TY - JOUR A1 - Wille, Frank A1 - Wolff, Dietmar A1 - Droste, Bernhard A1 - Völzke, Holger A1 - Baden, M. T1 - German approach and feedback on experience of transportability of SNF packages after interim storage JF - Packaging, transport, storage & security of radioactive materials (RAMTRANS) N2 - In Germany, the concept of dry interim storage of spent fuel in dual purpose metal casks is implemented, currently for periods of up to 40 years. The casks being used have an approved package design in accordance with the international transport regulations. The license for dry storage is granted on the German Atomic Energy Act with respect to the recently revised 'Guidelines for dry interim storage of irradiated fuel assemblies and heat-generating radioactive waste in casks' by the German Waste management Commission. For transport on public routes between or after long term interim storage periods, it has to be ensured that the transport and storage casks fulfil the specifications of the transport approval or other sufficient properties, which satisfy the proofs for the compliance of the safety objectives at that time. In recent years, the validation period of transport approval certificates for manufactured, loaded and stored packages were discussed among authorities and applicants. A case dependent system of 3, 5 and 10 years was established. There are consequences for the safety cases in the Package Design Safety Report, including evaluation of long term behaviour of components and specific operating procedures of the package. The present research and knowledge concerning the long term behaviour of transport and storage cask components have to be consulted as well as experiences from interim cask storage operations. Challenges in the safety assessment are e.g. the behaviour of aged metal and elastomeric gaskets under IAEA test conditions to ensure that the results of drop tests can be transferred to the compliance of the safety objectives at the time of transport after the interim storage period. Assessment methods for the material compatibility, the behaviour of fuel assemblies and the aging behaviour of shielding parts are issues as well. This paper describes the state of the art technology in Germany, explains recent experience on transport preparation after interim storage and points out arising prospective challenges. KW - Radioactive material storage KW - Dry storage KW - Interim storage KW - Cask design KW - Radioactive material transport KW - Regulation KW - Operating procedures KW - Package KW - Safety KW - Storage KW - Transport KW - Lagerung KW - Spent fuel PY - 2014 DO - https://doi.org/10.1179/1746510914Y.0000000064 SN - 1746-5095 SN - 1746-5109 SN - 0957-476X VL - 25 IS - 2 SP - 55 EP - 59 PB - Ramtrans Publ. CY - Ashford AN - OPUS4-33834 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wille, Frank A1 - Wolff, Dietmar A1 - Droste, Bernhard A1 - Völzke, Holger A1 - Baden, M. T1 - German approach and experience feedback of transport ability of SNF packages after interim storage T2 - PATRAM 2013 - 17th International symposium on the packaging and transportation of radioactive materials (Proceedings) N2 - In Germany the concept of dry interim storage of spent fuel in dual purpose metal casks is implemented, currently for periods of up to 40 years. The casks being used have an approved package design in accordance with the international transport regulations. The license for dry storage is granted on the German Atomic Energy Act with respect to the recently revised “Guidelines for dry interim storage of irradiated fuel assemblies and heat-generating radioactive waste in casks” by the German Waste management Commission (ESK). For transport on public routes between or after long term interim storage periods, it has to be ensured that the transport and storage casks fulfil the specifications of the transport approval or other sufficient properties which satisfy the proofs for the compliance of the safety objectives at that time. In recent years the validation period of transport approval certificates for manufactured, loaded and stored packages were discussed among authorities and applicants. A case dependant system of 3, 5 and 10 years was established. There are consequences for the safety cases in the Package Design Safety Report including evaluation of long term behavior of components and specific operating procedures of the package. Present research and knowledge concerning the long term behavior of transport and storage cask components have to be consulted as well as experiences from interim cask storage operations. Challenges in the safety assessment are e.g. the behavior of aged metal and elastomeric gaskets under IAEA test conditions to ensure that the results of drop tests can be transferred to the compliance of the safety objectives at the time of transport after the interim storage period. T2 - PATRAM 2013 - 17th International symposium on the packaging and transportation of radioactive materials CY - San Francisco, CA, USA DA - 18.08.2013 KW - Storage KW - Transport KW - Lagerung KW - Verpackung KW - Radioactive material PY - 2013 SP - 1 EP - 9 PB - Omnipress AN - OPUS4-30159 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Günther, U. A1 - Baden, M. A1 - Komann, Steffen A1 - Nitz, Thilo T1 - Performance and restrictions of non-destructive testing (NDT) within the quality surveillance during manufacturing of type B-packages T2 - PATRAM 2010 - 16th International symposium on the packaging and transport of radioactive materials (Proceedings) T2 - PATRAM 2010 - 16th International symposium on the packaging and transport of radioactive materials CY - London, UK DA - 2010-10-03 KW - Mechanische Bewertung KW - Radioaktives Material KW - Numerische Analyse KW - Qualitätsüberwachung PY - 2010 SP - 1 EP - 8 AN - OPUS4-23675 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Baden, M. A1 - Nitz, Thilo T1 - Surveillance of quality assurance in the manufacture of transport and storage casks for spent fuel and high-level waste JF - Packaging, transport, storage & security of radioactive materials (RAMTRANS) N2 - The purpose of quality assurance measures in the manufacture of packaging for radioactive materials is to ensure that the series sample conforms to the design that was authorised in the design approval certificate and fulfils all the design requirements. In Germany, the basis of this process is TRV 006 (Technical Rules Traffic). This describes the manufacturing requirements and a system of supervision for the production process. Packaging components are divided into levels of three classification according to their importance for safety. Compliance with the requirements of the highest classification level is supervised directly by the Federal Institute for Materials Research and Testing (BAM) as the German competent authority or to a great extent by consulted experts. In this paper an example will be given of the qualification of a foundry for the production of cask bodies made of ductile cast iron. The results will be presented. Production based on the parts list and drawings stated in the design approval certificate for the packaging is supervised and documented by a quality assurance programme. This is pre-checked and released by BAM. For all instances of non-conformity in manufacturing, non-conformance reports have to be issued by the manufacturer and evaluated by BAM. These are itemised in the acceptance certificate, which certifies the conformity of the series sample with the approved design. Details of this supervision system, experience with several hundred manufactured casks and results will be presented. KW - Verpackungen KW - Beförderung KW - Radioaktive Stoffe KW - Qualitätssicherung KW - Qualitätsüberwachung PY - 2005 SN - 1746-5095 SN - 1746-5109 SN - 0957-476X VL - 16 IS - 1 SP - 43 EP - 47 PB - Ramtrans Publ. CY - Ashford AN - OPUS4-7521 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -