TY - JOUR A1 - Fürst, Richard A1 - Häßler, Dustin A1 - Stelzner, Ludwig A1 - Hothan, Sascha T1 - Fire resistance of existing steel structures with aged intumescent coating based on an in situ test method N2 - Intumescent coatings are commonly used in civil engineering to increase the fire resistance of steel structures. Exposed to fire, the intumescent coating reacts and forms a thermal protective char around the steel member. Thus, the heating of the steel is significantly slowed down and the fire resistance can be improved. Information regarding the scope of application and the durability of intumescent coatings are given in national approvals or European Technical Assessment documents. Due to the environmental conditions, intumescent coatings are subjected to ageing effects, which can reduce the durability and their thermal protection performance. To predict the durability for several years, during the approval procedure the behaviour of intumescent coatings is predominantly extrapolated based on accelerated artificial ageing. The established German and European assessment procedures to test and assess durability assume a working life of at least 10 years. Additional evidence may be required for longer periods. However, at present there is no method of verifying the thermal performance of existing structural members on site. For this reason, BAM is conducting the research project "INSIST" [1] to develop a minimally invasive in situ test method to determine the fire resistance of existing steel structures with applied intumescent coating. The investigation includes the development of a mobile prototype furnace. The paper describes the test setup, the developed prototype furnace, and the results of the performed test programme on uncoated and coated steel specimens. Based on this, recommendations for the test procedure are given. KW - In situ testing KW - Fire resistance KW - Intumescent coating KW - Steel KW - Thermal protection KW - Durability PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-629533 DO - https://doi.org/10.1016/j.firesaf.2025.104380 VL - 153 SP - 1 EP - 12 PB - Elsevier Ltd. AN - OPUS4-62953 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Häßler, Dustin A1 - Hothan, Sascha T1 - Performance of intumescent fire protection coatings applied to structural steel tension members with circular solid and hollow sections N2 - Intumescent fire protection coatings are used to improve the fire resistance of steel members. Due to slender cross-sections typically used for tension members, high demands are placed on the effectiveness and reliability of the intumescent coatings. This paper describes real-scale fire tests of intumescent coatings applied to steel tension members with circular solid and hollow sections. First, the current regulations for the application of intumescent coatings on steel tension members are discussed. After that, a comparison between the foaming behaviour and failure mechanisms of intumescent coatings applied to steel tension members with different cross-sections and loading conditions is given. Next, the experimental setup and procedure of the performed fire tests are presented. In addition, the influences of various parameters on the performance of the intumescent coating are analysed, including the geometry of the steel profile, dry film thickness of the intumescent coating, load utilisation level as well as the orientation of the member. Based on the theoretical considerations and results of the fire tests, it is evidenced that mechanically loaded fire tests are essential to assess accurately the contribution of intumescent fire protection coatings to the fire resistance of steel tension members with circular solid sections. KW - Fire tests KW - Intumescent coating KW - Reactive fire protection system KW - Steel KW - Tension members PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-548981 DO - https://doi.org/10.1016/j.firesaf.2022.103605 SN - 0379-7112 VL - 131 SP - 1 EP - 12 PB - Elsevier Ltd. AN - OPUS4-54898 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -