TY - GEN A1 - Brandes, Klaus A1 - Daum, Werner A1 - Buchhardt, Frank ED - Paulo J.S. Cruz, ED - Dan M. Frangopol, ED - Luis C. Neves, T1 - Long-term monitoring of concrete bridges by direct combination of experimental and mechanical analysis T2 - 3. International Conference on Bridge Maintenance, Safety and Management "Bridge Maintenance, Safety, Management, Life-Cycle Performance and Cost", IABMAS `06 CY - Porto, Portugal DA - 2006-07-16 PY - 2006 SN - 978-0-415-40315-3 SP - 1 EP - 8 PB - Taylor & Francis CY - Leiden, The Netherlands AN - OPUS4-16395 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Appajaiah, Anilkumar A1 - Wachtendorf, Volker A1 - Daum, Werner T1 - Characterization of thermo-oxidative stability of polymer optical fibers using chemiluminescence technique N2 - The thermo-oxidative stability of commercially available polymer optical fibers (POFs) and their components (cores and claddings) was investigated. All the bare POFs (core and cladding only) studied here were based on poly(methyl methacrylate) (PMMA) core. The fibers were exposed to 100 °C/low humidity for about 4200 h. Chemiluminescence (CL) technique was applied to investigate the thermo-oxidative stability and for measuring the transmission loss during exposure a prototype device called multiplexer was used. POFs exhibited variation in thermo-oxidative stability although they possessed identical core material PMMA. This was due to difference in the chemical compositions of claddings. Claddings were more susceptible to the thermo-oxidative degradation compared to cores. The thermo-oxidative degradation of both the cladding and the core was found in POFs as a result of climatic exposure. POFs showed an early drop-off followed by a slow decline of transmission. The early drop-off of transmission was attributed to physical changes like thermal expansion and the slow decline of transmission to chemical changes like oxidative degradation of POFs. A good linear relationship between optical transmission stability and thermo-oxidative stability of POFs was established from these studies. KW - Polymer optical fibers (POFs) KW - Chemiluminescence (CL) KW - Thermo-oxidative stability KW - Aging KW - Optical transmission stability PY - 2006 DO - https://doi.org/10.1016/j.polymdegradstab.2006.05.006 SN - 0141-3910 SN - 1873-2321 VL - 91 IS - 11 SP - 2605 EP - 2613 PB - Applied Science Publ. CY - London AN - OPUS4-13984 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Daum, Werner ED - Czichos, Horst ED - Tetsuya Saito, ED - Leslie Smith, T1 - Structural Health Monitoring - Embedded Sensors KW - Measurement Methods for Composition and Structure KW - Measurement Methods for Material Properties KW - Measurement Methods for Material Performance, Modelling and Simulation Methods PY - 2006 SN - 978-3-540-20785-6 IS - Part D / 16.6 SP - 875 EP - 890 PB - Springer CY - Berlin AN - OPUS4-13985 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Daum, Werner T1 - Ergebnisunsicherheit im Prüfwesen- Eine Einführung in Systematik und praktische Vorgehensweisen T2 - 23. DVM-Vortrags- und Diskussionstagung Werkstoffprüfung 2005 CY - Berlin, Germany DA - 2005-12-01 PY - 2005 AN - OPUS4-11604 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Daum, Werner T1 - Ergebnisunsicherheit im Prüfwesen - eine Einführung in Systematik und praktische Vorgehensweisen T2 - DVM-Tagung Werkstoffprüfung 2005 CY - Berlin, Deutschland DA - 2005-12-01 KW - Measurement uncertainty KW - Result uncertainty KW - Quantitative test result KW - Qualitative test result KW - Determination procedure PY - 2005 SN - 1861-8154 N1 - Serientitel: DVM-Bericht – Series title: DVM-Bericht IS - 641 SP - 51 EP - 62 PB - DVS-Verl. CY - Berlin AN - OPUS4-11629 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Brandes, K. A1 - Daum, Werner A1 - Buchhardt, Frank T1 - Methodische Symbiose von Messung und mechanischer Analyse beim Langzeit-Monitoring von Spannbetonbrücken T2 - GESA Symposium 2005 CY - Saarbrücken, Deutschland DA - 2005-09-21 KW - Langzeit-Monitoring KW - Modellgestützte Messverfahren KW - Vergleich von Modell und Messung KW - Lagrangesche Methode PY - 2005 SN - 3-18-091899-3 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1899 SP - 137 EP - 151 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-10995 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lebid, S. A1 - Habel, Wolfgang A1 - Daum, Werner T1 - How to reliably measure composite-embedded fibre Bragg grating sensors influenced by transverse and point-wise deformations? N2 - Embedded conventional fibre Bragg grating (FBG) sensors with acrylate coating have been chosen for monitoring novel textile-reinforced composite materials with a complicated wavy structure as a result of reinforcing textures. Problems of monitoring this type of material occur due to the harsh fabrication technology of the composite and its complicated structure. Embedded fibre sensors are exposed to the influence of transverse and point-wise deformations. To what extent will these effects influence the measurement signal of a sensor? Temperature cycles, tension and vibration tests were carried out to answer this question. Transverse and point-wise deformation and micromechanical indentation tests on non-embedded FBG sensors were carried out to clarify the reliability of recorded signals. KW - FBG sensors KW - Textile-reinforced composites KW - Measurement reliability PY - 2004 UR - http://www.iop.org/EJ/abstract/0957-0233/15/8/001/ DO - https://doi.org/10.1088/0957-0233/15/8/001 SN - 0957-0233 SN - 1361-6501 VL - 15 SP - 1441 EP - 1447 PB - IOP Publ. Ltd. CY - Bristol AN - OPUS4-3846 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Daum, Werner T1 - Aktuelle Entwicklungen und Verfahren zur Abschätzung der Ergebnisunsicherheit im Prüfwesen T2 - 2. VDI/VDE-GMA-Fachtagung "Messunsicherheit praxisgerecht bestimmen" CY - Oberhof, Germany DA - 2004-11-30 PY - 2004 AN - OPUS4-5806 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Daum, Werner ED - Koike, Y. T1 - Standards and Specifications for POF Characterisation T2 - 13th International Plastic Optical Fibres Conference 2004 CY - Nuremberg, Germany DA - 2004-09-27 KW - Plastic optical fibres KW - Standards KW - Specification KW - Testing KW - Characterisation PY - 2004 SN - 3-905084-70-8 SP - 133 EP - 139 PB - AKM Congress Service CY - Basel AN - OPUS4-5231 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lebid, Solomija A1 - Habel, Wolfgang A1 - Daum, Werner T1 - How reliable measure composite-embedded FBG sensors under the influence of transverse and point-wise deformations? T2 - 16th International Conference on Optical Fiber Sensors (OFS-16) CY - Nara, Japan DA - 2003-10-13 PY - 2003 SN - 4-89114-036-4 SP - 46 EP - 49 PB - IEICE CY - T¯oky¯o AN - OPUS4-2887 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -