TY - JOUR A1 - Döring, Joachim A1 - Stark, Wolfgang A1 - Mc Hugh, Jarlath A1 - Bartusch, Jürgen T1 - Ultrasound on-line cure monitoring for industrial applications N2 - In recent years eure monitoring with ultrasonic methods became more important. An on-line measurement System for industrial applications is presented in this paper. It operates in through-transmission and the measured parameters are the sound velocity and the attenuation of the sound wave. An objective of this paper is to establish the ränge of possible applications for an ultrasonic eure monitoring System. KW - Ultrasonic monitoring KW - Cure process KW - Composite material KW - Process controlling PY - 2000 SN - 0963-6935 PB - Woodhead Publ. CY - Cambridge AN - OPUS4-1061 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Döring, Joachim A1 - Stark, Wolfgang A1 - Bartusch, Jürgen A1 - Mc Hugh, Jarlath T1 - Contribution to ultrasound cure control for composite manufacturing N2 - The curing conditions play an important role in the quality assurance of composite products. Especially as composite materials are widely used in high tech areas so that they are required to fulfil high quality Standards. Some problems which occur during curing, for instance undercuring, can hardly be detected using Standard NDT investigations, mainly because they are manifested only at high temperatures, particularly close to glass-rubber-transition. On-line eure monitoring has the outstanding advantage that it can monitor the material parameters even at the highest temperatures possible. In recent years eure monitoring with ultrasonic methods has become more populär. In comparison to dielectric methods mechanical parameters are measured directly. The quantities to be measured are the velocity and the attenuation of the sound wave. On this basis the storage and loss modulus can be calculated. Depending on the form of excitation with longitudinal or transversal waves these moduli are referred to as long wave or shear modulus. Well developed Computer based technology and sensor materials are available in the non-destructive testing (NDT) market. The measuring equipment employed a commercial NDT System, which worked computer-aided. With a special Software the demands of automatic Operation under industrial conditions was accomplished. This measurement equipment was tested on composites. Its structure, performance and some practical results will be presented in the following paper. T2 - 15th World Conference on Non-Destructive Testing (WCNDT) CY - Roma, Italy DA - 15.10.2000 PY - 2000 UR - http://www.ndt.net/article/wcndt00/papers/idn482/idn482.htm SN - 1435-4934 VL - 5 IS - 11 PB - NDT.net CY - Kirchwald AN - OPUS4-2136 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Döring, Joachim A1 - Bartusch, Jürgen A1 - Mc Hugh, Jarlath A1 - Stark, Wolfgang A1 - Kürten, C. T1 - Mit Ultraschall sieht man mehr - Kontrolle von Werkzeugfüllung und Vernetzungsreaktion beim Harzinjektionsverfahren RTM T2 - Poster-Ausstellung "Sensorik in der BAM" CY - Berlin, BAM, Deutschland DA - 2002-10-01 PY - 2002 SP - 1(?) AN - OPUS4-2114 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Döring, Joachim A1 - Stark, Wolfgang A1 - Mc Hugh, Jarlath A1 - Bartusch, Jürgen A1 - Fengler, Petra T1 - Rheologische und akustische Bestimmung der Fließ-Härtungseigenschaften von Injektionsharzen N2 - Zusammenfassung Der Ausgangspunkt für diese Arbeiten ist eine in [1] beschriebene Ultraschall-(US)-Sensorik zur Aushärtungskontrolle. Sie wurde für rieselfähige Formmassen entwickelt [2,3]. Darauf aufbauend ist es das Ziel der vorliegenden Arbeit, die Voraussetzungen für den Einsatz dieser Sensorik beim Harzinjektionsverfahren zu schaffen und ihre Kalibrierung durch rheologische und DSC-Messungen zu ermöglichen. Der erste Teil des Beitrages beschäftigt sich mit dem technologischen Ablauf des Harzinjektionsverfahren und den Einsatzmöglichkeiten der US-Sensorik bei dieser Technologie. Ergebnisse von Schallgeschwindigkeits- und Dämpfungsmessungen für EP-Harze werden vorgestellt. Im zweiten Teil wird auf das Kalibrieren der US-Sensorik für den Verarbeiter eingegangen. Es kann mittels der bisherigen Prozessführung oder durch Vergleich mit den Ergebnissen anderer Mess-Verfahren wie Rheometer- oder Differential-Scanning-Calerometry-(DSC)-Messungen erfolgen. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 KW - Ultraschall KW - Harzinjektionsverfahren KW - RTM KW - Prozesskontrolle KW - Aushärtung PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/v51/v51.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-1913 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Döring, Joachim A1 - Stark, Wolfgang A1 - Bartusch, Jürgen A1 - Mc Hugh, Jarlath A1 - Simon, W. T1 - Ultraschall-Prozesskontrolle mechanischer Parameter von aushärtenden Polymeren - Inline-Sensorik für die Herstellung von Kunststoffkomponenten KW - Aushärtung KW - Ultraschall KW - Sensoren KW - Materialparameter PY - 2007 SN - 0025-5300 VL - 49 IS - 5 SP - 238 EP - 242 PB - Hanser CY - München AN - OPUS4-14976 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mc Hugh, Jarlath A1 - Döring, Joachim A1 - Bartusch, Jürgen A1 - Stark, Wolfgang T1 - Making Cure Visible T2 - Aerospace Testing Expo 2005 - Europe, April 5-7, 2005, Hamburg CY - Hamburg, Deutschland DA - 2005-04-05 PY - 2005 SP - 4 pages PB - UKIP Media & Events CY - Dorking AN - OPUS4-7379 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stark, Wolfgang A1 - Bartusch, Jürgen A1 - Döring, Joachim A1 - Mc Hugh, Jarlath T1 - Making cure visible: monitoring the crosslinking process using integrated ultrasound sensors N2 - A special ultrasonic measuring system was developed to monitor the cross-linking process, enabling interaction with the manufacturing process in order to optimise part quality and reduce cycle times. KW - Thermoset KW - Ultrasound sensors KW - Mould KW - Rtm KW - Gelation KW - Vitrification PY - 2008 SN - 1639-965X IS - 38 SP - 64 EP - 66 PB - JEC CY - Paris AN - OPUS4-18610 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Döring, Joachim A1 - Stark, Wolfgang A1 - Mc Hugh, Jarlath A1 - Bartusch, Jürgen T1 - Erfassung des Fließ-Härtungs-Verhaltens von Duromeren mit Ultraschall N2 - Das Fließ-Härtungs-Verhalten von Duroplastformmassen wird gegenwärtig nur unvollständig durch empirische Größen beschrieben. Diese ungenauen und unsicheren Angaben können zu Schwierigkeiten bei der optimalen Einstellung der Fertigungsmaschinen des Verarbeiters führen. Insbesondere Veränderungen der Formmasseeigenschaften während des Transportes und der Lagerung stören die Produktion. Das vorgestellte Messverfahren mit Ultraschall-sensoren ermöglicht die schnelle und vollständige Erfassung des Fließ-Härtungs-Verhaltens, auch während des technologischen Prozesses. Experimentelle Ergebnisse zu Alterungs-erscheinungen dieser Formmassen illustrieren den Nutzen des Verfahrens für Formmasse-produzenten und -verarbeiter. T2 - DGZfP-Jahrestagung 1999 CY - Celle, Deutschland DA - 1999-05-10 PY - 1999 SN - 3-931381-27-7 IS - DGZfP-BB 68 SP - 221 EP - 228 AN - OPUS4-22937 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -