TY - JOUR A1 - Borch, Jörg-Peter A1 - Otremba, Frank A1 - Balke, Christian A1 - Burghardt, Frank T1 - Sicherheit von Flüssiggasflaschen im Unfallfeuer JF - Technische Sicherheit N2 - Neben herkömmlichen Stahlflaschen, die seit Jahrzehnten in fast unveränderter Bauform für Flüssiggase (Propan-Butan-Gemische) eingesetzt werden, etablieren sich immer mehr Flaschen aus Faserverbundwerkstoffen (GFK) mit einer geringeren Masse. Die Bundesanstalt für Materialforschung und -prüfung (BAM) wurde beauftragt, das Verhalten dieser Gasflaschen unter den extremen Bedingungen eines Unfallfeuers zu untersuchen. In einem Brandprüfstand der BAM auf dem Testgelände Technische Sicherheit (TTS) in Horstwalde wurden deshalb beide Typen von Propangasflaschen einem simulierten Unfallfeuer ausgesetzt. KW - Gefahrgut KW - Flüssiggas KW - Flaschen KW - Unfallfeuer KW - Druckgefäße KW - Gefahrguttransport PY - 2013 SN - 2191-0073 VL - 3 IS - 11/12 SP - 44 EP - 47 PB - Springer-VDI-Verl. CY - Düsseldorf AN - OPUS4-29720 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Sklorz, Christian A1 - Otremba, Frank A1 - Balke, Christian T1 - BLEVE performance of fire protection coating systems on dangerous goods tanks in a test fire JF - International journal of materials science and engineering N2 - How can the risk of a BLEVE be reduced? That is the main question based on different research projects. In various large scale fire tests fire protection coating systems were used of different manufacturers. The degree of the coating as well as the layer thickness and the processing were varied. These experimental configurations were partly tested with and without pressure relief valve. The pressure relief valves were not protected again the thermal Load from the test fire. The ambition is to find a minimum of the thickness from the fire protection coating witch delay a BLEVE up to 90 minutes. Here are given the most interested configurations of tanks in fire and a description of the test-rigs. KW - BLEVE KW - Fire protection coating KW - Isolation KW - Test rigs KW - Large scale fire test PY - 2013 DO - https://doi.org/10.12720/ijmse.1.2.90-93 SN - 2315-4527 VL - 1 IS - 2 SP - 90 EP - 93 PB - Engineering and technology publishing AN - OPUS4-30124 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -