüfung T2 - DGZfP-Jahrestagung CY - Rostock, Germany DA - 2005-05-02 PY - 2005 AN - OPUS4-7319 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Erhard, Anton A1 - Heckel, Thomas A1 - Schenk, Gottfried A1 - Hintze, H. T1 - Laufende Instandhaltung von Schienenfahrzeugen - Einsatz der Gruppenstrahlertechnik zur Radsatzprüfung N2 - Zur Gewährleistung des sicheren Betriebs von Schienenfahrzeugen werden bei der laufenden Instandhaltung die Radsätze (Laufräder und Radsatzwellen) mittels Ultraschall auf Fehlerfreiheit geprüft. Auf Grund der Komplexität der durchzuführenden Prüfungen an der Radscheibe von scheibengebremsten Fahrzeugen ist beim Einsatz konventioneller Techniken eine große Anzahl Ultraschallprüfköpfe erforderlich, deren Reduzierung eine technische Herausforderung darstellt. Auch bei der Prüfung von Radsatzvollwellen sind auf Grund der eingeschränkten Zugänglichkeit unterschiedliche Winkelprüfköpfe erforderlich. Ein Ziel der Untersuchungen bestand darin, die Anzahl der erforderlichen konventionellen Prüfköpfe deutlich zu reduzieren. Dazu kann die Gruppenstrahlertechnik einen Beitrag leisten. KW - Ultraschall- und Wirbelstromprüfung KW - Radsätze von Personenverkehrszügen und Schienen PY - 2004 DO - https://doi.org/10.3139/120.100560 SN - 0025-5300 VL - 46 IS - 1-2 SP - 40 EP - 45 PB - Carl Hanser Verlag CY - München AN - OPUS4-2654 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krull, R. A1 - Hintze, H. A1 - Thomas, Hans-Martin A1 - Heckel, Thomas T1 - Zerstörungsfreie Prüfung an Schienen heute und in der Zukunft PY - 2003 SN - 1618-8330 VL - 127 IS - 06-07 SP - 286 EP - 296 PB - Siemens CY - Berlin AN - OPUS4-2644 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krull, R. A1 - Hintze, H. A1 - Thomas, Hans-Martin A1 - Heckel, Thomas T1 - ZfP an Schienen heute und in der Zukunft T2 - DVM-Tag 2003 CY - Berlin, Deutschland DA - 2003-05-07 KW - Schienenprüfung KW - Wirbelstromprüfung KW - Ultraschall KW - Head Checks KW - Gruppenstrahlertechnik PY - 2003 N1 - Serientitel: DVM-Bericht – Series title: DVM-Bericht IS - 670 SP - 141 EP - 151 PB - DVM CY - Berlin AN - OPUS4-2522 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Tscharntke, Dirk A1 - Heckel, Thomas A1 - Boehm, Rainer A1 - Erhard, Anton A1 - Krull, R. A1 - Lützner, J. A1 - Hintze, H. ED - Forde, M. C. T1 - Development of ultrasonic railway inspection systems using phased array methods T2 - 6th Railway Engineering Conference CY - London, England, UK DA - 2003-04-30 KW - NDT KW - Ultrasonic KW - Phased array KW - Railway KW - Inspection KW - Directivity pattern KW - Crack analysis/sizing PY - 2003 SN - 0-947644-51-2 PB - Engineering Technics Press CY - Edinburgh AN - OPUS4-2487 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Entwicklungstendenzen bei der Gruppenstrahlertechnik T2 - 4. Fachtagung ZfP im Eisenbahnwesen CY - Wittenberge, Germany DA - 2006-03-21 PY - 2006 AN - OPUS4-12247 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Ultrasonic testing with matrix arrays, applications in non-destructiv testing T2 - 9th European Conference on Non-Destructive Testing (ECNDT) CY - Berlin, Germany DA - 2006-09-25 PY - 2006 AN - OPUS4-12633 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Brekow, Gerhard A1 - Mrasek, Heinz T1 - Ultrasonic Testing With Matrix Arrays, Applications in Non-Destructive Testing T2 - 9th European Conference on NDT CY - Berlin, Germany DA - 2006-09-25 KW - Operational principles KW - Ultrasound hardware KW - Probe description KW - Examples for application PY - 2006 SN - 3-931381-86-2 SP - 1(?) EP - 7(?) PB - European Federation for Non-Destructive Testing CY - Berlin AN - OPUS4-14060 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tessaro, Ute A1 - Heckel, Thomas A1 - Boehm, Rainer A1 - Guichard, Marcel A1 - Mrasek, Heinz A1 - Brekow, Gerhard T1 - Ultrasonic Testing of Railway Axles from a Borehole in Axial Direction T2 - 9th European Conference on NDT CY - Berlin, Germany DA - 2006-09-25 KW - Phased array technique KW - Surface breaking cracks KW - Railway axles with a bore hole in axial direction KW - Modelling calculations PY - 2006 SN - 3-931381-86-2 SP - 1(?) EP - 7(?) PB - European Federation for Non-Destructive Testing CY - Berlin AN - OPUS4-14062 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Thomas, Hans-Martin A1 - Heckel, Thomas A1 - Hanspach, G. T1 - Advantage of a combined ultrasonic and eddy current examination for railway inspection trains N2 - Some years ago, two railway inspection trains (RIT) already equipped with ultrasound, had additional advanced eddy current techniques installed. Recently, a new RIT was equipped with a system that was designed, from the beginning, to employ a combination of these two techniques for non-destructive rail inspection. The eddy current technique has been developed to enable identification and evaluation of rolling contact fatigue (RCF) defects. The ultrasound technique is aimed at measurements in the rail bulk volume, which are not feasible using the eddy current technique. Experience gained from application has shown that clear improvement on rail inspection can be achieved. For example, following Deutsche Bahn DB (German Rail) AG guideline, defects which are classified as group 2 using ultrasound testing can be further labelled as 'distinguished positions' if, for example, head checking can be identified in the same position using the eddy current technique. In other words, the new technique is capable of identifying two fundamentally different types of defects occurring at the same location. Such defects can then be classified as Group 1, equivalent according to the DB AG guideline. Furthermore, problem cases in the past, such as the decision whether a weld or rail joint is present for a fishing table, can be reliably determined using additional information from the eddy current technique. In this paper, examples will be provided to demonstrate application. KW - Eddy Current KW - Ultrasonic KW - Rail Inspection KW - Detection of Rail Defects PY - 2007 DO - https://doi.org/10.1784/insi.2007.49.6.341 SN - 0007-1137 VL - 49 IS - 6 SP - 341 EP - 344 PB - British Institute of Non-Destructive Testing CY - Northampton AN - OPUS4-16127 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Klinger, Christian A1 - Bettge, Dirk A1 - Häcker, Ralf A1 - Heckel, Thomas A1 - Gohlke, Dirk ED - Pohl, M. T1 - Schadensanalyse zum Radsatzwellenbruch ICE3 T2 - DGM-Tagung Werkstoffprüfung 2010 CY - Neu-Ulm, Deutschland DA - 2010-12-02 KW - Radsatzwellenbruch KW - Nichtmetallische Einschüsse KW - Reinheitsgrad KW - Ultraschall-Hohlwellenprüfung PY - 2010 SP - 235 EP - 239 AN - OPUS4-23855 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Klinger, Christian A1 - Bettge, Dirk A1 - Häcker, Ralf A1 - Heckel, Thomas A1 - Gohlke, Dirk A1 - Klingbeil, Dietmar T1 - Schadensanalyse zum Radsatzwellenbruch ICE3 N2 - Am 9. Juli 2008 entgleiste ein Hochgeschwindigkeits-Triebzug der Baureihe 403, ICE3, bei der Ausfahrt aus dem Kölner Hauptbahnhof. Ursache dafür war der Schwingbruch einer Radsatzwelle. Im Auftrag der Staatsanwaltschaft Köln untersuchte die BAM die Schadensteile, insbesondere die gebrochene Treibradsatz-Hohlwelle. Zunächst wurden das Drehgestell, der Antriebsstrang, die Räder, die Bremsen und die gebrochene Radsatzwelle visuell untersucht und deren Zustand dokumentiert. Anschließend erfolgte die zerstörungsfreie Prüfung der beiden Bruchstücke der Hohlwelle mit teilmechanisierter Ultraschall-Handprüfung. Vor der Zerlegung der Radsatzwelle wurden ausgewählte Maße kontrolliert und die Oberfläche eingehend untersucht. Nach der Probenahme und Präparation wurden die relevanten spezifizierten Eigenschaften des Wellenwerkstoffs überprüft. Mittels Bruchflächenanalyse konnte die Startstelle des Schwingrisses lokalisiert, aufgrund der starken Sekundärschäden auf der Bruchfläche und an den Bruchkanten jedoch nicht direkt ausgewertet werden. Durch die Kombination von Mikro-Computertomographie und Ultraschall-Tauchtechnik wurden u. a. nahe der Schwingriss-Startstelle Inhomogenitäten erkannt, die durch metallographische Zielpräparation als nichtmetallische Einschlüsse identifiziert wurden. Die Größe dieser Einschlüsse ist gemäß gefordertem Reinheitsgrad unzulässig. Vergleichbare Einschlüsse in diesem hochbeanspruchten Bereich der Radsatzwelle haben vermutlich den Schwingriss initiiert. T2 - 43. Tagung des DVM-Arbeitskreises Bruchvorgänge - Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen CY - Rostock, Germany DA - 22.02.2011 KW - Radsatzwellenbruch KW - Nichtmetallische Einschlüsse KW - Reinheitsgrad KW - Ultraschall-Hohlwellenprüfung KW - Railway axle KW - Fatigue crack KW - Root cause KW - Cologne accident PY - 2011 SP - 1 EP - 6 AN - OPUS4-25275 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Prüfung von Eisenbahnschienen mit dem Schienenprüfzug bei hohen Geschwindigkeiten bis 20 m/s T2 - Bahntechnik-Symposium 2011 CY - Berlin, Germany DA - 2011-12-09 PY - 2011 AN - OPUS4-25255 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Völz, Uwe A1 - Kreutzbruck, Marc A1 - Heckel, Thomas A1 - Mrasek, Heinz T1 - Verification of ultrasonic field modeling by visualization of wave propagation in solids N2 - When dealing in ultrasonic testing with inhomogeneous and anisotropic material structure such as diverse types of components made from austenitic or nickel based cast, which are currently used for modern power plant concepts, data interpretation is quite difficult. For better understanding of the complex interaction between the sound field and the component under test, the mathematical modeling of sound propagation in solids is a substantial task to increase the probability of detection of relevant defects. First we present a mathematical approach for modeling the three dimensional transient particle displacement as a function of time in each point in a half space excited by an impulsive point load at the surface. The transient ultrasonic field of a rectangular array element is calculated with this approach by a point source synthesis. Based on this solution we model the wave propagation of a phased array transducer by time delayed superposition of the wave field of the transducer elements. Next we use an electrodynamic technique to visualize the grazing sound field at the surface of a test block radiated by a phased array probe. By detecting the grazing beam at the sample’s surface with a small electrodynamic probe, we measured the particle displacement as a function of time. It allows for measuring the displacement in all three spatial directions. This comprises the detection of the horizontal and vertical particle displacement with respect to the surface and thus also the detection of longitudinal and shear waves is possible. The calculated and measured wave fields will be compared for different delay laws in isotropic and transversely isotropic media. The results support the theoretical activities to model the wave propagation and to find optimal testing parameters for different components and configurations. T2 - 8th International conference on NDE in relation to structural integrity for nuclear and pressurised components CY - Berlin, Germany DA - 2010-09-29 KW - Sound field KW - Wave propagation KW - Visualization KW - Modeling KW - Phased array PY - 2010 SN - 978-3-940283-30-6 IS - DGZfP-BB 125 (Th.4.A.2) SP - 1 EP - 7 CY - Berlin AN - OPUS4-25229 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Optimierung von Ultraschall-Fokusprüfköpfen beim Einsatz an stark gekrümmten Oberflächen T2 - DGZfP-Jahrestagung 2011 CY - Bremen, Germany DA - 2011-05-30 PY - 2011 AN - OPUS4-25337 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gohlke, Dirk A1 - Kotschate, Daniel A1 - Heckel, Thomas T1 - Visualisierung der Volumenmessdaten von hochauflösenden Ultraschalltauchtechnikprüfungen N2 - Die heutigen Anforderungen an Bauteile und deren Materialien werden immer höher. Somit steigen auch die Anforderungen an die notwendigen Prüfverfahren zur Qualitätsbestimmung bzw. –erhaltung. Durch den optimierten Einsatz von mechanisierten Prüfverfahren und der Verwendung von Visualisierungsalgorithmen wird es möglich, Prüfergebnisse mehrdimensional und farbcodiert z.B. als Überblicksansicht über das Volumen des geprüften Bauteils zu bekommen. Bei der hochauflösenden Volumenprüfung eines Bauteils mittels Ultraschall-Tauchtechnikverfahren, bei dem anstelle einer einfachen Ja/Nein – Aussage eine detaillierte Analyse erforderlich ist, ist es notwendig, alle Messdaten, d.h. jedes A-Bild an jedem Ort, zu speichern. Bei der Auswertung der Daten werden vorwiegend 2D-Darstellungen, wie z.B. das C-Bild der gescannten Fläche, B-Bilder der Scan- und Index-Ebene sowie das A-Bild an der jeweiligen Position verwendet. Um sich z.B. ein Überblick über das Volumen zu verschaffen, werden die B-Bilder der jeweiligen Ebene gescrollt. Bei diesem Verfahren erhält man zwar eine genaue Aussage in den einzelnen Ebenen, aber doch wenig Informationen über die Lage der Anzeigen im Prüfvolumen. Eine 3D-Visualisierung der Volumenmessdaten liefert unter Berücksichtigung der Bauteilgeometrie und einer Farbcodierung der Amplitudenwerte eine übersichtliche Darstellung über Lage, Größe und Verteilung der Anzeigen im Volumen des Bauteils. T2 - DGZfP-Jahrestagung 2011 CY - Bremen, Germany DA - 30.05.2011 KW - Volumenprüfung KW - Tauchtechnik PY - 2011 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-253859 SN - 978-3-940283-33-7 IS - DGZfP-BB 127 (Poster 61) SP - 1 EP - 6 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP) AN - OPUS4-25385 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Boehm, Rainer A1 - Gohlke, Dirk A1 - Völz, Uwe T1 - Analyseprüfung von Eisenbahnradsatzwellen mit Ultraschall N2 - Die wiederkehrende zerstörungsfreie Prüfung von längs gebohrten Eisenbahnradsatzwellen mit Ultraschall erfolgt im eingebauten Zustand aus der Wellenbohrung heraus. Neben den aufzufindenden Fehleranzeigen erzeugt aufgrund der geometrischen Bedingungen der Radsatzwelle hierbei jeder Querschnittsübergang eine umlaufende Formanzeige in der Ergebnisdarstellung. Durch den Prozess des Aufschrumpfens der Radscheiben auf die Sitze können weiterhin örtlich statistisch verteilte Bereiche im Sitz entstehen, die bei der Ultraschallprüfung Anzeigen hervorrufen, die so genannten Scheinanzeigen. Insbesondere in den Bereichen der Querschnittsübergänge ist zum einen die Prüfsituation sehr komplex, zum anderen ist hier die Wahrscheinlichkeit für eine Rissbildung am höchsten. Bei der Befundanalyse stößt die derzeit verwendete Prüftechnik in diesen Bereichen an ihre Grenzen, so dass nicht immer eine eindeutige Prüfaussage erfolgen kann. Im Bericht werden Lösungsansätze für Analyseverfahren vorgestellt, die auf Basis der Gruppenstrahlertechnik bzw. mit Fokusprüfköpfen in Verbindung mit dem Einsatz von Signalverarbeitung vielversprechende Ergebnisse zur Optimierung dieser Situation aufzeigen. T2 - DGZfP-Jahrestagung 2011 CY - Bremen, Germany DA - 30.05.2011 KW - Eisenbahnradsatzwellen KW - Radsatzwellen PY - 2011 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-253863 SN - 978-3-940283-33-7 IS - DGZfP-BB 127 (Di.2.A.3) SP - 1 EP - 9 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP) AN - OPUS4-25386 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Analyseprüfung von Eisenbahnradsatzwellen mit Ultraschall T2 - DGZFP-Jahrestagung 2011 CY - Bremen, Germany DA - 2011-05-30 PY - 2011 AN - OPUS4-25335 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Die Gläserne Schiene T2 - DGZfP-Arbeitskreis München CY - Munich, Germany DA - 2011-09-29 PY - 2011 AN - OPUS4-25297 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Zerbst, Uwe A1 - Beretta, S. A1 - Köhler, G. A1 - Lawton, A. A1 - Vormwald, M. A1 - Beier, H.T. A1 - Klinger, Christian A1 - Cerný, I. A1 - Rudlin, J. A1 - Heckel, Thomas A1 - Klingbeil, Dietmar T1 - Safe life and damage tolerance aspects of railway axles - A review N2 - The paper gives an overview on safe life and damage tolerance methods applied to railway axles. It describes failure scenarios due to fatigue crack initiation and propagation. Besides common aspects of design, specific features such as corrosion and impact damage from flying ballast are discussed which may reduce the fatigue strength of axles during service. Potential effects of non-metallic inclusions from the steel manufacturing process are addressed in the context of the very high number of loading cycles railway axles are designed for. With respect to damage tolerance general lines of fracture mechanics residual lifetime analyses are introduced. More specific discussion is provided on aspects such as the threshold value of fatigue crack propagation and reliability aspects of non-destructive inspection. KW - Railway axle KW - Safe life design KW - Damage tolerance KW - Fatigue strength KW - Fatigue crack propagation KW - Inspection intervals PY - 2013 DO - https://doi.org/10.1016/j.engfracmech.2012.09.029 SN - 0013-7944 SN - 1873-7315 VL - 98 SP - 214 EP - 271 PB - Elsevier Science CY - Kidlington AN - OPUS4-27779 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Einfluss von Save Life und Schadentoleranzkonzepten auf die ZfP von Eisenbahnradsatzwellen T2 - DGZfP-Jahrestagung CY - Dresden, Germany DA - 2013-05-06 PY - 2013 AN - OPUS4-28576 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Zerbst, Uwe T1 - Einfluss von Save Life- und Schadenstoleranzkonzepten auf die ZfP von Eisenbahnradsatzwellen N2 - Die Sicherheitsauslegung von Radsatzwellen sieht ein abgestuftes Konzept aus dauer- und betriebsfester Konstruktion und regelmäßigen zerstörungsfreien Prüfungen vor. Der Vortrag gibt einen Überblick über diese Aspekte unter Einbeziehung moderner Auslege- und Prüfverfahren. Ein besonderer Schwerpunkt liegt dabei auf potentiellen Fragen der zerstörungsfreien Prüfung nicht nur bei der Spezifizierung belastbarer Inspektionsintervalle sondern auch bei der Gewährleistung der Basissicherheit im Rahmen von Betriebsfestigkeitsbetrachtungen. Speziell angesprochen werden Fragen wie der Einfluss und Nachweis von nichtmetallischen Einschlüssen in Stahl, Korrosionsgrübchen und Steinschlagkerben aus dem Betrieb sowie die Detektionswahrscheinlichkeit von Rissen in Abhängigkeit von der Rissgröße und der Belastung auf den Rissufern unter Berücksichtigung des Funktionsumfanges von Prüfsystemen. T2 - DGZfP-Jahrestagung 2013 CY - Dresden, Germany DA - 06.05.2013 PY - 2013 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-286204 SN - 978-3-940283-49-8 IS - Mi.1.A.1 SP - 1 EP - 7 PB - Deutsche Gesellschaft für zerstörungsfreie Prüfung e.V. (DGZfP) AN - OPUS4-28620 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -