TY - CHAP A1 - Rabin, Ira A1 - Hahn, Oliver ED - Michel, C. ED - Friedrich, M. T1 - Detection of Fakes: The Merits and Limits of Non-Invasive Materials Analysis N2 - This paper addresses the sensitive issue of authenticating unprovenanced manuscripts of high monetary value to certify they are genuine. Over the last decade, the popularity of material studies of manuscripts using non-destructive testing (NDT) has increased enormously. These studies are held in especially high esteem in the case of suspicious writings due to the methodological rigour they are reputed to contribute to debate. We would like to stress that materials analysis alone cannot prove that an object is genuine. Unfortunately, audiences with a humanities background often tend to disregard the technical details and treat any published interpretation of instrumental analysis as an objective finding. Four examples are outlined here to illustrate what questionable contributions the natural sciences can make in describing manuscripts that have actually been forged. KW - Fakes KW - Non-invasive analysis KW - Limitations PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-517202 SN - 978-3-11-071422-7 DO - https://doi.org/10.1515/9783110714333 SN - 2365-9696 VL - 20 SP - 281 EP - 290 PB - Walter de Gruyter GmbH CY - Berlin/Boston AN - OPUS4-51720 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hahn, Oliver A1 - Merchel, Silke T1 - Naturwissenschaftliche Untersuchungen von Zeichenmitteln T2 - Das Geheimnis des Jan van Eyck: Niederländische Kunst des 15. Jahrhunderts in Dresden -Gemeinschaftsausstellung der Gemäldegalerie Alte Meister und des Kupferstich-Kabinetts Residenzschloss CY - Dresden, Germany DA - 2005-08-13 PY - 2005 AN - OPUS4-22220 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hahn, Oliver T1 - Sychrotronbasierte Röntgenabsorptionsspektroskopie an Kupfergrünpigmenten T2 - Jahrestagung Archäometrie und Denkmalpflege 2006 CY - Stuttgart, Germany DA - 2006-03-22 PY - 2006 AN - OPUS4-12262 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Almogi, O. A1 - Kindzorra, Emanuel A1 - Hahn, Oliver A1 - Rabin, Ira T1 - Inks, pigments, paper: in quest of unveiling the history of the production of a tibetan buddhist manuscript collection from the tibetan-nepalese borderlands N2 - The Nepal-German Manuscript Preservation Project (NGMPP) microfilmed two sets of the rNying margyud 'bum: in 1989 the set stored in the National Archives in Kathmandu (NAK) and in 1992 another set during an expedition to Nubri, Samagaon. Both microfilming were carried out under the local director of the Nepal Research Centre (NRC) in Kathmandu, and who has also discussed the two (and other) rNying ma rgyud 'bum sets on several occasions.2 The NAK and Nubri rNying ma rgyud 'bum sets were extensively studied and catalogued (Almogi) within the framework of the Tibetology sub-project "The Manuscript Collections of supervision of Franz-Karl Ehrhard, who was at the time the the Ancient Tantras (rNying ma rgyud 'bum): An Examination of Variance," conducted at the Researcher Group "Manuscript Cultures in Asia and Africa," University of Hamburg (2008-2011). KW - Writing materials KW - Paper KW - XRF KW - Non-destructive testing PY - 2015 DO - https://doi.org/10.2143/JIABS.37.0.3132062 SN - 0193-600X VL - 36/37 SP - 93 EP - 118 PB - Dep. CY - Lausanne AN - OPUS4-34615 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weber, Gert A1 - Bschorr, T. A1 - Cramer, H. A1 - Hahn, Oliver A1 - Rethmeier, Michael A1 - Thommes, H. ED - da Silva, L.F.M. ED - Altenbach, H. T1 - Hybrid bonding of advanced high strength steels in the lightweight body shell design for the automobile manufacturing N2 - In the lightweight body shell mass production of automobiles, the application of hybrid bonding techniques becomes more and more important. Especially the combination of adhesive bonding and resistance spot welding called weldbonding is of great importance. The target of this contribution is to show the influence of medium-viscosity and low-viscosity structural adhesives on the process reliability of the weldbonding process and the mechanical properties of the hybrid bonded joints. The given results are based on the application of an epoxy PUR-based, an epoxy resin-based and a rubber-based adhesive system for joining a mild and some different advanced high strength steels (AHSS). It will be shown that both the process reliability of the weldbonding process and the mechanical behaviour of the weldbonded joints are influenced by the combinations of the base metals, the applied adhesive systems and the choice of the joining parameters. The behaviour of the weldbonded joints will be studied under quasi-static and impact loads. The discussion of the metallurgical structure of the weldbonded joints depending on the joining parameters will be given, too. Furthermore, the fatigue behaviour of the weldbonded joints will be studied. KW - Advanced high strength steels KW - Hybrid bonding KW - Lightweight body shell design KW - Weldbonding process reliability KW - Weldbonded joint behaviour PY - 2010 SN - 978-3-642-12666-6 DO - https://doi.org/10.1007/978-3-642-12667-3_22 N1 - Serientitel: Advanced Structured Materials – Series title: Advanced Structured Materials VL - 3 SP - 343 EP - 372 PB - Springer AN - OPUS4-23150 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Kemmlein, Sabine A1 - Hahn, Oliver A1 - Jann, Oliver T1 - Emissionen von Flammschutzmitteln aus Bauprodukten und Konsumgütern (Forschungsbericht 299 65 321 / UBA-FB 00,475) N2 - An verschiedenen Dämmstoffen, Montageschäumen, Computersystemen und Polstermöbeln sowie einer Matratze wurden mittels unterschiedlicher Emissionsprüfkammern und -zellen in Kombination mit geeigneten Probenahme- und Analyseverfahren Untersuchungen zur Emission polybromierter und phosphororganischer Flammschutzmittel (FSM) durchgeführt. Hierbei kamen Emissionsprüfkammern mit Volumina von 0,02 m3 und 1 m3 sowie 0.001 m3 - Emissionsprüfzellen zum Einsatz. Die hier untersuchten Substanzen zählen zu den SVOC und erfordern eine Luftprobenahme durch Adsorption an Polyurethanschaum. Die Aufarbeitung des Polyurethanschaums erfolgte mit Ultraschallbad- bzw. Soxhletextraktion, die Extrakte wurden aufkonzentriert und mit GC/MS oder HPLC/DAD vermessen. Die ursprünglich angestrebte Versuchsdauer von jeweils 28 Tagen musste auf mindestens 100 Tage verlängert werden, um einen für die Messung erforderlichen Gleichgewichtszustand zu erreichen. Mit den eingesetzten Verfahren läßt sich die Emission der phosphororganischen FSM qualitativ und quantitativ gut nachweisen, hierzu gehören insbesondere TCPP und TPP. Ausnahmen bilden z.B. RDP und BDP, hier wird die Emissionsmessung mittels Luftprobenahme durch den Einfluss von Senkeneffekte dominiert. Für die bromierten FSM ist eine gute Anwendbarkeit für Verbindungen mit bis zu sechs Bromatomen gegeben. Mit zunehmendem Bromierungsgrad und zunehmender Schwerflüchtigkeit verstärkt sich auch hier der Einfluss von Senkeneffekten und erschwert die Bestimmung der Emission. So konnte HBCD zwar auf den Kammerwandflächen jedoch, abgesehen von Spuren, nicht in der Emissionsprüfkammerluft nachgewiesen werden. Die Erkenntnisse reichen für eine umfassende Darstellung des Emissionsverhaltens der FSM und darauf aufbauender Expositionsbewertungen für den Gebrauch flammgeschützter Produkte noch nicht aus. Es bestehen weiterhin Kenntnislücken, um die z.T. hohen Gehalte an FSM z.B. in Hausstäuben erklären zu können. Gleichwohl bildet die Studie eine wesentliche Grundlage für weiterführende Untersuchungen. In Abhängigkeit vom Produkttyp betragen die ermittelten flächenspezifischen (SERa) Emissionsraten z.B. für TCPP zwischen 0,012 und 140 µg m-2 h-1. Nachgewiesene PBDEs zeigten je nach Produkttyp produktspezifische Emissionsraten (SERu) zwischen 0,1 und 14,2 ng Stück-1h-1 und SERa zwischen 0,2 und 6,6 ng m-2 h-1. Eine Ausweitung z.B. auf Langzeitmessungen, die Bestimmung des Einflusses der Materialalterung sowie unterschiedlicher Flammschutzmittelgehalte auf die Emission, die hier mangels hinreichender Information und entsprechenden Produkten nicht durchgeführt werden konnte, wäre wünschenswert. KW - Emission KW - Semi Volatile Organic Compounds (SVOC) KW - Polybromierte Flammschutzmittel KW - Phosphororganische Flammschutzmittel KW - Emissionsprüfkammer KW - Emissionsprüfzelle KW - Particulate Organic Matter (POM) KW - Dämmstoffe KW - Montageschäume KW - Leiterplatte KW - Polstermöbel KW - Matratze KW - Computer KW - Monitor KW - Drucker PY - 2003 UR - http://www.umweltbundesamt.de/publikationen/emissionen-von-flammschutzmitteln-aus-bauprodukten SN - 1862-4804 SN - 0722-186X IS - 55 SP - 1 EP - 188 PB - Umweltbundesamt CY - Dessau-Roßlau AN - OPUS4-2901 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kemmlein, Sabine A1 - Hahn, Oliver A1 - Jann, Oliver T1 - Emissions of organophosphate and brominated flame retardants from selected consumer products and building materials N2 - The emissions of selected flame retardants were measured in 1- and 0.02-m3 emission test chambers and 0.001-m3 emission test cells. Four product groups were of interest: insulating materials, assembly foam, upholstery/mattresses, and electronics equipment. The experiments were performed under constant environmental conditions (23°C, 50% RH) using a fixed sample surface area and controlled air flow rates. Tris (2-chloro-isopropyl)phosphate (TCPP) was observed to be one of the most commonly emitted organophosphate flame retardants in polyurethane foam applications. Depending on the sample type, area-specific emission rates (SERa) of TCPP varied between 20 ng m-2 h-1 and 140 ?g m-2 h-1. The emissions from electronic devices were measured at 60°C to simulate operating conditions. Under these conditions, unit specific emission rates (SERu) of organophosphates were determined to be 10–85 ng unit-1 h-1. Increasing the temperature increased the emission of several flame retardants by up to a factor of 500. The results presented in this paper indicate that emissions of several brominated and organophosphate flame retardants are measurable. Polybrominated diphenylethers exhibited an SERa of between 0.2 and 6.6 ng m-2 h-1 and an SERu of between 0.6 and 14.2 ng unit-1 h-1. Because of sink effects, i.e., sorption to chamber components, the emission test chambers and cells used in this study have limited utility for substances low vapour pressures, especially the highly brominated compounds; hexabromocyclododecane had an SERa of between 0.1 and 29 ng m-2 h-1 and decabromodiphenylether was not detectable at all. T2 - 9th International Conference on Indoor Air Quality and Climate CY - Monterey, CA, USA DA - 2002-06-30 KW - SVOC KW - Organophosphates KW - Chamber study KW - Brominated flame retardants KW - Emission rates PY - 2003 DO - https://doi.org/10.1016/j.atmosenv.2003.09.025 SN - 0004-6981 SN - 1352-2310 VL - 37 IS - 39-40 SP - 5485 EP - 5493 PB - Elsevier CY - Amsterdam AN - OPUS4-3308 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hahn, Oliver A1 - Goedicke, C. A1 - Fuchs, R. A1 - Horn, I. ED - Hahn, O. T1 - Archäometrie und Denkmalpflege 2003 T2 - Zusammenfassung der Vorträge und Poster der Jahrestagung 2003 im Ethnologischen Museum, Staatliche Museen zu Berlin CY - Berlin, Deutschland DA - 2003-03-12 PY - 2003 SN - 0949-4057 CY - Berlin AN - OPUS4-2383 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hahn, Oliver A1 - Maurer-Zenck, C. T1 - Die Tinten des Zauberflöten-Autographs. Möglichkeiten und Grenzen neuer Analyseverfahren. Ein Nachtrag zur Chronologie und biographische Pointe PY - 2003 SN - 0001-6233 VL - 50 IS - 1/2 SP - 3 EP - 22 PB - Deutsche Mozart-Gesellschaft CY - Augsburg AN - OPUS4-2616 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hahn, Oliver T1 - Zerstörungsfreie Materialanalyse an Kunst- und Kulturgut – Möglichkeiten und Grenzen N2 - Naturwissenschaftliche Verfahren sind zunehmend von Bedeutung bei der Untersuchung von Kunst- und Kulturgut und der Entwicklung von Konservierungskonzepten. Neben bildgebenden Verfahren sind materialanalytische Methoden von großer Wichtigkeit. Mobilen, zerstörungsfreien Verfahren ist grundsätzlich den Vorzug zu geben. Es ist jedoch zu konstatieren, dass Probenentnahmen unumgänglich sind, wenn spezielle Fragen an die Materialanalyse gestellt werden. T2 - Ringvorlesung Materialkunde, Technologie, Denkmalpflege und Kulturwissenschaften CY - Cologne Institute of Conservation Sciences, TH Köln DA - 06.11.2017 KW - Zerstörungsfreie Prüfung KW - Archäometrie KW - Kunst- und Kulturgut PY - 2017 AN - OPUS4-43424 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rabin, Ira A1 - Hahn, Oliver ED - Hahn, Oliver ED - Breiding, Sonja ED - Doil, Thorsten T1 - Röntgenfluoreszenzanalyse als bildgebendes Verfahren - Die Visualisierung von Materialität N2 - Naturwissenschaftliche Verfahren sind inzwischen fester Bestandteil bei der materialwissenschaftlichen Untersuchung von Kunst- und Kulturgut und bei der Entwicklung von Konservierungskonzepten zum Erhalt des kulturellen Erbes. Insbesondere werden zunehmend bildgebenden Verfahren wie die Computertomographie, die Radiographie oder die Multispektralanalyse verwendet, um die für das menschliche Auge nicht sichtbare Inhalte wie Vorzeichnungen, Pentimenti oder innere Strukturen zu visualisieren. Die entstehenden „neuen Bilder“ verändern jedoch die Sichtweise auf das kulturelle Artefakt, da sie tiefere Einblicke in den Herstellungsprozess, den Aufbau oder den Erhaltungszustand geben können. Weiterhin dokumentieren sie Veränderungen, denen ein Objekt unterworfen wurde. Anhand der Untersuchung von zwei Objekten mit dem Röntgenfluoreszenzportalscanner Jet Stream soll das Verhältnis Original – Digitalisat – Rekonstruktion diskutiert werden. T2 - 8. N.i.Ke.-Workshop: Materialität - Das Objektverständnis der vielfältigen Disziplinen im Bereich von Kunst- und Kulturgut CY - Berlin, Germany DA - 26.11.2015 KW - Röntgenfluoreszenzanalyse KW - Zerstörungsfreie Prüfung KW - Archäometrie PY - 2017 SN - 2567-1251 SP - 68 EP - 73 PB - Druckerei G. Bohm CY - Berlin AN - OPUS4-43484 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Delhey, M. A1 - Kindzorra, Emanuel A1 - Hahn, Oliver A1 - Rabin, Ira T1 - Material analysis of sanskrit palm-leaf manuscripts preserved in Nepal N2 - This article presents the findings resulting from the material analysis of several Sanskrit palm-leaf manuscripts from a corpus partly preserved in Nepal, viz. in the National Archives, Kathmandu (NAK), and in the Kaiser Library (KL), which is likewise situated in Kathmandu. The analysis was undertaken in March 2013. The colleagues of the NAK allocated a room in their precincts to us, where we could set up our mobile laboratory, and gave us access to the required manuscripts from their holdings. The officials of the KL, in turn, allowed us to take some of their valuable and ancient manuscripts to the NAK. In this way, we were enabled to conduct multi-instrumental studies on writing materials of great antiquity and interest. KW - Writing materials KW - Paper KW - XRF KW - Non-destructive testing PY - 2015 SN - 0193-600X VL - 36/37 SP - 119 EP - 152 PB - Dep. CY - Lausanne AN - OPUS4-34616 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Durkin-Meisterernst, D. A1 - Friedrich, M. A1 - Helman-Wazny, A. A1 - Nöller, R. A1 - Raschmann, S.-Ch. A1 - Hahn, Oliver T1 - Scientific methods for philological scholarship: Pigment and paper analyses in the field of manuscriptology N2 - In this paper, members of three research teams, namely the Turfan Project of the Berlin BrandenburgAcademy of Sciences and Humanities, the Berlin-based research project on pigments in Central Asianpaper manuscripts, and the Hamburg-based project on the history and typology of Central Asian papermanuscripts, present some of the results of their cooperation. The investigated manuscripts belong tothe Berlin Turfan Collection. On the basis of different examples the contribution of scientific methods tophilological scholarship within a multidisciplinary approach is demonstrated. KW - Turfan manuscripts KW - Material analysis KW - Paper KW - Ink KW - Turfan Manuskripte KW - Materialanalyse KW - Papier KW - Tinte PY - 2016 DO - https://doi.org/http://dx.doi.org/10.1016/j.culher.2015.06.004 SN - 1296-2074 VL - 17 SP - 7 EP - 13 PB - Elsevier, München AN - OPUS4-35551 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hahn, Oliver T1 - Farbe auf Papier - Materialwissenschaftliche Aspekte des Buchdrucks N2 - Der Vortrag beschäftigt sich mit den materialwissenschaftlichen Aspekten des Buchdrucks. Hierbei geht es weniger um die Darstellung und Erklärung der unterschiedlichen Druckverfahren (Hochdruck, Tiefdruck, Flachdruck und Durchdruck), diese werden nur am Rande gestreift, um die Vielfalt der unterschiedlichen Drucktechniken darzulegen. Vielmehr beschäftigt sich der Vortrag mit den Materialien, d.h. Druckfarben, die sich dann tatsächlich auf dem Schriftträger analysieren lassen. Unterschiedliche Drucktechniken (und Effekte) erfordern unterschiedliche Materialzusammensetzungen - diese werden innerhalb des Vortrags diskutiert. T2 - Transformationen des Buchdrucks, Konferenz des Basisprojekts "Matter of Typography" CY - Berlin, Germany DA - 09.06.2016 KW - Buchdruck KW - Material KW - Farbmittel PY - 2016 AN - OPUS4-36565 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hahn, Oliver T1 - Zerstörungsfreie Materialanalyse N2 - Naturwissenschaftliche Verfahren gewinnen zunehmend an Bedeutung bei der Untersuchung von Kunst und Kulturgut und bei der Entwicklung von Konservierungskonzepten zum Erhalt des kulturellen Erbes. Neben bildgebenden Verfahren wie der Computertomographie oder der Radiographie sind materialanalytische Verfahren von großer Wichtigkeit. Durch die Miniaturisierung elektronischer Bauteile kommen immer mehr mobile Untersuchungstechniken auf den Markt, so dass Kulturgüter vor Ort im musealen Kontext untersucht werden können. KW - Zerstörungsfreie Prüfung KW - Materialanalyse KW - Kunst- und Kulturgut PY - 2015 SN - 978-3-8062-3253-0 SP - 186 EP - 187 PB - LVR-LandesMuseum Bonn CY - Bonn AN - OPUS4-34614 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hahn, Oliver A1 - Brüning, G. T1 - Kombination von philologischen und materialanalytischen Verfahren bei der Datierung von Schreibvorgängen - Eine Fallstudie: Ergebnisse der Röntgenfluoreszenzanalyse an "Faust"-Handschrift im Goethe- und Schiller- Archiv T2 - 22. Jahrestagung der ITUG (international tustep user group) CY - Weimar, Deutschland DA - 2015-10-07 PY - 2015 AN - OPUS4-34602 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hahn, Oliver T1 - Scientific Investigations of the Painted Architectural Elements T2 - Medieval Pre-Islamic Architecture in Qoco: Architectural, Archaeological, Art-Historical and Scientific Evaluation of a Collection of Wooden Architectural Elements in the Museum für Asiatische Kunst CY - Berlin, Deutschland DA - 2015-05-28 PY - 2015 AN - OPUS4-33723 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Steger, Simon A1 - Stege, H. A1 - Bretz, S. A1 - Hahn, Oliver T1 - Capabilities and limitations of handheld Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS) for the analysis of colourants and binders in 20th-century reverse paintings on glass N2 - A non-invasivemethod has been carried out to show the capabilities and limitations of Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS) for identifying of colourants and binders in modern reverse glass paintings. For this purpose, the reverse glass paintings “Zwei Frauen am Tisch” (1920–22), “Bäume” (1946) (both by Heinrich Campendonk), “Lofoten” (1933) (Edith Campendonk-van Leckwyck) and “Ohne Titel” (1954) (Marianne Uhlenhuth), were measured. In contrast to other techniques (e.g. panel and mural painting), the paint layers are applied in reverse succession. In multi-layered paint systems, the front paint layer may no longer be accessible. The work points out the different spectral appearance of a given substance (gypsum, basic lead white) in reverse glass paintings. However, inverted bands, band overlapping and derivative-shaped spectral features can be interpreted by comparing the spectra fromthe paintingswith spectra frompure powders and pigment/linseed oil mock-ups. Moreover, the work focuses on this method's capabilities in identifying synthetic organic pigments (SOP). Reference spectra of three common SOP (PG7, PY1, PR83) were obtained from powders and historical colour charts.We identified PR83 and PY1 in two reverse glass paintings, using the measured reference spectra. The recorded DRIFTS spectra of pure linseed oil, gum Arabic, mastic, polyvinyl acetate resin and bees wax can be used to classify the binding media of the measured paintings. KW - DRIFTS KW - Painting KW - Non-invasive KW - Pigment PY - 2018 DO - https://doi.org/10.1016/j.saa.2018.01.057 SN - 1873-3557 VL - 195 SP - 103 EP - 112 PB - Elsevier B.V. AN - OPUS4-44023 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Brüning, Gerrit A1 - Hahn, Oliver ED - Nutt-Kofoth, Rüdiger ED - Plachta, Bodo T1 - Goethes Helena-Dichtung in ursprünglicher Gestalt. Zum methodischen Verhältnis von Materialanalyse und Textkritik N2 - Seit 2009 entsteht die historisch-kritische Hybridediton von Goethes „Faust“. Im Januar 2013 ist im Rahmen dieses editorischen Unternehmens die Röntgenfluoreszenzanalyse (RFA) zum Einsatz gekommen, um auf der Grundlage der Zusammensetzung der verwendeten Eisengallustinten entstehungsgeschichtliche Erkenntnisse über das handschriftliche Material zu gewinnen. Im Mittelpunkt stand neben der zeitlichen Einordnung von Handschriften vor allem die Identifikation von unterscheidbaren Bearbeitungsschichten innerhalb der jeweiligen Handschrift. Besonderes Interesse kommt dabei denjenigen Handschriften zu, von denen sicher ist oder angenommen wird, dass Goethe sie über längere Zeit hinweg oder sogar in sehr großen Abständen bearbeitet hat. Die von der traditionellen Philologie in Anschlag gebrachten äußeren und inneren Gründe und die darauf gestützten Hypothesen haben nicht ausgedient. Hypothesen zur Datierung von Handschriften Goethes lassen sich in der Regel gut anhand bestehender materieller Zusammenhänge (wie der Zuordnung des Papiers in Kombination mit der Bestimmung der Schreiberhand) verifizieren. Dagegen ermöglicht materialwissenschaftliche Charakterisierung der Eisengallustinten alleine zunächst noch keine vergleichbar genauen Datierungen. Eine Kombination der beiden Zugänge und Verfahren kann jedoch dort Erkenntnisse zutage fördern, wo die traditionellen philologischen Mittel ausgeschöpft sind. Dies wird exemplarisch innerhalb der Publikation gezeigt werden. KW - Materialanalyse KW - Eisengallustinten KW - Germanistik PY - 2017 DO - https://doi.org/10.1515/editio-2017-0009 SN - 0931-3079 SN - 1865-9446 VL - 31 SP - 145 EP - 172 PB - Walter de Gruyter GmbH CY - Berlin AN - OPUS4-43849 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hahn, Oliver T1 - Inks and Pigments N2 - The writing materials used in various cultures and epochs can be divided into two groups. The first comprises materials that write themselves, producing script by rubbing their own material off onto the writing surface. It includes charcoal, graphite, chalk, raddle, and metal styluses. Depending on the material and consistency, these are cut or pressed to make styluses and then used for writing. The second group comprises all coloring liquids that are applied to the writing surface with a quill, pen, or printing block. It includes inks made from dye solutions (for example, tannin inks) and those made from pigment dispersions (for example, sepia, soot, and bister inks). The latter are sometimes also rubbed as pastes into letters incised into the writing surface, where they increase visual contrast. Due to the variety of recipes and the natural origin of raw materials, there is a wide range of different components and impurities in writing materials. Soluble inks (Tinten) Soluble inks are based mainly on dyes forming a water solution. Colored inks were manufactured with different plant or insect dyes (e.g. Brazil wood, kermes). To stabilize the volatile material, the dyes were mixed with a mordant (e.g., alum). Brown plant inks – best-known as blackthorn or Theophilus’ inks – are usually produced from the blackthorn bark and wine. In the early European Middle Ages, inks of this kind were widely used in the production of manuscripts in monasteries. Usually, they are light brown, so sometimes small amounts of iron sulfate were added, which led to what was called an “imperfect” iron gall ink. The difference between “classic” iron gall ink and such imperfect ink is therefore not clear: the distinction is not possible, especially with the naked eye. Dispersion inks (Tuschen) According to its generic recipe, one of the oldest black writing materials is produced by mixing soot with a binder dissolved in a small amount of water. Thus, along with soot, binders such as gum arabic (ancient Egypt) or animal glue (China) are among the main components of soot inks. From Pliny’s detailed account of the manufacture of various soot-based inks, we learn that, despite its seeming simplicity, producing pure soot of high quality was not an easy task in Antiquity. Therefore, we expect to find various detectable additives that might be indicative of the time and place of production. One such carbon ink requires the addition of copper sulfate . The experimental discovery of this ink in 1990 led to a misleading expression “metal ink” that is sometimes found in the literature. Colored dispersion inks based on pigments such as orpiment, cinnabar, or azurite have been known since Antiquity. Natural or artificially produced minerals are finely ground and dispersed in a binding medium. As in soot inks, water-soluble binders such as gum arabic or egg white were used. Iron gall ink (Eisengallustinten) Iron gall inks are a borderline case between these two groups. They are produced from four basic ingredients: galls, vitriol as the main source of iron, gum arabic as a binding media, and an aqueous medium such as wine, beer, or vinegar. By mixing gallic acid with iron sulfate, a water-soluble ferrous gallate complex is formed; this product belongs to the type “soluble inks”. Due to its solubility, the ink penetrates the writing support’s surface, making it difficult to erase. Exposure to oxygen leads to the formation of insoluble black ferric gallate pigment, i.e., “dispersion ink”. Natural vitriol consists of a varying mixture of metal sulfates. Since for ink making it was obtained from different mines and by various techniques, inks contain many other metals, like copper, aluminum, zinc, and manganese, in addition to the iron sulfate. These metals do not contribute to color formation in the ink solution, but possibly change the chemical properties of the inks. T2 - Manusciences 17 CY - Frejus, France DA - 10.9.2017 KW - Medieval ink KW - Medieval pigment KW - Material analysis PY - 2017 AN - OPUS4-43556 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -