TY - JOUR A1 - Gähde, J. A1 - Fischer, T. A1 - Falkenhagen, Jana A1 - Dittmar, A. A1 - Gnauck, R. T1 - Interaction of Polyurethane Model Compounds with Metal Oxides KW - Polyurethane model compounds KW - Mono layers KW - Specific interaction at oxide surfaces KW - Catalyzed hydrolysis PY - 1997 SN - 0021-8995 SN - 1097-4628 VL - 64 SP - 2449 EP - 2455 PB - Wiley InterScience CY - Hoboken, NJ AN - OPUS4-2156 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hoang, D. L. A1 - Dittmar, A. A1 - Radnik, J. A1 - Witke, Klaus A1 - Brzezinka, Klaus-Werner T1 - Redox behaviour of La-Cr compounds formed in CrOX/La2O3 mixed oxides and CrOX/La2O3/ZrO2 catalysts N2 - The redox behaviour of chromium oxide in CrOx/La2O3, CrOx/La2O3/ZrO2 and CrOx/ZrO2 mixed oxide systems has been investigated by temperature-programmed reduction (TPR), photoelectron spectroscopy (XPS) and Raman spectroscopy (RS). The formation of La-Cr compounds such as La2CrO6, LaCrO4 was shown to occur by calcination of CrOx/La2O3 and CrOx/La2O3/ZrO2 at 600 °C. With a Cr content of ca. 4 wt.%, it was revealed that, having been reduced to Cr3+-containing compounds, La2CrO6 and/or LaCrO4 in both systems may be restored by reoxidation at 600 °C. In the case of CrOx/La2O3/ZrO2 catalysts, it is suggested that these compounds were real surface species anchored as an overlayer on zirconia. Such a structure may stabilise, on the one hand, the tetragonal modification of zirconia and, on the other hand, highly dispersed state of Cr species in calcined as well as in reduced catalysts. KW - Chromia containing catalysts KW - Redox reversibility KW - La-Cr compounds KW - Temperature-programmed reduction KW - XPS KW - Raman spectroscopy PY - 2003 U6 - https://doi.org/10.1016/S0926-860X(02)00375-7 SN - 0926-860X SN - 1873-3875 VL - 239 IS - 1-2 SP - 95 EP - 110 PB - Elsevier CY - Amsterdam AN - OPUS4-2260 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hoang, D. L. A1 - Dittmar, A. A1 - Schneider, M. A1 - Trunschke, A. A1 - Lieske, H. A1 - Brzezinka, Klaus-Werner A1 - Witke, Klaus T1 - Evidence of lanthanum-chromium mixed oxides formed in CrOx/La2O3 model catalysts N2 - CrOx/La2O3 mixed oxides, prepared by impregnating La2O3 with appropriate aqueous solutions of (NH4)2CrO4 and calcining at 600 °C for 4 h, have been investigated by means of XRD, TPR, XPS, DRIFTS, and Raman spectroscopy (RS). The formation of the compounds La2CrO6, La(OH)CrO4 and LaCrO4 under these conditions was evidenced. Strong peaks at 864, 884, 913, and 921 cm-1, as well as weak peaks at 136, 180, 354, 370, and 388 cm-1 in the RS spectrum of CrOx/La2O3 have been assigned to La2CrO6. KW - Lanthanum-chromium mixed oxides KW - La2CrO6 KW - LaCrO4 KW - TPR KW - XPS KW - XRD KW - DRIFTS KW - Raman spectroscopy PY - 2003 U6 - https://doi.org/10.1016/S0040-6031(02)00491-4 SN - 0040-6031 SN - 1872-762X VL - 400 SP - 153 EP - 163 PB - Elsevier CY - Amsterdam AN - OPUS4-2397 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Noack, M. A1 - Dittmar, A. A1 - Stöhr, M. A1 - Georgi, G. A1 - Adam, Christian A1 - Brenneis, Rudolf A1 - Kley, Gerd A1 - Lehmann, Annekatrin A1 - Handte, J. A1 - Meichle, K. A1 - Schwake, M. T1 - Thermische Regenerierung von Zeolithpulver Typ X aus der VOC-Luftreinigung N2 - Für die Entfernung von VOC (volatile organic compounds) aus der Luft von Fertigungsstätten werden vielfach mikroporöse Adsorbentien eingesetzt. Die gereinigte Luft wird rezyklisiert. Für die mit VOC beladenen Adsorbentien wird ein Regenerierungsweg für den mehrfachen Gebrauch gesucht. Bei der Regenerierung sollen die VOC möglichst vollständig desorbiert werden und mit einer geringen Gasmenge in einer katalytischen Verbrennung zu CO2 und H2O umgewandelt werden. Die Wirtschaftlichkeit der Luftreinigung wird wesentlich bestimmt durch die Sorptionskapazität des Adsorbens, die erforderliche Energie für die thermische Regenerierung und die Menge des Spülgases bei der Regenerierung. In dieser Arbeit wird der Einsatz von Typ X-Zeolithpulver in der Luftreinigung einer Lackiererei beschrieben und dessen Regenerierung im Labor mittels DTA/TG und Isothermenmessung der Schlüsselkomponenten untersucht. Ferner wurde die Regenerierung des beladenen Zeoliths in einem Labor-Drehrohrofen unter Variation der Betriebsparameter untersucht und anschließend mit ausgewählten Parametern in einem kleintechnischen Drehrohrofen durchgeführt. Die Verfahrensvarianten werden diskutiert. KW - Adsorption KW - Verfahrensentwicklung KW - VOC KW - Zeolithe PY - 2007 SN - 0009-286X SN - 1522-2640 VL - 79 IS - 6 SP - 883 EP - 889 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-14975 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -