TY - GEN A1 - Blind, K. A1 - Jungmittag, A. A1 - Mangelsdorf, Axel T1 - The economic benefits of standardization - An update of the study carried out by DIN in 2000 N2 - Economists have been searching for the sources of economic growth since the end of the 18th century. For Adam Smith the division of labour and the accumulation of capital were causes for the increasing wealth of nations. The Austrian-American economist Joseph Alois Schumpeter further established that innovations in products and processes are prerequisites for economic growth: »The fundamental drive that starts up the capitalist machine and keeps it running comes from the new consumer goods, the new production and transport methods, the new markets, the new forms of industrial organisation, which capitalist entrepreneurship creates.« Building on these fundamental ideas, during the 1950s American Robert M. Solow – later a Nobel prize winner – developed the first formal mathematical model of economic growth. Solow was able to use a simple model to Show that economic growth within the USA could be described by three determinants: an increase in capital (e.g. machinery and infrastructure), an increase in labour, and technical progress. Later other economists were able to further refine Solow‘s growth theory. While technical progress was accepted during the early years as a fact, it became ever easier to theoretically describe and quantify its causes. The central idea of these new models is that the state and businesses invest in research and development, thus continually stimulating economic growth through new products and production methods. KW - Standards KW - Economic growth KW - Value KW - Technical progress PY - 2011 SP - 1 EP - 20 CY - Berlin AN - OPUS4-25073 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Blind, K. A1 - De Vries, H. A1 - Mangelsdorf, Axel ED - Fomin, V. ED - Jakobs, K. T1 - Openness for innovation and involvement in standardization: evidence from the community innovation survey N2 - In this paper, we explore the relationship between firms' approaches to open innovation and their decision to participate in Standardization alliances. Based on micro data of Dutch Companies surveyed in the Forth Community Innovation Survey we show that the importance of extemal knowledge is positively correlated with participation in Standardization. This suggests that firms aim to access the knowledge of other Companies and stakeholders in Order to increase their own knowledge base. The analysis also shows that firms cooperating with different actors are more likely to join Standardization. Due to the positive relationships with incoming knowledge spillovers and forms of Cooperation, we conclude that Standardization represents a specific form of collaborative knowledge-sharing and knowledge-creating strategy. In addition, we are able to show that absorptive capacity measured via Companies’ research intensity is promoting the involvement in Standardization. Besides the focus on knowledge and Cooperation variables, we explore the traditionally considered factors for alliances Formation and show that firm size, export activities and patent protection are positively correlated with participation in Standardization. T2 - 16th EURAS Annual standardisation conference - Standards for development CY - Kaunas, Lithuania DA - 08.06.2011 KW - Knowledge spillovers KW - Cooperation KW - Absorptive capacity KW - Standardisation PY - 2011 SN - 3-86130-629-8 SP - 19 EP - 36 PB - Wissenschaftsverlag Mainz CY - Aachen AN - OPUS4-25500 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Blind, K. A1 - Mangelsdorf, Axel ED - Stober, R. T1 - Standards zur Qualitätssicherung (Art. 26 V DL-RL) aus ökonomischer Perspektive N2 - Aufgrund der Immaterialität von Dienstleistungen ist es dem Nachfrager von Dienstleistungen nur schwer möglich, vor dem Konsum die Qualität einer Dienstleistung einzuschätzen. Dementsprechend fehlt es oft an Vertrauen zwischen den Anbietern von Dienstleistungen und den Nachfragern. Das fehlende Vertrauen der Dienstleistungsnachfrager oder - anderes gesagt - die Informationsasymmetrien zwischen Käufer und Verkäufer erhöhen die Transaktionskosten und lassen einen Vertragsabschluss weniger wahrscheinlich werden. Das fehlende Vertrauen der Nachfrager in die Qualität von Dienstleistungen berührt nicht nur den inländischen Handel, sondern beeinträchtigt gerade den internationalen und damit auch den innereuropäischen Handel mit Dienstleistungen. Eine Eurobarometerumfrage aus dem Jahr 2002 zeigt, dass 26% der befragten europäischen Verbraucher einem Anbieter aus einem EU-Land außer ihrem eigenen weniger vertrauen als einem nationalen Anbieter. Aus dieser Umfrage ging ebenfalls hervor, dass die Verbraucher das Sicherheitsniveau von ausländischen Produkten und Dienstleistungen als geringer empfinden als Angebote aus ihrem eigenen Land. Das mangelnde Vertrauen der Nachfrager in ausländische Dienstleistungsanbieter ist auf die fehlende Transparenz der Dienstleistungsqualität und den damit implizierten Informationsasymmetrien zurückzuführen. Die im Dienstleistungssektor vorhandenen Informationsasymmetrien verursachen beachtliche volkswirtschaftliche Kosten bzw. Ineffizienzen, die im Vergleich zu den Produktmärkten ausgeprägter sind, da Produkteigenschaften im Gegensatz zu Eigenschaften von Dienstleistungscharakteristika auch für den Endverbraucher vor dem Kauf leichter zugänglich und auch besser nachprüfbar sind. KW - Food standards KW - Trade barriers KW - SPS KW - TBT KW - Harmonization PY - 2011 SN - 978-3-452-27634-6 SP - 73 EP - 103 PB - Carl Heymanns AN - OPUS4-25502 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zi, Aikaterini A1 - Blind, K. ED - Jakobs, K. ED - De Vries, H.J. ED - Ganesh, A. ED - Gulacsi, A. ED - Soetert, I. T1 - Researchers' participation in standardisation in relation to their scientific publishing and patenting activities: An explorative case study from a public research organisation in Germany N2 - We examine the participation of public sector researchers in standardisation bodies. Whereas previous research emphasized on patents and publications as Outputs of research activities, we also consider standardisation in this study. The latter has not been adequately taken into account when measuring productivity, despite its contributions to technology transfer. Based on data of more than 600 researchers from the BAM Federal Institute of Materials Research and Testing, we perform multivariate regression to determine the influence of researchers' activities on the participation in standardisation. We make the assumption that basic research scientist publish their results mainly in high quality scientific journals, whereas applied research scientist concentrate more in technical and industry-oriented publications and patent applications. We find a difference between basic and applied research scientists regarding their probability of participating in standardisation committees and a significant influence of career qualifications in terms academic title. T2 - EURAS Proceedings 2013 - 18th EURAS Annual standardisation conference 'Boosting European competitiveness' CY - Brussels, Belgium DA - 24.06.2013 KW - Standardisation KW - Scientific publications KW - Patent applications KW - Technology transfer KW - Basic research KW - Applied research KW - Productivity KW - Public research organization PY - 2013 SN - 978-3-86130-655-9 SP - 429 EP - 443 PB - Verlagshaus Mainz GmbH AN - OPUS4-28936 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Blind, K. A1 - Mangelsdorf, Axel T1 - Alliance formation of SMEs: empirical evidence from standardization committees N2 - This paper explores the decision of small- and medium-sized enterprises (SMEs) to participate in official standard setting alliances. Based on micro data of German firms in the electrical engineering and machinery industry, we show that innovation-related variables follow the predictions of our hypotheses. Research and development (R&D) intensity exhibits an inverse U-shaped relationship on the likelihood to join alliances. The positive relation suggests that SMEs aim to access the knowledge of larger firms whereas the negative relationship indicates that SMEs exceeding a certain threshold of R&D activity are reluctant to participate in standardization because their knowledge is too essential to disclose to competitors. The importance to access external knowledge via standardization committees is underlined by a positive correlation with the relevance of incoming knowledge spillovers and a negative correlation with the relative size of companies' patent portfolios. Besides these variables, we also explore the traditionally considered factors for alliance formation and show that firm size and export intensity are positively correlated with participation. KW - Knowledge spillovers KW - Patents KW - Research and development (R&D) cooperation KW - Small- and medium-sized enterprises (SMEs) KW - Standardization KW - Trade PY - 2012 UR - http://ieeexplore.ieee.org/xpl/articleDetails.jsp?reload=true&tp=&arnumber=6203401&contentType=Early+Access+Articles&sortType%3Dasc_p_Sequence%26filter%3DAND%28p_IS_Number%3A4429834%29%26rowsPerPage%3D50 U6 - https://doi.org/10.1109/TEM.2012.2192935 SN - 0018-9391 SP - 1 EP - 9(?) PB - IEEE CY - New York, NY, USA AN - OPUS4-26601 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Blind, K. A1 - Mangelsdorf, Axel ED - Orviska, M. ED - Jakobs, K. T1 - The trade impact of ISO 9000 certifications and international cooperation in accreditation T2 - 17th EURAS annual standardisation conference CY - Kosice, Slovakia DA - 2012-06-18 KW - Standardization KW - Certification KW - Accreditation KW - International trade KW - Gravity mode PY - 2012 SN - 978-3-86130-337-4 N1 - Serientitel: The EURAS board series – Series title: The EURAS board series SP - 21 EP - 33 PB - Verlagshaus Mainz GmbH AN - OPUS4-26605 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Asna Ashari, Parsa A1 - Blind, K. ED - Jakobs, K. ED - Kim, D.-h. T1 - The Impact of Publications, Patents, and Standards on International Trade - The Case of Hydrogen N2 - Hydrogen as a clean energy carrier has received increased attention due to climate change and the need to introduce new, low-emissions technologies to the market. However, the drivers of increased hydrogen use have been barely explored. Therefore, this research paper investigates the impacts of publications, patents, and standards on international hydrogen trade, an established technology diffusion channel. In a fixed-effects (FE) regression model covering 37 countries between 1995 and 2020, we demonstrate that publications, patents, and standards are associated with increased levels of hydrogen exports and imports. Furthermore, we test the technology gap theory and explore the meaning of our empirical results for the hydrogen technological innovation system (TIS). Among others, we show that publications, patents, and standards can contribute to a more developed hydrogen TIS. T2 - 26th EURAS Annual Standardisation Conference – Standards for Digital Transformation: Blockchain and Innovation CY - Glasgow, Great Britain DA - 08.06.2022 KW - Hydrogen Trade KW - Publications KW - Patents KW - Standards KW - Technological Innovation System KW - Technology Gap Theory PY - 2022 SN - 978-3-95886-446-7 SP - 25 EP - 44 PB - Verlag Mainz CY - Mainz AN - OPUS4-55061 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Koch, Claudia A1 - Ladu, Luana A1 - Asna Ashari, Parsa A1 - Blind, K. A1 - Castka, P. ED - Jakobs, K. ED - Kim, D.-h. T1 - Digital maturity in the conformity assessment industry: An explorative study from Germany N2 - The services of Conformity Assessment Bodies (CABs) are essential to provide for trust in and safety of digital products and services by demonstrating that requirements from standards are met. Thus, it is vital that CABs are ready to fulfil their tasks also in the digital transformation, having the necessary capabilities and resources. Our study is the first to comprehensively assess the digital maturity in the CA industry and to provide some insights into the readiness of the industry to support and at the same time benefit from the digital age. To this end, we developed and implemented a digital maturity model tailored to the CA industry. In this paper, we present first results from our survey among 354 accredited CABs in Germany. With our research we contribute to better understand the digital transformation and maturation of CABs along distinctive stages. The findings suggest that the transformation process in the CA industry is just at the beginning, with the majority of CABs still in early stages of digital maturity. Also, only a few of them already exploit the latest digital technologies and applications like artificial intelligence, blockchain or big data analytics. Nevertheless, CABs regard digitalization as a big opportunity – for themselves and their industry. T2 - 26th EURAS Annual Standardisation Conference – Standards for Digital Transformation: Blockchain and Innovation CY - Glasgow, Great Britain DA - 08.06.2022 KW - Digital maturity KW - Digital transformation KW - Digitalization KW - Quality infrastructure KW - Conformity assessment KW - Conformity assessment body KW - Testing KW - Certification KW - Inspection KW - Laboratory PY - 2022 SN - 978-3-95886-446-7 SP - 253 EP - 272 PB - Verlag Mainz CY - Mainz AN - OPUS4-55065 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mirtsch, Mona A1 - Koch, Claudia A1 - Asna Ashari, Parsa A1 - Blind, K. A1 - Castka, P. T1 - Quality assurance in supply chains during the COVID-19 pandemic: Empirical evidence on organisational resilience of conformity assessment bodies N2 - Global supply chains rely on the compliance and safety of their products, processes, and facilities. These vital services (often referred to as ‘quality assurance’ or ‘conformity assessment’ services) are provided by Conformity Assessment Bodies (CABs). This empirical study explores the impact of the COVID-19 pandemic on CABs as well as their response to the resulting challenges. Data was gathered through an online survey among all accredited CABs in Germany, which resulted in 555 valid responses. Taking a resilience perspective, we reveal that CABs were hit hard by the disruptions caused by the pandemic, albeit to different degrees, in part due to their type of services, size, and sectors served. Furthermore, we find that contingency plans do not directly cushion order declines (as the main indicator of the economic impact of the pandemic) but rather indirectly through helping CABs respond more quickly, which in turn mitigates their order declines. However, our results show that contingency plans can also have adverse effects if they hinder flexible reaction to the crisis. The findings of our study help managers and policymakers learn from the COVID-19 pandemic and improve the resilience of the conformity assessment sector and quality assurance in the event of future crises. KW - Quality Infrastructure KW - Digitalization KW - Testing laboratories KW - Organizational resilience KW - COVID-19 KW - Conformity assessment PY - 2022 U6 - https://doi.org/10.1080/14783363.2022.2078189 SP - 1 EP - 23 PB - Taylor & Francis AN - OPUS4-55066 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Koch, Claudia A1 - Ladu, Luana A1 - Asna Ashari, Parsa A1 - Blind, K. A1 - Castka, P. T1 - Digitalization in conformity assessment in Singapore - A QI-FoKuS study N2 - This report summarizes findings from the first comprehensive study on digitalization in conformity assessment in Singapore. The reults are based on data from a survey among conformity assessment bodies (CABs) conducted in 2022. It highlights the digital maturity of the organizations, the motives, benefits and obstacles of digital transformation as well as the actual technology trends. This study is part of a global project that covers various other countries (see www.qi-fokus.de). KW - COVID-19 KW - Calibration KW - Certification KW - Conformity assessment KW - Conformity assessment body KW - Digital transformation KW - Digitalization KW - Laboratory KW - Quality infrastructure KW - TIC KW - Testing PY - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-561363 UR - https://www.qi-fokus.de SP - 1 EP - 47 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-56136 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Koch, Claudia A1 - Ladu, Luana A1 - Asna Ashari, Parsa A1 - Blind, K. A1 - Castka, P. T1 - Digitalization in conformity assessment in New Zealand - A QI-FoKuS study N2 - This report summarizes findings from the first comprehensive study on digitalization in conformity assessment in New Zealand. The reults are based on data from a survey among conformity assessment bodies (CABs) conducted in 2022. It highlights the digital maturity of the organizations, the motives, benefits and obstacles of digital transformation as well as the actual technology trends. This study is part of a global project that covers various other countries (see www.qi-fokus.de). KW - COVID-19 KW - Calibration KW - Certification KW - Conformity Assessment KW - Conformity assessment body KW - Digital transformation KW - Digitalization KW - Laboratory KW - Quality infrastructure KW - TIC KW - Testing PY - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-564038 UR - https://www.qi-fokus.de SP - 1 EP - 44 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-56403 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Ladu, Luana A1 - Koch, Claudia A1 - Asna Ashari, Parsa A1 - Blind, K. A1 - Castka, P. T1 - Digitalization in conformity assessment in Peru - A QI-FoKuS study N2 - This report summarizes findings from the first comprehensive study on digitalization in conformity assessment in Peru. The reults are based on data from a survey among conformity assessment bodies (CABs) conducted in 2022. It highlights the digital maturity of the organizations, the motives, benefits and obstacles of digital transformation as well as the actual technology trends. This study is part of a global project that covers various other countries (see www.qi-fokus.de). KW - COVID-19 KW - Calibration KW - Certification KW - Conformity assessment KW - Conformity assessment body KW - Digital transformation KW - Digitalization KW - Laboratory KW - Quality infrastructure KW - TIC KW - Testing PY - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-563417 UR - https://www.qi-fokus.de SP - 1 EP - 44 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-56341 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Ladu, Luana A1 - Koch, Claudia A1 - Asna Ashari, Parsa A1 - Blind, K. A1 - Castka, P. T1 - Digitalization in conformity assessment in West Africa - A QI-FoKuS study N2 - This report summarizes findings from the first comprehensive study on digitalization in conformity assessment in West Africa. The reults are based on data from a survey among conformity assessment bodies (CABs) conducted in 2022. It highlights the digital maturity of the organizations, the motives, benefits and obstacles of digital transformation as well as the actual technology trends. This study is part of a global project that covers various other countries (see www.qi-fokus.de). KW - COVID-19 KW - Calibration KW - Certification KW - Conformity assessment KW - Conformity assessment body KW - Digital transformation KW - Digitalization KW - Laboratory KW - Quality infrastructure KW - TIC KW - Testing PY - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-563631 UR - https://www.qi-fokus.de SP - 1 EP - 45 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-56363 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Ladu, Luana A1 - Koch, Claudia A1 - Asna Ashari, Parsa A1 - Blind, K. A1 - Castka, P. T1 - Digitalization in conformity assessment in Mexico - A QI-FoKuS study N2 - This report summarizes findings from the first comprehensive study on digitalization in conformity assessment in Mexico. The reults are based on data from a survey among conformity assessment bodies (CABs) conducted in 2022. It highlights the digital maturity of the organizations, the motives, benefits and obstacles of digital transformation as well as the actual technology trends. This study is part of a global project that covers various other countries (see www.qi-fokus.de). KW - COVID-19 KW - Calibration KW - Certification KW - Conformity assessment KW - Conformity assessment body KW - Digital transformation KW - Digitalization KW - Laboratory KW - Quality infrastructure KW - TIC KW - Testing PY - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-563645 UR - https://www.qi-fokus.de SP - 1 EP - 44 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-56364 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Koch, Claudia A1 - Ladu, Luana A1 - Ashari, Parsa Asna A1 - Blind, K. A1 - Castka, P. T1 - Digitalization in conformity assessment in North Macedonia - A QI-FoKuS study N2 - This report summarizes findings from the first comprehensive study on digitalization in conformity assessment in North Macedonia. The reults are based on data from a survey among conformity assessment bodies (CABs) conducted in 2022. It highlights the digital maturity of the organizations, the motives, benefits and obstacles of digital transformation as well as the actual technology trends. This study is part of a global project that covers various other countries (see www.qi-fokus.de). KW - COVID-19 KW - Calibration KW - Certification KW - Conformity assessment KW - Conformity assessment body KW - Digital transformation KW - Digitalization KW - Laboratory KW - Quality infrastructure KW - TIC KW - Testing PY - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-565986 UR - https://www.qi-fokus.de SP - 1 EP - 44 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-56598 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Ladu, Luana A1 - Koch, Claudia A1 - Asna Ashari, Parsa A1 - Blind, K. A1 - Castka, P. T1 - Digitalization in conformity assessment in the United Kingdom - A QI-FoKuS study N2 - This report summarizes findings from the first comprehensive study on digitalization in conformity assessment in the United Kingdom. The reults are based on data from a survey among conformity assessment bodies (CABs) conducted in 2022. It highlights the digital maturity of the organizations, the motives, benefits and obstacles of digital transformation as well as the actual technology trends. This study is part of a global project that covers various other countries (see www.qi-fokus.de). KW - COVID-19 KW - Calibration KW - Certification KW - Conformity assessment KW - Conformity assessment body KW - Digital transformation KW - Digitalization KW - Laboratory KW - Quality infrastructure KW - TIC KW - Testing PY - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-565346 UR - https://www.qi-fokus.de SP - 1 EP - 44 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-56534 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Koch, Claudia A1 - Ladu, Luana A1 - Asna Ashari, Parsa A1 - Blind, K. A1 - Castka, P. T1 - Digitalization in conformity assessment in Croatia - A QI-FoKuS study N2 - This report summarizes findings from the first comprehensive study on digitalization in conformity assessment in Croatia. The reults are based on data from a survey among conformity assessment bodies (CABs) conducted in 2022. It highlights the digital maturity of the organizations, the motives, benefits and obstacles of digital transformation as well as the actual technology trends. This study is part of a global project that covers various other countries (see www.qi-fokus.de). KW - COVID-19 KW - Calibration KW - Certification KW - Conformity assessment KW - Conformity assessment body KW - Digital transformation KW - Digitalization KW - Laboratory KW - Quality infrastructure KW - TIC KW - Testing PY - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-565380 UR - https://www.qi-fokus.de SP - 1 EP - 44 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-56538 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Asna Ashari, Parsa A1 - Blind, K. A1 - Koch, Claudia T1 - Knowledge and technology transfer via publications, patents, standards: Exploring the hydrogen technological innovation system N2 - Clean technologies play a crucial role in reducing greenhouse gas emissions and protecting the climate. Hydrogen is a promising energy carrier and fuel that can be used in many applications. We explore the global hydrogen technological innovation system (TIS) by analyzing the three knowledge and technology transfer channels of publications, patents, and standards. Since the adoption of hydrogen technologies requires trust in their safety,this study specifically also focuses on hydrogen safety. Our results show that general and hydrogen safety research has increased significantly while patenting experienced stagnation. An analysis of the non-patent literature in safety patents shows little recognition of scientific publications. Similarly, publications are underrepresented in the analyzed 75 international hydrogen and fuel cell standards. This limited transfer of knowledge from published research to standards points to the necessity for greater involvement of researchers in standardization. We further derive implications for the hydrogen TIS and recommendations for a better and more impactful alignment of the three transfer channels. KW - Technological innovation system KW - Hydrogen safety KW - Knowledge and technology transfer KW - Publications KW - Patents KW - Standards PY - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-564250 SN - 0040-1625 VL - 187 SP - 1 EP - 14 PB - Elsevier Inc. AN - OPUS4-56425 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Blind, K. A1 - Krüger, M. A1 - Kinne, J. A1 - Mirtsch, Mona ED - Jacobs, K. T1 - Organisation Innovation in the Digital Layer: Exploring the Adoption of the Management System Standard ISO/IEC 27001 N2 - Despite the increasing relevance of cybersecurity for companies’ performance, there is limited research on the adoption of ISO/IEC 27001, an international information security management standard. The aim of our study is to expand this limited body of literature. First, we analyse the influence of companies’ networks on the adoption of ISO/IEC 27001 as an organisational innovation based on firm website data and their hyperlinks, using the entire population of ISO/IEC 27001 certified firms identified via web mining. Second, we validate the method of constructing and analysing companies’ “digital layer” following the call for new methodological approaches to study the organisational adoption of innovations. Our findings reveal that companies' decision to adopt ISO/IEC 27001 increases significantly with their number of linkages to other companies and to those having the same certificate. Finally, their cognitive and organisational distances to linked partners have the expected inverted u-shaped influence on their own adoption decision. T2 - 11th International Conference on Standardisation and Innovation in Information Technology (SIIT 2021) CY - Aachen, Germany DA - 06.09.2021 KW - Information Security KW - Hyperlinks KW - Management system standard KW - Digital Layer PY - 2021 SN - 978-3-95886-421-4 SP - 95 PB - Verlagshaus Mainz GmbH Aachen CY - Mainz AN - OPUS4-54411 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Koch, Claudia A1 - Asna Ashari, Parsa A1 - Mirtsch, Mona A1 - Blind, K. A1 - Castka, P. ED - Jakobs, K. T1 - Impact of the COVID-19 Pandemic on Conformity Assessment: Insights from a Multinational Study N2 - The COVID-19 pandemic has posed new and manifold challenges to organizations and their operations worldwide. Conformity assessment bodies (CABs), such as testing or medical laboratories, certification, and inspection bodies, are also affected by the associated disruptions. Their situation in this crisis is highly relevant, as CABs are essential pillars of the quality infrastructure: Their activities ensure that products and services meet requirements as defined in standards and regulations, thereby contributing to their safety and reliability. Considering the roles and functions of CABs in economy, health, and innovation, the question arises how CABs and their operations were affected by the pandemic and how they responded. To this end, we present the results of an international survey of 986 CABs of all types in Germany, the UK, Italy, and New Zealand. Overall, CABs reported on average a negative development of demand during the pandemic, facing restrictions in all countries. In addition, the pandemic had overall negative impact on the CABs’ investment and innovation activities. However, investments in digital infrastructure were increased as countermeasure, with CABs reporting an increased need for digitalization. Resources relevant to organizational resilience were available to different extents, affecting the speed of response to the challenges of the pandemic. The paper highlights and discusses results from in-depth analyses, which are relevant for policy makers and industry alike. T2 - 25th EURAS Annual Standardisation Conference – Standardisation and Innovation CY - Aachen, Germany DA - 05.09.2021 KW - COVID-19 KW - Corona KW - Crisis KW - Digitalization KW - Laboratory KW - Pandemic KW - Quality infrastructure KW - Conformity assessment KW - Resilience PY - 2021 SN - 978-3-95886-421-4 SP - 379 EP - 398 PB - Verlag Mainz AN - OPUS4-53815 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Asna Ashari, Parsa A1 - Blind, K. ED - Jakobs, K. T1 - An Analysis of the Three Knowledge and Technology Transfer Channels: Publications, Patents, Standards – The Case of Hydrogen Technology N2 - Climate change and the need to reduce greenhouse gas emissions pose tremendous challenges to policymakers, the economy, and society. In this context, the development of clean, low-emission technologies plays a crucial role in mitigating the negative impact of fossil fuels on the climate. Hydrogen is a promising energy carrier and fuel that, thanks to its versatility, can be used in many applications. However, the adoption of hydrogen technology requires sufficient trust in its safety. To proxy the development of hydrogen safety innovations, we provide an analysis along the three knowledge and technology transfer channels of publications, patents, and standards. Our results show that research on hydrogen safety has increased significantly in the last decades, with hydrogen safety patents experiencing a general upward trend between 1980 and 2020, just recently decreasing. However, an analysis of almost 100 international hydrogen and fuel cell standards shows only a small number of references to scientific publications. This apparently limited transfer of knowledge from publications points to the need to optimize the coordination of the three knowledge and technology transfer channels for the future development of hydrogen technology. Based on the exploration of this gap, we recommend that research on the three channels for hydrogen be intensified and that the impact of hydrogen safety technology research and development on their diffusion be investigated. T2 - 25th EURAS Annual Standardisation Conference – Standardisation and Innovation CY - Aachen, Germany DA - 05.09.2021 KW - Hydrogen KW - Fuel Cells KW - Knowledge and Technology Transfer KW - Publications KW - Patents KW - Standards KW - Safety PY - 2021 SN - 978-3-95886-421-4 SP - 1 EP - 20 CY - Mainz AN - OPUS4-53912 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mirtsch, Mona A1 - Blind, K. A1 - Koch, Claudia A1 - Dudek, Gabriele T1 - Information security management in ICT and non-ICT sector companies: A preventive innovation perspective N2 - Despite the growing dependence of companies on information technology and the increasingly negative impact of security incidents worldwide, there is little research on the management of information security at the company level. This paper seeks to expand knowledge on the implementation of an information security management system based on the widely used international standard ISO/IEC 27001. We present motives, experienced impacts, and obstacles related to ISO/IEC 27001 implementation using data from a survey of 125 ISO/IEC 27001 certified companies in Germany. Since adoption rates vary between ICT and non-ICT sector companies, we highlight sector-related variations. We classify the adoption of this standard as a preventive organizational innovation and apply Structural Equation Modeling to unearth explanations for the comparatively low adoption of this management system standard among companies outside the ICT sector. We, therefore, derive recommendations for policymakers, standardization, and certification bodies to foster its diffusion. KW - Information Security KW - ISO/IEC 27001 KW - Management system standard KW - Certification KW - Information security management system (ISMS) KW - Preventive Innovation KW - Resource-based-view KW - Institutional theory PY - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-531037 SN - 0167-4048 VL - 109 IS - 10 SP - 1 EP - 23 PB - Elsevier Ltd. AN - OPUS4-53103 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Koch, Claudia A1 - Ladu, Luana A1 - Asna Ashari, Parsa A1 - Blind, K. A1 - Castka, P. T1 - Digitalization in conformity assessment in Spain - A QI-FoKuS study N2 - This report summarizes findings from the first comprehensive study on digitalization in conformity assessment in Spain. The reults are based on data from a survey among conformity assessment bodies (CABs) conducted in 2022. It highlights the digital maturity of the organizations, the motives, benefits and obstacles of digital transformation as well as the actual technology trends. The study on Spanish CABs is part of a global project that covers various other countries (see www.qi-fokus.de). KW - COVID-19 KW - Calibration KW - Certification KW - Conformity assessment KW - Conformity assessment body KW - Digital transformation KW - Digitalization KW - Laboratory KW - Quality infrastructure KW - TIC KW - Testing PY - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-558465 UR - https://www.qi-fokus.de SP - 1 EP - 44 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-55846 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Ladu, Luana A1 - Koch, Claudia A1 - Asna Ashari, Parsa A1 - Blind, K. A1 - Castka, P. T1 - Digitalization in conformity assessment in Colombia - A QI-FoKuS study N2 - This report summarizes findings from the first comprehensive study on digitalization in conformity assessment in Colombia. The reults are based on data from a survey among conformity assessment bodies (CABs) conducted in 2022. It highlights the digital maturity of the organizations, the motives, benefits and obstacles of digital transformation as well as the actual technology trends. The study on Colombian CABs is part of a global project that covers various other countries (see www.qi-fokus.de). KW - COVID-19 KW - Calibration KW - Certification KW - Conformity assessment KW - Conformity assessment body KW - Digital transformation KW - Digitalization KW - Laboratory KW - Quality infrastructure KW - TIC KW - Testing PY - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-558484 UR - https://www.qi-fokus.de SP - 1 EP - 44 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-55848 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Koch, Claudia A1 - Ladu, Luana A1 - Asna Ashari, Parsa A1 - Blind, K. A1 - Castka, P. T1 - Digitalization in conformity assessment in Ireland - A QI-FoKuS study N2 - This report summarizes findings from the first comprehensive study on digitalization in conformity assessment in Ireland. The reults are based on data from a survey among conformity assessment bodies (CABs) conducted in 2022. It highlights the digital maturity of the organizations, the motives, benefits and obstacles of digital transformation as well as the actual technology trends. The study on Irish CABs is part of a global project that covers various other countries (see www.qi-fokus.de). KW - Quality infrastructure KW - Digitalization KW - Testing KW - Laboratory KW - Certification KW - Conformity assessment KW - Digital transformation KW - TIC KW - Conformity assessment body KW - COVID-19 KW - Calibration PY - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-554877 UR - https://www.qi-fokus.de SP - 1 EP - 44 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-55487 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Koch, Claudia A1 - Ladu, Luana A1 - Asna Ashari, Parsa A1 - Blind, K. A1 - Castka, P. T1 - Digitalization in conformity assessment in Germany - A QI-FoKuS study T1 - Digitalisierung in der Konformitätsbewertung in Deutschland - Eine QI-FoKuS-Studie N2 - This report summarizes findings from the first comprehensive study on digitalization in conformity assessment in Germany. The reults are based on data from a survey among conformity assessment bodies (CABs) conducted in 2022. It highlights the digital maturity of the organizations, the motives, benefits and obstacles of digital transformation as well as the actual technology trends. The study on German CABs is part of a global project that covers various other countries (see www.qi-fokus.de). N2 - Dieser Bericht fasst die Ergebnisse der ersten umfassenden Studie zur Digitalisierung der Konformitätsbewertung in Deutschland zusammen. Die Ergebnisse basieren auf Daten einer Umfrage unter Konformitätsbewertungsstellen (KBS), die 2022 durchgeführt wurde. Sie beleuchten den digitalen Reifegrad der Organisationen, die Motive, Vorteile und Hindernisse der digitalen Transformation sowie die aktuellen Technologietrends. Die Studie zu KBS in Deutschland ist Teil eines globalen Projekts, das verschiedene andere Länder umfasst (siehe www.qi-fokus.de). KW - Quality infrastructure KW - Digitalization KW - Testing KW - Conformity assessment KW - Certification KW - Laboratory KW - Digital transformation KW - TIC KW - Conformity assessment body KW - COVID-19 KW - Calibration KW - Corona KW - Digitalisierung KW - Kalibrierung KW - Konformitätsbewertung KW - Konformitätsbewertungsstelle KW - Labor KW - Prüfung KW - Qualitätsinfrastruktur KW - Zertifizierung KW - Digitale Transformation PY - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-554885 UR - https://www.qi-fokus.de SP - 1 EP - 44 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-55488 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Ladu, Luana A1 - Koch, Claudia A1 - Asna Ashari, Parsa A1 - Blind, K. A1 - Castka, P. T1 - Digitalization in conformity assessment in the Netherlands - A QI-FoKuS study N2 - This report summarizes findings from the first comprehensive study on digitalization in conformity assessment in the Netherlands. The reults are based on data from a survey among conformity assessment bodies (CABs) conducted in 2022. It highlights the digital maturity of the organizations, the motives, benefits and obstacles of digital transformation as well as the actual technology trends. The study on Dutch CABs is part of a global project that covers various other countries (see www.qi-fokus.de). KW - COVID-19 KW - Calibration KW - Certification KW - Conformity assessment KW - Conformity assessment body KW - Digital transformation KW - Digitalization KW - Laboratory KW - Quality infrastructure KW - TIC KW - Testing PY - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-555852 UR - https://www.qi-fokus.de SP - 1 EP - 44 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-55585 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Koch, Claudia A1 - Ladu, Luana A1 - Asna Ashari, Parsa A1 - Blind, K. A1 - Castka, P. T1 - Digitalization in conformity assessment in Latvia - A QI-FoKuS study N2 - This report summarizes findings from the first comprehensive study on digitalization in conformity assessment in Latvia. The reults are based on data from a survey among conformity assessment bodies (CABs) conducted in 2022. It highlights the digital maturity of the organizations, the motives, benefits and obstacles of digital transformation as well as the actual technology trends. The study on Latvian CABs is part of a global project that covers various other countries (see www.qi-fokus.de). KW - COVID-19 KW - Calibration KW - Certification KW - Conformity assessment KW - Conformity assessment body KW - Digital transformation KW - Digitalization KW - Laboratory KW - Quality infrastructure KW - TIC KW - Testing PY - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-554987 UR - https://www.qi-fokus.de SP - 1 EP - 45 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-55498 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Koch, Claudia A1 - Asna Ashari, Parsa A1 - Mirtsch, Mona A1 - Blind, K. A1 - Castka, P. T1 - Impact of the COVID-19 pandemic on accredited conformity assessment bodies: insights from a multinational study N2 - The COVID-19 pandemic posed new and manifold challenges to organizations and their operations worldwide. Conformity assessment bodies (CABs), such as testing or medical laboratories, certification, and inspection bodies, were also affected by the associated disruptions. Their role in this crisis is highly relevant, as CABs are essential pillars of the quality infrastructure: their activities ensure that products and services meet requirements as defined in standards and regulations, thereby contributing to their safety and reliability. The question arises of how CABs and their operations were affected by the pandemic and how they responded. To this end, we present the results of an international survey of 986 CABs of all types in Germany, the UK, Italy, and New Zealand. Overall, CABs reported, on average, a reduction in demand for their services during the pandemic, facing restrictions in all countries. In addition, the pandemic had an overall negative impact on the CABs’ investment and innovation activities. However, investments in digital infrastructure were increased as a countermeasure, with CABs reporting a higher need for digitalization. The paper highlights and discusses results from in-depth analyses relevant to policymakers and industry alike. KW - Quality Infrastructure KW - Digitalization KW - Testing laboratories KW - Conformity assessment KW - Certification KW - Conformity assessment body KW - Corona KW - Covid-19 KW - Resilience PY - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-556396 SP - 1 EP - 14 PB - Springer AN - OPUS4-55639 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Koch, Claudia A1 - Ladu, Luana A1 - Asna Ashari, Parsa A1 - Blind, K. A1 - Castka, P. T1 - Digitalization in conformity assessment in Brazil - A QI-FoKuS study N2 - This report summarizes findings from the first comprehensive study on digitalization in conformity assessment in Brazil. The reults are based on data from a survey among conformity assessment bodies (CABs) conducted in 2022. It highlights the digital maturity of the organizations, the motives, benefits and obstacles of digital transformation as well as the actual technology trends. The study on Brazilian CABs is part of a global project that covers various other countries (see www.qi-fokus.de). KW - COVID-19 KW - Calibration KW - Certification KW - Conformity assessment KW - Conformity assessment body KW - Digital transformation KW - Digitalization KW - Laboratory KW - Quality infrastructure KW - TIC KW - Testing PY - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-556330 UR - https://www.qi-fokus.de SP - 1 EP - 44 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-55633 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Koch, Claudia A1 - Ladu, Luana A1 - Asna Ashari, Parsa A1 - Blind, K. A1 - Castka, P. T1 - Digitalization in conformity assessment in Italy - A QI-FoKuS study N2 - This report summarizes findings from the first comprehensive study on digitalization in conformity assessment in Italy. The reults are based on data from a survey among conformity assessment bodies (CABs) conducted in 2022. It highlights the digital maturity of the organizations, the motives, benefits and obstacles of digital transformation as well as the actual technology trends. The study on Italian CABs is part of a global project that covers various other countries (see www.qi-fokus.de). KW - Quality infrastructure KW - Conformity assessment KW - Conformity assessment body KW - Laboratory KW - Testing KW - Certification KW - Calibration KW - Digitalization KW - Digital transformation KW - COVID-19 KW - TIC PY - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-553708 UR - https://www.qi-fokus.de SP - 1 EP - 44 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-55370 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mangelsdorf, Axel A1 - Blind, K. T1 - Motives to standardize: Empirical evidence from Germany N2 - In this paper, we identify the strategic motives of German manufacturing companies in the electrical engineering and machinery industry to be involved in standards development organizations. First, we present the general motives for the formation of strategic alliances and relate them to specific standardization motives. Then, we identify pursuing specific company interests, solving technical problems, knowledge seeking, influencing regulation, and facilitating market access as motives to standardize by means of factor analysis. In a second step, we test hypotheses on the relationship between the importance of strategic motives and firm level variables, e.g. R&D intensity, innovation activities, and firm size. The results reveal that firms in electric engineering and machinery have a particularly strong interest in ensuring industry-friendly design of regulations, which can be achieved by standards. Moreover, the results confirm that small firms also from these two sectors are active in standardization alliances to access knowledge from other involved stakeholders. KW - Factor analysis KW - Standardization KW - Strategic alliances KW - Knowledge spillovers KW - Market access KW - Regulation KW - Innovation KW - R&D PY - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-364586 SN - 0166-4972 VL - 48-49 SP - 13 EP - 24 PB - Elsevier Science B.V. CY - Amsterdam, Netherlands AN - OPUS4-36458 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mirtsch, Mona A1 - Kinne, J. A1 - Blind, K. T1 - Exploring the Adoption of the International Information Security Management System Standard ISO/IEC 27001: A Web Mining-Based Analysis N2 - In the light of digitalization and recent EU policy initiatives, information is an important asset that organizations of all sizes and from all sectors should secure. However, in order to provide common requirements for the implementation of an information security management system, the internationally well-accepted ISO/IEC 27001 standard has not shown the expected growth rate since its publication more than a decade ago.In this article, we apply web mining to explore the adoption of ISO/IEC 27001 through a series of 2664 out of more than 900 000 German firms from the Mannheim Enterprise Panel dataset that refers to this standard on their websites. As a result, we present a “landscape” of ISO/IEC 27001 in Germany, which shows that firms not only seek certifications themselves but often refer on their websites to partners who are certified instead. Consequently, we estimate a probit model and find that larger and more innovative firms are more likely to be certified to ISO/IEC 27001 and that almost half of all certified firms belong to the information and communications technology (ICT) service sector. Based on our findings, we derive implications for policymakers and management and critically assess the suitability of web mining to explore the adoption of management system standards. KW - Adoption KW - Information security KW - Management system standards KW - Standards KW - Web mining PY - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-513284 VL - 68 IS - 1 SP - 87 EP - 100 AN - OPUS4-51328 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Koch, Claudia A1 - Blind, K. T1 - Towards Agile Standardization: Testbeds in Support of Standardization for the IIoT N2 - The Industrial Internet of Things (IIoT) poses multiple challenges to traditional standardization, due to the complexity, dynamics, and accelerating speed of technological progress. The need for a timely availability of standards calls for new approaches and tools to enhance standardization processes for smart manufacturing. Industry and standards development organizations worldwide are seeking new solutions. Testbeds have been acknowledged in innovation policy as a powerful tool for knowledge transfer and the further development of emerging technologies. Lately, they have also attracted increasing attention from the standardization perspective as a promising tool for a more agile standards development process. Proponents of such testbeds expect them to support standardization by providing validated solutions and accelerating the processes to meet the growing demands for faster standardization without any detriment to quality. In an explorative, qualitative approach this article is the first to investigate the operation and impact of testbeds in standardization processes based on a multiple case study on testbeds implemented worldwide in the context of the IIoT. KW - Testumgebung KW - Reallabor KW - Normung KW - Standards KW - Standardization KW - Industrie 4.0 KW - Smart manufacturing KW - Industrial internet of things KW - Agility KW - Agile PY - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-513300 VL - 68 IS - 1 SP - 59 EP - 74 AN - OPUS4-51330 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Koch, Claudia A1 - Blind, K. ED - Jakobs, K. ED - Morone, P. T1 - Testbeds for standardization in the IIoT N2 - In the paper, we discuss the role and impacts of testbeds in standardization for the industrial internet of things. Based on a multiple case study, four different approaches were identified followed in the testbeds with regard to their standardization activities. T2 - 24th EURAS Annual Standardisation Conference CY - Rom, Italy DA - 13.06.2019 KW - IIoT KW - Industrie 4.0 KW - Normen KW - Standards KW - Normung KW - Standardization KW - Agile KW - Testbed PY - 2019 SN - 978-3-95886-282-1 SP - 215 EP - 234 PB - Verlagshaus Mainz CY - Aachen AN - OPUS4-49121 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mirtsch, Mona A1 - Blind, K. ED - Jacobs, K. ED - Morone, P. T1 - Exploring the Diffusion of an ISMS Standard N2 - This paper introduces and discusses the applicability of Web Mining of Firm Websites to explore the Diffusion of Management System Standards using the example of an ISMS Standard. T2 - EURAS Conference CY - Rome, Italy DA - 13.06.2019 KW - Management System Standard KW - Information Security KW - Web Mining PY - 2019 SN - 978-3-95886-282-1 VL - 24 SP - 329 EP - 348 PB - Verlagshaus Mainz GmbH CY - Aachen, Germany AN - OPUS4-49031 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mirtsch, Mona A1 - Pohlisch, Jakob A1 - Blind, K. T1 - International Diffusion of the Information Security Management System Standard ISO/IEC 27001: Exploring the Role of Culture N2 - In the wake of digitalization, organizations are increasingly exposed to risks associated with security breaches and must take measures to preserve the confidentiality, integrity, and availability of information, and to ensure business continuity. The international standard ISO/IEC 27001 assists organizations in setting up, maintaining and continuously improving their information security management systems. However, despite high growth rates, its international diffusion rates are quite heterogeneous. This paper explores why the diffusion of the international management system standard ISO/IEC 27001 differs across countries. We classify the adoption of ISO/IEC 27001 as a ‘preventive organizational innovation’ and draw from diffusion studies of other management system standards and information security research to develop a set of hypotheses. These relate to the impact of cultural dimensions and national ICT development. We use a negative binomial regression model with panel data covering 57 countries over a 12-year period from 2006 to 2017 to test our hypotheses. We find that the cultural dimensions future orientation, power distance, and institutional collectivism as well as high ICT development are driving factors for the diffusion of ISO/IEC 27001. We derive policy recommendations and avenues for future research. T2 - Twenty-Eighth European Conference on Information Systems (ECIS2020) – A Virtual AIS Conference CY - Online meeting DA - 15.06.2020 KW - Information security KW - International diffusion KW - Standards KW - Management system standards KW - ISO/IEC 27001 KW - Preventive innovations KW - Culture KW - GLOBE KW - ICT development index PY - 2020 SP - RP 88 AN - OPUS4-50919 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Mirtsch, Mona A1 - Koch, Claudia A1 - Dudek, Gabriele A1 - Blind, K. T1 - Die Nutzung und Wirkung genormter Managementsysteme N2 - Das Ziel der Initiative QI-FoKuS ist es, eine Datenbasis für neue wissenschaftliche Erkenntnisse zu Einflussfaktoren und Effekten in der Konformitätsbewertung und Akkreditierung zu schaffen. Ende 2019 wurden in einer ersten Online-Erhebung Unternehmen verschiedener Branchen und Größenklassen in Deutschland zur Nutzung von Managementsystemen und ihren Wirkungen befragt. Diese umfasste weit verbreitete genormte Managementsysteme wie ISO 9001 und ISO 14001 genauso wie bisher wenig untersuchte Systeme wie die ISO 50001 oder ISO/IEC 27001. Es konnten 180 Fragebögen für die vorliegende Studie ausgewertet werden. KW - QI-FoKuS KW - Managementsysteme KW - ISO 9001 KW - ISO/IEC 27001 KW - ISO 50001 KW - ISO 14001 KW - Zertifizierung KW - Konformitätsbewertung KW - Akkreditierung PY - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-510831 SN - 978-3-9818564-3-9 VL - 1 SP - 1 EP - 44 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-51083 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Koch, Claudia A1 - Mirtsch, Mona A1 - Blind, K. T1 - CORONA-MONITOR - Auswirkungen der Corona-Pandemie auf Konformitätsbewertung und Konformitätsbewertungsstellen in Deutschland N2 - Die Studie fasst Ergebnisse einer Befragung von Konformitätsbewertungsstellen zu deren Lage und den Aussichten während der Corona-Pandemie zusammen. Besondere Schwerpunkte wurden auf die wirtschaftlichen Auswirkungen und die Arbeitsfähigkeit, aber auch auf die Resilienz und die Wirkungen auf die Digitalisierung gelegt. KW - Corona KW - COVID-19 KW - Resilienz KW - Qualitätsinfrastruktur KW - Prüfung KW - Zertifizierung KW - Kalibrierung KW - Inspektion KW - Labor KW - Laboratorium KW - Studie KW - Befragung KW - Digitalisierung PY - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-518276 UR - www.qi-fokus.de VL - 3 SP - 1 EP - 26 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-51827 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Mirtsch, Mona A1 - Koch, Claudia A1 - Dudek, Gabriele A1 - Blind, K. T1 - Die Nutzung und Wirkung der Norm ISO/IEC 27001 für Informationssicherheit in Unternehmen in Deutschland N2 - Das Ziel der Initiative QI-FoKuS ist es, eine Datenbasis für neue wissenschaftliche Erkenntnisse zu Einflussfaktoren und Effekten in der Konformitätsbewertung und Akkreditierung zu schaffen und hierbei insbesondere auch auf aktuelle Trends und Entwicklungen einzugehen. Von Januar bis März 2020 wurden in einer Online-Erhebung Unternehmen verschiedener Branchen und Größenklassen in Deutschland zur Nutzung und den Wirkungen ihres zertifizierten Managementsystems für Informationssicherheit nach ISO/IEC 27001 befragt. Es konnten 125 vollständig ausgefüllte Fragebögen für die vorliegende Studie ausgewertet werden. KW - Managementsysteme KW - ISO/IEC 27001 KW - Informationssicherheit KW - Zertifizierung KW - Konformitätsbewertung KW - Akkreditierung KW - QI-FoKuS PY - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-517922 VL - 2 SP - 1 EP - 28 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-51792 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Koch, Claudia A1 - Mirtsch, Mona A1 - Blind, K. T1 - Resilient gegen Corona? Auswirkungen der Corona-Pandemie auf Konformitätsbewertungsstellen N2 - Covid 19 stellt Gesellschaft und Wirtschaft vor immense Herausforderungen – auch die Konformitätsbewertungsbranche ist betroffen. Die Bundesanstalt für Materialforschung und -prüfung (BAM) hat gemeinsam mit der TU Berlin und dem Fraunhofer ISI die Auswirkungen der Pandemie auf die wirtschaftliche und operative Lage von Konformitätsbewertungsstellen in Deutschland untersucht. Dabei standen auch die Digitalisierung sowie die Resilienz der Branche im Fokus. KW - Corona KW - Konformitätsbewertungsstellen KW - Resilienz KW - Qualitätssicherung KW - Qualitätsinfrastruktur KW - COVID-19 KW - Zertifizierung KW - Digitalisierung KW - Konformitätsbewertung PY - 2021 VL - 66 IS - 01/2021 SP - 36 EP - 39 PB - Carl Hanser CY - München AN - OPUS4-51974 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Nisi, A. A1 - Koch, Claudia A1 - Mirtsch, Mona A1 - Blind, K. T1 - Effetti della pandemia COVID-19 sulle attività di valutazione della conformità svolte da organismi e laboratori accreditati in Italia N2 - Die Studie fasst Ergebnisse einer Befragung von Konformitätsbewertungsstellen in Italien zu deren Lage und den Aussichten während der Corona-Pandemie zusammen. Besondere Schwerpunkte wurden auf die wirtschaftlichen Auswirkungen und die Arbeitsfähigkeit, aber auch auf die Resilienz und die Wirkungen auf die Digitalisierung gelegt. N2 - Lo scoppio della pandemia da Covid-19 ha travolto Italia a inizio anno e i suoi effetti sull’economia sono stati particolarmente pesanti. Proprio per analizzare gli effetti della pandemia sul mercato della valutazione della conformità, lo scorso settembre Accredia, in collaborazione con l’Istituto Federale tedesco della Ricerca e del Collaudo dei Materiali (BAM), la Technische Universität di Berlino e l’Istituto Fraunhofer ISI, ha condotto un’indagine presso gli organismi e i laboratori accreditati in Italia. KW - Corona KW - Konformitätsbewertungsstellen KW - Resilienz KW - COVID-19 KW - Qualitätsinfrastruktur KW - Zertifizierung KW - Kalibrierung KW - Digitalisierung KW - Konformitätsbewertung KW - Laboratorium KW - Prüfung PY - 2020 UR - https://www.accredia.it/pubblicazione/corona-monitor-effetti-della-pandemia-da-covid-19-sulle-attivita-accreditate/ SP - 1 EP - 22 CY - Rom, Italien AN - OPUS4-51975 LA - ita AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Ladu, Luana A1 - Koch, Claudia A1 - Ashari, Parsa Asna A1 - Blind, K. A1 - Castka, P. T1 - Digitalization in conformity assessment in Africa N2 - This report summarizes findings from the first comprehensive study on digitalization in conformity assessment in Africa. The reults are based on data from a survey among conformity assessment bodies (CABs) conducted in 2023. It highlights the digital maturity of the organizations, the motives, benefits and obstacles of digital transformation as well as the actual technology trends. This study is part of a global project that covers various other countries (see www.qi-fokus.de). KW - Testing KW - COVID-19 KW - Calibration KW - Certification KW - Conformity assessment KW - Conformity assessment body KW - Digital transformation KW - Digitalization KW - Laboratory KW - TIC KW - Quality infrastructure PY - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-588625 UR - https://www.qi-fokus.de SP - 1 EP - 45 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-58862 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Asna Ashari, Parsa A1 - Weiss, D. A1 - Blind, K. ED - Jakobs, K. T1 - Fuel-cell Vehicles in Relation to Electric and Internal Combustion Engine Vehicles – An Analysis of Technology Relations based on Publications, Patents, Standards N2 - Against the backdrop of the sustainability transition of economies worldwide, decarbonizing road traffic is high on the agenda. This has focused the interest of policymakers and automobile manufacturers on sustainable, zero-emission powertrain technologies. Among these technologies, hydrogen fuel cell (FC) vehicles have a positive climate impact, given that their hydrogen is produced from renewable energy. However, FC vehicles have not yet gained significant market shares. Therefore, based on the technological innovation systems (TIS) approach, this study analyzes how FC vehicles are influenced by EVs and internal combustion engine (ICE) vehicles as their context structures. To operationalize the technology relations between our focal FC-TIS and its context structures, we use the sum of international publications, patents filed at the European Patent Office, and international ISO and IEC standards as indicators for each technology. Our results show that the FC-TIS is dominated by its context structures, especially regarding commercially relevant patents and international standards. Therefore, we conclude that the FC-TIS is in its formative life-cycle phase and identify the need for intensified patenting and standardization in relation to the competing EVs and ICE vehicles. T2 - 27th EURAS Annual Standardisation Conference & 12th International Conference on Standardisation and Innovation in Information Technology (SIIT) - (Responsible) Standardisation for Smart Systems CY - Aachen, Germany DA - 28.06.2023 KW - Fuel cell vehicles KW - Patents KW - Publications KW - Standards KW - Technological innovation system (TIS) KW - Technology interaction PY - 2023 SN - 978-3-95886-491-7 SP - 1 EP - 20 PB - Verlagshaus Mainz CY - Aachen AN - OPUS4-57870 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Ladu, Luana A1 - Koch, Claudia A1 - Asna Ashari, Parsa A1 - Blind, K. A1 - Castka, P. T1 - Weltweiter Status und Trends in der Digitalen Transformation der Konformitätsbewertung N2 - Die fortschreitende digitale Transformation der Wirtschaft und die zunehmende Komplexität vernetzter Produkte und Anwendungen rücken die Digitalisierung in den Fokus von Konformitätsbewertungsstellen (KBS). Die Nachfrage nach Konformitätsbewertungsdienstleistungen im Einklang mit Innovationen, neuen Technologien und Prozessen steigt. Dies stellt Prüf- und Kalibrierlaboratorien, Inspektions- und Zertifizierungsstellen und andere KBS vor neue Herausforderungen. Der Fortschritt digitaler Technologien und Anwendungen eröffnet diesen Organisationen gleichzeitig neue Chancen. Diese Studie ist die erste, die das Thema der "Digitalisierung in der Konformitätsbewertung" umfassend erforscht. Sie stützt sich auf Daten aus einer Online-Umfrage unter KBS weltweit (14 Länder und Westafrika als Region mit sieben Ländern). KW - Testing KW - COVID-19 KW - Calibration KW - Certification KW - Conformity assessment KW - Conformity assessment body KW - Digital transformation KW - Digitalization KW - Laboratory KW - Quality infrastructure KW - TIC PY - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-597659 UR - https://www.qi-fokus.de SP - 1 EP - 53 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-59765 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -