TY - GEN A1 - Hedrich, Martina A1 - Giese, Lutz A1 - Adam, Christian A1 - Haase, Oskar A1 - Segebade, Christian T1 - Recycling of Photovoltaic CdTe-Modules - Analytical Process Monitoring T2 - Proceedings / EMC 2005, European Metaalurgical Conference N2 - Along with the globally increasing energy demand the application of renewable energy sources is urgently required. According to national regulations and international treaties (e.g. Kyoto Protocol) these sources shall be sustainably available at reasonable financial effort and non-polluting during production, use and waste treatment. Using photovoltaic sources (PV), these requirements can clearly be met. All industry has to follow the best available technology and an integrative life cycle approach for their products and production. PV thin film technology strictly responds to this obligation. In order to save material resources and to minimise undesirable landfill recycling of spent PV modules is necessary. Recycling of multi-component materials containing mixed metals typically consists of three parts: liberation, separation, and recovery. In our study (RESOLVED – an EU Demonstration Project) the focus is on liberation and separation. The converting layer (CdTe) was liberated (removed) from the glass carrier by sandblasting and separated subsequently from the blast material (e.g. corundum) and other components using stepwise different separation techniques. Both the glass substrate and CdTe are subject to re-use. The overall feasibility of the recycling process is primarily governed by the efficiency of the procedure applied to the separation of CdTe from the rest (blasting material, glass residues, etc.). This was performed by water-based flotation. Several flotation procedures were studied regarding their separation yields. The distribution of CdTe in the phases involved (flotate, water, residue) was measured using energy dispersive X-ray fluorescence spectrometry (EDXRS) intended for future routine application and by instrumental large-volume photon activation analysis (IPAA) as a reference procedure. The results of both analytical methods were in satisfactory agreement. T2 - European Metallurgical Conference (EMC 2005) CY - Dresden, Germany DA - 2005-09-18 KW - Photovoltaic (PV) KW - Solar energy KW - CdTe-Modules KW - Recycling KW - Separation techniques KW - Monitoring PY - 2005 SN - 3-935797-22-2 VL - 4 SP - 1687 EP - 1696 PB - GDMB-Medienverl. CY - Clausthal-Zellerfeld AN - OPUS4-11004 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Adam, Christian A1 - Giese, Lutz A1 - Segebade, Christian A1 - Steglich, Hans-Eckhart A1 - Weimann, Karin T1 - Recycling von Photovoltaik-Dünnschichtmodulen T2 - Tagungsband des 4. Kolloquiums "Sortieren - Innovationen und Anwendungen" T2 - 4. Kolloquium SORTIEREN - Innovationen und Anwendungen CY - Berlin, Deutschland DA - 2005-10-06 KW - Photovoltaik KW - Recycling KW - Dünnschichtmodul KW - Cadmiumtellurid KW - Nassmechanische Aufbereitung KW - Photonenaktivierungsanalyse PY - 2005 SP - 55 EP - 65 PB - TU Berlin CY - Berlin AN - OPUS4-11053 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weimann, Karin A1 - Adam, Christian ED - Rogge, A. ED - Meng, B. T1 - Optimierung von Rückbau und Aufbereitung von Altbeton T2 - 52. DAfStb-Forschungskolloquium N2 - Die Qualität von rezyklierten Gesteinskörnungen muss nicht nur bautechnischen Anforderungen und rechtlich verbindlichen Umweltstandards genügen, sondern ihr Einsatz in der Betonherstellung wird auch vor dem Hintergrund der Leitlinien der Nachhaltigkeit bewertet. Für die Gewinnung von rezyklierten Gesteinskörnungen bedeutet dies, dass sowohl bei den Abbrucharbeiten als auch bei der Bauschuttaufbereitung darauf geachtet werden muss, dass die gewählten Verfahren nicht nur ökonomischen Kriterien genügen müssen, sondern auch keine nachteiligen ökologischen oder sozialen Auswirkungen haben dürfen. In verschiedenen Forschungsprojekten konnte durch ökobilanzielle Bewertungen von einzelnen Verfahren und Verfahrensabläufen gezeigt werden, dass rezyklierte Gesteinskörnungen aus Altbeton unter bestimmten Rahmenbedingungen umweltverträglich gewonnen werden können und ihre Nutzung durch die Substitution von Natursteinkörnungen sowohl zur Schonung von natürlichen Ressourcen als auch zu einer Reduzierung von Umweltbelastungen beitragen kann. T2 - 52. DAfStb-Forschungskolloquium CY - Berlin, Deutschland DA - 07.11.2011 KW - Bauschutt KW - Recycling KW - Abbruch KW - Bauschuttaufbereitung KW - Ökobilanzielle Bewertung PY - 2011 SN - 978-3-9814281-0-0 IS - Kap. H3 SP - 308 EP - 317 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-25011 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ante, A. A1 - Trumpler, A. A1 - Niermann, S. A1 - Decker, Renate A1 - Hermann, L. A1 - Adam, Christian T1 - SUSAN - Sustainable and safe re-use of municipal sewage sludge for nutrient recovery JF - GWF / Wasser, Abwasser KW - Sewage sludge KW - Phosphorus KW - Recycling KW - Thermochemical treatment KW - Heavy metal removal KW - Large scale consideration PY - 2010 SN - 0016-3651 VL - 151 IS - 13 SP - 78 EP - 84 PB - Oldenbourg-Industrieverl. CY - München AN - OPUS4-22097 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Adam, Christian A1 - Kabbe, Ch. A1 - Kraus, F. A1 - Remy, Ch. T1 - Phosphorrückgewinnung und Recycling aus dem Abwasser N2 - Phosphorrecycling sollte nicht isoliert praktiziert werden, sondern im Kontext der spezifischen Abwasserbehandlung und der Betrachtung weiterer Nährstoffe wie Stickstoff und Kalium. Hohe Rückgewinnungsquoten um jeden Preis sind nicht immer zielführend und u.U. sogar schädlich für die Kreislaufwirtschaft. Es sollte eine Kombination verschiedener Ansätze je nach vorhandener Infrastruktur verfolgt werden. Fällungsverfahren (Struvit) sind geeignet kostengünstig kleine Mengen Phosphor zurückzugewinnen. Für ein umfassendes P-Recycling muss die Rückgewinnung aus der Asche erfolgen. T2 - 20. Leibnitz-Conference of Advanced Science - "Ressourcenmanagement als Beitrag zur gesicherten Rohstoffversorgung" CY - Lichtenwalde, Saxony, Germany DA - 19.05.2016 KW - Recycling KW - Phosphor KW - Abwasser PY - 2016 AN - OPUS4-36319 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ante, A. A1 - Trumpler, A. A1 - Niermann, S. A1 - Decker, R. A1 - Herrmann, L. A1 - Adam, Christian T1 - SUSAN - Sustainable and safe re-use of municipal sewage sludge for nutrient recovery - Large scale considerations of the thermo-chemical heavy metal removal from sewage sludge for the safe recycle of phosphorus T2 - Bremer Colloquium - Produktionsintegrierte Wasser-/Abwassertechnik - "Abwasser als Ressource" Kreislaufschließung, Energie- und Wertstoffrückgewinnung T2 - Bremer Colloquium - Produktionsintegrierte Wasser-/Abwassertechnik - "Abwasser als Ressource" Kreislaufschließung, Energie- und Wertstoffrückgewinnung CY - Bremen, Germany DA - 2009-09-28 KW - Sewage sludge KW - Phosphorus KW - Recycling KW - Thermochemical treatment PY - 2009 SP - 1 EP - 14(?) AN - OPUS4-22183 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Taube, Mareike Carolin A1 - Adamczyk, Burkart A1 - Adam, Christian A1 - Feldmann, Ines A1 - Ostermann, Markus A1 - Reuter, M. A1 - Stelter, M. T1 - Tantalrecycling aus pyrometallurgischen Rückständen JF - World of Metallurgy – ERZMETALL N2 - Gegenstand dieser Arbeit ist die Untersuchung eines bestehenden pyrometallurgischen Prozesses zur Rückgewinnung von Tantal und Niob aus metallurgischen Reststoffen mit vorwiegend niedriger Wertstoffkonzentration. Zur näheren Erforschung der im vorliegenden Stoffsystem ablaufenden Reduktionsprozesse wurden in einem Elektrolichtbogenofen Schmelzversuche im Pilotmaßstab durchgeführt. Als Reduktionsmittel diente Koks, welcher mithilfe einer Argon-gespülten Eisenlanze in die flüssige mineralische Schmelze eingebracht wurde. Während der Reduktionsbehandlung werden Refraktärmetalle wie Tantal und Niob in ihre Carbide überführt und anschließend in der erschmolzenen eisenbasierten Metallphase am Boden des Reaktors angereichert. Neben Tantal und Niob gelangt auch ein Teil des im Einsatzmaterial enthaltenen Titans als unerwünschtes Begleitelement in die Metallphase. Sein Großteil verbleibt jedoch als Oxid in der Schlacke und wird dort hauptsächlich im Mineral Perowskit (CaTiO3) gebunden. Die erstarrten Schlackeproben wurden mit verschiedenen Methoden wie Röntgenfluoreszensanalyse, Röntgenbeugung und Rasterelektronenmikroskopie mit gekoppelter energiedispersiver Röntgenanalyse untersucht, um die Bildung tantalhaltiger Mineralphasen zu verschiedenen Stadien des Reduktionsprozesses zu verfolgen. Die hier gewonnenen Erkenntnisse zeigen, dass weniger die durch das Einblasen von Koks verursachte Reduktionsreaktion, sondern das Absinken der tantalreichen Eisentröpfchen in der flüssigen mineralischen Schmelze, gefolgt von ihrer Anreicherung in die Metallphase, für die Kinetik ausschlaggebend ist. N2 - An existing pyrometallurgical process for tantalum and niobium recovery, mainly from low grade pyrometallurgical residues, was investigated. Melting experiments were carried out in a pilot-scale electric arc furnace to study the material system during the reduction process caused by blowing coke into the liquid mineral melt. During the pyrometallurgical treatment refractory metals such as tantalum and niobium are converted into their carbides and enriched in the molten iron-based metal phase. Titanium is also enriched in the metal phase as an unwanted accompanying element, but most of it remains in oxidic form in the slag and is mainly bound in the mineral perovskite. Cooled down slag samples were analysed using XRF, XRD, SEM and EDX to investigate the formation of mineral phases rich in tantalum during various stages of the reduction process. The results show that the settling of the tantalum-rich iron droplets in the molten slag into the metal phase May play a greater role for the kinetics than the actual reduction reaction caused by blowing in coke. KW - Tantal KW - Recycling KW - Reduktionsprozess KW - Perowskit KW - Elektrolichtbogenofen PY - 2020 SN - 1613-2394 VL - 73 IS - 4 SP - 196 EP - 205 PB - GDMB Verlag GmbH CY - Clausthal-Zellerfeld AN - OPUS4-51064 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Adam, Christian A1 - Krüger, Oliver A1 - Hobohm, Julia A1 - Kuchta, Kerstin T1 - Seltene Erden aus Fluoreszenzlampen – Optimierung der Elementanalytik N2 - - Spurenelementanalytik aus Fluoreszenzlampen optimiert - Königswasseraufschluss Methode der Wahl für REE - Perchlorsäure-/Flusssäureaufschluss in Kombination mit Königswasseraufschluss für die meisten Elemente geeignet - Teilweise starke Abhängigkeit der Aufschlusseffizienz vom Element bzw. der vorliegenden Elementspezies - Nicht aufgelöste Glasmatrix stört die Analytik nicht T2 - UpGrade Abschlussveranstaltung CY - Berlin, Germany DA - 22.02.2016 KW - Seltenerdmetalle KW - Fluoreszenzlampen KW - Recycling PY - 2016 AN - OPUS4-35690 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weimann, Karin A1 - Adam, Christian A1 - Schulz, T. A1 - Linsz, E. T1 - Environmental evaluation of different ways to produce recycled concrete aggregates T2 - SUM2014 - 2nd Symposium on urban mining (Proceedings) N2 - Due to the great quantities of construction and demolition waste in Europe, the reuse of building material waste as secondary raw materials is of particular importance. A recycling of building materials can meet the requirements of sustainability in several aspects: the extended time availability of primary raw materials and the related protection of natural resources as well as the saving of landfill sites. In recent years sulphates originating from gypsum in secondary building materials, made of construction and demolition waste, received growing attention. Sulphates are unwanted in secondary building materials for concrete production as well as for other use e.g. in unbounded layers. The content of gypsum resp. sulphates in secondary aggregates can be reduced by different methods. Depending on the type of material different steps for selective dismantling can be used to separate gypsum containing residues from concrete rubble. Furthermore some steps for the processing of building rubble are suitable for the reduction of sulphates in the produced aggregates. An environmental evaluation of different ways for the production of recycled concrete aggregates was performed with regard to a reduction of sulphates in the secondary building material. The use of techniques for selective dismantling was environmentally advantegous for the deconstruction of three investigated model houses. T2 - SUM2014 - 2nd Symposium on urban mining CY - Bergamo, Italy DA - 19.05.2014 KW - Recycling KW - Concrete aggregates KW - Building waste KW - Construction PY - 2014 SN - 9788862650311 SP - Session C 6, 1 EP - 8 AN - OPUS4-30825 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Taube, Mareike Carolin A1 - Adam, Christian A1 - Adamczyk, Burkart A1 - Beckmann, T. A1 - Reuter, M. A1 - Stelter, M. ED - Reiser, B. T1 - Recycling von metallurgischen Rückständen - Schmelzversuche zeigen, wie die Tantalrückgewinnung aus Zinnschlacken und weiteren Reststoffen optimiert werden kann JF - ReSource N2 - Since the recycling of tantalum bearing post-consumer waste is practically not existent, metallurgical residues are the most important feed for the tantalum recycling. Most tin ores naturally contain significant quantities of refractory metals. During the smelting process in primary tin production these elements are enriched in the slag phase. This slag is a highly valuable raw material for tantalum production due to its considerable concentration of tantalum and its functioning as an additional slag former in further pyrometallurgical treatment. In this paper the first process stage of an existing pyrometallurgical process for tantalum recovery, mainly from low grade pyrometallurgical residues, is discussed. Smelting trials were carried out in a pilot-scale electric arc furnace to analyse the effect of feeding on the activity of carbon as a reducing agent. Therefore, blowing petroleum coke through an iron lance and the manual adding of coke into the melting bath were tested. During the pyrometallurgical treatment elements with a high affinity to carbon were reduced to their carbide form and enriched in the molten iron-based metal phase. The objective of the process was to reduce the oxidic tantalum completely and to enrich it into the metal phase. Furthermore, the transfer of unwanted elements such as titanium into the metal phase was aimed to be avoided. Spoon test specimens were taken from the liquid mineral melt to follow the evolution of the reduction process. The cooled down solidified melting bath was investigated by using the XRD and EDX method to characterise the slag system and to identify relevant mineral phases. N2 - Da das Recycling von tantalhaltigen Post-Consumer-Abfällen praktisch nicht existiert, stellen metallurgische Reststoffe eine äußerst wichtige Rohstoffquelle für das Tantalrecycling dar. Die meisten Zinnerze enthalten von Natur aus erhebliche Mengen an Refraktärmetallen. Diese Elemente werden in den Schlacken der pyrometallurgischen Primärzinngewinnung angereichert. Aufgrund ihrer vergleichsweise hohen Wertstoffkonzentration und ihrer Funktion als zusätzlicher Schlackenbildner stellen diese Schlacken einen wertvollen Rohstoff für die Verhüttung tantalhaltiger Reststoffe dar. In der vorliegenden Arbeit wird ein existierendes Verfahren zur Tantalrückgewinnung diskutiert, dem hauptsächlich pyrometallurgische Rückstände geringer Wertstoffkonzentration als Einsatzstoff dienen. Mit Hilfe des Verfahrens sollte dasoxidisch vorliegende Tantal vollständig reduziert und in der Metallphase angereichert werden. Weiterhin sollte vermieden werden, dass unerwünschte Elemente wie Titan in die Metallphase überführt werden. Ziel der Untersuchung war es, die ablaufenden Reduktionsprozesse besser zu verstehen, um so Ansätze für die Prozessoptimierung identifizieren zu können. KW - Lichtbogenofen KW - Pyrometallurgie KW - Recycling KW - Tantal KW - Zinnschlacke PY - 2020 SN - 0934-3482 VL - 33 SP - 10 EP - 17 PB - Rhombos-Verlag CY - Berlin AN - OPUS4-50656 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -