TY - GEN A1 - Spaltmann, Dirk A1 - Löhr, Manuel A1 - Binkowski, Sigrid A1 - Kelling, Norbert A1 - Woydt, Mathias T1 - Können harte DLC-Schichten die Wälzbeständigkeit von weichen Stählen erhöhen? T2 - Tribologie-Fachtagung 2004 CY - Göttingen, Deutschland DA - 2004-09-27 PY - 2004 SN - 3-00-015053-6 SP - 1(?) EP - 10(?) PB - Ges. für Tribologie CY - Moers AN - OPUS4-5143 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Löhr, Manuel A1 - Spaltmann, Dirk A1 - Binkowski, Sigrid A1 - Santner, Erich A1 - Woydt, Mathias T1 - In situ Acoustic Emission for wear life detection of DLC coatings during slip-rolling friction N2 - Different diamond-like carbon (DLC) coatings on a steel substrate (100Cr6) were tested under slip-rolling friction conditions against uncoated counter bodies of the same steel. The initial maximum Hertzian pressure was varied in a range of P0 = 1.5–2.3 GPa. The friction tests were carried out under dry conditions and with an unadditivated paraffin oil as lubricant. It could be shown that the thickness of the coatings affects the respective wear life. Further, a very important factor for the wear life of a coating under lubricated slip-rolling conditions is the roughness of the surface of the respective counterbody. The wear life tests were monitored by recording in situ the Acoustic Emission (AE) signals. Some causes for a high AE activity could be identified. KW - Wear life KW - Slip-rolling friction KW - Diamond-like carbon (DLC) KW - Acousitc Emission KW - Lubircation KW - Roughness PY - 2006 DO - https://doi.org/10.1016/j.wear.2005.03.009 SN - 0043-1648 VL - 260 IS - 4-5 SP - 469 EP - 478 PB - Elsevier CY - Amsterdam AN - OPUS4-12064 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Binkowski, Sigrid T1 - Gefügecharakterisierung der austenitischen FeCrNi-Legierung 1.4876 nach Reibbeanspruchung bei 37 K T2 - Metallographie-Tagung 2003 CY - Berlin, Germany DA - 2003-09-17 PY - 2003 AN - OPUS4-3437 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Löhr, Manuel A1 - Spaltmann, Dirk A1 - Binkowski, Sigrid A1 - Woydt, Mathias T1 - Einfluss der Topographie von DLC-Schichten auf deren Verhalten unter geschmierter Wälzbeanspruchung KW - Diamant DLC KW - 100Cr6 KW - Wälzen KW - Paraffinöl KW - Topographie KW - Rasterkraftmikroskop PY - 2004 SN - 0724-3472 VL - 51 IS - 6 SP - 18 EP - 26 PB - Expert Verlag CY - Renningen AN - OPUS4-5142 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Binkowski, Sigrid A1 - Woydt, Mathias A1 - Dietrich, E. T1 - Durcissement inhabituel de l'acier 100Cr6 dans un roulement à rouleaux de céramique hybride défectueux N2 - Une analyse de défaut métallographique a été accomplie sur un palier hybride céramique défectueux afin de déterminer la cause du défaut. PY - 2005 UR - http://www.struers.com/resources/elements/12/79042/e-Structure%208F.pdf IS - e-8 SP - 2 EP - 5 PB - Struers CY - Willich AN - OPUS4-15498 LA - fra AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Binkowski, Sigrid A1 - Pahl, Regina A1 - Woydt, Mathias T1 - Comparing preparation techniques using microstructural images of ceramic materials N2 - The article describes different materialographic preparation techniques and shows images of a large variety of different types of ceramics obtained using different examination methods. PY - 2002 UR - http://www.struers.com/resources/elements/12/3698/39art2.pdf IS - 39 SP - 8 EP - 19 PB - Struers CY - Willich AN - OPUS4-24077 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Scheibe, Maximilian A1 - Binkowski, Sigrid A1 - Benemann, Sigrid A1 - Saliwan Neumann, Romeo T1 - Comparing different preparation techniques for the characterisation of niobium carbides N2 - Of the up to 85.000 tons of niobium that are produced at the present, 90% are used as a property defining micro alloying element [1,2] in: a. High- and highest strength alloys for car bodies, b. Structural steels in the construction industry and, c. Steels for pipelines and the petrochemical industry, whereby it is mostly added for alloying in the ränge of 80-250 ppm. PY - 2014 IS - 19 SP - 1 EP - 12 AN - OPUS4-32432 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wägner, Yannick A1 - Binkowski, Sigrid A1 - Woydt, Mathias T1 - Charakterisierung von Hartstoffphasen in Gefüge N2 - Der Beitrag handelt von der Verbesserung der Verschleißbeständigkeit von Hartstoffphasen in Metal Matrix Composites (MMC), Hartgusslegierungen, Hadfield-Stählen oder Werkzeugstählen. T2 - 15. International Metallographie-Tagung CY - Leoben, Asutria DA - 19.09.2018 KW - Verschleißbeständigkeit KW - Hartstoffphasen KW - NbC PY - 2018 SN - 978-3-88355-416-7 VL - 52 SP - 133 EP - 138 PB - DGM - INVENTUM GmbH CY - Sankt Augustin AN - OPUS4-46056 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Binkowski, Sigrid A1 - Hübner, Wolfgang A1 - Aßmus, Kristin A1 - Benemann, Sigrid A1 - Österle, Werner ED - Portella, Pedro Dolabella T1 - Charakterisierung des Gefüges der austenitischen FeCrNi-Legierung 1.4876 nach Reibbeanspruchung bei 37 K T2 - 37. Metallographie-Tagung CY - Berlin, Deutschland DA - 2003-09-17 PY - 2004 SN - 3-88355-322-0 SN - 0343-3579 N1 - Serientitel: Sonderbände der praktischen Metallographie – Series title: Sonderbände der praktischen Metallographie IS - 35 SP - 213 EP - 218 PB - Werkstoff-Informationsges. CY - Frankfurt AN - OPUS4-3420 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Binkowski, Sigrid T1 - Charakterisierung des Gefüges der austenitischen FeCrNi-Legierung 1.4876 nach Reibbeanspruchung bei 37 K T2 - 37. Metallographie-Tagung 2003 CY - Berlin, Germany DA - 2003-09-17 PY - 2003 AN - OPUS4-4950 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -