TY - CONF A1 - Dudek, Gabriele T1 - Auswertung und Software T2 - 1. Workshop "Isotopenverdünnungsanalyse mit ICP-MS" CY - Berlin, Germany DA - 2002-11-11 PY - 2002 N1 - Geburtsname von Dudek, Gabriele: Wermann, G. - Birth name of Dudek, Gabriele: Wermann, G. AN - OPUS4-3012 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dudek, Gabriele A1 - Pritzkow, Wolfgang A1 - Riebe, Gundel A1 - Görner, Wolf A1 - Alber, D. T1 - Characterization of neutron transmuted zinc traces in pure copper materials by isotope dilution mass spectrometry N2 - The neutron transmutation doping (NTD) of highly pure copper with zinc was investigated as a promising means of achieving controlled gradation of the zinc content in the range 1-20 wg g-1. The doping process leads to the enrichment of two stable isotopes 64Zn and 66Zn in a ratio which differs from that of natural isotopic distribution. Mass spectrometric investigations by thermal ionization mass spectrometry (TIMS) were performed to validate the results obtained by gamma spectrometry. The investigations included both determination of the isotopic ratios of the doped zinc isotopes and the analysis of the accumulated zinc contents by isotope dilution (ID) analysis. Thereby a sample-specific correction of the blank could be performed because the isotope 68Zn was not influenced, because of the transmutation process. The results obtained by TIMS prove the strict proportionality of the doped zinc content, in the range 5 to 20 wg g-1, to the neutron fluence. Comparison with gamma spectrometric results showed a very good agreement within the uncertainties. PY - 2001 U6 - https://doi.org/10.1007/s002160100784 SN - 0937-0633 N1 - Geburtsname von Dudek, Gabriele: Wermann, G. - Birth name of Dudek, Gabriele: Wermann, G. VL - 370 IS - 5 SP - 606 EP - 611 PB - Springer CY - Berlin AN - OPUS4-1145 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Anita A1 - Dudek, Gabriele T1 - Messunsicherheit Aktuell T2 - Erfahrungsaustausch der Begutachter des Sektorkomitees Chemie des DAP in Verbindung mit einer Schulung CY - Berlin, Germany DA - 2005-09-22 PY - 2005 N1 - Geburtsname von Dudek, Gabriele: Wermann, G. - Birth name of Dudek, Gabriele: Wermann, G. AN - OPUS4-11086 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dudek, Gabriele T1 - Neue technische Dokumente - Internationale Entwicklungen T2 - 12. DAR-Tutorenerfahrungsaustausch CY - Berlin, Germany DA - 2005-03-16 PY - 2005 N1 - Geburtsname von Dudek, Gabriele: Wermann, G. - Birth name of Dudek, Gabriele: Wermann, G. AN - OPUS4-11646 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Görner, Wolf A1 - Berger, Achim A1 - Ecker, Klaus A1 - Haase, Oskar A1 - Hedrich, Martina A1 - Segebade, Christian A1 - Weidemann, Gerd A1 - Dudek, Gabriele T1 - Broad band application of combined instrumental photon and neutron activation analysis PY - 2001 SN - 0236-5731 SN - 1588-2780 SN - 1417-2097 N1 - Geburtsname von Dudek, Gabriele: Wermann, G. - Birth name of Dudek, Gabriele: Wermann, G. VL - 248 IS - 1 SP - 45 EP - 52 PB - Elsevier Sequoia CY - Lausanne AN - OPUS4-11229 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dudek, Gabriele A1 - Görner, Wolf A1 - Gawlik, D. A1 - Alber, D. T1 - Use of neutron transmutation doping for the preparation of a new candidate reference material for zinc determination in metallic copper N2 - A new application of neutron transmutation doping is described. The method is useful to prepare graded zinc contents in highly pure copper materials. The research reactor BER II at the Hahn-Meitner-Institute, Berlin served as a neutron source. The zinc content produced in the samples was analyzed by determining the 65Zn-activity via gamma-spectrometry. Simultaneously irradiated flux monitors were used to determine the neutron flux density. Since cylindrical sample geometries are favorable for a reference material application in optical emission (OE) spectroscopy, the spatial distribution of the induced activity in a cylinder with a diameter of 8 mm and a length of 35 mm was investigated. PY - 2000 U6 - https://doi.org/10.1023/A:1006723718395 SN - 0236-5731 SN - 1588-2780 SN - 1417-2097 N1 - Geburtsname von Dudek, Gabriele: Wermann, G. - Birth name of Dudek, Gabriele: Wermann, G. VL - 245 IS - 1 SP - 87 EP - 90 PB - Elsevier Sequoia CY - Lausanne AN - OPUS4-11230 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dudek, Gabriele A1 - Alber, D. A1 - Pritzkow, Wolfgang A1 - Riebe, Gundel A1 - Vogl, Jochen A1 - Görner, Wolf T1 - Determination of the beta- branching ratio of 64Cu by mass spectrometric investigations of the decay products in neutron transmuted copper N2 - The ?- branching ratio of 64Cu was determined by investigating the resulting decay products in copper doped by neutron transmutation. The numbers of 64Zn and 64Ni atoms were analyzed using isotope dilution analysis combined with thermal ionization mass spectrometry. A ?- branching ratio of (38.06±0.30)% was obtained, which agrees with the study of Kawada (Appl. Radiat. Isot. 37 (1) (1986) 7) to a higher accuracy. However, our result differs from the value cited in the NUDAT database of (39.0±0.3)%. KW - NTD KW - Copper KW - Zinc KW - Nickel KW - Branching ratio KW - Cu-64 KW - TIMS KW - IDMS KW - Isotope dilution KW - Thermal ionization mass spectrometry KW - Neutron transmutation doping PY - 2002 U6 - https://doi.org/10.1016/S0969-8043(01)00180-4 SN - 0883-2889 SN - 0969-8043 N1 - Geburtsname von Dudek, Gabriele: Wermann, G. - Birth name of Dudek, Gabriele: Wermann, G. VL - 56 SP - 145 EP - 151 PB - Elsevier CY - Amsterdam AN - OPUS4-7221 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dudek, Gabriele T1 - Aktuelle Themen und Trends T2 - 11. DAR-Tutorenerfahrungsaustausch CY - Berlin, Germany DA - 2004-03-03 PY - 2004 N1 - Geburtsname von Dudek, Gabriele: Wermann, G. - Birth name of Dudek, Gabriele: Wermann, G. AN - OPUS4-4957 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dudek, Gabriele T1 - Overview of German accreditation system and implementation of the EU legal requirements T2 - Brazilian Technical Mission to Europe (New and Global Approach experiences and the New Legislative Framework), Project BRA/UEB7-311 CY - Bonn, Germany DA - 2008-06-20 PY - 2008 AN - OPUS4-17699 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dudek, Gabriele T1 - Bericht aus dem Akkreditierungsbeirat: Ermittlungsprozess, ermittelte Regeln und weiteres Vorgehen T2 - 1. Nationale Akkreditierungskonferenz CY - Berlin, Germany DA - 2011-06-08 PY - 2011 AN - OPUS4-27261 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dudek, Gabriele T1 - Akkreditierung - Was gibt es zu R(r)egeln? - Grundsätze und Rahmenbedingungen der Regelentstehung T2 - Akkreditierungsforum 2012 CY - Berlin, Germany DA - 2012-06-11 PY - 2012 AN - OPUS4-27262 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mirtsch, Mona A1 - Blind, K. A1 - Koch, Claudia A1 - Dudek, Gabriele T1 - Information security management in ICT and non-ICT sector companies: A preventive innovation perspective N2 - Despite the growing dependence of companies on information technology and the increasingly negative impact of security incidents worldwide, there is little research on the management of information security at the company level. This paper seeks to expand knowledge on the implementation of an information security management system based on the widely used international standard ISO/IEC 27001. We present motives, experienced impacts, and obstacles related to ISO/IEC 27001 implementation using data from a survey of 125 ISO/IEC 27001 certified companies in Germany. Since adoption rates vary between ICT and non-ICT sector companies, we highlight sector-related variations. We classify the adoption of this standard as a preventive organizational innovation and apply Structural Equation Modeling to unearth explanations for the comparatively low adoption of this management system standard among companies outside the ICT sector. We, therefore, derive recommendations for policymakers, standardization, and certification bodies to foster its diffusion. KW - Information Security KW - ISO/IEC 27001 KW - Management system standard KW - Certification KW - Information security management system (ISMS) KW - Preventive Innovation KW - Resource-based-view KW - Institutional theory PY - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-531037 SN - 0167-4048 VL - 109 IS - 10 SP - 1 EP - 23 PB - Elsevier Ltd. AN - OPUS4-53103 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dudek, Gabriele A1 - Agasty, Amit A1 - Kandler, Figen T1 - Klassifizierung von Feuerwerk in Metallkäfigen N2 - Die Untersuchungen richten sich auf Verbundfeuerwerk und Feuerwerksbatterien, welche mit Zwischenverpackungen, bestehend aus Metallkäfigen und Metallbändern, für den Transport versehen wurden. Es wird gezeigt, wie sich diese Zwischenverpackungen auf unterschiedliche Feuerwerksartikel auswirken können und welche Klassifizierungen resultieren. Es wurde beobachtet, dass die Wirkung der Metallkäfige bei bestimmten Konstellationen äußerst nachteilig ist und eine Massenexplosion befördern kann. T2 - BGRCI Erfahrungsaustausch „Explosivstoff-Industrie“ 2022 Sachgebiet „Explosionsgefährliche Stoffe“ CY - Bremerhaven, Germany DA - 22.09.2022 KW - Lagergruppenzuordnung KW - Feuerwerk KW - Pyrotechnik KW - Transportklassifizierung PY - 2022 AN - OPUS4-55785 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dudek, Gabriele T1 - Stand der Normung zur Konformitätsbewertung N2 - Überblick über die Normung zur Konformitätsbewertung- (ISO CASCO Toolbox) Revision der ISO/IEC 17025 – Anforderungen an Labors Revision der ISO/IEC 17011 - Anforderungen an Akkreditierungsstellen Revision des ISO Guide 34 (neu: ISO 17034) -Anforderungen an die Kompetenz von Herstellern von Referenzmaterialien T2 - Forum Labormanager/in 2016 CY - Potsdam, Germany DA - 09.06.2016 KW - Normung PY - 2016 AN - OPUS4-36463 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dudek, Gabriele T1 - Multistandort Akkreditierung N2 - Akkreditierte Konformitätsbewertungsstellen mit mehreren Standorten unterliegen speziellen Vorgaben bei der Akkreditierung. Dies ist insbesondere der Fall, wenn Standorte im Ausland in die Akkreditierung einbezogen werden. Schwerpunkte der Regelungen sind Zweck und Geltungsbereich der Regelung; Standortregelung, Voraussetzungen Anforderungen an die Leitung etc. T2 - DAkkS - Audits und flexible Akkreditierung CY - Potsdam, Germany DA - 12.10.2016 KW - Konformitätsbewertung KW - Akkreditierungsverfahren KW - Rechtsträger PY - 2016 AN - OPUS4-38070 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dudek, Gabriele T1 - Einsatz von Referenzmaterialien im akkreditierten Labor N2 - Referenzmaterialien, insbesondere zertifizierte Referenzmaterialien spiele im Labor eine wichtige Rolle, besonders bei der Methodenvalidierung. Der zweckmäßige Einsatz und die richtige Anwendung sowie eine Einführung in metrologische Rückführbarkeit und die Besonderheiten bei chemischen Messungen wird vorgestellt. T2 - DAkkS - Audits und flexible Akkreditierung CY - Potsdam, Germany DA - 12.10.2016 KW - Rückführung KW - Analysenverfahren PY - 2016 AN - OPUS4-38071 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dudek, Gabriele T1 - Das harmonisierte System der europäischen Akkreditierung N2 - Die Akkreditierung hat in den letzten 5 Jahren einen rapiden Wandel durchlaufen. Die zugrundeliegenden Prinzipien und Prozesse der Akkreditierung sowie die grundlegenden Festlegungen zur Begutachtung werden vorgestellt und ein Überblick über den aktuellen Stand der Regelsetzung gegeben. T2 - DAkkS - Audits und flexible Akkreditierung CY - Potsdam, Germany DA - 12.10.2016 KW - Konformitätsbewertung KW - Akkreditierung PY - 2016 AN - OPUS4-38072 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dudek, Gabriele T1 - DAkkS - flexible Akkreditierung N2 - Wann profitieren Laboratorien von einer flexiblen Akkreditierung und welche Voraussetzungen sind zu erfüllen, um bestimmte Kategorien der Flexiblen Akkreditierung zu erlangen? Sektorale Regelungen zur flexiblen Akkreditierung wurden in den letzten Jahren zunehmend entwickelt. T2 - DAkkS - Audits und flexible Akkreditierung CY - Potsdam, Germany DA - 12.10.2016 KW - DAkkS KW - Produktzertifizierung PY - 2016 AN - OPUS4-38073 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dudek, Gabriele A1 - Müller-Schöll, Ch. T1 - Revision of ISO/IEC 17025 - Direct voice from the standadization group N2 - The revision of ISO / IEC 17025 implicates some changes for accredited and non-accredited laboratories. Attention is drawn to the foreseeable changes and an overview of the state of standardization from the standpoint of standardization experts is given. T2 - ISO CASCO meeting WG 44 CY - Lucerne, Switzerland DA - 27.09.2016 KW - standards for conformity assessment PY - 2016 AN - OPUS4-38074 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dudek, Gabriele T1 - Revision der ISO / IEC 17025 N2 - Normen zur Konformitätsbewertung (ISO CASCO Toolbox). Die "neue" ISO 9001; Auswirkung auf die ISO CASCO Toolbox - The Common Elements-Implementierung der Common Elements; Anforderungen an Managementsysteme; Neue Struktur der ISO/IEC 17025 T2 - DAkkS - Audits und flexible Akkreditierung CY - Potsdam, Germany DA - 12.10.2016 KW - Revision KW - Common Elements KW - Metrologische Rückführbarkeit PY - 2016 AN - OPUS4-38067 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dudek, Gabriele T1 - Flexible Akkreditierung- Der Leitfaden aus der Sicht der DAkkS T2 - Audits und flexible Akkreditierung, Klinkner & Partner CY - Potsdam, Germany DA - 2014-09-29 PY - 2014 AN - OPUS4-32689 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dudek, Gabriele T1 - Die neue ISO/IEC 17025 - Was ändert sich für Prüf- und Kalibrierlaboratorien? N2 - Die Revision der ISO/IEC 17025 ist abgeschlossen. Der Vortrag gibt einen Überblick über die Einflüsse auf die neue Norm und die Veränderungen, die die neue Ausgabe mit sich bringt. T2 - DGUV-Workshop CY - St. Augustin, Germany DA - 01.03.2018 KW - Konformitätsbewertung KW - ISO/IEC 17025 KW - Prüflaboratorien KW - Akkreditierung PY - 2018 AN - OPUS4-44358 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dudek, Gabriele A1 - Koch, Claudia T1 - Accreditation, conformity assessment and national Quality Infrastructure - The system in Germany and areas of research N2 - The presntation gives an overview of the QI System in Germany and Europe, especially accreditation and conformity assessment. It further highlights some areas of research conducted in BAM with regard to elements of QI. T2 - National Quality Infrastructure • Beijing Forum CY - Peking, People's Republic of China DA - 08.01.2019 KW - QI KW - Accreditation KW - Quality infrastructure KW - Qualitätsinfrastruktur KW - Conformity assessment KW - Konformitätsbewertung KW - Akkreditierung PY - 2019 AN - OPUS4-49123 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Mirtsch, Mona A1 - Koch, Claudia A1 - Dudek, Gabriele A1 - Blind, K. T1 - Die Nutzung und Wirkung genormter Managementsysteme N2 - Das Ziel der Initiative QI-FoKuS ist es, eine Datenbasis für neue wissenschaftliche Erkenntnisse zu Einflussfaktoren und Effekten in der Konformitätsbewertung und Akkreditierung zu schaffen. Ende 2019 wurden in einer ersten Online-Erhebung Unternehmen verschiedener Branchen und Größenklassen in Deutschland zur Nutzung von Managementsystemen und ihren Wirkungen befragt. Diese umfasste weit verbreitete genormte Managementsysteme wie ISO 9001 und ISO 14001 genauso wie bisher wenig untersuchte Systeme wie die ISO 50001 oder ISO/IEC 27001. Es konnten 180 Fragebögen für die vorliegende Studie ausgewertet werden. KW - QI-FoKuS KW - Managementsysteme KW - ISO 9001 KW - ISO/IEC 27001 KW - ISO 50001 KW - ISO 14001 KW - Zertifizierung KW - Konformitätsbewertung KW - Akkreditierung PY - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-510831 SN - 978-3-9818564-3-9 VL - 1 SP - 1 EP - 44 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-51083 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dudek, Gabriele T1 - Aktueller Stand der Normung N2 - Normung, Normen zur Konformitätsbewertung ISO 9001:2015 - Auswirkung auf die ISO CASCO Toolbox Revision der ISO/IEC 17011 T2 - FB 6 Sitzung CY - Berlin, Germany DA - 11.02.2016 KW - Normung PY - 2015 AN - OPUS4-35638 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dudek, Gabriele T1 - Quality Infrastructure T2 - Visit of a Delegation of the Egyptian Accreditation Council CY - Berlin, Germany DA - 2015-09-16 PY - 2015 AN - OPUS4-35290 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dudek, Gabriele T1 - Aktueller Stand der Normung und Trends in der Konformitätsbewertung T2 - Forum Qualitätsmanagement CY - Potsdam, Germany DA - 2015-06-25 PY - 2015 AN - OPUS4-35291 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dudek, Gabriele T1 - Aktueller Stand der Normung T2 - Fachbeirat 1 Sitzung CY - Berlin, Germany DA - 2015-09-28 PY - 2015 AN - OPUS4-35292 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dudek, Gabriele T1 - DAkkS - flexibler Akkreditierung T2 - DAkkS - Audits und Flexibilisierung des Akkreditierungsbereiches CY - Potsdam, Germany DA - 2015-11-25 PY - 2015 AN - OPUS4-35293 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dudek, Gabriele T1 - Aktueller Stand der Normung und Trends in der Konformitätsbewertung T2 - Akkreditierungskonferenz 2015 CY - Berlin, Germany DA - 2015-06-10 PY - 2015 AN - OPUS4-35294 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dudek, Gabriele T1 - Aktueller Stand der Normung zur ISO/IEC 17025 T2 - EUROLAB-D Sitzung CY - Berlin, Germany DA - 2016-01-21 PY - 2016 AN - OPUS4-35295 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dudek, Gabriele T1 - Die neue ISO/IEC 17025 – Was ändert sich für Prüf- und Kalibrierungslaboratorien? N2 - Der Vortrag gibt einen Überblick über die Revision der ISO/IEC 17025, einschließlich der Einflüsse auf die Revision und die Veränderungen bezüglich der Anforderungen an Laboratorien. T2 - Shimadzu Expertenzirkel Umweltanalytik CY - Dusseldorf, Germany DA - 04.07.2019 KW - ISO/IEC 17025 KW - Konformitätsbewertung KW - Messunsicherheit KW - Laboratorien PY - 2019 AN - OPUS4-48313 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dudek, Gabriele T1 - Aktuelle Entwicklungen im Bereich der CASCO Normen N2 - Der Vortrag gibt einen Überblick über die Weiterentwicklungen der Normung im Bereich Konformitätsbewertung. Die sogenannten Common Elements werden vorgestellt. Deren Änderungen haben großen Einfluß auf die kommenden Revisionen der CASCO Normnen T2 - Erfahrungsaustausch, Verband akkreditierter Zertifizierungsstellen CY - Berlin, Germany DA - 07.05.2019 KW - Konformitätsbewertung KW - ISO CASCO PY - 2019 AN - OPUS4-48314 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Mirtsch, Mona A1 - Koch, Claudia A1 - Dudek, Gabriele A1 - Blind, K. T1 - Die Nutzung und Wirkung der Norm ISO/IEC 27001 für Informationssicherheit in Unternehmen in Deutschland N2 - Das Ziel der Initiative QI-FoKuS ist es, eine Datenbasis für neue wissenschaftliche Erkenntnisse zu Einflussfaktoren und Effekten in der Konformitätsbewertung und Akkreditierung zu schaffen und hierbei insbesondere auch auf aktuelle Trends und Entwicklungen einzugehen. Von Januar bis März 2020 wurden in einer Online-Erhebung Unternehmen verschiedener Branchen und Größenklassen in Deutschland zur Nutzung und den Wirkungen ihres zertifizierten Managementsystems für Informationssicherheit nach ISO/IEC 27001 befragt. Es konnten 125 vollständig ausgefüllte Fragebögen für die vorliegende Studie ausgewertet werden. KW - Managementsysteme KW - ISO/IEC 27001 KW - Informationssicherheit KW - Zertifizierung KW - Konformitätsbewertung KW - Akkreditierung KW - QI-FoKuS PY - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-517922 VL - 2 SP - 1 EP - 28 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-51792 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lohrer, Christian A1 - Dudek, Gabriele T1 - Kalte Pyrotechnik - ein heißes Thema N2 - Beschreibung der Eigenschaften von vermeintlich kalter Pyrotechnik und die Gefährdungen bei der Verwendung. Beitrag ist als VS-NfD (Verschlusssache - Nur für den Dienstgebrauch) eingestuft. KW - Aerosole KW - Pyrotechnik KW - Nitrocellulose PY - 2021 SP - 32 EP - 38 PB - Bundeskriminalamt (BKA) CY - Wiesbaden AN - OPUS4-52400 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dudek, Gabriele T1 - Challenges and Impact of the ISO/IEC 17025 Revision N2 - The standard ISO/IEC 17025 is recently under revision. The new requirements will lead to changes for accredited and non-accredited laboratories. An overview of the current draft (DIS) is presented and a few general conditions are considered. T2 - Simpósio “Desafios da Inovação” RELACRE CY - Lisbon, Portugal DA - 09.05.2017 KW - Revision PY - 2017 AN - OPUS4-40250 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dudek, Gabriele T1 - Die neue ISO/IEC 17025 – Was ändert sich für Prüf- und Kalibrierlaboratorien? N2 - Der Vortrag gibt einen Überblick über die inhaltlichen und formalen Änderungen, die mit der Revision der ISO/IEC 17025 einhergehen. Da die Norm kurz vor der Veröffentlichung steht, bilden die Eckpunkte der Revision und die wesentlichen Änderungen der neuen Ausgabe den Schwerpunkt des Vortrages. T2 - 8. VDI-Fachtagung Messunsicherheit 2017 CY - Erfurt, Germany DA - 15.11.2017 KW - Kalibrierlaboratorien KW - Änderungen KW - Schwerpunkt PY - 2017 AN - OPUS4-43507 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dudek, Gabriele T1 - Accreditation - What is expected from a competent laboratory? N2 - The presentation provides an overview of the basics of accreditation and the requirements placed on competent laboratories worldwide. T2 - Biocapture Workshop and Training Course CY - Berlin, Germany DA - 03.11.2017 KW - Basics of accreditation KW - Laboratories worldwide PY - 2017 AN - OPUS4-43509 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dudek, Gabriele T1 - Update ISO/IEC 17025 – jetzt wird es konkret! N2 - Der Vortag gibt einen Überblick über die inhaltlichen und formalen Änderungen, die mit der Revision der ISO/IEC 17025 einhergehen. Da die Norm kurz vor der Veröffentlichung steht, bilden die Eckpunkte der Revision und die wesentlichen Änderungen der neuen Ausgabe den Schwerpunkt des Vortrages. T2 - Eurolab-D Seminar CY - Berlin, Germany DA - 09.11.2017 KW - Formale Änderungen KW - Revision Norm KW - Veröffentlichung PY - 2017 AN - OPUS4-43512 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dudek, Gabriele T1 - Was ändert sich bei der Revision der din en ISO/IEC 17025? N2 - Der Vortag gibt einen Überblick über den aktuellen Entwurf der ISO/IEC 17025 (DIS), einschließlich der inhaltlichen und formalen Änderungen, die mit der Revision einhergehen. Im zweiten Teil wird auf wichtige Neuerungen bei der Deutschen Akkreditierungsstelle, insbesondere im Umweltsektor, eingegangen. T2 - AQS Jahrestagung CY - Stuttgart, Germany DA - 08.03.2017 KW - Laboratorien KW - ISO/IEC 17025 KW - Akkreditierung PY - 2017 AN - OPUS4-39360 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dudek, Gabriele T1 - Allgemeine Anforderungen an die Kompetenz von Prüf- und Kalibrierlaboratorien N2 - Der Workshop beinhaltet Anwendungsbereich und Begrifflichkeiten der 17025, allgemeine Anforderungen, strukturelle Anforderungen und Prüfung von Anfragen, Angeboten und Verträgen T2 - DIN/DAkkS-Praxistag CY - Berlin, Germany DA - 15.02.2017 KW - Anforderungen KW - 17025 KW - Unparteilichkeit PY - 2017 AN - OPUS4-42383 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dudek, Gabriele T1 - Die neue ISO/IEC 17025 - Was ändert sich für Prüf- und Kalibrierlabors? N2 - Die neue Norm ISO/IEC 17025 wird in wenigen Monaten erscheinen. Damit werden einige Änderungen der generellen Anforderungen auf die Laboratorien zukommen. Schwerpunkt des Vortrag bilden die Eckpunkte der Revision und die wesentlichen Änderungen, die mit der neuen Ausgabe der ISO/IEC 17025 einhergehen. T2 - BASF-Schulung CY - Ludwigshafen, Germany DA - 26.09.2017 KW - Neue Norm KW - Revision PY - 2017 AN - OPUS4-42227 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dudek, Gabriele A1 - Agasty, Amit T1 - Classification of fireworks in metal wire cages N2 - Classification tests (UN 6a and 6c) of firework batteries and composite fireworks in metal wire cages were presented. The cages are intended to be used during transport to prevent the occurrence of projections in the event of a fire. However, the results of this investigation showed that, particularly in the case of articles with whistle effects packed in this way, confinement phenomena occurred that lead to mass explosions and must be considered in future classification. T2 - International Group of experts on the explosion risks of Unstable Substances (IGUS)- Joint Meeting CIE/IGUS-EPP CY - Madrid, Spain DA - 17.04.2023 KW - Feuerwerk KW - Pyrotechnik KW - Transportklassifizierung KW - Lagergruppenzuordnung PY - 2023 AN - OPUS4-57388 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dudek, Gabriele A1 - Christian, Lohrer T1 - Benefits of Digitization N2 - The presentation will address recent achievements through the introduction of a digital seal and outline the potential future framework for AI-assisted classification decisions in the area of explosives or pyrotechnics transportation. T2 - International Group of experts on the explosion risks of Unstable Substances (IGUS)- Joint Meeting CIE/IGUS-EPP CY - Madrid, Spain DA - 20.04.2023 KW - Explosivstoffe KW - Pyrotechnik KW - Transportklassifizierung KW - Digitalisierung KW - Lagergruppenzuordnung PY - 2023 AN - OPUS4-57410 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -