TY - JOUR A1 - Holländer, Lars A1 - Grunewald, Thomas A1 - Grätz, Rainer T1 - Influence of material properties of stainless steel on the ignition probability of flammable gas mixtures due to mechanical impacts N2 - Grazing impact experiments of various types of stainless steels were performed in explosive atmospheres of hydrogen, acetylene, ethylene or propane with air. Depending on the gas mixture, kinetic energy of the impact, and applied stainless steel, the dominant ignition sources are either separated particles or hot friction surfaces. An influence of chromium content on the ignition probability was not found, although an increase in chromium content results in a reduction of the oxidizability of separated particles. Additionally, the influence of the material properties thermal conductivity, specific heat, density and hardness on the ignition probability of the hydrogen–air mixture was investigated. With increasing thermal conductivity a decreasing rate of ignitions was observed. In contrast, an influence of the physical properties specific heat, density and hardness on the ignitability was not found. T2 - 15th International Symposium on Loss Prevention and Safety Promotion in the Process Industries CY - Freiburg, Germany DA - 05.06.2016 KW - Explosion protection KW - Mechanical generated sparks KW - Ignition protection KW - Non-electrical equipment KW - Ignition hazard assessment PY - 2016 U6 - https://doi.org/10.3303/CET1648052 SN - 2283-9216 SN - 1974-9791 VL - 48 SP - 307 EP - 312 PB - AIDIC The Italian Association of Chemical Engineering AN - OPUS4-37456 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Grunewald, Thomas A1 - Grätz, Rainer A1 - Holländer, Lars T1 - Entwicklung normativer Anforderungen an explosionsgeschützte nichtelektrische Geräte resultierend aus der Zündfähigkeit mechanisch erzeugter Schlagfunken (NAMES) N2 - Die Ergebnisse des Forschungsprojektes zeigen, dass Schlagvorgänge mit Edelstählen eine erhebliche Zündgefahr von explosionsfähigen Brenngasgemischen darstellen können. Dabei bestehen jedoch mitunter deutliche Unterschiede zwischen den verschiedenen Brenngasgemischen. Besonders hohe Zündwahrscheinlichkeiten konnten bei Brenngasgemischen mit Brenngasen der IEC-Explosionsgruppe IIC beobachtet werden, die Acetylen bzw. Wasserstoff als Brenngas enthielten. Schläge im Wasserstoff/Luft-Gemisch waren dabei jedoch bedeutend zündwirksamer. In diesem Gasgemisch konnte bei nied-rigen maximalen Schlagenergien bis 60 J sogar eine mitunter höhere relative Zündhäufigkeit beobachtet werden als bei Versuchen mit unlegiertem Baustahl. KW - Funken KW - Mechanisch erzeugte Funken KW - Schlagfunken KW - Reibfunken KW - Mechanische Funken KW - Mechanische Geräte KW - Explosionsschutz KW - ATEX KW - Nichtelektrische Geräte PY - 2015 UR - https://www.tib.eu/de/suchen/id/TIBKAT%3A877987866/Entwicklung-normativer-Anforderungen-an-explosionsgesch%C3%BCtzte/?tx_tibsearch_search%5Bsearchspace%5D=tn SP - 1 EP - 38 AN - OPUS4-38581 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -