TY - JOUR A1 - Taffe, Alexander A1 - Gehlen, C. T1 - Anwendung der Zuverlässigkeitsanalyse auf Messungen mit zerstörungsfreien Prüfverfahren am Beispiel der Tunnelinnenschalenprüfung N2 - Bemessungsregeln werden im Bauwesen derzeit auf der Grundlage der so genannten Zuverlässigkeitsanalyse entwickelt. Auf ihr ist auch das Sicherheitskonzept der EUROCODES gegründet. Seit ungefähr einem Jahrzehnt werden auch Dauerhaftigkeitsanalysen nach dieser Vorgehensweise durchgeführt. In diesem Beitrag wird gezeigt, wie Methoden der Zuverlässigkeitsanalyse nun auch auf Messaufgaben angewandt werden können. Dies wird am Beispiel der zerstörungsfreien Prüfung von Tunnelinnenschalen mit dem Ultraschallecho-Verfahren erläutert, dessen Anwendung in der Richtlinie RI-ZFP-TU des Bundesministeriums für Verkehr, Bau und Stadtentwicklung geregelt ist. Es wird gezeigt, wie Messdaten weitergehend ausgewertet werden können und welche Rückschlüsse daraus gezogen werden können. Damit kann die Eignung zerstörungsfreier Prüfverfahren im Bauwesen bezogen auf die vorhandenen Randbedingungen der Prüfaufgabe auch quantitativ angegeben werden. KW - Zuverlässigkeitsanalyse KW - Zerstörungsfreie Prüfung KW - Tunnelinnenschalen KW - RI-ZFP-TU KW - Validierung KW - Prüfgerechtes Bauen PY - 2007 U6 - https://doi.org/10.1002/best.200700585 SN - 0005-9900 SN - 1437-1006 VL - 102 IS - 12 SP - 812 EP - 824 PB - Ernst CY - Berlin AN - OPUS4-16315 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Taffe, Alexander A1 - Gehlen, C. T1 - Bedarfsgerechte Kriterien zur zuverlässigen Ortung von Minderdicken in Tunnelinnenschalen T2 - DACH-Jahrestagung 2008 - Zerstörungsfreie Materialprüfung, ZfP in Forschung, Entwicklung und Anwendung CY - St. Gallen, Schweiz DA - 2008-04-28 KW - NDT KW - Laser-induced Breakdown Spectroscopy KW - Quality assurance KW - Damage analysis KW - Concrete repair KW - Chloride KW - Sulphate PY - 2008 SN - 978-3-940283-09-2 IS - DGZfP-BB-113 (Poster 53) SP - 1 EP - 8 AN - OPUS4-17999 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gehlen, C.D. A1 - Wiens, E. A1 - Noll, R. A1 - Wilsch, Gerd A1 - Reichling, K. T1 - Chlorine detection in cement with laser-induced breakdown spectroscopy in the infrared and ultraviolet spectral range N2 - A significant parameter to monitor the status of concrete buildings like bridges or parking garages is the determination of the depth profile of the chlorine concentration below the exposed concrete surface. This information is required to define the needed volume of restoration for a construction. Conventional methods like wet chemical analysis are time- and cost-intensive so an alternative method is developed using laser-induced breakdown spectroscopy (LIBS). The idea is to deploy LIBS to analyze drill cores by scanning the sample surface with laser pulses. Chlorine spectral lines in the infrared (IR) and ultraviolet (UV)-range were studied for chlorine detection in hydrated cement samples. The excitation energies of these spectral lines are above 9.2 eV. Hence high plasma temperatures and pulse energies in the range of some hundred millijoules are needed to induce sufficient line intensity levels at the required working distance. To further increase the line intensity and to lower the detection limit (LOD) of chlorine a measuring chamber is used where different ambient pressures and gases can be chosen for the measurements. The influences on the line intensity for pressures between 5 mbar and 400 mbar using helium as process gas and the influence of different laser burst modi like single and collinear double pulses are investigated. For the first time a LOD according to DIN 32 645 of 0.1 mass% was achieved for chlorine in hydrated cement using the UV line 134.72 nm. KW - Laser-induced breakdown spectroscopy KW - LIBS KW - Hydrated cement KW - Chlorine KW - Limit of detection PY - 2009 U6 - https://doi.org/10.1016/j.sab.2009.07.021 SN - 0584-8547 SN - 0038-6987 VL - 64 IS - 10 SP - 1135 EP - 1140 PB - Elsevier CY - Amsterdam AN - OPUS4-20500 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Taffe, Alexander A1 - Gehlen, C. T1 - Validation of NDT methods in civil-engineering using reliability theory T2 - 4th European-American workshop on reliability of NDE CY - Berlin, Germany DA - 2009-06-24 KW - Validation KW - Non-destructive testing KW - Uncertainty KW - Reliability KW - Pile length measurement KW - GUM KW - Low-strain method PY - 2009 SN - 978-3-940283-17-7 IS - DGZfP-BB 116 (Th.1.A.3) SP - 1 EP - 6 AN - OPUS4-20653 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Keßler, S. A1 - Gehlen, C. A1 - Eng, M. A1 - Ebell, Gino A1 - Burkert, Andreas T1 - Validierung zerstörungsfreier Messmethoden zur zuverlässigen Erfassung von Bewehrungskorrosion N2 - Die Ergebnisse der Untersuchungen sind in ein Konzept zur Durchführung und Auswertung der Potentialfeld- und Polarisationsmessung eingegangen, um den Ingenieuren in der Praxis ein effizienten Werkzeug zur zerstörungsfreien Erfassung des Korrosionszustandes anzubieten. Das Ziel des Vorhabens wurde erreicht. KW - Potentialfeldmessung KW - Korrosion KW - Betonstahl KW - Elektrolytwiderstand PY - 2011 UR - http://www.cbm.bv.tum.de/fileadmin/w00bdr/www/pdf/Kurzberichte/KB_26.pdf IS - 26 SP - 1 EP - 2 PB - Technische Universität CY - München AN - OPUS4-23838 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Gehlen, C. A1 - Kränkel, T. A1 - Meng, Birgit A1 - Osterminski, K. A1 - Meyer, F. A1 - Schröder, P. ED - Zilch, K. T1 - Baustoffe im Betonbau N2 - In dem Kap. „Baustoffe im Betonbau“ werden zunächst die Baustoffe vorgestellt, die für die Herstellung von Stahlbeton- und Spannbetonbauwerken erforderlich sind (im Wesentlichen Beton, Betonstahl und Spannstahl). Herstellungsbedingte, typische Eigenschaftsprofile der Baustoffe werden aufgezeigt und ein Bezug zu entsprechenden Anwendungsgebieten hergestellt. KW - Betontechnik KW - Bindemittel KW - Betonstahl KW - Spannstahl KW - Herstellungsprozesse KW - Eigenschaften KW - Anwendungsbeispiele PY - 2019 SN - 978-3-658-21749-5 U6 - https://doi.org/10.1007/978-3-658-21749-5_15-1 SP - 1 EP - 63 PB - Springer Fachmedien Wiesbaden GmbH AN - OPUS4-54173 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Keßler, S. A1 - Gehlen, C. A1 - Ebell, Gino A1 - Burkert, Andreas T1 - Die Aussagegenauigkeit der Potentialfeldmessung N2 - Die Potentialfeldmessung ist ein Standardverfahren zur Zustandserfassung von Stahlbetonbauwerken. Sie dient der zerstörungsfreien Detektion von aktiv korrodierenden Bereichen. Die Aussagegenauigkeit der Potentialfeldmessung ist von großer wirtschaftlicher Bedeutung, da deren Messergebnisse eine wichtige Entscheidungsgrundlage für die Erarbeitung von Instandsetzungsmaßnahmen bilden. Zur Ermittlung der Aussagegenauigkeit der Potentialfeldmessung wird ein numerisches Verfahren vorgestellt. Die wichtigsten Einflussgrößen auf die Potentialfeldmessung wie Anodengröße, Elektrolytwiderstand und Messraster wurden im Hinblick auf die Aussagegenauigkeit ausgewertet. KW - Bauwerksüberwachung KW - Defekt KW - Detektion KW - Korrosion KW - Lebensdauer KW - Numerische Verfahren KW - Stromdichte-Potential-Kurven KW - Zerstörungsfrei KW - Zerstörungsfreies Messverfahren KW - Bauwerkserhaltung/Sanierung KW - Bewehrung KW - Potentialfeldmessung KW - Betonstahl KW - Elektrolytwiderstand PY - 2011 U6 - https://doi.org/10.1002/best.201100025 SN - 0005-9900 SN - 1437-1006 VL - 106 IS - 7 SP - 481 EP - 489 PB - Ernst CY - Berlin AN - OPUS4-23988 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Breit, W. A1 - Dauberschmidt, C. A1 - Gehlen, C. A1 - Sodeikat, C. A1 - Taffe, Alexander A1 - Wiens, U. T1 - Zum Ansatz eines kritischen Chloridgehaltes bei Stahlbetonbauwerken N2 - Der Chloridgehalt, ab dem bei der Bewehrung im Beton mit Korrosion gerechnet werden muss, wird als kritischer Chloridgehalt bezeichnet. Die Höhe dieses kritischen Chloridgehaltes bestimmt in hohem Maße den Instandsetzungsumfang und damit die Instandsetzungskosten. Zahlreiche Labor- und Bauwerksuntersuchungen belegen, dass dieser kritische Chloridgehalt von einer Vielzahl von Parametern abhängt und deswegen kein fester Wert sein kann. Aus diesem Grund ist es sinnvoll, über Betrachtung von Korrosions- bzw. Depassivierungswahrscheinlichkeiten einen unteren kritischen Chloridgehalt zu bestimmen, bei dem bei gegebenen Randbedingungen nur mit einer geringen Wahrscheinlichkeit (z. B. 5%-Fraktilwert) Korrosion von Stahl in Beton zu erwarten ist. Die Auswertung von zahlreichen Untersuchungen zeigt, dass der Ansatz eines kritischen Chloridgehaltes von 0, 5 M.-% bezogen auf den Zementgehalt bei Einhaltung bestimmter Randbedingungen mit einer hinreichend geringen Korrosionswahrscheinlichkeit korreliert und somit auch in Übereinstimmung mit der Richtlinie 'Schutz und Instandsetzung von Betonbauteilen' des DAfStb als unterer kritischer Chloridgehalt unter Praxisbedingungen anzusetzen ist. KW - Dauerhaftigkeit KW - Instandsetzung KW - Korrosion KW - Lebensdauer KW - Parkhäuser KW - Tiefgaragen KW - Betontechnologie KW - LIBS KW - Alkalität KW - Bewehrungsoberfläche KW - Bohrkernproben KW - Bohrmehl KW - Chloridgehalt KW - Chloridinduzierte Korrosion KW - Chloridprofile KW - Dauerhaftigkeitsbemessungen KW - Depassivierung KW - Depassivierungswahrscheinlichkeiten KW - Lochfraßkorrosion KW - Monitoring KW - Passivität KW - Potentialfeldmessungen KW - Probenentnahme KW - Richtlinie für Schutz und Instandsetzung KW - RL-SIB;Schädigungen KW - Baustoffe KW - Bauwerkserhaltung/Sanierung KW - Bauwerksüberwachung KW - Bewehrung PY - 2011 U6 - https://doi.org/10.1002/best.201100007 SN - 0005-9900 SN - 1437-1006 VL - 106 IS - 5 SP - 290 EP - 298 PB - Ernst CY - Berlin AN - OPUS4-23758 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Ebell, Gino A1 - Burkert, Andreas A1 - Gehlen, C. A1 - Keßler, S. T1 - Validierung zerstörungsfreier Messmethoden zur zuverlässigen Erfassung von Bewehrungskorrosion (Schlussbericht) N2 - Determining a pore structure’s mechanical and chemical data on lime rendering exposed outdoors and including masonry in the laboratory, with regard to their behaviour on moisture transport and weathering was the objective. In search of clues for a dose-response relation - i.e. upon a connection between the emission rate of SO2 and NOx on one hand and the degree of damage to mainly plaster having a lime component on the other - it has been of interest to what extent their structural characteristics including pore space are modified and so consequently also physico-technical properties and chemical composition. For determining corresponding criteria, a widely diversified spectrum of test methods such as to obtain data concerning porosity and moisture transport, mechanical behaviour, and chemistry as well is available. A description of the manufacture of plate-shaped rendering specimens with lime putty, industrially hydrated lime and dolomitic hydrate (the last two also having a cement admixture) and also hydraulic lime as binding agents is included. First deposition velocity and absorption rate for SO2 were determined in laboratory tests on these materials in dry and moist states. After their exposure on outdoor racks at six locations in the Berlin region with differing SO2 atmospheric contents over at least 5 years, the samples of course show timedependent modifications of chemical and physical qualities which are especially reflected in the form of profiles of structure, strength and concentration, e.g. for sulphate. Local climatic differences, however, partly exert a greater influence on material than emissions. Similar investigations were performed on samples of comparable composition exposed 4 and 17 years. But the real surprise is furnished by the renderings’ behaviour depending upon orientation and upon height at a building. Since weathering behaviour and moisture Transport (absorption, storage, release) are directly interdependent, further criteria are necessary for a critical assessment of a plasters’ pore structure. Starting from sands, plasters were characterized. The structural parameters were lastly influenced by the respective contents of sand, binder and mixing water. These results and those gained from bricks naturally find their expression in masonry sections manufactured there from, and above all in their capillary and evaporative behaviours, and also when applying different test liquids. Summary and cited literature is given at the end of this report. KW - Potentialfeldmessung KW - Potential mapping KW - Korrosion KW - Stahlbeton KW - Betonstahl KW - Merkblatt B 3 PY - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-336229 SP - 1 EP - 92 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) / Technische Universität München AN - OPUS4-33622 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haist, M. A1 - Link, J. A1 - Nicia, D. A1 - Leinitz, Sarah A1 - Baumert, C. A1 - von Bronk, T. A1 - Cotardo, D. A1 - Eslami Pirharati, M. A1 - Fataei, S. A1 - Garrecht, H. A1 - Gehlen, C. A1 - Hauschildt, I. A1 - Ivanova, I. A1 - Jesinghausen, S. A1 - Klein, C. A1 - Krauss, H.-W. A1 - Lohaus, L. A1 - Lowke, D. A1 - Mazanec, O. A1 - Pawelczyk, S. A1 - Pott, U. A1 - Radebe, N. W. A1 - Riedmiller, J. J. A1 - Schmid, H.-J. A1 - Schmidt, Wolfram A1 - Secrieru, E. A1 - Stephan, D. A1 - Thiedeitz, M. A1 - Wilhelm, M. A1 - Mechtcherine, V. T1 - Interlaboratory study on rheological properties of cement pastes and reference substances: comparability of measurements performed with different rheometers and measurement geometries N2 - This paper presents the results of an interlaboratory study of the rheological properties of cement paste and ultrasound gel as reference substance. The goal was to quantify the comparability and reproducibility of measurements of the Bingham parameters yield stress and plastic viscosity when measured on one specific paste composition and one particular ultrasound gel in different laboratories using different rheometers and measurement geometries. The procedures for both in preparing the cement paste and carrying out the rheological measurements on cement paste and ultrasound gel were carefully defined for all of the study’s participants. Different conversion schemes for comparing the results obtained with the different measurement setups are presented here and critically discussed. The procedure proposed in this paper ensured a reasonable comparability of the results with a coefficient of variation for the yield stress of 27% and for the plastic viscosity of 24%, despite the individual measurement series’ having been performed in different labs with different rheometers and measurement geometries. KW - Rheometry KW - Rheology KW - Interlaboratory test KW - Test setup KW - Testing procedure KW - Cement paste KW - Ultrasound gel PY - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-511220 SN - 1871-6873 VL - 53 IS - 4 SP - 92 PB - Rilem AN - OPUS4-51122 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Angst, U.M. A1 - Geiker, M.R. A1 - Alonso, M.C. A1 - Polder, R. A1 - Isgor, O.B. A1 - Elsener, B. A1 - Wong, H. A1 - Michel, A. A1 - Hornbostel, K. A1 - Gehlen, C. A1 - François, R. A1 - Sanchez, M. A1 - Criado, M. A1 - Sørensen, H. A1 - Hansson, C. A1 - Pillai, R. A1 - Mundra, Shishir A1 - Gulikers, J. A1 - Raupach, M. A1 - Pacheco, J. A1 - Sagüés, A. T1 - The effect of the steel-concrete interface on chloride-induced corrosion initiation in concrete: a critical review by RILEM TC 262-SCI N2 - The steel–concrete interface (SCI) is known to influence corrosion of steel in concrete. However, due to the numerous factors affecting the SCI—including steel properties, concrete properties, execution, and exposure conditions—it remains unclear which factors have the most dominant impact on the susceptibility of reinforced concrete to corrosion. In this literature review, prepared by members of RILEM technical committee 262-SCI, an attempt is made to elucidate the effect of numerous SCI characteristics on chloride-induced corrosion initiation of steel in concrete. We use a method to quantify and normalize the effect of individual SCI characteristics based on different literature results, which allows comparing them in a comprehensive context. It is found that the different SCI characteristics have received highly unbalanced research attention. Parameters such as w/b ratio and cement type have been studied most extensively. Interestingly, however, literature consistently indicates that those parameters have merely a moderate effect on the corrosion susceptibility of steel in concrete. Considerably more pronounced effects were identified for (1) steel properties, including metallurgy, presence of mill scale or rust layers, and surface roughness, and (2) the moisture state. Unfortunately, however, these aspects have received comparatively little research attention. Due to their apparently strong influence, future corrosion studies as well as developments towards predicting corrosion initiation in concrete would benefit from considering those aspects. Particularly the working mechanisms related to the moisture conditions in microscopic and macroscopic voids at the SCI is complex and presents major opportunities for further research in corrosion of steel in concrete. KW - Steel-concrete interface KW - Interfacial transition zone KW - Durability KW - Corrosion KW - Inhomogeneity KW - Variability PY - 2019 U6 - https://doi.org/10.1617/s11527-019-1387-0 VL - 52 IS - 4 SP - 88-1 EP - 88-25 PB - Springer Nature AN - OPUS4-48689 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mayer, T. F. A1 - Dauberschmidt, C. A1 - Bruns, M. A1 - Eichler, T. A1 - Wiens, U. A1 - Mietz, Jürgen A1 - Gehlen, C. A1 - Ebell, Gino A1 - Gerhard, G. A1 - Osterminski, K. T1 - Das Instandsetzungsprinzip W-Cl N2 - Während das Instandsetzungsprinzip W bei carbonatisierungsinduzierter Korrosion seit vielen Jahren als Standardverfahren etabliert ist, wird seine Anwendbarkeit bei chloridinduzierter Korrosion (W-Cl) in der Fachwelt bis heute kontrovers diskutiert. Zwar ergeben sich aus seiner Anwendung gegenüber anderen Instandsetzungsverfahren auf den ersten Blick u. U. deutliche wirtschaftliche Vorteile, allerdings besteht bei diesem Verfahren ein deutlich höheres Risiko, dass das Instandsetzungsziel nicht erreicht wird. Im vorliegenden Beitrag werden die technischen Grundlagen des Instandsetzungsprinzips W-Cl sowie der aktuelle Kenntnisstand - sowohl für den gerissenen als auch für den ungerissenen Beton - dargestellt und baurechtliche Konsequenzen, die sich aus dem erhöhten Ausführungsrisiko ergeben, diskutiert. Korrosionsmonitoring als Element zum Nachweis des Instandsetzungserfolgs bei Anwendung des Prinzips W-Cl wird vorgestellt. Anhand von Anwendungsbeispielen werden sowohl die Risiken, die mit dem Verfahren verbunden sind, als auch das Potenzial bei erfolgreicher Anwendung veranschaulicht. KW - Korrosion KW - Instandsetzung KW - W-Cl KW - Risse PY - 2020 U6 - https://doi.org/10.1002/bate.201900083 SN - 0932-8351 VL - 97 IS - 1 SP - 2 EP - 10 PB - Ernst & Sohn CY - Berlin AN - OPUS4-50246 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Diewald, F. A1 - Epple, Niklas A1 - Kraenkel, T. A1 - Gehlen, C. A1 - Niederleithinger, Ernst T1 - Impact of External Mechanical Loads on Coda Waves in Concrete N2 - During their life span, concrete structures interact with many kinds of external mechanical loads. Most of these loads are considered in advance and result in reversible deformations. Nevertheless, some of the loads cause irreversible, sometimes unnoticed changes below the macroscopic scale depending on the type and dimension of the impact. As the functionality of concrete structures is often relevant to safety and society, their condition must be known and, therefore, assessed on a regular basis. Out of the spectrum of non-destructive monitoring methods, Coda Wave Interferometry using embedded ultrasonic sensors is one particularly sensitive technique to evaluate changes to heterogeneous media. However, there are various influences on Coda waves in concrete, and the interpretation of their superimposed effect is ambiguous. In this study, we quantify the relations of uniaxial compression and uniaxial tension on Coda waves propagating in normal concrete. We found that both the signal correlation of ultrasonic signals as well as their velocity variation directly reflect the stress change in concrete structures in a laboratory environment. For the linear elastic range up to 30% of the strength, we calculated a velocity variation of −0.97‰/MPa for compression and 0.33%/MPa for tension using linear regression. In addition, these parameters revealed even weak irreversible changes after removal of the load. Furthermore, we show the time-dependent effects of shrinkage and creep on Coda waves by providing the development of the signal parameters over time during half a year together with creep recovery. Our observations showed that time-dependent material changes must be taken into account for any comparison of ultrasonic signals that are far apart in time. The study’s results demonstrate how Coda Wave Interferometry is capable of monitoring stress changes and detecting even small-size microstructural changes. By indicating the stated relations and their separation from further impacts, e.g., temperature and moisture, we anticipate our study to contribute to the qualification of Coda Wave Interferometry for its application as an early-warning system for concrete structures. KW - Ultrasound KW - Coda Wave Interferometry (CWI) KW - Mechanical Load KW - Microstructure KW - Concrete PY - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-556878 SN - 1996-1944 VL - 15 IS - 16 SP - 1 EP - 15 PB - MDPI AN - OPUS4-55687 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -