TY - JOUR A1 - Stark, Wolfgang A1 - Döring, Joachim A1 - Walentowski, Heinz-Ulrich T1 - Crosslinking Instead of Glassy Transition N2 - In processing fibre-reinforced composites, the curing reaction can be significantly retarded if the temperature and reaction time are not optimally set. In such situations, complete curing is sometimes impossible under practically relevant conditions. It is difficult for processors to recognize or detect incomplete curing. The equilibrium glass transition temperature plays an important role in complete curing in the production process. PY - 2000 SN - 0945-0084 VL - 90 IS - 4 SP - 33 EP - 35 PB - Hanser CY - München AN - OPUS4-822 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stark, Wolfgang A1 - Döring, Joachim A1 - Walentowski, Heinz-Ulrich T1 - Vernetzen statt Verglasen PY - 2000 UR - http://www.kunststoffe.de/ku/default.asp SN - 0023-5563 VL - 90 IS - 4 SP - 90 EP - 92 PB - Hanser CY - München AN - OPUS4-823 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Döring, Joachim A1 - Mc Hugh, Jarlath A1 - Schmachtenberg, E. A1 - Töpker, J. T1 - RTM Process optimization using incorporated ultrasonic sensors T2 - 5. Internationale AVK-TV Tagung für Verstärkte Kunststoffe und Duroplastische Formmassen ; 5th International AVK-TV Conference on Reinforced Plastics and Thermoset Moulding Compounds CY - Baden-Baden, Germany DA - 2002-09-17 PY - 2002 SP - B10-1-B10-10 CY - Frankfurt am Main AN - OPUS4-1853 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stark, Wolfgang A1 - Döring, Joachim A1 - Kelm, Jürgen A1 - Fritsch, Sebastian T1 - Kontrolle der Kautschukvulkanisation im Werkzeug mit Ultraschall N2 - Zusammenfassung In diesem Beitrag wird zunächst die für die on-line Prozesskontrolle an duroplastischen Formmassen entwickelte Ultraschallmesstechnik vorgestellt. Die Methode basiert auf der Durchschallung des vernetzenden Materials mit Hilfe von in das Werkzeug integrierten druck- und temperaturfesten 4 MHz-Ultraschallsensoren. Die Auswertung von Schalllaufzeit und Signalamplitude erfolgt vollautomatisch und dient der Berechnung von Schallgeschwindigkeit und -dämpfung. Beide Größen repräsentieren die änderung der mechanischen Eigenschaften infolge der Vernetzungsreaktion. Durch Anwendung auf vulkanisierende Materialien sollte die Anwendbarkeit der bewährten Methode erweitert werden. Im Ergebnis wird gezeigt, dass die Größe des Messeffekts von der Menge an Vernetzer (Schwefelkonzentration) abhängt. Bei ausreichend hohem Vernetzungsgrad zeigt die Ultraschallgeschwindigkeit signifikante, gut auswertbare Resultate, die den Ablauf der Vulkanisation on-line zu verfolgen gestatten. Ein Vergleich mit Vulkameterkurven zeigt große ähnlichkeiten und berechtigt zu der Hoffnung, dass die Methode industriellen Einsatz finden kann. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 KW - Prozesskontrolle KW - Vulkanisation KW - Vulkameter KW - Ultraschall KW - Schallgeschwindigkeit PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/p21/p21.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-1857 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Döring, Joachim A1 - Stark, Wolfgang A1 - Mc Hugh, Jarlath A1 - Bartusch, Jürgen T1 - Ultrasound on-line cure monitoring for industrial applications N2 - In recent years eure monitoring with ultrasonic methods became more important. An on-line measurement System for industrial applications is presented in this paper. It operates in through-transmission and the measured parameters are the sound velocity and the attenuation of the sound wave. An objective of this paper is to establish the ränge of possible applications for an ultrasonic eure monitoring System. KW - Ultrasonic monitoring KW - Cure process KW - Composite material KW - Process controlling PY - 2000 SN - 0963-6935 PB - Woodhead Publ. CY - Cambridge AN - OPUS4-1061 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stark, Wolfgang A1 - Döring, Joachim A1 - Kelm, Jürgen T1 - Ultraschall on-line Prozesskontrolle bei der Vulkanisation KW - Prozesskontrolle KW - Vulkanisation KW - Ultraschall KW - Sensoren KW - Schubmodul KW - Verlustmodul PY - 2000 SN - 0948-3276 SN - 0022-9520 SP - 9 Seiten PB - Hüthig CY - Heidelberg AN - OPUS4-997 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stark, Wolfgang A1 - Döring, Joachim A1 - Goering, Harald A1 - Knappe, S. A1 - Mc Hugh, Jarlath A1 - Opfermann, J. T1 - Der RTM-Prozess und die Probleme von Gelierung, Verglasung und Aushärtegrad T2 - 6. Internationale AVK-TV Tagung für Verstärkte Kunststoffe und Duroplastische Formmassen ; 6th International AVK-TV Conference for Reinforced Plastics and Thermoset Moulding Compounds CY - Baden-Baden, Deutschland DA - 2003-10-07 KW - Epxidharz KW - Compositbauteil KW - Vernetzungsreaktion PY - 2003 VL - 6 SP - C14-1-C14-16 PB - AVK-TV CY - Frankfurt am Main AN - OPUS4-3034 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Fengler, Petra A1 - Stark, Wolfgang A1 - Döring, Joachim A1 - Mc Hugh, Jarlath T1 - Coupling of hidden ultrasound sensors to a moulding tool N2 - Ultrasound on-line NDT methods have been demonstrated as a useful tool for monitoring the curing reaction of thermosets. In order to achieve this ultrasound sensors are incorporated into compression, injection and RTM (resin transfer) mould. For many commercial products imprints or any surface markings upon the moulded product are undesirable. Due to its physical properties ultrasound has a large advantage over other techniques for similar applications. The sound wave can pass through the wall of the mould and direct contact with the moulded part is not required. In this particular case one fundamental problem is a good coupling of the sensors to the mould wall. Several mediums came into question but because of the high technical (e. g. temperature and long time stability) and practical demands, it was decided that dry (non-fluid) coupling would be the most promising candidate. A handful of coupling foils suitable also at high temperatures and for long time application under industrial conditions were tested and are presented in this paper. KW - Sensors KW - Ultrasound KW - Mould wall coupling KW - Thermoset manufacturing PY - 2004 UR - http://www.ndt.net/article/v09n03/stark/stark.htm SN - 1435-4934 VL - 9 IS - 3 SP - 1 EP - 10 PB - NDT.net CY - Kirchwald AN - OPUS4-3316 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Döring, Joachim A1 - Stark, Wolfgang T1 - Ultrasonic Production Control N2 - Ultrasound waves penetrate solid objects without damaging them. Their fields of application range from the imaging of internal organs in medicine, to interior testing of mechanical and chemical engineering components. However, ultrasonic systems can also be used to visualise the way the mechanical properties of reactive resins change during processing in the mould. PY - 2001 SN - 0945-0084 VL - 91 IS - 1 SP - 35 EP - 36 PB - Hanser CY - München AN - OPUS4-2135 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Döring, Joachim A1 - Stark, Wolfgang A1 - Bartusch, Jürgen A1 - Mc Hugh, Jarlath T1 - Contribution to ultrasound cure control for composite manufacturing N2 - The curing conditions play an important role in the quality assurance of composite products. Especially as composite materials are widely used in high tech areas so that they are required to fulfil high quality Standards. Some problems which occur during curing, for instance undercuring, can hardly be detected using Standard NDT investigations, mainly because they are manifested only at high temperatures, particularly close to glass-rubber-transition. On-line eure monitoring has the outstanding advantage that it can monitor the material parameters even at the highest temperatures possible. In recent years eure monitoring with ultrasonic methods has become more populär. In comparison to dielectric methods mechanical parameters are measured directly. The quantities to be measured are the velocity and the attenuation of the sound wave. On this basis the storage and loss modulus can be calculated. Depending on the form of excitation with longitudinal or transversal waves these moduli are referred to as long wave or shear modulus. Well developed Computer based technology and sensor materials are available in the non-destructive testing (NDT) market. The measuring equipment employed a commercial NDT System, which worked computer-aided. With a special Software the demands of automatic Operation under industrial conditions was accomplished. This measurement equipment was tested on composites. Its structure, performance and some practical results will be presented in the following paper. T2 - 15th World Conference on Non-Destructive Testing (WCNDT) CY - Roma, Italy DA - 15.10.2000 PY - 2000 UR - http://www.ndt.net/article/wcndt00/papers/idn482/idn482.htm SN - 1435-4934 VL - 5 IS - 11 PB - NDT.net CY - Kirchwald AN - OPUS4-2136 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Döring, Joachim A1 - Stark, Wolfgang T1 - Produktionskontrolle mit Ultraschall N2 - Ultraschallwellen durchdringen Festkörper, ohne sie zu schädigen. Der Einsatzbereich von Ultraschall reicht von der Darstellung der inneren Organe in der Medizin bis zur Prüfung des Inneren von Bauteilen im Maschinen- und Anlagenbau. Ultraschall-Systeme können jedoch auch genutzt werden, um sichtbar zu machen, wie sich mechanische Eigenschaften von Reaktionsharzen während ihrer Verarbeitung im Werkzeug verändern. PY - 2001 UR - http://www.kunststoffe.de/directlink.asp?KU101838 SN - 0023-5563 VL - 91 IS - 1 SP - 83 EP - 85 PB - Hanser CY - München AN - OPUS4-2137 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Döring, Joachim A1 - Bartusch, Jürgen A1 - Mc Hugh, Jarlath A1 - Stark, Wolfgang A1 - Kürten, C. T1 - Mit Ultraschall sieht man mehr - Kontrolle von Werkzeugfüllung und Vernetzungsreaktion beim Harzinjektionsverfahren RTM T2 - Poster-Ausstellung "Sensorik in der BAM" CY - Berlin, BAM, Deutschland DA - 2002-10-01 PY - 2002 SP - 1(?) AN - OPUS4-2114 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Döring, Joachim A1 - Stark, Wolfgang A1 - Mc Hugh, Jarlath A1 - Bartusch, Jürgen A1 - Fengler, Petra T1 - Rheologische und akustische Bestimmung der Fließ-Härtungseigenschaften von Injektionsharzen N2 - Zusammenfassung Der Ausgangspunkt für diese Arbeiten ist eine in [1] beschriebene Ultraschall-(US)-Sensorik zur Aushärtungskontrolle. Sie wurde für rieselfähige Formmassen entwickelt [2,3]. Darauf aufbauend ist es das Ziel der vorliegenden Arbeit, die Voraussetzungen für den Einsatz dieser Sensorik beim Harzinjektionsverfahren zu schaffen und ihre Kalibrierung durch rheologische und DSC-Messungen zu ermöglichen. Der erste Teil des Beitrages beschäftigt sich mit dem technologischen Ablauf des Harzinjektionsverfahren und den Einsatzmöglichkeiten der US-Sensorik bei dieser Technologie. Ergebnisse von Schallgeschwindigkeits- und Dämpfungsmessungen für EP-Harze werden vorgestellt. Im zweiten Teil wird auf das Kalibrieren der US-Sensorik für den Verarbeiter eingegangen. Es kann mittels der bisherigen Prozessführung oder durch Vergleich mit den Ergebnissen anderer Mess-Verfahren wie Rheometer- oder Differential-Scanning-Calerometry-(DSC)-Messungen erfolgen. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 KW - Ultraschall KW - Harzinjektionsverfahren KW - RTM KW - Prozesskontrolle KW - Aushärtung PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/v51/v51.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-1913 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stark, Wolfgang A1 - Döring, Joachim A1 - Kelm, Jürgen A1 - Fritsch, Sebastian ED - Green, R. E. ED - Djordjevic, B. B. ED - Hentschel, M. P. T1 - Rubber processing monitored by ultrasound T2 - 11th International Symposium on Nondestructive Characterization of Materials CY - Berlin, Germany DA - 2002-06-24 PY - 2003 SN - 3-540-40154-7 SP - 659 EP - 664 PB - Springer CY - Berlin AN - OPUS4-2769 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mc Hugh, Jarlath A1 - Stark, Wolfgang A1 - Döring, Joachim ED - Green, R. E. ED - Djordjevic, B. B. ED - Hentschel, M. P. T1 - Evaluation of the cure behaviour of epoxy resin using rheometric and ultrasonic techniques T2 - 11th International Symposium on Nondestructive Characterization of Materials CY - Berlin, Germany DA - 2002-06-24 PY - 2003 SN - 3-540-40154-7 SP - 651 EP - 658 PB - Springer CY - Berlin AN - OPUS4-2772 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Döring, Joachim T1 - Grundlagen zur Charakterisierung von Harzsystemen und deren Verarbeitungsprozessen mit Ultraschall T2 - IKV-Seminar, Innovative Prozessentwicklung in der Produktion endlosfaserverstärkter Kunststoffe CY - Aachen, Germany DA - 2005-06-28 PY - 2005 AN - OPUS4-7605 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Döring, Joachim T1 - Grundlagen zur Charakterisierung von Harzsystemen und deren Verarbeitungsprozessen mittels Ultraschall T2 - IKV-Seminar "Innovative Prozessentwicklungen in der Produktion endlosfaserverstärkter Kunststoffe CY - Aachen, Deutschland DA - 2005-06-28 PY - 2005 SP - 17 Seiten PB - RWTH Aachen CY - Aachen AN - OPUS4-7624 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beckmann, Jörg A1 - Döring, Joachim A1 - Bartusch, Jürgen A1 - Zscherpel, Uwe A1 - Ewert, Uwe A1 - Erhard, Anton T1 - Time Domain Spectroscopy Techniques for Non Destructive Contact less Flaw Detection and Imaging in Advanced Materials T2 - 9th European Conference on NDT CY - Berlin, Germany DA - 2006-09-25 KW - Time domain spectroscopy KW - Air coupled ultrasound KW - Pulsed THz radiation system KW - Pulse compression KW - THz imaging PY - 2006 SN - 3-931381-86-2 SP - 1(?) EP - 8(?) PB - European Federation for Non-Destructive Testing CY - Berlin AN - OPUS4-13874 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Döring, Joachim A1 - Stark, Wolfgang T1 - Überwachung des Harzinjektionsverfahrens mit Ultraschall-Sensoren bei der Produktion von LKW-Hochdächern T2 - Kolloquium der Abteilung VI CY - Berlin, Germany DA - 2003-02-13 PY - 2003 AN - OPUS4-4553 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Döring, Joachim A1 - Bartusch, Jürgen A1 - Gaal, Mate A1 - Erhard, Anton A1 - Bovtun, Viktor Petrovic A1 - Yakymenko, Y. T1 - High Voltage Excitation of Ferroelectret Ultrasonic Transducers: Advantages and Limitations T2 - EMF 2011 European Meeting on Ferroelectricity CY - Bordeaux, France DA - 2011-06-26 PY - 2011 AN - OPUS4-26213 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bovtun, Viktor Petrovic A1 - Döring, Joachim A1 - Bartusch, Jürgen A1 - Gaal, Mate A1 - Erhard, Anton A1 - Kreutzbruck, Marc A1 - Yakymenko, Y. T1 - Enhanced electromechanical response of ferroelectret ultrasonic transducers under high voltage excitation N2 - Polypropylene based ferroelectret films exhibit a strong electromechanical activity and provide a promising solution for the air coupled ultrasonic (ACUS) transducers. Ultrasonic transmission between two air coupled ferroelectret transducers in dependence on the amplitude and polarity of the high voltage exciting pulse revealed a strongly non-linear electromechanical response of the ferroelectret transmitter which provides an increase in the transmitter efficiency. The authors present a simple model describing both promotion and competition of the piezoelectric and electrostriction contributions, as well as increase in the transducer constant under high voltage excitation. Enlargement of the inverse transducer constant of the polypropylene ferroelectret film by a factor of 4 was demonstrated. The non-linear properties of the polypropylene ferroelectrets result in a strong increase in their ACUS figure of merit under the high voltage excitation, which exceeds the results of their technological optimisation. Consequently, enhancement of the ACUS system transmission by 12 dB and signal to noise ratio by 32 dB was achieved. KW - Air coupled ultrasonics KW - Non-contact transducers KW - Ferroelectrets KW - Piezoelectric effect KW - Electrostriction KW - Cellular polypropylene KW - Ultrasonic transducer PY - 2013 U6 - https://doi.org/10.1179/1743676112Y.0000000021 SN - 1743-6753 SN - 1743-6761 VL - 112 IS - 2 SP - 97 EP - 102 PB - Maney CY - London AN - OPUS4-27880 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gaal, Mate A1 - Döring, Joachim A1 - Bartusch, Jürgen A1 - Lange, Thorid A1 - Hillger, W. A1 - Brekow, Gerhard A1 - Kreutzbruck, Marc T1 - Ferroelectret transducers for air-coupled ultrasonic testing of fiber-reinforced polymers N2 - Ferroelectrets are promising materials for air-coupled ultrasonic transducers. A transducer made of polarized cellular polypropylene, including its electronic interface, was developed and compared with conventional air-coupled probes. Test pieces of fiber-reinforced polymer containing impact flaws and flat-bottom holes were inspected in transmission. The ferroelectret transducers achieved a considerably higher signal-to-noise ratio. The impacts were clearly visible with all transducers, but less noisy with ferroelectret transducers. The flat-bottom holes were better detectable than with a conventional probe with about the same focus size. T2 - 39th Annual review of progress in quantitative nondestructive evaluation CY - Denver, Colorado, USA DA - 2012-07-15 KW - Air-coupled ultrasound KW - Transducer KW - Ferroelectret PY - 2013 SN - 978-0-7354-1129-6 U6 - https://doi.org/10.1063/1.4789224 SN - 0094-243X SN - 1551-7616 N1 - Serientitel: AIP conference proceedings – Series title: AIP conference proceedings VL - 1511 SP - 1534 EP - 1540 AN - OPUS4-27747 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Döring, Joachim A1 - Bartusch, Jürgen A1 - Brekow, Gerhard A1 - Kreutzbruck, Marc A1 - Hillger, W. A1 - Bovtun, V. T1 - Luftultraschall-Prüfköpfe mit 3kV-Impuls-Ansteuerung T2 - DGZfP-Jahrestagung 2011 CY - Bremen, Germany DA - 2011-05-30 PY - 2011 AN - OPUS4-26224 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Döring, Joachim A1 - Bartusch, Jürgen A1 - Gaal, Mate A1 - Kreutzbruck, Marc A1 - Erhard, Anton A1 - Bovtun, Viktor Petrovic T1 - Ferroelektret-Prüfköpfe für die zerstörungsfreie Prüfung mit Luftultraschall N2 - Für die luftgekoppelte Ultraschall-Prüfung wird der Prototyp eines neuartigen Prüfkopfes vorgestellt. Statt eines piezokeramischen Ultraschall-Wandlers mit einer λ/4-Anpassschicht wird eine Ferroelektret-Folie aus schaumförmigem Polypropylen eingesetzt. Durch die außerordentlich geringe akustische Impedanz der Folie reduzieren sich die Reflexionsverluste an den Grenzschichten zur Luft so stark, dass bei diesem Prüfkopf auf eine λ/4-Anpassschicht verzichtet werden kann. Außerdem ist die Folie hochspannungsfest. Sie konnte mit Spannungen von mehr als 3500 V angesteuert werden und erlaubte eine Vorspannung am Ultraschall-Wandler des Empfangsprüfkopfes von 2000 V. Mithilfe der hohen Anregungsspannung stieg die Amplitude des akustischen Prüfimpulses auf das 11,2-Fache. Die Empfindlichkeit des Empfängers erhöhte sich durch die Vorspannung weiter um den Faktor 4,3. Insgesamt steigt die Amplitude am Empfänger also auf das 48-Fache, bei gleichbleibendem Rauschpegel. Ein abschließender Vergleich mit kommerziellen Luftultraschall-Prüfköpfen belegt die Überlegenheit der Folien-Prüfköpfe. Damit rückt der Einsatz einer vollwertigen Impuls-Echo-Technik auch bei der luftgekoppelten Ultraschallprüfung deutlich näher. KW - Prüfkopf KW - Ferroelektret KW - Luftultraschall KW - Zerstörungsfreie Prüfung PY - 2013 SN - 0025-5300 VL - 55 IS - 2 SP - 96 EP - 102 PB - Hanser CY - München AN - OPUS4-27778 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mc Hugh, Jarlath A1 - Döring, Joachim A1 - Erhard, Anton A1 - Stark, Wolfgang A1 - Raab, S. T1 - Einfluss hoher Temperaturen und Drücke auf die Ultraschalleigenschaften eines Komposit-Prüfkopfes T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2004 CY - Salzburg, Österreich DA - 2004-05-17 PY - 2004 UR - http://www.ndt.net/article/dgzfp04/papers/p12/p12.htm SN - 3-931381-55-2 SP - 1 EP - 7(?) PB - DGZfP CY - Berlin AN - OPUS4-5214 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mc Hugh, Jarlath A1 - Döring, Joachim A1 - Stark, Wolfgang A1 - Erhard, Anton T1 - Characterisation of epoxy materials used in the development of ultrasound arrays T2 - 16th World Conference on Nondestructive Testing CY - Montreal, Canada DA - 2004-08-30 PY - 2004 UR - http://www.ndt.net/article/wcndt2004/pdf/materials_characterization/616_mchugh.pdf SP - 8 pages PB - International Committee for Non-Destructive Testing CY - Montreal AN - OPUS4-5215 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Döring, Joachim A1 - Stark, Wolfgang A1 - Bartusch, Jürgen A1 - Mc Hugh, Jarlath A1 - Simon, W. T1 - Ultraschall-Prozesskontrolle mechanischer Parameter von aushärtenden Polymeren - Inline-Sensorik für die Herstellung von Kunststoffkomponenten KW - Aushärtung KW - Ultraschall KW - Sensoren KW - Materialparameter PY - 2007 SN - 0025-5300 VL - 49 IS - 5 SP - 238 EP - 242 PB - Hanser CY - München AN - OPUS4-14976 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bovtun, V. A1 - Döring, Joachim A1 - Bartusch, Jürgen A1 - Beck, Uwe A1 - Erhard, Anton A1 - Yakymenko, Y. T1 - Air-coupled ultrasonic transducers based on cellular polypropylene ferroelectret films N2 - Analysis of the dielectric and electromechanical properties of the cellular polypropylene ferroelectret films (EMFIT) evidences their high potential for the application in the air-coupled ultrasonic transducers. Simple prototype transducers, based on the EMFIT films, were developed and their high sensitivity was proved in the air-coupled ultrasonic experiment. Amplitude and delay time scanned images of the polyethylene step wedge with holes, obtained in both pulse-echo and transmission modes, demonstrate that non-contact ultrasonic imaging with EMFIT transducers is possible. KW - Air-coupled ultrasonics KW - Non-contact transducers KW - Ferroelectrets KW - Electromechanical properties PY - 2007 SN - 0015-0193 SN - 1563-5112 VL - 353 IS - 1 SP - 186 EP - 192 PB - Taylor & Francis CY - New York, NY AN - OPUS4-14977 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Döring, Joachim A1 - Bartusch, Jürgen A1 - Kreutzbruck, Marc T1 - Luft-Ultraschall-Sensoren zum Nachweis nichtmetallischer Gegenstände in Textilien T2 - Sensor und Test CY - Nuremberg, Germany DA - 2008-05-06 PY - 2008 AN - OPUS4-17441 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Döring, Joachim A1 - Bartusch, Jürgen A1 - Kreutzbruck, Marc T1 - Durchschallung von Textilien zum Nachweis verdeckter nichtmetallischer Gegenstände T2 - DACH-Jahrestagung 2008 CY - St. Gallen, Switzerland DA - 2008-04-28 PY - 2008 AN - OPUS4-17442 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Döring, Joachim A1 - Bovtun, V. A1 - Bartusch, Jürgen A1 - Beck, Uwe A1 - Kreutzbruck, Marc T1 - Cellular polypropylene ferroelectret film: piezoelectric material for non-contact ultrasonic transducers T2 - 17th World Conference on Non-Destructive Testing CY - Shanghai, China DA - 2008-10-25 KW - Air-coupled ultrasound KW - Ultrasonic transducers KW - Electromechanical properties KW - Piezoelectric materials KW - Impedance spectroscopy PY - 2008 IS - Paper 123 SP - 1 EP - 6 PB - International Committee for Non-Destructive Testing CY - Shanghai AN - OPUS4-18435 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Straet, T. A1 - Bayerl, H. A1 - Stark, Wolfgang A1 - Döring, Joachim A1 - Kürten, Ch. T1 - Ultrasonic Measurements on Thermoset Moulding Compounds KW - Ultraschall KW - Fertigungskontrolle KW - Schallgeschwindigkeit KW - Vernetzungsreaktion KW - Qualitätssicherung PY - 2005 SN - 0945-0084 VL - 95 IS - 7 SP - 1 EP - 5 PB - Hanser CY - München AN - OPUS4-10304 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bovtun, Viktor Petrovic A1 - Döring, Joachim A1 - Bartusch, Jürgen A1 - Beck, Uwe A1 - Erhard, Anton A1 - Yakymenko, Y. T1 - Ferroelectret non-contact ultrasonic transducers N2 - Dielectric and electromechanical properties of the cellular polypropylene ferroelectret films (EMFIT), combining strong piezoelectric response with a low density and softness, evidence their high potential for the air-coupled ultrasonic applications. The disadvantage of the low coupling factor is compensated by the extremely low acoustic impedance, which provides excellent matching to air and promises efficient sound transmission through the air–transducer interface. The influence of the electrodes on the electromechanical properties was investigated. Electron beam evaporation technology was adapted to the EMFIT films, and films with both-sided Au and Al electrodes were prepared without reducing or suppressing of the electromechanical properties. Finally, prototype transducers based on the EMFIT films were developed. In spite of the simple construction and absence of matching layers, high sensitivity of the EMFIT transducers was proved in the air-coupled ultrasonic experiment. Amplitude and delay time scanned images of the polyethylene step wedge with holes, obtained in both pulse-echo and transmission modes, demonstrate that non-contact ultrasonic imaging and testing with EMFIT transducers is possible. KW - Piezoelectric film KW - Air borne transducer KW - Non-destructive testing PY - 2007 SN - 0947-8396 VL - 88 IS - 4 SP - 737 EP - 743 PB - Springer CY - Berlin AN - OPUS4-15074 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stark, Wolfgang A1 - Döring, Joachim A1 - Kürten, C. T1 - Vernetzung reaktiver Kunststoffe mit Ultraschall überwachen KW - Elastomer KW - Epoxidharz KW - Phenolharz KW - Vernetzung KW - Vulkanisation KW - Schallgeschwindgkeit KW - Prozesskontrolle PY - 2008 SN - 0939-2629 SN - 0176-6058 IS - 2 SP - 31 EP - 33 PB - Holzverl. CY - Kissing AN - OPUS4-17587 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mc Hugh, Jarlath A1 - Döring, Joachim A1 - Stark, Wolfgang A1 - Guey, J. L. T1 - Relationship between the Mechanical and Ultrasound Properties of Polymer Materials T2 - 9th European Conference on NDT CY - Berlin, Germany DA - 2006-09-25 KW - Ultrasound KW - DMA KW - Epoxy KW - Modulus KW - tan delta KW - High temperature PY - 2006 SN - 3-931381-86-2 SP - 1(?) EP - 9(?) PB - European Federation for Non-Destructive Testing CY - Berlin AN - OPUS4-14065 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bovtun, Viktor Petrovic A1 - Döring, Joachim A1 - Bartusch, Jürgen A1 - Beck, Uwe A1 - Erhard, Anton A1 - Yakimenko, Y. T1 - EMFIT Ferroelectret Film Transducers for Non-Contact Ultrasonic Testing T2 - 9th European Conference on NDT CY - Berlin, Germany DA - 2006-09-25 KW - Non-contact ultrasound KW - Ferroelectret film KW - Ultrasonic transducer PY - 2006 SN - 3-931381-86-2 SP - 1 EP - 10(?) PB - European Federation for Non-Destructive Testing CY - Berlin AN - OPUS4-14211 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Döring, Joachim A1 - Bovtun, V. A1 - Bartusch, Jürgen A1 - Beck, Uwe A1 - Yakymenko, Y. T1 - Cellular polypropylene ferroelectret Piezoelectrics for the air-coupled Ultrasonics T2 - Euromat 2007 CY - Nuremberg, Germany DA - 2007-09-10 PY - 2007 AN - OPUS4-15757 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Döring, Joachim A1 - Stark, Wolfgang A1 - Bartusch, Jürgen A1 - Hoster, B. T1 - Einsatz der Ultraschall-Sensorik bei der Verarbeitung reaktiver Kunsstoffe T2 - 7. internationale AVK-TV-Tagung CY - Baden-Baden, Germany DA - 2004-09-28 PY - 2004 AN - OPUS4-4893 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Döring, Joachim A1 - Bartusch, Jürgen A1 - Erhard, Anton A1 - Bovtun, V. T1 - Eigenschaften von Polypropylen- und PVDF-Folien für Luftschall-Anwendungen T2 - DACH-Jahrestagung 2004: ZfP in Forschung, Entwicklung und Anwendung CY - Salzburg, Austria DA - 2004-05-17 PY - 2004 AN - OPUS4-4895 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mc Hugh, Jarlath A1 - Döring, Joachim A1 - Bartusch, Jürgen A1 - Stark, Wolfgang T1 - Making Cure Visible T2 - Aerospace Testing Expo 2005 - Europe, April 5-7, 2005, Hamburg CY - Hamburg, Deutschland DA - 2005-04-05 PY - 2005 SP - 4 pages PB - UKIP Media & Events CY - Dorking AN - OPUS4-7379 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stark, Wolfgang A1 - Bartusch, Jürgen A1 - Döring, Joachim A1 - Mc Hugh, Jarlath T1 - Making cure visible: monitoring the crosslinking process using integrated ultrasound sensors N2 - A special ultrasonic measuring system was developed to monitor the cross-linking process, enabling interaction with the manufacturing process in order to optimise part quality and reduce cycle times. KW - Thermoset KW - Ultrasound sensors KW - Mould KW - Rtm KW - Gelation KW - Vitrification PY - 2008 SN - 1639-965X IS - 38 SP - 64 EP - 66 PB - JEC CY - Paris AN - OPUS4-18610 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Döring, Joachim A1 - Bartusch, Jürgen A1 - Kreutzbruck, Marc T1 - Durchschallung von Textilien zum Nachweis verdeckter, nichtmetallischer Gegenstände T2 - DACH-Jahrestagung 2008 - Zerstörungsfreie Materialprüfung, ZfP in Forschung, Entwicklung und Anwendung CY - St. Gallen, Schweiz DA - 2008-04-28 PY - 2008 SN - 978-3-940283-09-2 IS - (Poster 48) SP - 1 EP - 8 AN - OPUS4-18789 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Döring, Joachim A1 - Bartusch, Jürgen A1 - Kreutzbruck, Marc T1 - Spektroskopische Untersuchungen an Polypropylen-Schaumfolie mit Luftultraschall T2 - DGZfP-Jahrestagung 2009 CY - Münster, Deutschland DA - 2009-05-18 PY - 2009 SN - 978-3-940283-16-0 IS - DGZfP-BB 115 (Poster 39) SP - 1 EP - 2 AN - OPUS4-20509 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Döring, Joachim A1 - Bartusch, Jürgen A1 - Kreutzbruck, Marc A1 - Bovtun, Viktor Petrovic A1 - Beck, Uwe T1 - Cellular Polypropylene Ferroelectret Film: Piezoelectric Material for Non-Contact Ultrasonic Transducers T2 - 5th International Workshop on NDT in Progress CY - Prague, Czech Republic DA - 2009-10-12 PY - 2009 AN - OPUS4-20437 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Döring, Joachim A1 - Bovtun, Viktor Petrovic A1 - Bartusch, Jürgen A1 - Erhard, Anton A1 - Kreutzbruck, Marc A1 - Yakymenko, Y. T1 - Nonlinear electromechanical properties of the polypropylene ferroelectrets T2 - Structual and ferroelectric phase transitions CY - Telc, Czech Republic DA - 2010-05-24 PY - 2010 AN - OPUS4-21632 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Döring, Joachim A1 - Bartusch, Jürgen A1 - Gaal, Mate A1 - Kreutzbruck, Marc T1 - Airborne Ultrasound Investigations of Cellulare Polypropylene Ferroelectret Film T2 - 10. European Federation for Non-Destructive Testing CY - Moscow, Russia DA - 2010-06-07 PY - 2010 AN - OPUS4-21643 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Döring, Joachim A1 - Bovtun, Viktor Petrovic A1 - Bartusch, Jürgen A1 - Erhard, Anton A1 - Kreutzbruck, Marc A1 - Yakymenko, Y. T1 - Nonlinear electromechanical response of the ferroelectret ultrasonic transducers N2 - The ultrasonic transmission between two air-coupled polypropylene (PP) ferroelectret (FE) transducers in dependence on the amplitude of the high-voltage exciting pulse revealed a strongly nonlinear electromechanical response of the FE transmitter. This phenomenon is described by a linear increase of the inverse electromechanical transducer constant t33(1) of the PP FE film with an increase of the exciting electrical pulse amplitude. Enlargement of t33(1) by a factor of 4 was achieved by application of 3500 V exciting pulses. The electrostriction contribution to t33(1) can be attributed to the electrostatic force between electrodes and the Maxwell stress effect. The nonlinear electromechanical properties of the PP FE result in a strong increase of its air-coupled ultrasonic (ACUS) figure of merit (FOM) under the high-voltage excitation, which exceeds results of the PP FE technological optimization. The FOM increase can be related to the increase of PP FE coupling factor and/or to the decrease of its acoustic impedance. A significant enhancement of the ACUS system transmission (12 dB) and signal-to-noise ratio (32 dB) was demonstrated by the increase of excitation voltage up to 3500 V. The nonlinear electromechanical properties of the PP FEs seem to be very important for their future applications. KW - Airborne ultrasonics KW - Electret film KW - Transducer KW - Nonlinearity PY - 2010 U6 - https://doi.org/10.1007/s00339-010-5752-7 SN - 0947-8396 VL - 100 IS - 2 SP - 479 EP - 485 PB - Springer CY - Berlin AN - OPUS4-21809 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bovtun, Viktor Petrovic A1 - Döring, Joachim A1 - Wegener, M. A1 - Bartusch, Jürgen A1 - Beck, Uwe A1 - Erhard, Anton A1 - Borisov, V. T1 - Air-coupled ultrasonic applications of ferroelectrets KW - Air-coupled ultrasonics KW - Non-contact transducers KW - Ferroelectrets KW - Electromechanical properties PY - 2008 U6 - https://doi.org/10.1080/00150190802380243 SN - 0015-0193 SN - 1563-5112 VL - 370 IS - 1 SP - 11 EP - 17 PB - Taylor & Francis CY - New York, NY AN - OPUS4-20924 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Döring, Joachim A1 - Bovtun, V. A1 - Gaal, Mate A1 - Bartusch, Jürgen A1 - Erhard, Anton A1 - Kreutzbruck, Marc A1 - Yakymenko, Y. T1 - Piezoelectric and electrostrictive effects in ferroelectret ultrasonic transducers N2 - Electromechanical response of polypropylene ferroelectret transducers under application of high-voltage pulses was measured by laser Doppler vibrometry and compared with results of ultrasonic through-air transmission between two ferroelectret transducers. The electromechanical response was completely explained by piezoelectric and electrostrictive effects. The electrostrictive effect dominates at high voltages and provides significant enlargement of the transducer constant, up to factor of 2.5. The induced strain of 1.7% was achieved at – 2000 V. The nonlinear ultrasonic transmission was shown to be well described by the piezoelectric and electrostrictive response of transmitter, except in the range of high negative exciting voltages where some limitation of the transmitted signal was observed. This limitation seems not to be a fundamental one and does not abolish the advantages of high-voltage excitation of polypropylene ferroelectret transducers. KW - Electromechanical effects KW - Ferroelectric devices KW - Piezoelectric transducers KW - Piezoelectricity KW - Ultrasonic transducers KW - Ultrasonic transmission KW - Cellular polypropylene KW - Ferroelectret KW - Electrostriction PY - 2012 U6 - https://doi.org/10.1063/1.4759052 SN - 0021-8979 SN - 1089-7550 VL - 112 IS - 8 SP - 084505-1 - 084505-6 PB - American Institute of Physics CY - Melville, NY AN - OPUS4-26806 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gaal, Mate A1 - Döring, Joachim A1 - Bartusch, Jürgen A1 - Brekow, Gerhard T1 - Einsatz von Luftultraschall-Sensoren mit geringer akustischer Impedanz T2 - DAGA 2010 - 36. Jahrestagung für Akustik CY - Berlin, Deutschland DA - 2010-03-15 KW - Luftultraschall KW - Sensor KW - Akustische Impedanz KW - Polypropylen PY - 2010 SN - 978-3-9808659-8-2 SP - 1041 EP - 1042 CY - Berlin AN - OPUS4-26402 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gaal, Mate A1 - Döring, Joachim A1 - Bartusch, Jürgen A1 - Bovtun, V. A1 - Brekow, Gerhard A1 - Kreutzbruck, Marc T1 - Charakterisierung der Wandler für Luftultraschallprüfung aus zellulärem Polypropylen-Ferroelektret N2 - In den letzten Jahren stieg die Anfrage für zerstörungsfreie Prüfung (ZIP) mit Luftultraschall deutlich. Die klassische ZfP mit Ultraschall nutzt Flüssigkeiten als Koppelmittel zwischen dem Wandler und dem Prüfkörper. Für die Prüfung von Gegenständen mit empfindlicher Oberfläche, die das Koppelmittel beschädigen oder verunreinigen kann, ist deswegen Luftultraschall besser geeignet. Eine mögliche Anwendung ist beispielsweise der Nachweis von Delaminationen in glas- und kohlefaserverstärkten Verbundwerkstoffen sowie Sandwichbauteilen, die in der Luftfahrt- und der Automobilindustrie eingesetzt werden. T2 - DAGA 2011 - 37. Jahrestagung für Akustik - Fortschritte der Akustik CY - Dusseldorf, Germany DA - 21.03.2011 KW - Luftultraschall KW - Wanderfolien KW - Zelluläres Polypropylen KW - Akustische Impedanz KW - Signal-Rausch-Anstand PY - 2011 SN - 978-3-939296-02-7 SP - 337 EP - 338 AN - OPUS4-26403 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gaal, Mate A1 - Döring, Joachim A1 - Bartusch, Jürgen A1 - Beck, Uwe A1 - Weise, Matthias A1 - Bovtun, Viktor Petrovic A1 - Brekow, Gerhard A1 - Kreutzbruck, Marc T1 - Parameter reproducibility of polypropylene ferroelectret transducers for air-coupled ultrasonic testing N2 - The extremely low acoustic impedance of polypropylene ferroelectret combined with its piezoelectric properties makes this material suitable for construction of aircoupled ultrasonic transducers for non-destructive testing. For the fabrication of transducers with a stable quality, the reproducibility of their key parameters is of interest. The reproducibility was evaluated by means of (i) impedance spectroscopy and (ii) pulse-echo measurements. (i) Impedance spectroscopy was applied to identify the resonance frequency, the coupling factor and the acoustic impedance of several nominally identical transducers. (ii) Pulse-echo measurements yielded the signal form of these transducers. The variation of the signal amplitude measured with pulseecho technique was about 10 dB. A part of this variation Comes from the deposition of transducer electrodes and another part from local variations of ferroelectret properties. The variation of the signal amplitude was caused by the observed variation of the coupling factor, which was also about 10 dB. The variation of the acoustic impedance was only about 1 dB, thus having no effect on the variation of the signal amplitude. These results indicate that the variability can be reduced by improving the control of electrode deposition and by optimizing the production technology affecting the reproducibility of material properties. T2 - 2011 IEEE International ultrasonics symposium (IUS) CY - Orlando, FL, USA DA - 18.10.2011 KW - Air-coupled ultrasonic transducers KW - Polypropylene ferroelectret KW - Reproducibility PY - 2011 IS - Abstract-ID 258 SP - 1 EP - 3 AN - OPUS4-26405 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gaal, Mate A1 - Döring, Joachim A1 - Bartusch, Jürgen A1 - Brekow, Gerhard T1 - Entwicklung von Luftschall-Sensoren mit geringer akustischer Impedanz T2 - Sensoren und Messsysteme 2010 - 15. ITG/GMA-Fachtagung CY - Nürnberg, Deutschland DA - 2010-05-18 KW - Luftultraschall KW - Sensor KW - Akustische Impedanz KW - Polypropylen PY - 2010 SN - 978-3-8007-3260-9 IS - A9/Paper 48 SP - 275 EP - 279 PB - VDE Verlag GmbH CY - Berlin, Offenbach AN - OPUS4-26407 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gaal, Mate A1 - Bartusch, Jürgen A1 - Döring, Joachim A1 - Dohse, Elmar A1 - Lange, Thorid A1 - Hillger, W. A1 - Kreutzbruck, Marc T1 - Air-coupled ferroelectret ultrasonic transducers applied to testing of fiber-reinforced polymers T2 - 12th International conference of the Slovenian society for non-destructive testing - Application of contemporary non-destructive testing in engineering CY - Portoroz, Slovenia DA - 2013-09-04 KW - Air-coupled ultrasound KW - Transducer KW - Ferroelectret KW - Cellular polypropylene KW - Fiber-reinforced polymers PY - 2013 SN - 978-961-93537-0-7 SP - 43 EP - 50 AN - OPUS4-29927 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Döring, Joachim A1 - Bovtun, Viktor Petrovic A1 - Bartusch, Jürgen A1 - Erhard, Anton T1 - Eigenschaften von Polypropylen- und PVDF-Folien für Luftschall-Anwendungen N2 - An Methoden zur luftgekoppelten Ultraschallprüfung wird seit einigen Jahren mit großer Intensität gearbeitet. Probleme bei der praktischen Realisierung entstehen vor allem durch die großen Unterschiede in der akustischen Impedanz von Wandlermaterial und Luft. Sie führen zu erheblichen Signaldämpfungen. Durch die Verwendung von Kunststoff-Folien z.B. aus porösem Polypropylen kann dieser Unterschied stark reduziert werden. Im Beitrag werden die akustischen Eigenschaften dieser Folien untersucht und im Hinblick auf ihre Eignung für die Luftultraschall-Technik analysiert. T2 - DACH-Jahrestagung 2004 - ZfP in Forschung, Entwicklung und Anwendung CY - Salzburg, Österreich DA - 2004-05-17 KW - Luftschall-ZfP KW - Ultraschall-Wandler PY - 2004 UR - http://www.ndt.net/article/dgzfp04/papers/p11/p11.htm SP - 1 EP - 4 CY - Salzburg, Österreich AN - OPUS4-19059 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Döring, Joachim A1 - Stark, Wolfgang A1 - Mc Hugh, Jarlath A1 - Bartusch, Jürgen T1 - Erfassung des Fließ-Härtungs-Verhaltens von Duromeren mit Ultraschall N2 - Das Fließ-Härtungs-Verhalten von Duroplastformmassen wird gegenwärtig nur unvollständig durch empirische Größen beschrieben. Diese ungenauen und unsicheren Angaben können zu Schwierigkeiten bei der optimalen Einstellung der Fertigungsmaschinen des Verarbeiters führen. Insbesondere Veränderungen der Formmasseeigenschaften während des Transportes und der Lagerung stören die Produktion. Das vorgestellte Messverfahren mit Ultraschall-sensoren ermöglicht die schnelle und vollständige Erfassung des Fließ-Härtungs-Verhaltens, auch während des technologischen Prozesses. Experimentelle Ergebnisse zu Alterungs-erscheinungen dieser Formmassen illustrieren den Nutzen des Verfahrens für Formmasse-produzenten und -verarbeiter. T2 - DGZfP-Jahrestagung 1999 CY - Celle, Deutschland DA - 1999-05-10 PY - 1999 SN - 3-931381-27-7 IS - DGZfP-BB 68 SP - 221 EP - 228 AN - OPUS4-22937 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bartusch, Jürgen A1 - Döring, Joachim A1 - Sickert, Roland A1 - Wüstenberg, Hermann A1 - Albayrak, C. A1 - Rößling, G. T1 - Eine neue Methode zur Bestimmung des Rückstreuverhaltens disperser Systeme T2 - DGZfP-Jahrestagung 1994 CY - Timmendorfer Strand, Deutschland DA - 1994-05-09 PY - 1994 IS - DGZfP-BB 43 SP - 341 EP - 346 AN - OPUS4-22932 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schenk, Gottfried A1 - Erhard, Anton A1 - Döring, Joachim A1 - Möhrle, Walter T1 - Gerät zur Linearabtastung mit Strahlergruppen (Real-Time-Scanner-Gerät) N2 - Im Labor für Ultraschallverfahren der BAM wurde ein Gerätesystem zum Betrieb von linearen Strahlergruppen entwickelt, aufgebaut und erprobt. Es besteht aus einer Geräteeinheit mit 64 Sende- und 64 Empfangskanälen, einem Steuerrechner mit integriertem Transientenrekorder und wurde mit einem Linienarray mit 32 Elementen und einer Frequenz von 17 MHz erprobt. Das Schallbündel einer Gruppe von 8 Elementen kann per elektronischem Versatz über den Gesamtschwinger bewegt und dabei gleichzeitig geschwenkt und fokussiert werden. Dabei konnten Wanddicke'n von 0,5 mm sowie eine Anordnung von Flachbodenbohrungen mit 0,7 mm Durchmesser mit großer Genauigkeit nachgewiesen werden. Mögliche Anwendungen sind die Prüfung von Punktschweißverbindungen, die Korrosionsprüfung, die Prüfung von Flugzeugkomponenten, die Schweißnahtprüfung. T2 - DACH-Tagung 1996 CY - Lindau, Deutschland DA - 1996-05-13 PY - 1996 SN - 3-931381-07-0 VL - 52 SP - 541 EP - 548 AN - OPUS4-22934 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Döring, Joachim A1 - Stark, Wolfgang T1 - Untersuchungen zur Aushärtung von Duroplasten T2 - DACH-Tagung 1996 CY - Lindau, Deutschland DA - 1996-05-13 PY - 1996 SN - 3-931381-07-0 VL - 52 SP - 765 EP - 771 AN - OPUS4-22935 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Döring, Joachim A1 - Lange, Karsten A1 - Bartusch, Jürgen A1 - Möhrle, Walter A1 - Wüstenberg, Hermann A1 - Fröhlich, H.-J. T1 - Fokussierende Wandlerzeile zur Ultraschall-Untersuchung kleiner Schweißnähte N2 - Die Ultraschallmikroskopie von kleinen Bauteilen mit fokussierenden Prüfköpfen ist seit Jahren gängige Praxis. Leider Ist sie für den Einsatz in der On-Line- Qualitätskontrolle zu zeitaufwändig. Deshalb wurde an der Bundesanstalt für Materialforschung und -prüfung (BAM) auf der Basis von Polyvinyliden-Fluorid (PVDF) wurde eine fokussierende Wandlerzeile entwickelt Sie ist Teil eines Prüfgerätes, das durch die Verbindung von mechanischer und elektronischer Steuerung des Ultraschallfeldes hohe Abtastgeschwindigkeiten erreicht. Dadurch, können die Prüfzeiten so stark reduziert werden, dass eine On-line-Nutzung möglich wird. Das Ultraschallfeld der Wandlerzeile wurde dreidimensional ausgemessen und das Ergebnis mit einem numerischen Modell /1/ verglichen. Die Übereinstimmung zwischen berechnetem und gemessenem Schallfeld war sehr gut. Eine Optimierung der elektronischen Ansteuerung führte darüberhinaus zu einer erheblichen Reduzierung der störenden Nebenmaxima. Die Mittenfrequenz der Prüfimpulse liegt über 15 MHz und der Fokus des Prüfkopfes beträgt weniger als 0,5 mm im Durchmesser. Mit dieser Wandlerzeile und der entsprechenden elektronischen Steuerung wurde eine Aluminium-Schweißnaht untersucht, die vorher mit einem konventionellen fokussierenden Prüfkopf abgetastet worden war. Beide Prüfergebnisse zeigen die gleiche Strukturauflösung, so dass der Zeitgewinn uneingeschränkt als Vorteil für die Wandlerzeile zu Buche schlägt. T2 - DGZfP-Jahrestagung 1998 CY - Bamberg, Deutschland DA - 1998-09-07 PY - 1998 SN - 3-931381-23-4 IS - DGZfP-BB 63 SP - 477 EP - 483 AN - OPUS4-22936 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Döring, Joachim T1 - Verwendung von Polypropylen-Schaumfolie in Luftschallprüfköpfen T2 - Workshop "Innovative ZfP mit bildgebender Ultraschallprüftechnik" CY - Braunschweig, Germany DA - 2009-03-06 PY - 2009 AN - OPUS4-18929 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Döring, Joachim A1 - Bartusch, Jürgen A1 - Kreutzbruck, Marc T1 - Spektroskopische Untersuchungen an Polypropylen-Schaumfolie mit Luftultraschall T2 - DGZfP-Jahrestagung 2009 CY - Münster, Germany DA - 2009-05-18 PY - 2009 AN - OPUS4-19404 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Döring, Joachim A1 - Bartusch, Jürgen A1 - Brekow, Gerhard A1 - Kreutzbruck, Marc T1 - Nachweis verdeckter, nichtmetallischer Objekte in Textilien T2 - Sensor + Test CY - Nuremberg, Germany DA - 2009-05-26 PY - 2009 AN - OPUS4-19453 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Döring, Joachim A1 - Bartusch, Jürgen A1 - Brekow, Gerhard A1 - Kreutzbruck, Marc T1 - Eigenschaften von Textilien mit Ultraschall gemessen T2 - Sensor + Test CY - Nuremberg, Germany DA - 2009-05-26 PY - 2009 AN - OPUS4-19454 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gaal, Mate A1 - Döring, Joachim A1 - Brekow, Gerhard A1 - Kreutzbruck, Marc ED - Mazal, Pavel T1 - Detection of flaws with lamb waves and air-coupled ultrasound T2 - 5th International workshop of NDT experts - NDT in progress 2009 CY - Prague, Czech Republic DA - 2009-10-12 KW - Lamb waves KW - Air-coupled probes KW - Beam profile KW - Ultrasonic testing PY - 2009 SN - 978-80-214-3968-9 SP - 53 EP - 58 AN - OPUS4-20335 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gaal, Mate A1 - Döring, Joachim A1 - Prager, Jens A1 - Brekow, Gerhard A1 - Kreutzbruck, Marc T1 - Fehlernachweis mit Plattenwellen und Luftultraschall T2 - DGZfP-Jahrestagung 2009 CY - Münster, Deutschland DA - 2009-05-18 KW - Plattenwellen KW - Luftultraschall KW - Ultraschallprüfung PY - 2009 SN - 978-3-940283-16-0 IS - DGZfP-BB 115 ( Di.1.A.2) SP - 1 EP - 7 AN - OPUS4-20516 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -