TY - CONF A1 - Beck, Uwe A1 - Lange, Thorid A1 - Hielscher, Stefan A1 - Rietz, Uwe A1 - Lerche, D. A1 - Pfuch, A. T1 - Multiple-sample approach for bonding and testing: validation of bonding strength of adhesive-bonded joints and adhesive tapes T2 - EURADH 2016 Adhesion ´16 N2 - The multiple-sample approach by means of centrifugal adhesion testing (CAT-technology) allows the determination of bonding strength of adhesive-bonded joints on a statistical basis of up to eight samples. Therefore, it is obvious to ensure the continuous handling and identical processing of an octet of samples within the entire process chain of wet-chemical cleaning, plasma-chemical pre-treatment, bonding of samples, and testing of bonding strength. Within the multiple-sample bonding set-up (MPKV-technology) a defined bonding pressure can be adjusted regardless the actual number of samples. A comparison of single- and multiple-sample approach is made for bonding strength of selected adhesives, double-sided adhesive tapes and different material combinations [stainless steel (V2A) vs. stainless steel, polyamide (PA), or polypropylene (PP)]. It is shown that both technologies improve reliability of results T2 - EURADH 2016 Adhesion ´16 CY - Glasgow, UK DA - 21.09.2016 KW - Multiple-sample bonding KW - Multiple-sample testing KW - Bonding strength KW - Adhesives and adhesive tapes PY - 2016 SP - 162 EP - 166 AN - OPUS4-37588 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beck, Uwe A1 - Hielscher, Stefan A1 - Lange, Thorid A1 - Weise, Matthias A1 - Kittler-Packmor, Kai A1 - Rietz, U. A1 - Lerche, D. A1 - Pfuch, A. T1 - Mehr-Proben-Konzept zum Kleben und Prüfen: Validierung von Klebverbunden im OKTETT T2 - 10. ThGOT Thementage Grenz- und Oberflächentechnik mit 4. Optik-Kolloquium (Proceedings) T2 - 10. ThGOT Thementage Grenz- und Oberflächentechnik mit 4. Optik-Kolloquium CY - Leipzig, Germany DA - 2014-09-02 KW - Zentrifugentechnologie KW - Klebfestigkeit KW - Haftfestigkeit KW - Mehr-Proben-Prüfen/Kleben PY - 2014 SP - BA04, 1 EP - 2 AN - OPUS4-31313 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Pfuch, A. A1 - Beck, Uwe A1 - Lange, Thorid A1 - Rietz, U. A1 - Küzün, B. A1 - Twardygrosz, R. T1 - Wie Klebungen einfacher validiert werden können JF - Adhäsion N2 - Die Bestimmung der Haftfestigkeit von Lackierungen, Beschichtungen oder Klebungen ist wichtig für die Beurteilung von entsprechenden Fertigungsabläufen. Unter Verwendung einer neuen Zentrifugentechnik wurde jetzt ein neues Mehr-Proben-Konzept zur schnellen Validierung von Klebverbindungen entwickelt. KW - Klebfestigkeit KW - Haftfestigkeit KW - Mehr-Proben-Vorbehandeln/Kleben/Prüfen PY - 2015 SN - 0001-8198 VL - 9 SP - 44 EP - 52 PB - Vieweg CY - Wiesbaden AN - OPUS4-34282 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -