TY - JOUR A1 - Huismann, Sven A1 - Weise, Frank A1 - Meng, Birgit A1 - Schneider, U. T1 - Influence of polypropylene fibres on the thermal strain of high strength concrete at high temperatures JF - Journal of structural fire engineering N2 - This paper presents the results of an experimental study on the influence of polypropylene (PP) fibres on the thermal strain of high strength concrete (HSC) at temperatures up to 750°C. Concerning this topic only few results can be found in the literature and systematic investigations are missing. However, basic knowledge is necessary to understand the internal damage processes as well as for structural design. To explain the differences in the thermal strain of HSC with and without addition of PP fibres the internal damage processes were investigated with acoustic emission (AE) analysis and ultrasound (US). Furthermore the weight loss was measured continuously during heating to monitor the drying of the specimen. This novel approach by combining these different methods with strain measurements at high temperatures allows the integral description of the internal damage processes. The results reveal significant differences in the thermal strain of HSC when PP fibres are added. Between 200°C and 250°C the thermal strain of HSC with PP fibres is superimposed by shrinkage caused by accelerated drying. Above 250°C it is lower than that of plain HSC without PP fibres. It is supposed that it is caused by a more homogeneous distribution of micro cracks whereby the fibre beds acting as defects in the concrete. Hence this paper gives a contribution to the general understanding of the impact of PP fibres in HSC at high temperatures and points out the influence of the fibres on the thermal strain of HSC. KW - High performance concrete KW - High temperatures KW - Polypropylene fibres KW - Thermal strain KW - Acoustic emission KW - Ultrasound PY - 2011 DO - https://doi.org/10.1260/2040-2317.2.3.173 SN - 2040-2317 VL - 2 IS - 3 SP - 173 EP - 179 PB - Multi-Science Publ. Co. CY - Brentwood AN - OPUS4-24817 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Pistol, Klaus A1 - Weise, Frank A1 - Meng, Birgit T1 - Polypropylen-Fasern in Hochleistungsbetonen - Wirkungsmechanismen im Brandfall JF - Beton- und Stahlbetonbau N2 - Bauteile bzw. Tragwerke aus Hochleistungsbetonen müssen in der Regel gegen brandinduzierte Abplatzungen mit geeigneten Maßnahmen geschützt werden, um einen ausreichenden Feuerwiderstand im Brandfall zu gewährleisten. Die bisher wirtschaftlich und technologisch sinnvollste Methode zur Verhinderung von explosionsartigen Betonabplatzungen im Brandfall ist die Zugabe von Polypropylen-Fasern. Die Wirksamkeit der Fasern konnte zwar empirisch gezeigt werden, es stellt sich allerdings die Frage, welche Mechanismen zur Verhinderung der Abplatzungen führen. Der vorliegende Beitrag fasst bisherige Theorien zur Wirkungsweise von Polypropylen-Fasern in brandbeanspruchten Hochleistungsbetonen zusammen und stellt eine innovative Methodologie zur Erforschung der mikrostrukturellen Prozesse vor. Die Ergebnisse zeigen, dass die nach dem Schmelzen und Zersetzen der Polypropylen-Fasern frei werdenden Mikrokanäle durch eine gleichzeitig einsetzende Mikrorissbildung netzartig verbunden werden. Die Mikrorissbildung ermöglicht somit den Abbau von Eigen- und Zwangsspannungen im Beton (mechanischer Effekt) und die Entstehung eines Transportwegesystems für den ausströmenden Wasserdampf (Permeationseffekt).--------------------------------------------------------------------------- Structural members and bearing structures of high performance concrete generally have to be protected against explosive spalling due to fire exposure to guarantee a sufficient fire resistance. Up to now, the economically and technologically most worthwhile method to prevent explosive spalling is the addition of polypropylene fibres. Though the effectiveness of the fibres could be shown empirically, the mechanisms preventing explosive spalling are still debatable. The present article summarizes the existing theories concerning the mode of action of polypropylene fibres in fire exposed high performance concretes and presents an innovative methodology for analysing the micro structural processes. The results show that due to the thermal decomposition of the polypropylene fibres micro channels are created and simultaneously connected due to a netlike micro crack formation. This enables the relief of internal stresses (mechanical effect) and the formation of a permeable transport system for the escaping water vapour (permeation effect). KW - Polypropylen-Fasern KW - Brandschutz KW - Structural fire protection KW - Computertomographie KW - Computed tomography KW - Hochleistungsbeton KW - High performance concrete KW - Messtechnik KW - Mikrorisse KW - Micro cracks KW - Polypropylen-Fasern KW - Polypropylene fibres KW - PP-Fasern KW - Prüfmethoden KW - Rasterelektronenmikroskopie KW - Scanning electron microscopy KW - Risse KW - Schallemissionsanalyse KW - Acoustic emission KW - UHPC KW - Baustoffe KW - Brandschutz KW - Versuche PY - 2012 DO - https://doi.org/10.1002/best.201200024 SN - 0005-9900 SN - 1437-1006 VL - 107 IS - 7 SP - 476 EP - 483 PB - Ernst CY - Berlin AN - OPUS4-26174 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -