TY - CONF A1 - Beck, Matthias A1 - Eichler, Thorsten A1 - Jonas, Bernhard T1 - Systemparameter und Eigenkorrosion T2 - Tagung der DFG-Forschergruppe - Stand Teilprojekt A1 CY - Aachen, Germany DA - 2005-06-01 PY - 2005 AN - OPUS4-11093 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Isecke, Bernd A1 - Beck, Matthias ED - Betoniyhdistys, S. T1 - Experimental investigations on the propagation of reinforcement corrosion T2 - European Symposium on Service Life and Serviceability of Concrete Structures (ESCS-2006) CY - Espoo, Finland DA - 2006-06-12 KW - Concrete formulas KW - Corrosion propagation KW - Electrochemical measurements KW - Polarisation resistance PY - 2006 SN - 952-507579-6 SP - 276 EP - 281 PB - Concrete Assoc. of Finland CY - Helsinki AN - OPUS4-13523 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Beck, Matthias A1 - Burkert, Andreas A1 - Isecke, Bernd ED - Stark, J. T1 - Modellierung von Bewehrungskorrosion - Betontechnologische Einflüsse auf elektrochemische Parameter T2 - 16. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 2006-09-20 KW - Korrosion von Stahl in Beton KW - Zement-, Chlorid-, Wasser/Bindemitteleinfluss KW - Potentialverlauf KW - Polarisationswiderstand PY - 2006 SN - 3-00-018263-2 IS - 1 SP - 1-1199 - 1-1206 PB - Bauhaus-Univ. CY - Weimar AN - OPUS4-13525 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beck, Matthias A1 - Rübner, Katrin A1 - Burkert, Andreas T1 - Einsatz der Quecksilberporosimetrie zur Charakterisierung von Feinkornbetonen für elektrochemische Untersuchungen T2 - XIII. Workshop über die Charakterisierung von feinteiligen und porösen Festkörpern CY - Bad Soden, Germany DA - 2006-11-14 PY - 2006 AN - OPUS4-13573 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beck, Matthias A1 - Jonas, Bernhard A1 - Oelrich, Gerhard T1 - Zwischenbericht DFG-Forschungsvorhaben 537 T2 - Treffen der DFG-Forschergruppe CY - Heligoland, Germany DA - 2006-06-20 PY - 2006 AN - OPUS4-12590 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beck, Matthias A1 - Burkert, Andreas A1 - Isecke, Bernd T1 - Zwischenbericht Teilprojekt A1: Systemparameter und Eigenkorrosion T2 - DFG-Forschergruppentreffen CY - Munich, Germany DA - 2006-11-02 PY - 2006 AN - OPUS4-13897 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beck, Matthias A1 - Isecke, Bernd T1 - Teilprojekt A1: Systemparameter und Eigenkorrosion T2 - DFG-Forschergruppentreffen CY - Munich, Germany DA - 2005-01-13 PY - 2005 AN - OPUS4-13898 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Isecke, Bernd A1 - Beck, Matthias A1 - Burkert, Andreas A1 - Lehmann, Jens A1 - Faulhaber, Armin T1 - Dauerhaftigkeitsbemessung von Stahlbetonbauteilen auf Bewehrungskorrosion - Teil 1: Systemparameter der Bewehrungskorrosion - Ermittlung der Systemparameter und quantitative Bewertung der Eigenkorrosion auf den Korrosionsfortschritt an depassiviertem Bewehrungsstahl PY - 2012 SN - 978-3-410-65221-2 SN - 0171-7197 IS - 601 / Beitrag 2 SP - 19 EP - 57 PB - Beuth CY - Berlin AN - OPUS4-27571 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beck, Matthias A1 - Isecke, Bernd T1 - Experimental investigations on the propagation of reinforcement corrosion T2 - European Symposium on Service Life and Serviceability of Concrete Structures CY - Helsinki, Finland DA - 2006-06-12 PY - 2006 AN - OPUS4-14991 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beck, Matthias A1 - Burkert, Andreas A1 - Isecke, Bernd T1 - Teilprojekt A1: Systemparameter und Eigenkorrosion T2 - 16. ibausil 2006 CY - Weimar, Germany DA - 2006-09-20 PY - 2006 AN - OPUS4-14989 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beck, Matthias A1 - Eichler, Thorsten A1 - Isecke, Bernd T1 - Subproject A4: System Parameters and Self-Corrosion T2 - Eurocorr 2006 CY - Maastricht, Netherlands DA - 2006-09-24 PY - 2006 AN - OPUS4-14990 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beck, Matthias A1 - Isecke, Bernd T1 - System parameters and self-corrosion T2 - Eurocorr 2007 CY - Freiburg, Germany DA - 2007-09-09 PY - 2007 AN - OPUS4-15882 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beck, Matthias A1 - Burkert, Andreas A1 - Lehmann, Jens T1 - Korrosionsuntersuchungen an Stahlbeton - etablierte und neuartige Möglichkeiten T2 - 21. Sitzung des GfKORR-Arbeitskreises "Betriebliche kontinuierliche Korrosionsüberwachung - Corrosion Monitoring" und 17. Sitzung des GfKORR-Arbeitskreises "Prüf- und Untersuchungsverfahren", Institut für Instandhaltung und Korrosionsschutztechnik gGmbH CY - Iserlohn, Germany DA - 2007-09-26 PY - 2007 AN - OPUS4-15883 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beck, Matthias A1 - Goebbels, Jürgen A1 - Burkert, Andreas T1 - Monitoring of corrosion processes in chloride contaminated mortar by X-ray tomography T2 - 1st International Conference CORROSION and Material Protection CY - Prague, Czech Republic DA - 2007-10-01 PY - 2007 AN - OPUS4-15884 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beck, Matthias A1 - Goebbels, Jürgen A1 - Burkert, Andreas T1 - Monitoring of Corrosion Processes in Chloride Contaminated Mortar by X-Ray Tomography KW - Self-corrosion KW - X-ray tomography KW - Reinforcement KW - Concrete parameters KW - Metallographic section PY - 2007 SN - 978-80-903933-0-1 SP - 1 EP - 6 (Paper 012) PB - SVUOM CY - Prag AN - OPUS4-15894 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Beck, Matthias A1 - Rübner, Katrin A1 - Mietz, Jürgen ED - Ravinda K. Dhir, ED - Tom A. Harrison, ED - Li Zheng, ED - Sivakumar Kandasami, T1 - Experimental investigation of propagation of reinforcement corrosion T2 - Concrete Durability: Achievement and Enhancement, International Conference CY - Dundee, Scotland, UK DA - 2008-07-08 KW - Reinforced concrete KW - Electrochemical parameters KW - Self-corrosion KW - Damage symptoms KW - Fly ash KW - Mercury intrusion measurements KW - Pore structure KW - Pozzolan PY - 2008 SN - 978-1-84806-039-5 IS - EP88 SP - 83 EP - 94 PB - IHS BRE Press AN - OPUS4-18312 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beck, Matthias A1 - Eichler, Thorsten A1 - Oelrich, Gerhard T1 - Systemparameter der Eigen- und Elementkorrosion T2 - Tagung der DFG-Forschergruppe-Stand Teilprojekt A1 CY - Karlsruhe, Germany DA - 2005-12-01 PY - 2005 AN - OPUS4-11422 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beck, Matthias A1 - Goebbels, Jürgen A1 - Meinel, Dietmar A1 - Burkert, Andreas ED - M.G. Alexander, ED - H.-D. Beushausen, ED - F. Dehn, ED - P. Moyo, T1 - DFG Research Group 537: Modelling reinforcement corrosion - Observation and monitoring of self-corrosion processes in chloride contaminated mortar by X-ray tomography T2 - 2nd International Conference on Concrete Repair, Rehabilitation and Retrofitting CY - Cape Town, South Africa DA - 2008-11-24 KW - Self-corrosion KW - X-ray tomography KW - Reinforcement KW - Concrete parameters KW - Metallographic section KW - Steel surface PY - 2009 SN - 978-0-415-46850-3 SP - 187 EP - 188 PB - CRC Press CY - Boca Raton AN - OPUS4-18438 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beck, Matthias A1 - Rübner, Katrin A1 - Burkert, Andreas T1 - Einsatz der Quecksilberporosimetrie zur Charakterisierung von Feinkornbetonen für elektrochemische Untersuchungen N2 - Im Rahmen eines DFG-Forschungsvorhabens (FOR 537) wird ein Teilprojekt an der BAM bearbeitet. Ziel dieser Arbeit ist die quantitative Beschreibung und Bewertung des Korrosionsfortschrittes an Stahlproben mit kleinen Kathodenflächen (Eigenkorrosion) mittels elektrochemischer Messungen. Für die Untersuchungen wurden Betonproben mit eingebetteten Stahlelektroden hergestellt. Dabei wurden gezielt betontechnologische Parameter variiert. Dabei ist der Beton als Elektrolyt zu betrachten. Nach bestimmten Zeitintervallen werden die Betonproben aufgebrochen und die eingebetteten Stahlelektroden durch visuelle Inspektion und anschließende Bestimmung des Masseverlustes bewertet. Zur Charakterisierung des Betons (Elektrolyt) dient das Verfahren der Quecksilberporosimetrie. Mit dem Verfahren lassen sich die Zusammenhänge zwischen den betontechnologischen Parametern und der Porenstruktur aufzeigen und mittels der umfangreichen Variation der Betonparameter die Auswirkung auf den Korrosionsfortschritt nachweisen. T2 - XIII. Workshop über die Charakterisierung von feinteiligen und porösen Festkörpern CY - Bad Soden, Germany DA - 14.11.2006 PY - 2006 AN - OPUS4-14294 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Beck, Matthias A1 - Isecke, Bernd A1 - Lehmann, Jens T1 - Modelling of reinforcement corrosion - Influence of concrete technology on corrosion development N2 - Reinforcement corrosion is influenced by different parameters like resistivity of concrete, setting conditions and also by concrete technology. Moreover the presence of cathodic areas and the possibility of unhampered cathodic reaction influences the reinforcement corrosion. In this paper the development of corrosion without large cathodic areas, called self-corrosion, considering different concrete parameters, is studied. KW - Korrosion von Stahl in Beton, Zement-, Chlorid-, Wasser KW - Bindemitteleinfluß KW - Potentialverlauf KW - Polarisationswiderstand PY - 2006 U6 - https://doi.org/10.1002/maco.200604018 SN - 0947-5117 SN - 1521-4176 VL - 57 IS - 12 SP - 914 EP - 919 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-14468 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Beck, Matthias A1 - Goebbels, Jürgen A1 - Burkert, Andreas T1 - Application of X-ray tomography for the verification of corrosion processes in chloride contaminated mortar PY - 2007 SN - 0947-5117 SN - 1521-4176 VL - 58 IS - 3 SP - 207 EP - 210 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-14603 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Isecke, Bernd A1 - Beck, Matthias T1 - Electrochemical investigations of corrosion with small cathodes in steel reinforced concrete N2 - Corrosion of steel reinforcement in concrete exposed to chloride containing environments is a serious problem in civil engineering practice. The standards and guidelines contain only minimum requirements regarding concrete quality and concrete cover. In very critical cases, for example the ingress of chlorides, the application of different coatings is currently the only possibility to protect the reinforced concrete structures. In this case the modelling of reinforcement corrosion would be more practical. One sub-project of a DFG-research project (FOR 537) is currently performed at the Federal Institute for Materials Research and Testing (BAM). Aim of the sub-project is the description of corrosion propagation and the characterization of the corrosion on specimens with small and large cathodes, by electrochemical parameters. The electrochemical parameters are determined by suitable electrochemical measurements, considering concrete parameters as well as different environmental conditions. T2 - EUROCORR 2007 CY - Freiburg im Breisgau, Germany DA - 2007-09-09 PY - 2007 N1 - Serientitel: EFC-Event – Series title: EFC-Event IS - 289 SP - 1 EP - 17 PB - DECHEMA CY - Frankfurt am Main AN - OPUS4-15820 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Eichler, Thorsten A1 - Burkert, Andreas A1 - Beck, Matthias T1 - Electrochemical noise measurements on unalloyed steel in chloride-containing alkaline environment N2 - The investigations discussed in this paper aim to clarify whether electrochemical noise measurements (ENM) are capable for application in concrete and mortar, particularly with regard to pitting initiation in such environment. For these purposes, the results of several different test series are compared and discussed. Based on investigations on passivity and pitting corrosion in alkaline solutions with different chloride contents further results in cement paste, mortar and concrete are evaluated. KW - Electrochemical noise KW - Corrosion KW - Steel in Concrete KW - Chlorides KW - Pitting Corrosion KW - Cement KW - Mortar KW - Black Steel PY - 2007 U6 - https://doi.org/10.1002/maco.200704089 SN - 0947-5117 SN - 1521-4176 VL - 58 IS - 12 SP - 961 EP - 969 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-16374 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goebbels, Jürgen A1 - Isecke, Bernd A1 - Beck, Matthias A1 - Burkert, Andreas A1 - Bäßler, Ralph T1 - Monitoring of corrosion processes in chloride contaminated mortar by electrochemical measurements and X-ray tomography N2 - Corrosion of steel reinforcement in concrete exposed to chloride containing environments is a serious problem in civil engineering practice. Electrochemical methods, e.g. potential mapping, provide information whether the steel reinforcement is still passive or depassivation has been initiated. By applying such techniques no information on the type of corrosion, its extent and distribution of corrosion products is available. Particular the corrosion progress is a significant problem. Especially in the case of element corrosion in reinforced concrete structures, the development at the anode can not be separated into corrosion damage causing by element corrosion or self-corrosion. Until now also in laboratory tests it is impossible to collect such information without destroying specimens after electrochemical testing was performed place. To overcome this problem it was tried to study the steel surface within the mortar specimens by X-ray tomography (CT). Within the scope of these investigations it could be shown, that X-ray tomography is suitable to make corrosion pits visible which are embedded in a mortar with a cover thickness of about 35 mm. In this publication the corrosion damage of reinforced steel is documented timedependent by X-ray tomography. T2 - EUROCORR 2008 CY - Edinburgh, Scotland, UK DA - 2008-09-07 KW - Self-corrosion KW - X-ray tomography KW - Reinforcement KW - Concrete parameters PY - 2008 N1 - Serientitel: EFC-Event – Series title: EFC-Event IS - 299 SP - 1 EP - 10 PB - DECHEMA CY - Frankfurt am Main AN - OPUS4-17868 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beck, Matthias A1 - Isecke, Bernd T1 - Investigations of corrosion on small cathodes in reinforced concrete - observations and suggestions T2 - EUROCORR 2009 CY - Nice, France DA - 2009-09-06 PY - 2009 AN - OPUS4-20438 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Beck, Matthias T1 - Zur Entwicklung der Eigenkorrosion von Stahl in Beton N2 - Sicherheit und Dauerhaftigkeit von Stahlbetonbauwerken sind einer der wichtigsten Ansprüche bei der Bemessung von Gebäuden. Normen und Vorschriften beinhalten nur allgemeine Anforderungen an Betonqualität und Betondeckung. In besonders kritischen Fällen, beispielsweise dem Eindringen von Chloriden ist die Applikation von Beschichtungen häufig die einzige Möglichkeit die Bewehrung effektiv vor der Initiierung der Korrosion zu schützen. Im Fall der Depassivierung der Bewehrung ist die Modellierung der Korrosion eine geeignete Methode um eine Lebensdauerbemessung zu gewährleisten. In der Praxis wird die Bewehrung lokal durch in den Beton eingedrungene Chloride depassiviert und es bilden sich an dieser Stelle eng begrenzte, loch und muldenartige anodische Bereiche aus, die kathodischen Bereichen gegenüber stehen. Nach einer Zeit tritt an der Anode ein signifikanter Massenverlust auf, der aufgrund einer anodischen Eisenauflösung infolge eines Stromflusses zwischen anodischen und kathodischen Bereichen verursacht wird. Dabei kann das Flächenverhältnis zwischen anodischen und kathodischen Bereichen in einer Größenordnung von mehreren Dekaden schwanken und wird als Makroelementkorrosion bezeichnet. Die realen Massenverluste, die in der Praxis vorgefunden werden, liegen allerdings of bedeutend höher. Dieser zusätzliche Anteil an Korrosionsabtrag, der nicht auf Makroelementkorrosion zurückzuführen ist, wird als Eigenkorrosion bezeichnet. Dabei handelt es sich um eine zusätzliche Eisenauflösung auf der Anode, die durch die Hydrolyse in den Löchern verursacht wird. Dieser Eigenkorrosionsanteil muss daher bei der Lebensdauerbemessung eines Bauwerkes berücksichtigt werden. Ziel der vorliegenden Arbeit ist daher die Entwicklung der Eigenkorrosion, sowie die Entwicklung der anodischen Bereiche mit Hilfe elektrochemischer Parameter, Massenverluste und der Computertomografie zu beschreiben. Die elektrochemischen Parameter wurden dabei mit üblichen elektrochemischen Methoden aufgezeichnet und in Abhängigkeit von verschiedenen Betonparametern und Klimaten aufgetragen. Abschließend wird die Entwicklung der Eigenkorrosion in Abhängigkeit der verschiedenen Parameter in dieser Arbeit gezeigt und diskutiert. KW - Korrosionsfortschritt KW - Eigenkorrosion KW - Elektrochemische Messungen KW - Freies Korrosionspotential KW - Polarisationswiderstand KW - Abtragsraten KW - Massenverlust KW - Computertomografie PY - 2010 UR - http://darwin.bth.rwth-aachen.de/opus3/volltexte/2010/3148/ SP - 1 EP - 140 AN - OPUS4-21044 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Goebbels, Jürgen A1 - Beck, Matthias A1 - Isecke, Bernd A1 - Burkert, Andreas A1 - Bäßler, Ralph ED - Castro-Borges, P. ED - Moreno, E.I. ED - Sakai, K. ED - Gjorv, O.E. ED - Banthia, N. T1 - Self-corrosion of steel in concrete by electrochemical measurements and X-ray tomography T2 - CONSEC`10 - 6th International conference on concrete under severe conditions CY - Mérida, Yucatán, Mexico DA - 2010-06-07 KW - Self-corrosion KW - Steel KW - Concrete KW - X-ray tomography PY - 2010 SN - 978-0-415-59316-8 VL - 2 SP - 1221 EP - 1228 PB - Taylor & Francis CY - London, UK AN - OPUS4-22299 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Beck, Matthias A1 - Goebbels, Jürgen A1 - Burkert, Andreas A1 - Isecke, Bernd A1 - Bäßler, Ralph T1 - Monitoring of corrosion processes in chloride contaminated mortar by electrochemical measurements and X-ray tomography N2 - Corrosion of steel reinforcement in concrete exposed to chloride containing environments is a serious problem in civil engineering practice. Electrochemical methods, e.g., potential mapping, provide information whether the steel reinforcement is still passive or depassivation has been initiated. By applying such techniques no information on the type of corrosion, its extent and distribution of corrosion products is available. Particular the corrosion progress is a significant problem. Especially in the case of macrocell corrosion in reinforced concrete structures, the development at the anode cannot be separated into corrosion damage resulting from macrocell corrosion or self-corrosion. Until now also in laboratory tests it is impossible to collect such information without destroying specimens after electrochemical testing was performed. To overcome this problem it was tried to study the steel surface within the mortar specimens by X-ray tomography (CT). Within the scope of these investigations it could be shown, that X-ray tomography is suitable to make corrosion pits and their development visible which are embedded in a mortar with a cover thickness of about 35 mm. In this publication the time-dependent corrosion damage of reinforced steel is documented by X-ray tomography. KW - Self-corrosion KW - X-ray tomography KW - Concrete parameters KW - Contaminated mortar KW - Electrochemical measurements KW - Pitting corrosion PY - 2010 U6 - https://doi.org/10.1002/maco.200905364 SN - 0947-5117 SN - 1521-4176 VL - 61 IS - 6 SP - 475 EP - 479 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-22848 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meinel, Dietmar A1 - Beck, Matthias A1 - Goebbels, Jürgen A1 - Hanke, Daniel T1 - Zeitlicher Verlauf von verdeckter Korrosion sichtbar gemacht mit Computertomographie N2 - Zwei Bildhauermodelle aus dem Georg-Kolbe-Museum Berlin standen zur Restaurierung an. Das kleinere, "Lucino" (1920), 41cm, wurde hochauflösend mit CT gemessen, da mittels CT sowohl der Herstellungsprozeß einer Gipsstatue als auch der innere Zustand, wie Ergänzungen, Klebungen und Armierungen, festgestellt werden können. Aus den CT Bildern ergab sich eine für die vorher vermutete Gipszusammensetzung ungewöhnliche innere Struktur. Mit einer Freihand bedienten Röntgenpistole zur Messung der Röntgenfluoreszenz wurde daraufhin die Zusammensetzung des Materials der Statuette als Terracotta bestimmt. Durch den Einsatz von Helium als Spülmittel konnten auch leichte Materialien nachgewiesen und so eine Unterscheidung zwischen Gips und gebranntem Ton durchgeführt werden. Aus den CT Daten wurde eine virtuelle Darstellung der äußeren Geometrie gewonnen. Ein damit versuchsweise erstelltes Replik (Rapid Prototyping, 3D-Drucker, TU-Berlin) entsprach nicht den Anforderungen des Museums zur Erstellung einer Gußform für eine Bronzekleinserie der Statuette. Die zweite Statue, die "Große Nacht" (1930) ist mit ihrer Größe von 2,12m und aufgrund des durch korrodierende Metallarmierung verursachten Schadensbildes nicht mehr transportfähig. Eine in-situ Untersuchung mit dem mobilen Tomographen, der in den 1980ern zur Untersuchung von Bäumen gebaut und jetzt mit einem modernen Flachdetektor und einer Röntgenröhre ausgestattet ist, wird vorgestellt. Die Möglichkeiten der in-situ CT für große Skulpturen werden anhand der Ergebnisse diskutiert. T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 2010-05-10 KW - Computertomographie KW - Korrosion PY - 2010 SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (Poster 11) SP - 1 EP - 8 CY - Berlin AN - OPUS4-23166 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Beck, Matthias A1 - Burkert, Andreas A1 - Harnisch, J. A1 - Isecke, Bernd A1 - Osterminski, K. A1 - Raupach, M. A1 - Schießl, P. A1 - Tian, W. A1 - Warkus, J. T1 - Deterioration model and input parameters for reinforcement corrosion N2 - The paper presents the damage model of German Research Unit 537 which was used as a working hypothesis for the development of a user-friendly design model. Excerpts from the laboratory experiments and numerical calculations processed in project A of the research unit are presented here. The excerpts include the quantification of self-corrosion, geometrical effects in the macrocell corrosion, development of corroding steel surface and pit depth as well as the quantification of the resistivity of the concrete and the corrosion of steel in cracked concrete. KW - Reinforcement corrosion KW - Macrocell corrosion model KW - Design for durability PY - 2012 U6 - https://doi.org/10.1002/suco.201200004 SN - 1464-4177 VL - 13 IS - 3 SP - 145 EP - 155 PB - Ernst & Sohn CY - Berlin AN - OPUS4-26581 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beck, Matthias A1 - Faulhaber, Armin A1 - Isecke, Bernd T1 - Untersuchungen zur Eigenkorrosion T2 - 40. Aachener Baustofftag CY - Aachen, Germany DA - 2010-10-28 PY - 2010 AN - OPUS4-21945 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beck, Matthias A1 - Goebbels, Jürgen A1 - Isecke, Bernd A1 - Burkert, Andreas A1 - Mietz, Jürgen T1 - Investigations of corrosion on small cathodes in reinforced concrete - observations and suggestions N2 - Corrosion of steel reinforcement in concrete exposed to chloride containing environments is a serious problem in civil engineering practice. The standards and guidelines contain only minimum requirements regarding concrete quality and concrete cover. In very critical cases, for example the ingress of chlorides, the application of different coatings is currently the only possibility to protect the reinforced concrete structures. In this case the modelling of reinforcement corrosion would be more practical. One sub-project of a DFG-research project (FOR 537) is currently performed at the Federal Institute for Materials Research and Testing (BAM). Aim of the sub-project is the description of corrosion propagation and the characterization of the corrosion on specimens with small cathodes by electrochemical parameters. The electrochemical parameters are determined by suitable electrochemical measurements, considering concrete parameters as well as different environmental conditions. T2 - EUROCORR 2009 CY - Nice, France DA - 2009-09-06 KW - Self-corrosion KW - Steel reinforcement KW - Concrete parameters KW - X-ray tomography PY - 2009 IS - Paper 7976 SP - 1 EP - 13 AN - OPUS4-20063 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -