TY - JOUR A1 - Cuéllar, Pablo A1 - Baeßler, Matthias A1 - Georgi, Steven A1 - Rücker, Werner ED - Triantafyllidis, T. T1 - Special issues for the coupled transient simulation of laterally loaded offshore piles and novel experimental findings T2 - Workshop Gründung von Offshore-Windenergieanlagen CY - Karlsruhe, Germany KW - Offshore pile foundation KW - Cyclic lateral load KW - Pore pressure accumulation KW - Model testing PY - 2010 SN - 0453-3267 IS - 172 SP - 117 EP - 138 CY - Karlsruhe AN - OPUS4-24496 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Baeßler, Matthias A1 - Rücker, Werner A1 - Cuéllar, Pablo A1 - Georgi, Steven A1 - Karabeliov, Krassimire T1 - Large-scale testing facility for cyclic axially loaded piles N2 - Offshore piles have to withstand predominantly cyclic axial loads when they are installed in multi-pile configurations, as in jacket foundations. The dimensions of the pile are governed by both the internal capacity and the fatigue behaviour of the steel cross-section as well as by its external capacity in the pile-soil interaction. Owing to the large numbers of piled foundations required for current and future offshore wind farms, there is an urgent need to optimize the dimensions and related costs of single piles. With regard to the pile capacity, two major topics of research are the determination of possible capacity gains due to pile ageing effects and proper consideration of cyclic degradation. In order to investigate both effects, a large-scale testing facility has been constructed at the BAM TTS site in Horstwalde near Berlin. This open-air facility allows large tubular driven piles to be loaded cyclically in both tension and compression while studying the ageing effects by introducing delays between the testing campaigns. First results already show a moderate increase in pile capacity over time. Concerning the anticipated capacity degradation of cyclically loaded piles, preliminary results show an unexpected behaviour. Additional tests are currently being conducted for further clarification. KW - Steel driven piles KW - Offshore foundations KW - Cyclic axial loading KW - Pile ageing KW - Large-scale field testing PY - 2013 U6 - https://doi.org/10.1002/stco.201310028 SN - 1867-0520 SN - 1867-0539 VL - 6 IS - 3 SP - 200 EP - 206 PB - Ernst & Sohn CY - Berlin AN - OPUS4-29535 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rücker, Werner A1 - Karabeliov, Krassimire A1 - Cuéllar, Pablo A1 - Baeßler, Matthias A1 - Georgi, Steven T1 - Großversuche an Rammpfählen zur Ermittlung der Tragfähigkeit unter zyklischer Belastung und Standzeit N2 - Im Rahmen mehrerer vom Bundesumweltministerium geförderter Forschungsvorhaben untersucht die BAM Bundesanstalt für Materialforschung und -prüfung zusammen mit Partnern aus Industrie und Wissenschaft das Tragverhalten von zyklisch lateral und axial belasteten Rammpfählen für Offshore-Windkraftanlagen. Neben Modellversuchen im Labor werden hierbei auch Großversuche durchgeführt. In diesem Beitrag wird das neu erstellte Testfeld der BAM zur Prüfung von Pfählen in Horstwalde vorgestellt. In den laufenden Großversuchen werden Parameter wie Tragfähigkeitsminderung infolge zyklisch-axialer Lasten im Druck- und Zugbereich sowie die Zunahme von Tragfähigkeiten durch sogenannte Anwachseffekte untersucht. Bezüglich der zyklischen Belastungen werden insbesondere als unsicher anzunehmende Wertepaare in den derzeit verwendeten Interaktionsdiagrammen betrachtet, wobei hier das Hauptaugenmerk aber nicht nur auf dem Versagen des Pfahls, sondern auch auf der Ermittlung der Resttragfähigkeit nach definierten Zyklenzahlen liegt. Im Beitrag werden erste Ergebnisse zu den Anwachseffekten präsentiert und mit Ergebnissen aus der Literatur verglichen. Des Weiteren werden das Versuchsprogramm zu den zyklisch axial belasteten Pfählen vorgestellt und erste Ergebnisse gezeigt. In einem Ausblick werden weitere Ziele des Forschungsvorhabens beschrieben. Hierzu gehören die Validierung und Kalibrierung eines existierenden Modells zur Ermittlung der Tragfähigkeit unter zyklischer Belastung auf der Grundlage aktueller Messdaten am Pfahl.----------------------------------------------------------------------------------------------- Large-scale tests on driven piles for the investigation of pile capacity under cyclic loading and ageing effects. The cyclic behaviour of axially and laterally loaded piles for the foundation of offshore wind turbines is being investigated by the Federal Institute for Materials Research and Testing (BAM) in the frame of several research projects funded by the German Federal Ministry for the Environment and carried out in cooperation with industrial and academic partners. To this end, physical model tests in reduced scale as well as large scale field tests are being performed. This paper presents the new pile testing facility in the BAM's testing site at Horstwalde. The large-scale tests being performed there are aiming at the pile capacity degradation due to cyclic axial loading (both in tension and compression) as well as at the investigation of the capacity gains due to ageing effects (pile setup). Concerning the cyclic loading, the investigations have been mainly focused on special load combinations where there is little experience and where current interaction diagrams are loosely defined. However, the aim of the tests was not the cyclic failure, but rather the assessment of the post-cyclic capacity after the application of a pre-defined number of load cycles. Here, the testing program is summarised and some key results from the first testing campaign are discussed. The paper also presents some preliminary results concerning the capacity gains through ageing and compares them to previous experience from the literature. Finally, the paper gives an outlook on further goals of the current research projects, including the validation and calibration of a design model for the cyclic capacity of piles based on measured data from real piles. PY - 2013 U6 - https://doi.org/10.1002/gete.201200021 SN - 0172-6145 SN - 1865-7362 SN - 2190-6653 VL - 36 IS - 2 SP - 77 EP - 89 PB - VGE Verl. GmbH CY - Essen AN - OPUS4-29517 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bronsert, Jeffrey A1 - Baeßler, Matthias A1 - Cuéllar, Pablo A1 - Rücker, Werner ED - Dimitrovová, Z. ED - de Almeida, J.R. ED - Goncalves, R. T1 - Numerical modeling of train-track-interaction at bridge transition zones considering the long-term behaviour T2 - ICOVP-2013 - 11th International conference on vibration problems CY - Lisbon, Portugal DA - 2013-09-09 KW - Train-track-interaction KW - Transition zone KW - Track settlement PY - 2013 SN - 978-989-96264-4-7 SP - 1 EP - 10(?) AN - OPUS4-29591 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Cuéllar, Pablo A1 - Baeßler, Matthias A1 - Rücker, Werner T1 - Pore-pressure accumulation and soil softening around pile foundations for offshore wind turbines T2 - OMAE 2012 - 31st International conference on ocean, offshore and artic engineering CY - Rio de Janeiro, Brazil DA - 2012-07-01 KW - Offshore pile foundation KW - Cyclic loading KW - Coupled numerical modelling KW - Pore-pressure accumulation KW - Softening KW - Liquefaction PY - 2012 SN - 978-0-7918-4491-5 VL - 4 SP - 219 EP - 228 PB - ASME CY - New York, N.Y. AN - OPUS4-26738 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Georgi, Steven A1 - Baeßler, Matthias A1 - Cuéllar, Pablo T1 - Verformungsakkumulation von Offshore-Pfahlgründungen unter zyklischer Belastung N2 - Die Berechnung von Verformungen lateral belasteter Pfahlgründungen bedingt in der Regel die Überführung der transienten Belastungen aus verschiedenen Umwelteinwirkungen in eine meist sinusförmige zyklische Belastung mit konstanter Amplitude. Dies bringt die Vernachlässigung der Reihenfolge, in der die realen Belastungen auftreten, mit sich. Die Voraussetzung dafür ist, dass der Einfluss dieser Reihenfolge auch tatsächlich gering ist. Da die meisten experimentellen Untersuchung hierzu sich auf die Elementebene und relativ geringe Zyklenzahlen beschränken, wird hier eine Versuchsserie präsentiert, in welcher Modellpfähle durch Zyklenpakete mit unterschiedlichen Amplituden in variierender Reihenfolge und hohen Lastspielzahlen belastet werden. Es zeigt sich ein geringer bis vernachlässigbarer Einfluss der Reihenfolge der Lastblöcke für reine Schwellbelastungen. T2 - 32. Baugrundtagung CY - Mainz, Germany DA - 2012-09-26 PY - 2012 SN - 9783981395358 SP - 97 EP - 104 CY - Essen AN - OPUS4-26769 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Baeßler, Matthias A1 - Bronsert, Jeffrey A1 - Cuéllar, Pablo A1 - Rücker, Werner ED - Pombo, J. T1 - The stability of ballasted tracks supported on vibrating bridge decks, abutments and transition zones N2 - The track on bridges is affected by cyclic and dynamic action arising from the train passage and the reaction of the track supporting structure. Concerning the track, the current bridge design procedures include two major engineering tasks: On the one hand the stability of the track supported on the bridge deck has to be satisfied. In order to reduce the deterioration of the track the elasticity of the track has to be adapted for the stiff bridge deck. Furthermore, lateral stability has also to be satisfied. The vibration of the bridge structure has to be taken into account because it can affect the stability of the ballasted track. On the other hand the transition zone between bridge structure, abutment and the track on the subgrade is a matter of permanent concern. The changes in stiffness, in the dynamic behavior arising from the rolling stock and the relative deflection between the bridge structure and the abutment induce a nearly unavoidable problem for the long term behaviour on the track. BAM has conducted intensive experimental work to study the behaviour of the ballasted track on dynamically excited bridges. The state of the art is a design value for the deck acceleration of 0.35 g as established in the ENV 1991-1. In our experimental investigations the design value was verified. The influence of a frequency content higher than 30 Hz and of single vibration amplitudes on the track deterioration was evaluated. Both vertical and lateral stability were investigated. The influence of vibrations on the lateral stability can be more severe since the lateral stability could involve a sudden failure of the track. Furthermore, a simulation tool was developed to calculate the lateral stability on a vibrating bridge deck. For this simulation tool a parameter study was undertaken [1] where combinations of the curvature of the bridge-track system, the design temperature and the bridge deck vibrations were investigated. Parts of this study are incorporated in this paper. In a current research project the investigations are extended to the interaction of the train-track-dynamics and the long term behaviour of the transition zone. The main emphasis is on the integration of the possible deterioration of the structural components in the numerical modelling of the relevant structural elements of the vehicle, the bridge and bridge abutment structure. An outlook is given to a complete model for the assessment of the track behaviour at railway bridges. T2 - 1st international conference on railway technology: research, development and maintenance CY - Las Palmas, Gran Canaria, Spain DA - 18.04.2012 KW - Ballast KW - Acceleration KW - Bridge deck KW - Track deterioration KW - Track stability KW - Transition zone PY - 2012 SN - 978-1-905088-53-9 U6 - https://doi.org/10.4203/ccp.98.13 SN - 1759-3433 N1 - Serientitel: Civil-Comp Proceedings – Series title: Civil-Comp Proceedings VL - 98 IS - Paper 13 SP - 1 EP - 20 PB - Civil Comp Press AN - OPUS4-26900 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Cuéllar, Pablo A1 - Baeßler, Matthias A1 - Georgi, Steven A1 - Rücker, Werner T1 - Porenwasserdruckaufbau und Bodenentfestigung um Pfahlgründungen von Offshore-Windenergieanlagen N2 - Die Gründung von Offshore-Windenergieanlagen erfordert oft die Installation von Stahl-Pfählen mit großem Durchmesser, entweder als Monopile- oder Mehrpfahl-Konfiguration (Jacket, Tripod, usw.). In dieser Veröffentlichung werden die Auswirkungen einer zyklischen lateralen Belastung auf Offshore-Pfahlgründungen untersucht. Hierbei wird besonderes Augenmerk auf die Entwicklung des Porenwasserdrucks im umgebenden gesättigten Boden gelegt. Es wird gezeigt, dass der progressive Aufbau von Porenwasserdruck zu erheblichen Veränderungen des Verhaltens der Gründung unter externer Belastung führen kann, die die Stabilität bzw. Gebrauchstauglichkeit der Anlage potenziell gefährden. Dazu werden auch einige Effekte, die während eines realistischen Sturms von moderater Stärke entstehen, untersucht. Die transiente Abminderung der Gründungssteifigkeit wird hierbei thematisiert. Die genannten Aspekte wurden von den Autoren mittels eines gekoppelten zweiphasigen numerischen Modells der Offshore-Gründung untersucht. Das verwendete Stoffgesetz für den Boden, im Rahmen der Theorie der verallgemeinerten Plastizität, kann wichtige Merkmale von zyklischem Bodenverhalten reproduzieren, wie z. B. die Tendenz zu einer fortschreitenden Verdichtung unter zyklischer Belastung, die für Verflüssigungsphänomene unter undränierten Bedingungen verantwortlich ist. Die Notwendigkeit der Verwendung eines solchen Ansatzes wird hier anhand von Vergleichsberechnungen mit einem einfacheren Stoffmodell bzw. mit einem ungekoppelten Modell erörtet. Abschließend werden einige Implikationen der untersuchten Fragenstellungen für die praktische Bemessung von Offshore-Monopiles diskutiert und spezifische Empfehlungen gegeben.--------------------------------------------------------------------------------------------------------------------------- For the installation of wind turbines in the offshore environment and their foundation in the seabed it is customary to employ large-diameter steel piles, either in monopile or multi-pile configurations (jacket, tripod, etc. ...). The effects of cyclic lateral loading on the offshore piles and particularly the possibility of a progressive accumulation of residual pore water pressure within the saturated embedding soil are discussed in this article. Here it is shown that this can lead to significant changes of their behaviour under external loading, which can potentially compromise the foundation's stability or serviceability. Furthermore, some of the singular effects arising during a realistic storm of moderate magnitude as well as their potential for transient damages to the foundation's stiffness are addressed in the paper. For the investigation of these phenomena the authors have employed a coupled bi-phasic analytical model of the offshore foundation. The constitutive model employed for the seabed, in the frame of the theory of Generalized Plasticity, can reproduce some complex features of cyclic soil behaviour such as the tendency for a progressive densification under cyclic loading, which is responsible for the soil liquefaction phenomena in undrained conditions. Finally, some implications and specific recommendations for the design of offshore monopiles in the frame of the limit states are provided. KW - Porenwasserdruckaufbau KW - Offshore-Pfahlgründung KW - Belastung KW - Zyklische KW - Pore pressure build-up KW - Offshore pile foundation KW - Cyclic loading PY - 2012 U6 - https://doi.org/10.1002/bate.201200031 SN - 0932-8351 SN - 1437-0999 SN - 0005-6820 SN - 0341-1052 SN - 0932-6359 SN - 0932-8351 VL - 89 IS - 9 SP - 585 EP - 593 PB - Ernst & Sohn CY - Berlin AN - OPUS4-26981 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bronsert, Jeffrey A1 - Baeßler, Matthias A1 - Cuéllar, Pablo A1 - Rücker, Werner T1 - Numerische Modellierung der Fahrzeug-Fahrweg-Wechselwirkung an Brückenübergängen unter Berücksichtigung des Langzeitverhaltens N2 - In diesem Beitrag wird ein grundsätzliches Untersuchungskonzept für den Schienengebundenen Verkehr in Bezug auf das langzeitliche Verhalten am Brückenübergang vorgestellt. Das damit verbundene Ziel ist die Entwicklung eines numerischen Modells zu entwickeln, dass sowohl das Langzeitverhalten wie auch das kurzzeitdynamische Verhalten beschreibt, um konstruktive Lösungen zu entwickeln und zu optimieren. In einer ersten Phase wird der Brückenübergang mittels der FEM mit zwei unterschiedlichen Randmodellierungen für das FE-Gebiet modelliert. Die Ergebnisse der Modellierung mit einer Visko-Elastischen Randmodellierung und einer Randmodellierung mittels der Scaled-Boundary-Finite-Element Methode, werden miteinander verglichen. Unterschiede in der Wirkung auf kurzzeitdynamische Kenngrößen werden gezeigt, die heranzuziehen sind, um insbesondere Setzungen im Hinterfüllungsbereich des Brückenwiderlagers abzuschätzen. T2 - 4. VDI-Fachtagung - Baudynamik 2012 CY - Kassel, Germany DA - 25.04.2012 PY - 2012 SN - 978-3-18-092160-0 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte VL - 2160 SP - 157 EP - 170 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-26980 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rücker, Werner A1 - Karabeliov, Krassimire A1 - Cuéllar, Pablo A1 - Baeßler, Matthias A1 - Georgi, Steven ED - Savidis, S.A. T1 - Ermittlung der Tragfähigkeit von Offshore Rammpfählen unter zyklischer Belastung - Modellversuche, Großversuche, numerische Verfahren T2 - 8. Hans Lorenz Symposium CY - Berlin, Germany DA - 2012-10-11 PY - 2012 SN - 978-3-8440-1377-1 SN - 0342-3905 N1 - Serientitel: Veröffentlichungen des Grundbauinstitutes der Technischen Universität Berlin – Series title: Veröffentlichungen des Grundbauinstitutes der Technischen Universität Berlin IS - 60 SP - 311 EP - 329 PB - Shaker AN - OPUS4-27178 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Cuéllar, Pablo A1 - Georgi, Steven A1 - Baeßler, Matthias A1 - Rücker, Werner T1 - On the quasi-static granular convective flow and sand densification around pile foundations under cyclic lateral loading N2 - The saturated sand surrounding an offshore pile foundation under quasi-static cyclic lateral load can show the physical phenomena of macromechanical densification and convective granular flow. Based on the results from physical model tests at different geometrical scales, this paper provides a certain quantification of such phenomena and discusses their causes and consequences. The progressive sand densification leads to subsidence of the soil surface and a significant stiffening of the pile behaviour. Conversely, the ratcheting convective motion of two closed cells of soil beneath the pile-head is responsible for an endless grain migration at the soil surface, the inverse grading of the convected material and a direct shear of the sand at the distinct boundary of the revolving soil domain. In this respect, and from a macromechanical perspective considering the soil as a continuum, it appears that the convecting material tends to follow gradient lines of shear stress during its ratcheting motion. Concluding the paper, the practical relevance of these phenomena and their extrapolation to other conditions are briefly discussed. KW - Offshore pile foundation KW - Cyclic loading KW - Ratcheting KW - Granular convection KW - Densification PY - 2012 U6 - https://doi.org/10.1007/s10035-011-0305-0 SN - 1434-5021 SN - 1434-7636 VL - 14 IS - 1 SP - 11 EP - 25 PB - Springer CY - Berlin ; Heidelberg AN - OPUS4-25405 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Cuéllar, Pablo A1 - Baeßler, Matthias A1 - Rücker, Werner T1 - Relevant factors for the liquefaction susceptibility of cyclically loaded offshore monopiles in sand N2 - The offshore foundations may exhibit a relatively high liquefaction susceptibility due to the full saturation of the porous seabed and the cyclic nature of the typical offshore loads. Here, the particular relevance of some of the main factors that affect the liquefaction susceptibility of an offshore monopile will be addressed, focusing on the possibility of a progressive accumulation of residual pore water pressure within the saturated soil around a monopile under cyclic lateral loading. The discussion is based on numerical results obtained with a coupled FE model of the offshore foundation which includes the Biot-Zienkiewicz u-p model. A constitutive model of the Generalized Plasticity type has been used for the soil in order to reproduce important features of its behaviour under cyclic loading. This paper presents the findings derived from a parametric study of the problem and shows that the accumulation of residual pore pressure can produce significant changes of the pile's behaviour under external loading. The paper also investigates the effects caused by the loading from a realistic storm of moderate magnitude and the consequential transient degradation of the foundation's stiffness. T2 - Poromechanics V - 5th Biot conference on poromechanics CY - Vienna, Austria DA - 2013-07-10 KW - Soil liquefaction KW - Cyclic loads KW - Piles KW - Sand (hydraulic) KW - Offshore structures PY - 2013 SN - 978-0-7844-1299-2 U6 - https://doi.org/10.1061/9780784412992.160 SP - 1336 EP - 1345 AN - OPUS4-28873 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schneider, Ronald A1 - Cuéllar, Pablo A1 - Baeßler, Matthias T1 - Probabilistic approaches to the design and assessment of offshore foundations considering spatially varying site conditions N2 - In this contribution, we consider two applications in which probabilistic approaches can potentially complement or enhance the design and assessment of offshore wind turbine foundations. First, we illustrate in a numerical example that probabilistic modelling can be helpful in dealing with chang-es in turbine locations during the planning phase of an offshore wind farm. In this case, spatial probabilistic modelling of the ground conditions enables (a) an inference of the soil properties at the modified turbine location from field data collected at different locations across an offshore wind farm site and (b) an optimisation of further site investigations. Second, we discuss the uncer-tainties and risks associated with the installation of large diameter monopiles in soils with hetero-geneities such as strong layers and/or embedded boulders. Subsequently, we present a concept for modelling, understanding, and managing these risks based on a probabilistic model of the subgrade conditions, monopile, and subgrade-pile-interaction. T2 - 3rd International Conference on Structural Integrity for Offshore Energy Industry (SI 2021) CY - Online meeting DA - 15.11.2021 KW - Probabilistic modelling KW - Spatially varying ground conditions KW - Foundation reliability analysis KW - Monopile installation risks PY - 2022 SN - 978-1-8383226-3-2 SP - 9 EP - 17 AN - OPUS4-54531 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Georgi, Steven A1 - Baeßler, Matthias A1 - Cuéllar, Pablo A1 - Karabeliov, Krassimire A1 - Rücker, Werner ED - Lutz, B. ED - Möller, G. ED - Rücker, Werner ED - Schiefelbein, N. T1 - Ermittlung von Beanspruchung und Verformungen von Pfahlgründungen - Messverfahren und Applikation N2 - Vor dem Hintergrund einer angestrebten größeren Unabhängigkeit der Energieversorgung von fossilen Energieträgern hat die Windenergie in den letzten Dekaden zunehmend an Bedeutung gewonnen. Dabei wird insbesondere die Energiegewinnung offshore in der Deutschen Nordsee, auf Grund dort vorhandener stetiger Winde und sinkender Akzeptanz von Windkraftanlagen an Land, forciert. Im Hinblick auf die Gründung dieser Anlagen wird technisches Neuland betreten. Angesichts von Wassertiefen bis über 25 m erhalten aufgelöste Gründungsstrukturen wie Tripod und Jacket oft den Vorzug vor Monopiles. Letztere waren wegen der geringen Produktions- und Installationskosten, der bisher am häufigsten angewandte Gründungstyp in flacheren Gewässern. Monopile- und Mehrpfahlgründung unterscheiden sich wesentlich im Abtrag der Belastung durch Beanspruchungen aus Wind und Wellen in den umgebenden Baugrund. Während beim Monopile die zyklischen Momente über laterale Bettung abgetragen werden, entstehen an den Mehrpfahlgründungen axiale Zug- und Druckbelastungspaare in gegenüberliegenden Pfählen. Die zyklischen Belastungen von Monopiles sind demnach hauptsächlich in lateraler Richtung zu erwarten, während für Mehrpfahlgründungen die zyklische Belastung einen überwiegend axialen Charakter aufweist. Die zyklischen axialen Lasten in den Pfählen der Mehrpfahlgründungen können die axialen Tragfähigkeiten insbesondere am Pfahlmantel reduzieren und damit evtl, zu einem Versagen der Gründung führen. T2 - Messen im Bauwesen 2014 - Neue Messtechnik und Anwendungsfälle CY - Berlin, Germany DA - 04.03.2014 KW - Zyklik KW - Pfahl KW - Tragfähigkeit KW - Dehnungsmessung PY - 2014 SN - 978-3-9815944-7-8 SP - 97 EP - 108 AN - OPUS4-30486 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Karabeliov, Krassimire A1 - Baeßler, Matthias A1 - Cuéllar, Pablo A1 - Rücker, Werner T1 - A method for system identification of a structure supported by nonlinear springs using evolutionary computing N2 - A mechanical structure supported by nonlinear springs subjected to an external load is considered. If all mechanical parameters of the system were known, the displacement of the system subjected to this load could be easily calculated. If not all of the parameters are known, but the load and the displacement are measured at one location, an inverse problem exists. In the presented problem the nonlinear springs are unknown and have to be determined. At first glance a problem needs to be solved, which is underdetermined due to the number of unknown variables. However, evolutionary computing can be applied to solve this inverse, nonlinear and multimodal problem. Sometimes a prior knowledge exists on certain system properties, which is difficult to implement into analytical or numerical solver. This knowledge can play a decisive role in identifying the system properties and it can be easily included as boundary condition when applying evolutionary algorithm. This article examines how and under what conditions the spring resistances can be identified. The procedure is exemplified at a mechanical system of a pile foundation. T2 - 2nd International conference on mathematical modeling in physical sciences 2013 CY - Prague, Czech Republic DA - 01.09.2013 PY - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-304531 UR - http://iopscience.iop.org/1742-6596/490/1/012095/pdf/1742-6596_490_1_012095.pdf SN - 1742-6588 SN - 1742-6596 VL - 490 IS - 012095 SP - 1 EP - 4 PB - IOP Publ. CY - Bristol, UK AN - OPUS4-30453 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Cuéllar, Pablo A1 - Mira, P. A1 - Pastor, M. A1 - Merodo, J.A.F. A1 - Baeßler, Matthias A1 - Rücker, Werner T1 - A numerical model for the transient analysis of offshore foundations under cyclic loading N2 - A comprehensive numerical model for the analysis of offshore foundations under a general transient loading is presented here. The theoretical basis of the model lies on the Swansea formulation of Biot's equations of dynamic poroelasticity combined with a constitutive model that reproduces key aspects of cyclic soil behaviour in the frame of the theory of generalised plasticity. On the practical side, the adoption of appropriate finite element formulations may prevent the appearance of spurious numerical instabilities of the pore pressure field. In this respect, the use of a coupled enhanced-strain element is here proposed. On the other hand, the practicality of the presented model depends ultimately on its computational efficiency. Some practical recommendations concerning the solution strategies, the matrix storage/handling procedures and the parallel multi-processor computation are here provided. Finally, the performance of the model with a benchmark study case and its practical application to analyse the soil–structure interaction of an offshore monopile under a realistic transient storm loading are discussed. KW - Offshore foundations KW - Cyclic loading KW - Numerical model KW - Pore pressure accumulation KW - Liquefaction analysis PY - 2014 U6 - https://doi.org/10.1016/j.compgeo.2014.02.005 SN - 0266-352x VL - 59 SP - 75 EP - 86 PB - Elsevier Ltd. CY - Barking AN - OPUS4-30490 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Baeßler, Matthias A1 - Rücker, Werner A1 - Cuéllar, Pablo A1 - Georgi, Steven A1 - Karabeliov, Krassimire T1 - Großmaßstäblicher Versuchsstand für zyklisch axial belastete Pfähle N2 - Offshore-Pfähle in Mehrpfahlgründungsstrukturen wie Jacket-Gründungen müssen nach der Rammung überwiegend zyklisch axialen Belastungen widerstehen. Die Abmessungen der Pfähle werden sowohl von der inneren Tragfähigkeit und dem Ermüdungsverhalten des Stahlquerschnittes als auch von der äußeren Tragfähigkeit und der Pfahl-Boden-Interaktion bestimmt. Aufgrund der großen Zahl von Pfahlgründungen, die für aktuelle und zukünftige Windparkprojekte benötigt werden, besteht ein dringender Bedarf, die Dimensionierung und die damit verbundenen Kosten des Einzelpfahles zu optimieren. Bezüglich der Pfahltragfähigkeit sind wichtige aktuelle Forschungsthemen eine mögliche Traglaststeigerung durch Anwachsen und die geeignete Abschätzung der zyklischen Degradation. Zur Untersuchung beider Effekte wurde eine großmaßstäbliche Versuchsanlage auf dem Testgelände BAM TTS in Horstwalde nahe Berlin errichtet. Auf diesem Versuchsfeld können große Stahlrohrammpfähle zyklisch druck- und zugbelastet werden. Zudem kann die Untersuchung von Alterungseffekten durch zeitlichen Versatz zwischen den Messkampagnen untersucht werden. Erste Ergebnisse zeigen einen Anstieg der Pfahltragfähigkeit bis zu ca. 60 % nach einer Standzeit von ca. 18 Monaten. Für die Degradation der Tragfähigkeit der zyklisch belasteten Pfähle zeigen die ersten vorläufigen Ergebnisse ein zum Teil unerwartetes Verhalten. Zusätzliche Untersuchungen werden derzeit zur weiteren Abklärung durchgeführt. KW - Stahlpfahl, gerammt KW - Offshore-Gründung KW - Anwachsen KW - Feldversuch KW - Tragfähigkeit KW - Rammung KW - Offshore foundation KW - Increase KW - Field test KW - Bearing capacitiy KW - Driving Versuche - Experimental set-ups KW - Berechnungs- und Bemessungsverfahren - Analysis and calculation KW - Stahlhochbau - Steel buildings KW - Mast- und Turmbau - Masts and towers KW - Stahlwasserbau - Steel structures for hydraulic engineering KW - Steel pile, driven in PY - 2014 U6 - https://doi.org/10.1002/stab.201430005 SN - 0038-9145 SN - 1437-1049 SN - 0932-6375 VL - 83 IS - Suppl. 1 (Erneuerbare Energien) SP - 26 EP - 32 PB - Ernst CY - Berlin AN - OPUS4-30898 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Cuéllar, Pablo A1 - Pastor, M. A1 - Mira, P. A1 - Fernández-Merodo, J.A. A1 - Baeßler, Matthias A1 - Rücker, Werner ED - Benz, T. ED - Nordal, S. T1 - Numerical investigations for the pile foundation of an offshore wind turbine under transient lateral load N2 - Numerical analysis can be useful for the investigation of important aspects of offshore foundation prototypes that otherwise could hardly be studied experimentally, like the evolution of pore-water pressure around the monopile foundation of an offshore wind turbine under extreme loading. A combination of mixed pressuredisplacement formulations along with a constitutive model for sands based on the Generalized Plasticity Theory can replicate accurately the soil behaviour in saturated conditions. However, additional issues must be taken into account in order to perform numerical simulations of offshore piles. Some implications of the Babuska-Brezzi restriction, as well as considerations about the pile-soil interface and suitable solution strategies are discussed here. Due to the high cost of the transient analysis, the parallel computation offers a promising perspective, but can be complex and needs to be implemented carefully in order to avoid a performance deterioration. A brief overview on current trends and functional software is given here. T2 - 7th European conference on numerical methods in geotechnical engineering (NUMGE 2010) CY - Trondheim, Norway DA - 2010-06-02 KW - Offshore pile foundation KW - Cyclic lateral load KW - Pore pressure accumulation PY - 2010 SN - 978-0-415-59239-0 SP - 913 EP - 919 PB - Taylor & Francis AN - OPUS4-21572 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Cuéllar, Pablo A1 - Baeßler, Matthias A1 - Rücker, Werner T1 - Ratcheting convective cells of sand grains around offshore piles under cyclic lateral loads N2 - Sand densification around the pile has traditionally been regarded as an explanation for the grain migration and soil subsidence that often occur around cyclic laterally loaded piles embedded in sand. Supported by new empirical evidence, this paper proposes that, additionally to some soil densification around the pile, the main cause for the continuous "steady-state" grain migration is a convective cell flow of sand grains in the vicinities of the pile head. Such convective flow would be caused by a ratcheting mechanism triggered by the cyclic low-frequency lateral displacements of the pile. Furthermore, the experimental results suggest that the limit between the convective cell and the static soil is marked by a distinct direct shear surface. This might shed some light into the complex phenomena related to the pile-soil interaction in the upper layers of the bedding, which are normally the main contributor for the lateral load-bearing capacity of piles. KW - Grain migration KW - Pile foundation KW - Cyclic lateral load KW - Ratcheting KW - Convection KW - Densification PY - 2009 U6 - https://doi.org/10.1007/s10035-009-0153-3 SN - 1434-5021 SN - 1434-7636 SP - 1 EP - 12(?) PB - Springer CY - Berlin ; Heidelberg AN - OPUS4-20104 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kullolli, Borana A1 - Stutz, H. H. A1 - Cuellar, Pablo A1 - Baeßler, Matthias A1 - Rackwitz, F. ED - Cardoso, A. S. ED - Borges, J. L. ED - Costa, P. A. ED - Gomes, A. T. ED - Marques, J. C. ED - Vieira, C. S. T1 - A generalized plasticity model adapted for shearing interface problems N2 - The response of many geotechnical systems, whose structural behavior depends on shearing effect, is closely related to soil structure interaction phenomenon. Experimentally it is found that the localisation of these effect happens at a narrow soil layer next to the structure. Numerically, this behavior can be modelled through inter-face elements and adequate constitutive models. In this work, a constitutive model in the framework of Gen-eralized Plasticity for sandy soils has been chosen to be adapted for the interface zone. From the direct shear experiments a sandy soil at loose and dense states under different normal pressures is considered. The adapted constitutive model is able to reproduce contraction and dilatation of the soil according to its relative density and it shows a good agreement with the experimental data. T2 - Conference CY - Porto, Portugal DA - 25.06.2018 KW - Numerical modelling KW - Soil-pile interaction KW - Interface KW - Shearing PY - 2018 SN - 978-1-138-33198-3 VL - 1 SP - 97 EP - 102 PB - NUMGE CY - Porto, Portugal AN - OPUS4-45721 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bronsert, Jeffrey A1 - Baeßler, Matthias A1 - Cuéllar, Pablo A1 - Rücker, Werner T1 - Bewertung und Optimierung von Brückenübergangsbereichen auf der Basis eines numerischen Modells für die Fahrzeug-Fahrweg-Brücken-Wechselwirkung N2 - In diesem Artikel wird ein 3D FE-Modell für den Brückenübergangsbereich vorgestellt, das eine Bewertung hinsichtlich des Langzeitverhaltens ermöglicht und an dem Optimierungsmaßnahmen diskutiert werden können. Bestandteile des numerischen Modells sind das Fahrzeug-Fahrwegmodell mit Brückenstruktur und eine Randformulierung mit der SBFEM. Die hier diskutierten Optimierungsmaßnahmen fokussieren sich auf eine reine Anpassung der Fahrwegsteifigkeit durch elastische Elemente auf der Brückenstruktur. T2 - 5. VDI-Fachtagung - Baudynamik 2015 CY - Kassel, Germany DA - 22.04.2015 PY - 2015 SN - 978-3-18-092244-7 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 2244 SP - 247 EP - 258 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-35259 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Baeßler, Matthias A1 - Bronsert, Jeffrey A1 - Cuéllar, Pablo A1 - Rücker, Werner ED - Chen, A. ED - Frangopol, D.M. ED - Ruan, X. T1 - Evaluating the degradation of ballasted track at bridges for high-speed railways N2 - The bridge design for railway bridges is far more dependent on the interaction with the traffic and the carriageway than for road bridges. This is especially true for the specific demands of the track in highspeed railways. Both maintenance and safety of the track have to be considered. The most relevant sections for the design criteria can be located at the bridge transition zones. Based on experimental investigations it is shown that bridge joint displacements, changes in stiffness and uplifting of the sleeper are causes for an increased degradation and loss in strength of the ballasted track. With respect to high speed vibrations of the bridge deck can have an even more decisive impact. Bridge deck vibrations can lead to destabilization of the bailast. In a numerical study the behavior of the track at the bridge is illustrated. T2 - IABMAS 2014 - 7th International conference of bridge maintenance, safety and management CY - Shanghai, China DA - 07.07.2014 KW - Train-track-bridge-interaction KW - Bridge transition zone KW - Assessment criteria KW - Vehicle model KW - Numerical model PY - 2014 SN - 978-1-138-00103-9 SN - 978-1-315-76069-8 SP - 1 EP - 8 PB - CRC Press AN - OPUS4-31142 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bronsert, Jeffrey A1 - Baeßler, Matthias A1 - Cuéllar, Pablo A1 - Rücker, Werner ED - Cunha, A. ED - Caetano, E. ED - Ribeiro, P. ED - Müller, G. T1 - Assessment and optimisation of bridge transition zones on the basis of a numerical model for train-track-bridge interaction N2 - The main degradation process at bridge transition zones due to traffic loads is the appearance of differential settlements. Abrupt stiffness changes, repeating traffic loads and relative displacements of the superstructure ends on bridges often aggravate this problem. In this contribution, a 3D finite element (FE) model extended with a boundary formulation in the frame of the scaled-boundary finite element method (SBFEM) for a transient analysis of train-track-bridge interaction is presented. This numerical model permits an assessment of bridge transition zone with respect to permanent deformations of the track. The main focus lies on the modeling strategies for the vehicle and their impact on suitable assessment criteria for bridge transition zones. For this purpose, two different modeling strategies for the vehicle, a moving load model and a multibody model, have been compared and discussed on the basis of the assessment criteria. The results indicate that the model of the vehicle has a minor effect for an assessment on the embankment, but that the assessment on the bridge may show significant differences depending on whether the inertial components of the vehicle (multibody model) are considered. T2 - EURODYN 2014 - 9th International conference on structural dynamics CY - Porto, Portugal DA - 30.06.2014 KW - Train-track-bridge-interaction KW - Bridge transition zone KW - Assessment criteria KW - Vehicle model KW - Numerical model PY - 2014 SN - 978-972-752-165-4 SN - 2311-9020 SP - 799 EP - 804 AN - OPUS4-31144 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Baeßler, Matthias A1 - Cuéllar, Pablo A1 - Victor, A. A1 - Lüddecke, F. ED - Triantafyllidis, T. T1 - Stability and large deformations of slender structures supported by soil materials N2 - The stability and geometric nonlinearities of slender structures are a major topic in structural design. While this topic is most relevant in the field of Structural Engineering, e.g. for steel or concrete structures, only few applications take the role of soil-structure-interaction explicitly into account. The focus of this paper is placed on the impact of soil support and its modelling for the buckling analysis based on examples both for pile foundations and for railway track stability. The general interaction between steel design and the geotechnical input will be addressed. The paper discusses and summarizes a range of subtopics based on experience and current research at the author’s institute. KW - Buckling soil-structure-interaction offshore piles track PY - 2020 SN - 978-3-030-28515-9 SN - 978-3-030-28516-6 U6 - https://doi.org/10.1007/978-3-030-28516-6 SN - 1613-7736 SN - 1860-0816 VL - 91 SP - 355 EP - 369 PB - Springer CY - Cham, Switzerland AN - OPUS4-49166 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kullolli, Borana A1 - Cuéllar, Pablo A1 - Baeßler, Matthias A1 - Stutz, H. H. T1 - Modelling and calibration for cyclic soil-structure interface behaviour N2 - The structural performance of many geotechnical systems (e.g. axially-loaded pile foundations), depends on the shearing resistance at the soil interface, which may govern the load bearing capacity of the foundation. Experimental investigations have shown that this interaction is mainly localised within a narrow shear band next to the structure. Under cyclic loading, a contraction of the soil at the interface may arise (net volume loss), possibly leading to a stress relaxation and thus to a reduction of the load bearing capacity (the so-called friction fatigue). Based on the constitutive similarities between soil continua and interfaces, we propose here the adaption of a Generalized Plasticity model for sandy soils for the numerical analysis of interface problems. In this contribution, the results of an experimental campaign for the parameter calibration of the constitutive model are presented. The tests have been conducted with a ring shear device involving different normal stresses, roughness of the steel plates as well as cyclic loading. The new modelling approach shows promising results and has the additional practical advantage that the interface zone and the soil continuum can both be described with the same constitutive model in general boundary value problems. T2 - Konferenz 7th International Symposium on Deformation Characteristics of Geomaterials CY - Glasgow, Scotland DA - 26.06.2019 KW - Soil-structure interaction KW - Offshore foundations PY - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-489096 VL - 92 SP - 13007 EP - 13013 PB - EDP Sciences CY - Glasgow, Scotland AN - OPUS4-48909 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geißler, Peter A1 - Schwarz, Johannes A1 - Cuéllar, Pablo A1 - Hüsken, Götz A1 - Baeßler, Matthias A1 - Kühne, Hans-Carsten A1 - Morrone, C. T1 - Compaction grouting to improve the pile bearing capacity in non-cohesive soil N2 - The aim of an ongoing research project is to develop a design approach for typical offshore driven piles (e.g. Jacket piles) based on the application of injections by compaction grouting directly at the pile shaft. The paper aims to present the results of laboratory and in-situ tests, which reveal the efficiency and the promising potential of the optimised foundation concept for a more economic dimensioning of pile foundations and to increase their bearing capacity in non-cohesive soil at any moment after installation. T2 - Twenty-ninth International Ocean and Polar Engineering Conference CY - Honolulu, HI, USA DA - 16.06.2019 KW - Offshore Pile Foundation KW - Compaction Grouting KW - Grout KW - Injection Sequence KW - Tensile Capacity PY - 2019 SN - 978-1-880653-85-2 SN - 1098-6189 VL - II SP - 2178 EP - 2184 PB - International Society of Offshore and Polar Engineers (ISOPE) CY - Cupertino, California, USA AN - OPUS4-48505 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kullolli, Borana A1 - Baeßler, Matthias A1 - Cuéllar, Pablo A1 - Rica, S. A1 - Rackwitz, F. T1 - An enhanced interface model for friction fatigue problems of axially loaded piles N2 - The shaft bearing capacity often plays a dominant role for the overall structural behaviour of axially loaded piles in offshore deep foundations. Under cyclic loading, a narrow zone of soil at the pile-soil interface is subject to cyclic shearing solicitations. Thereby, the soil may densify and lead to a decrease of confining stress around the pile due to microphenomena such as particle crushing, migration and rearrangement. This reduction of radial stress has a direct impact on the shaft capacity, potentially leading in extreme cases to pile failure. An adequate interface model is needed in order to model this behaviour numerically. Different authors have proposed models that take typical Interface phenomena in account such as densification, grain breakage, normal pressure effect and roughness. However, as the models become more complex, a great number of material parameters need to be defined and calibrated. This paper proposes the adoption and transformation of an existing soil bulk model (Pastor- Zienkiewicz) into an interface model. To calibrate the new interface model, the results of an experimental campaign with the ring shear device under cyclic loading conditions are here presented. The constitutive model shows a good capability to reproduce typical features of sand behaviour such as cyclic compaction and dilatancy, which in saturated partially-drained conditions may lead to liquefaction and cyclic mobility phenomena. T2 - Conference: OMAE CY - Glasgow, Scotland, UK DA - 09.06.2019 KW - Soil-structure interaction KW - Interface PY - 2019 VL - 2019 SP - Article Number: UNSP V001T10A013 PB - ASME CY - Glasgow, Scotland AN - OPUS4-48444 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Karabeliov, Krassimire A1 - Cuéllar, Pablo A1 - Baeßler, Matthias T1 - Großmaßstäbliche zyklische Versuche zum Zugtragverhalten von gerammten Stahlrohrpfählen N2 - Gerammte Stahlrohrpfähle sind das wesentlichste Gründungselement für Offshore-Konstruktionen. Typischerweise kommen diese als Monopiles oder als Mehrpfahlgründungen für Jacket-Konstruktionen zum Einsatz. Für die verhältnismäßig leichten Windenergieanlagen auf See wird bei Mehrpfahlgründungen regelmäßig die Zugtragfähigkeit maßgebend in der Bemessung. Zusätzlich sind Effekte aus wiederholten zyklischen Belastungen zu beachten, die sich auch auf die Zugtragfähigkeit auswirken können. Auch hier ergibt sich eine Besonderheit dadurch, dass im extremwertverteilten Lastspektrum wenige große (Wechsel-)Last-Amplituden entscheidend sind. Die gründungstechnischen Herausforderungen bei der Planung solcher Windparks auf See wurden von einer Reihe von Untersuchungen begleitet. Eine Versuchsserie zur Zugtragfähigkeit von großmaßstäblichen Pfählen wurde auf dem Testgelände der BAM nahe Horstwalde bei Berlin durchgeführt. Hierfür wurde ein Testfeld mit 10 Pfählen angelegt. Die Pfähle wurden monoton auf Zug und zyklisch belastet. Vergleichend wurden dynamische Pfahlprobebelastungen durchgeführt. Zwei der Pfähle wurden mit Dehnungssensoren instrumentiert und es konnte die Pfahl-Boden-Interaktion abschnittsweise ermittelt werden. T2 - 32. Christian Veder Kolloquium CY - Technische Universität Graz, Graz, Austria DA - 20.04.2017 KW - Offshore Windenergieanlagen KW - Pfahlgründungen KW - Zugtragfähigkeit KW - Zyklisches Tragverhalten PY - 2017 SN - 978-3-900484-75-0 IS - 58 SP - 103 EP - 120 PB - Gruppe Geotechnik Graz AN - OPUS4-40201 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kullolli, Borana A1 - Cuéllar, Pablo A1 - Baeßler, Matthias T1 - On contact problem application for the local behavior of soil-pile interaction N2 - In this paper a shear test, which helps to study local behavior of the soil-pile interaction, is modelled numerically with the Finite Element Method as a 2D plane strain problem. A normal pressure on top and shear displacement on side were applied. So far, the material behavior was considered elastic for the sake of simplicity. The effect of thickness on contact elements and the presence of in plane stress has been highlighted. The purpose of the paper is to find a suitable contact element which represents more close to reality a soil-pile interaction problem under cyclic axial loading. Moreover, an insight on the presence of in-plane stress shows that it needs to be considered cautiously. T2 - ICCE2017 CY - Tirana, Albania DA - 12.10.2017 KW - Contact problem KW - Numerical modelling PY - 2017 SP - 167 EP - 174 PB - Polytechnic University of Tirana CY - Tirana, Albania AN - OPUS4-42962 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Rücker, Werner A1 - Cuéllar, Pablo A1 - Georgi, Steven A1 - Karabeliov, Krassimire A1 - Baeßler, Matthias A1 - Johnsen, Björn ED - Durstewitz, M. ED - Lange, B. T1 - Please Avoid Tilting - Application-Oriented Design and Monitoring Model for Foundation Structures Subjected to Cyclic Loads N2 - A great deal is possible, even on the seabed. Together, wind and waves shake the foundations of the offshore wind turbines. "ere is also the “normal” current and ebb and #ow of the tides that are so distinctive in the North Sea. Pore water pressure can also occur on the seabed, loosening it. Where monopiles are involved, the worst case is that the stability of the whole turbine can be altered – even if such a monopile rammed into the seabed has a diameter of up to eight metres. Over half the planned offshore wind turbines in the North and Baltic Seas are to have monopile foundations, and over 40 % are to have multi-pile foundations, designed for example as a tripod. "is is why pile foundations and their loads deserve special attention. For one thing above all is to be avoided in plant operations, and that is the risk of turbine tilt. KW - Pile foundations KW - Offshore wind turbines KW - Cyclic loads PY - 2017 SN - 978-3-662-53178-5 U6 - https://doi.org/10.1007/978-3-662-53179-2 SP - 53 EP - 59 PB - Springer AN - OPUS4-39340 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Baeßler, Matthias A1 - Cuéllar, Pablo A1 - Georgi, Steven A1 - Karabeliov, Krassimire A1 - Rücker, Werner A1 - Johnsen, Björn ED - Durstewitz, M. ED - Lange, B. T1 - Uncharted Territory on the Seabed - Monitoring Procedures and Assessment Model for the Foundations of Offshore Wind Turbines N2 - Offshore wind turbines enter unknown territory, especially where the foundations are concerned. This is because offshore wind power can only make use of the experience from the common offshore constructions used by the oil and gas industry to a limited extent. The offshore wind industry has tried to reduce foundation dimensions, especially the pile lengths, as much as possible compared with those of the oil and gas industry. This is because with the large number of wind turbines involved it can provide considerable economic advantages. On the other hand, the stability of the foundations is additionally at risk because due to the much larger number of cyclic loads they are subjected to it is very difficult to predict how they will behave. Since offshore wind farms are manufactured in series, every systematic fault in the foundation acts as a series fault for a large number of turbines. This calls for monitoring – and the right dimensions of pile foundation, the most common type of foundations used for wind turbines KW - Offshore wind turbines KW - Field tests KW - Axial pile capacity PY - 2017 SN - 978-3-662-53178-5 U6 - https://doi.org/10.1007/978-3-662-53179-2 SP - 61 EP - 67 PB - Springer AN - OPUS4-39341 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Rücker, Werner A1 - Cuéllar, Pablo A1 - Georgi, Steven A1 - Karabeliov, Krassimire A1 - Baeßler, Matthias A1 - Johnsen, Björn ED - Durstewitz, M. ED - Lange, B. T1 - Schieflagen bitte vermeiden N2 - Vieles ist möglich, auch auf dem Meeresboden. Wind und Wellen rütteln gemeinsam an der Gründung, den Fundamenten der Offshore-Windenergieanlagen. Hinzu kommen die „ganz normale“ Strömung sowie die in der Nordsee besonders ausgeprägten Gezeiten von Ebbe und Flut. Zudem kann am Meeresboden Porenwasserüberdruck entstehen, der den Boden lockern und im schlimmsten Fall bei Monopiles die Stabilität der gesamten Anlage ändern kann. Selbst wenn ein solcher in den Meeresboden gerammter Pfahl bis zu 8 Meter Durchmesser hat. Über die Hälfte der geplanten Offshore-Anlagen in Nord- und Ostsee werden mit Ein-Pfahl-Gründungen geplant, über 40 % sollen als Mehrpfahl-Gründungen, zum Beispiel als Tripod, ausgeführt werden. Von daher verdienen Pfahlgründungen und ihre Belastungen besondere Aufmerksamkeit. Denn eines gilt es im Anlagenbetrieb unbedingt zu vermeiden: Eine drohende Schiefstellung der Anlage KW - Windenergie KW - Offshore KW - Pfahlgründungen PY - 2016 SN - 978-3-658-09782-0 U6 - https://doi.org/10.1007/978-3-658-09783-7 SP - 53 EP - 59 AN - OPUS4-39344 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Taylor, G.R. A1 - Tan, R. A1 - O´Brien, A.S. A1 - Baeßler, Matthias A1 - Cuéllar, Pablo A1 - Lane, J.S. A1 - Evans, E. T1 - The use of physical model testing in the development of models for potential impact assessment on the UK rail network N2 - Most railway embankments in the UK were built in the Victorian era and are of end-tipped construction using materials (usually cohesive) excavated from adjacent cuttings, resulting in a clod-and-matrix structure. Historically, there has been a lack in understanding of the mechanical behaviour of such railway embankments. In the next decade railway traffic in the UK, particularly freight, is forecast to grow considerably. Consequently, there is a need to improve the understanding of how increases in rail traffic loading may influence the mechanical behaviour of railway embankments and thus track performance. The Rail Safety and Standards Board in conjunction with Network Rail is currently undertaking a programme of applied research into this topic. As part of these studies a programme of physical model tests has been carried out. Physical model tests can provide high quality data on system performance under a large range of loading conditions and geometrical configurations. The data can be generated rapidly, with test periods of weeks or months rather than years or decades. Additionally, boundary conditions are well-defined and controlled, compared with the complex situations encountered in full scale embankments in the field. This paper summarises the physical model test programme, the development of the test set-up, the tests themselves and the conclusions drawn. T2 - European Conference on Soil Mechanics and Geotechnical Engineering CY - Edinburgh, Scotland, UK DA - 13.09.2015 KW - Railway embankment KW - Clay fill KW - Physical model testing PY - 2015 SN - 978-0-7277-6067-8 U6 - https://doi.org/10.1680/ecsmge.60678 SP - 361 EP - 366 AN - OPUS4-39374 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Karabeliov, Krassimire A1 - Cuéllar, Pablo A1 - Baeßler, Matthias A1 - Rücker, Werner T1 - System identification of inverse, multimodal and nonlinear problems using evolutionary computing - Application to a pile structure supported on nonlinear springs N2 - This paper deals with the system identification of a mechanical structure supported by nonlinear springs subjected to an external load. If all mechanical parameters of the system were known, the displacement of the system subjected to this load could be easily calculated. However, the monitoring applications often deal with the inverse problem. The loads and displacements of the system are known and certain mechanical Parameters of the system are sought. The solution of such inverse problems can be difficult, especially when they have a nonlinear and multimodal character, which often makes them appear intractable at first sight. However, evolutionary computing can be applied to solve this inverse, nonlinear and multimodal problem. Sometimes a prior knowledge exists on certain system properties, which is difficult to implement into analytical or numerical solvers. This knowledge can play a decisive role in identifying the System properties and it can be easily included as a boundary condition when applying evolutionary algorithms. This article discusses how and under what conditions the unknown spring resistances can be identified. The practical application of this procedure is exemplified here with the mechanical system of a pile foundation. KW - Evolutionary computing KW - Inverse problem KW - Multimodal solution KW - System identification KW - Pile monitoring PY - 2015 U6 - https://doi.org/10.1016/j.engstruct.2015.07.034 SN - 0141-0296 SN - 1873-7323 VL - 101 SP - 609 EP - 620 AN - OPUS4-39310 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Baeßler, Matthias A1 - Cuéllar, Pablo A1 - Georgi, Steven A1 - Karabeliov, Krassimire A1 - Rücker, Werner A1 - Johnsen, Björn ED - Durstewitz, M. ED - Lange, B. T1 - „Neuland“ auf dem Meeresboden - Überwachungsverfahren und Bewertungsmodell für die Gründung von Offshore-Windenergieanlagen N2 - Offshore-Windenergie betritt Neuland, gerade bei der Gründung. Denn Windenergie auf See kann die Erfahrungen der gängigen Offshore-Konstruktionen der Öl- und Gasindustrie nur bedingt nutzen. Mehr als dort, versucht man bei der Offshore-Windenergie, die Gründungsabmessungen – insbesondere die Pfahllängen – soweit wie möglich zu reduzieren. Denn dies kann bei der hohen Anzahl der Windenergieanlagen erhebliche wirtschaftliche Vorteile bringen. Andererseits wird die Standsicherheit der Gründungen durch den viel höheren Anteil an zyklischen Lasten gegenüber den gängigen Offshore- Strukturen in schwer einschätzbarer Weise zusätzlich gefährdet. Da Offshore-Windenergieanlagen in Serienfertigung produziert werden, wirkt sich hier jeder systematische Fehler bei der Gründung dann gleich als Serienfehler auf eine Vielzahl von Anlagen aus. Überwachung ist also angesagt – und das richtige Maß bei der Pfahlgründung, der am meisten verwendete Fundamenttyp bei Windenergieanlagen. KW - Offshore Windkraftanlagen KW - Pfahlgründungen KW - Überwachungsverfahren PY - 2016 SN - 978-3-658-09782-0 SN - 978-3-658-09783-7 U6 - https://doi.org/10.1007/978-3-658-09783-7 SP - 61 EP - 68 PB - Springer AN - OPUS4-39348 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geißler, Peter A1 - Cuéllar, Pablo A1 - Hüsken, Götz A1 - Kühne, Hans-Carsten A1 - Baeßler, Matthias T1 - Insights into compaction grouting for offshore pile foundations N2 - The authors are currently investigating the possibility to apply compaction grouting for offshore pile foundations (Jacket piles as well as monopiles) as a possible retrofitting technique for an optimised foundation concept. In this research project, we are developing a design approach aiming to predict the ideal amount and properties of a grout for a specific soil situation and desired improvement of pile bearing capacity after Installation and during service time. Both numerical and experimental tests have been carried out to investigate the injection process during which a highly viscous grout is injected into the soil under high pressure to displace and compact the surrounding soil without fracturing it. The implicit Material Point Method (MPM) based on a mixed formulation is the numerical technique chosen to deal with the expected large deformations and the arbitrary shape of the developing grout bulb. The usage of MPM prevents both the need of remeshing and the numerical instability induced by extensive mesh distortion. For validation with experimental results, we have constructed a testing chamber with one transparent sidewall. This chamber enables us to observe the injection process directly at the transparent vertical window and to measure the in-plane soil displacements and strains by means of the Digital Image Correlation (DIC) technique. The results already reveal the interrelation of soil and grout properties for a successful usage of this common ground improvement technique. T2 - 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018) CY - Madrid, Spain DA - 18.06.2018 KW - Offshore pile foundation KW - Compaction grouting KW - Material Point Method (MPM) KW - Mixed formulation KW - Digital Image Correlation (DIC) PY - 2018 SN - 978-0-7918-5130-2 SN - 2153-4772 VL - 9 SP - V009T10A013, 1 EP - 9 AN - OPUS4-46004 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Balscheit, Hagen A1 - Victor, A. A1 - Thiele, Marc A1 - Cuellar, Pablo A1 - Baeßler, Matthias A1 - Lüddecke, F. T1 - Experimental Investigation on Buckling Behavior of soil-embedded Piles N2 - Monopiles are currently the predominant foundation type for offshore wind turbines in Europe. Due to the increasing dimensions of the turbines, pile diameters beyond 10m become necessary. A design-relevant failure mode of monopiles is the local buckling of the pile wall in the embedded sections. Relevant buckling guidelines do not consider the soil-structure interaction specifically, although the embedment may allow for a reduction of wall thickness. However, Eurocode-based design concepts require a validation with comparative buckling cases for validation, either in terms of buckling curve parameters for both the algebraic stress-based and semi-numerical LBA/MNA design concept or as a calibration factor kGMNIA for fully numerical GMNIA calculations. These parameters are not yet available for embedded shells. To close this gap, we have conducted experiments on piles embedded in sand to investigate local buckling under soil-structure-interaction. The results will be used to calibrate numerical models. This research was carried out as part of the VERBATIM research project, funded by PTJ/BMWK and supported by the Carbon Trust's Offshore Wind Accelerator consortium. T2 - EUROSTEEL 2023 CY - Amsterdam, The Netherlands DA - 11.09.2023 KW - Wind KW - Wind Energy KW - Shell Buckling KW - Offshore KW - Soil-Structure-Interaction PY - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-583641 SN - 2509-7075 VL - 6 IS - 3-4 SP - 1729 EP - 1734 PB - Ernst & Sohn Gmb AN - OPUS4-58364 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Baeßler, Matthias A1 - Cuéllar, Pablo A1 - Schepers, Winfried A1 - Geißler, Peter A1 - Breithaupt, Matthias A1 - Basedau, Frank A1 - Balscheit, Hagen T1 - VERBATIM: Project Introduction and Large Scale Experiments N2 - The presentation summarizes the scope of the joint project VERBATIM on buckling of large Monopiles. The presented work from the authors focusses on the experimental field tests of large predented piles during driving and a numerical investigation on the observed buckling behaviour. T2 - Colloquium „Buckling of Offshore Wind Energy Structures“ CY - Berlin, Germany DA - 14.02.2024 KW - Buckling KW - Offshore KW - Wind Energy Structures KW - Monopiles KW - Pile-Tip-Buckling PY - 2024 AN - OPUS4-59535 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -