TY - CONF A1 - Schartel, Bernhard T1 - Flammschutz für Polymere in der Elektrotechnik N2 - Das Brandverhalten stellt wie das elektrische Isolationsverhalten, die geringen elektrischen Verluste, die Verarbeitbarkeit und Formbarkeit eine der wesentlichen Schlüsseleigenschaften im Eigenschaftsprofil von Polymerwerkstoffen in der Elektrotechnik dar. Dabei bedarf es einer Ausrüstung der Polymere mit Flammschutzmittel. Die Entwicklung von immer effizienteren, synergistischen und multifunktionalen Multikomponentensystemen ist dabei eine herausragende Quelle für Innovation. Die Verbesserung der werkstoff- und anwendungsspezifischen Flammschutzlösungen bestimmen die aktuellen und zukünftigen Polymermaterialien in der Elektrotechnik mit. Der Vortrag stellt anhand von Beispielen einige der erfolgreichen Konzepte dar. Es wird versucht, über das wissenschaftlich systematische Verständnis Grundprinzipien und Lösungsstrategien zu verdeutlichen. T2 - Vortrag des Monats Oktober 2020, Neue Materialien Bayreuth GmbH CY - Bayreuth, Germany DA - 06.10.2020 KW - Flammschutzmittel KW - Elektrotechnik KW - Brandtests KW - Synergie KW - Multikomponentensysteme PY - 2020 AN - OPUS4-51410 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian A1 - Iznaguen, H. A1 - Traub, Heike A1 - Feldmann, Ines A1 - Köppen, Robert A1 - Witt, Angelika A1 - Jung, Christian A1 - Becker, Roland A1 - Oleszak, K. A1 - Bücker, Michael A1 - Urban, Klaus A1 - Reger, Christian A1 - Ostermann, Markus T1 - Bewitterungsszenarien im Vergleich – Veränderungen in der Oberflächenmorphologie von Polypropylen (PP) und Polystyrol (PS) unter dem Aspekt des Austrags von polybromierten Flammschutzmitteln N2 - In addition to previously reported results on the simulated aging of polystyrene samples (PS) containing 1 wt. % hexabromocyclododecane (HBCD), we present the first results of our investigations of polypropylene (PP)-samples containing 0.1 wt. % BDE-209. All studied polymer samples were exposed to a defined weathering schedule in a climate chamber in accordance to regulation EN ISO 4892-3:2006.For the determination of BDE-209 in the collected rain water samples derived from the used climate chamber, the samples were prepared in accordance with a validated protocol. Before the analyses, each sample was spiked with 2 µL of isotopically labeled BDE-209 (13C10-BDE-209) to serve as internal standard (ISTD) in the performed stable isotope dilution analysis. Subsequently the samples were extracted with isooctane, the obtained aliquots of the extracts were concentrated to 200 µL and 2 µL of the resulting solution were injected to the GC/MS for quantification. Additionally, the total bromine contents are monitored for the aged and untreated samples using laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) as well as X-ray fluorescence analysis (XRF) as non-destructive and rapid method. Furthermore, results from surface analysis using environmental scanning electron microscopy (ESEM) for morphological characterization of the aged and untreated samples were presented and discussed. In general, the resulting data from the accelerated aging will be compared to those from the natural weathering experiments (“atmospheric exposure”, in soil). The atmospheric exposure was performed by placing the samples on a weathering rack, which is aligned in SW direction (in a 45° angle to the horizon). The weathering data were regularly recorded by Deutscher Wetterdienst at this site. The surfaces of the test specimens (aged and stored references) were analyzed by ESEM as well as by LA-ICP-MS and by XRF. The surface of PS and PP specimens aged outdoors present the aging under real conditions and allow the comparison to the accelerated aged specimens by means of the weathering chamber. This way, we explore the efficiency of the accelerated aging procedure, which provides the advantage of well-defined and reproducible conditions compared to natural weathering, as a tool for testing different plastic materials. Additionally “in soil” experiments were conducted in-door in a well characterized testing soil. The soil (boulder-clay, sand with 12 % loam, particle size in total 0.2-4 mm) is filled in a free-draining concrete basin inside of an air-conditioned room. In this manner, TOC, water capacity and humidity are recorded parameters. To assure a washing out process from the samples by the raining water, the target water content is calculated to 8%. The actual humidity is measured by a tensiometer, assuring the duration of the raining period. The water content is additionally monitored by weight of the basin, capturing water from raining periods. The correct humidity is a fundamental parameter for biological activity. Samples of PS resp. PP were of dimension 10x1cm and 5 specimens were placed up to the half in the soil per basin. Microbial activity of the soil, monitored by the reference polyurethane, sets HBCD resp. BDE-209 of the samples free and will be leached from the samples by raining water. Thereafter these will be captured by passive samplers placed in a distinct distance to the samples in the soil. The “in soil” experiments are complementary to the weathering experiments due to the biological activity in the soil. These experiments simulate the fate of the brominated flame retardants in the biosphere. N2 - Gegenstand der vorzustellenden Arbeiten ist die Prüfung der Umweltbeständigkeit und -verträglichkeit von Materialien und Produkten hinsichtlich der Emission von potenziellen Schadstoffen in die Umwelt. Hierzu werden chemisch-physikalische Einflüsse (Bewitterung) und mikrobielle Beanspruchungen an Modellmaterialien evaluiert. So werden die Freisetzungsraten von Schadstoffen in Abhängigkeit der Beanspruchung beschrieben. Als Modellmaterialien kommen die Polymere Polystyrol (PS) und Polypropylen (PP) zum Einsatz, die jeweils mit polybromierten Flammschutzmitteln (PBFSM) versehen sind. Synergistische Effekte der Bewitterungsparameter und der mikrobiologischen Beanspruchung sollen dabei ebenso betrachtet werden, wie die gezielte Alterung. Auch findet eine Beschreibung des Verhaltens der ausgetragenen Schadstoffe in den Umweltkompartimenten Boden oder Wasser statt. Hier sind mit Hilfe der zu entwickelnden Screening- und non-Target-Analyseverfahren die Transformation und der Metabolismus durch Mikroorganismen zu beschreiben. Auch soll mit Hilfe der RFA und der LA-ICP-MS die Abreicherung der PBFSM in den Modellmaterialien beschrieben werden. Aus den Ergebnissen sollen Korrelationen zwischen den künstlichen Alterungsverfahren und realen Szenarien abgeleitet werden. T2 - 47. Jahrestagung der GUS 2018 CY - Stutensee - Blankenloch, Germany DA - 21.03.2018 KW - Polypropylen KW - Polystyrol KW - Flammschutzmittel KW - XRF KW - LA-ICP-MS PY - 2018 AN - OPUS4-47024 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hofmann-Böllinghaus, Anja A1 - Knaust, Christian T1 - Kinderzimmerbrand: Großversuch und Computermodellierung N2 - In Europa kommen ca. 80 % der Brandtoten bei Wohnungsbränden ums Leben. Dabei sind Brände in Wohn- und Schlafzimmern besonders gefährlich. Einige Objekte, wie Polstermöbel und Fernseher, stellen im Brandfall eine besonders große Gefahr dar, da sie sich schon durch kleine Zündquellen, wie ein Feuerzeug oder eine Kerze, leicht entzünden lassen, eine hohe Wärmefreisetzungsrate haben und viel Rauch produzieren. Ein einzelnes Sofa kann in einem Raum einen Flashover erzeugen. Besonders im Kinderzimmer tritt oft eine Häufung an besonders gefährlichen Objekten wie Polstermöbeln, Matratzen und elektrischen Geräten auf. Da Kinder sich im Brandfall oft falsch verhalten – sie verstecken sich an schwer zugänglichen Orten wie unter dem Bett oder im Schrank anstatt den Raum zu verlassen – sind sie besonders gefährdet. KW - Wohnungsbrände KW - CFD Modellierung KW - Großversuch KW - Flammschutzmittel PY - 2006 SN - 1434-9728 SN - 1436-4948 SN - 0372-2457 SN - 0376-1185 VL - 47 IS - 10 SP - 10 EP - 14 PB - Springer-VDI-Verl. CY - Düsseldorf AN - OPUS4-28304 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weber, M. A1 - Durmaz, V. A1 - Becker, Roland A1 - Esslinger, Susanne T1 - Predictive identification of Pentabromocyclododecene (PBCD) isomers with high binding affinity to hTTR N2 - The binding affinities of the six main hexabromocyclododecane (HBCD) stereoisomers and all of their possible 48 allylic pentabromocyclododecene (PBCD) metabolites to the endocrinous human transthyretin receptor (hTTR) were investigated and compared to the natural binder thyroxine, and the two brominated diphenyl ethers BDE-47 and 3-hydroxy-BDE-47. The endocrine disrupting potency was approximated by a combination of two methods: a surface matching with the natural binder thyroxine (T4) followed by approximation of free binding energies for various binding modes within hTTR. The results indicate slightly higher binding affinities for both BDE structures than for T4 itself and similarly high affinities for two trans-configurated PBCD isomers. For many other PBCD isomers, intermediate values were computed, whereas all HBCD diastereomers yielded significantly lower binding affinities. T2 - Dioxin 2009 - 29th International symposium on halogenated persistent organic pollutants / Organohalogen compounds CY - Beijing, China DA - 2009-08-23 KW - Flammschutzmittel KW - Thyroxin KW - Molecular modeling PY - 2009 UR - http://www.dioxin20xx.org/pdfs/2009/09-54.pdf VL - 71 SP - 000247 EP - 000252 CY - Beijing, China AN - OPUS4-20980 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hofmann-Böllinghaus, Anja ED - Dietmar Hosser, T1 - Brandgefahr im Kinderzimmer - Numerische und experimentelle Untersuchung von verschiedenen Szenarien T2 - Braunschweiger Brandschutz-Tage `07, 21. Fachtagung Brandschutz - Forschung und Praxis CY - Braunschweig, Deutschland DA - 2007-09-26 KW - Wohnungsbrände KW - CFD Modellierung KW - Großversuch KW - Flammschutzmittel PY - 2007 SN - 978-3-89288-181-0 SN - 0934-2419 SN - 1439-3875 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. IS - 199 SP - 63 EP - 72 AN - OPUS4-16109 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hofmann-Böllinghaus, Anja A1 - Knaust, Christian A1 - Beard, A. T1 - Computermodellierung von Wohnungsbränden unter Berücksichtigung von Rauchmeldern und Flammschutzmitteln T2 - 8. SKZ-Fachtagung "Kunststoffe, Brandschutz und Flammschutzmittel" CY - Würzburg, Deutschland DA - 2006-06-21 KW - Wohnungsbrände KW - CFD Modellierung KW - Großversuch KW - Flammschutzmittel PY - 2006 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. VL - 8 SP - 1 EP - 23(?) PB - SKZ CY - Würzburg AN - OPUS4-12906 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Braun, Ulrike T1 - Wirkungsmechanismen von Rotem Phosphor als Flammschutzmittel in Thermoplasten N2 - Das Brandverhalten von Rotem Phosphor in HIPS, PBT und PA66 wurde untersucht. Es wurde gezeigt, wie die Wirksamkeit von Rotem Phosphor in HIPS and PBT durch Kombination mit anderen Flammschutzmitteln zu verbessern ist. N2 - Polymers are flammable due to their chemical nature. As a consequence they must be treated with flame-retardants before they can be used in fields with high flammability risks, such as transport, electronic devices and building construction. The use of red phosphorus as a fire retardant has been encouraged because it is an environmentally friendly alternative to halogenated compounds. The intention of this thesis was to evaluate the potential of red phosphorus as a flame retardant and to determine its fire-retardant mechanisms in different thermoplastics. The thermal decomposition and combustion behaviour of HIPS, PBT and PA66 containing red phosphorus was studied. It further investigated how the activity and efficiency of red phosphorus in HIPS and PBT was influenced by additional flame retardants such as melamine polyphosphate, melamine cyanurate and magnesium hydroxide. The decomposition process was characterized by means of different thermogravimetric methods (TG-FTIR, TG-MS), and the combustion behaviour by cone calorimeter measurements at various external heat fluxes. The flammability was investigated with LOI and the residue of combustion was analysed by means of XPS. Based on these results models for decomposition process were postulated. Red phosphorus can act both by promoting char formation in the condensed phase, and through radical trapping in the gas phase. Red phosphorus acts in the condensed phase in PA66, and in the gas phase in HIPS. In PBT both mechanisms were observed, depending on the pH value. When red phosphorus is combined with fuel-dilution additives such as melamine species in HIPS and PBT, both flame retardants act independently. The combustion behaviour of the combined material can be described by superposition of the distinct flame-retarded materials. In the presence of a barrier former, such as magnesium hydroxide in HIPS, the gas-phase mechanism of red phosphorus remains unaffected; however, a slight anti-synergism results. This is based on formation of a magnesium phosphate barrier, which influences the efficiency of phosphorus as a radical trap. The results showed that the activity of phosphorus as a flame retardant in thermoplastics depends on the water content of the polymer, the pH value and the presence of functional groups in the polymer. The efficiency of phosphorus as a flame retardant in the condensed and gas phases depends on combustion conditions. T3 - BAM Dissertationsreihe - 10 KW - Roter Phosphor KW - Flammschutzmittel KW - Thermoplasten PY - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-1486 SN - 978-3-86509-303-5 SN - 1613-4249 VL - 10 SP - 1 EP - 164 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-148 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Pawlowski, Kristin Helga T1 - Wirkungsmechanismen von Bisphenol-A-bis(diphenylphosphat) als Flammschutzmittel in Polycarbonat / Acrylnitril-Butadien-Styrol-Copolymerisat N2 - Die Suche nach halogenfreien Flammschutzmitteln für Polycarbonat / Acrylnitril- Butadien-Styrol-Copolymerisat (PC/ABS) führte zur Entwicklung von Triphenylphosphat (TPP), Resorcinol-bis(diphenylphosphat) (RDP) und Bisphenol-A- bis(diphenylphosphat) (BDP). Das unvollständige Wissen über die genauen Wirkungsmechanismen dieser Arylphosphate erschwert jedoch eine gezielte Optimierung der Systeme. In der vorliegenden Arbeit wurden die verschiedenen Flammschutzmechanismen von BDP in PC/ABS aufgeklärt. Ein Vergleich zwischen BDP mit RDP und TPP wurde gezogen und der Einfluss weiterer Additive wie Polytetrafluorethylen (PTFE), Böhmit, Zinkborat und Talk auf das Flammschutzverhalten von BDP herausgearbeitet. Dazu wurde das thermische Abbauverhalten mittels TG und TG-FTIR aufgeklärt. Die Entflammbarkeit wurde mit LOI- und UL 94-Tests bestimmt und das Brandverhalten anhand von Messungen im Cone Calorimeter bei unterschiedlichen Bestrahlungsstärken bewertet. Die Verbrennungsrückstände wurden mittels Festkörper-FTIR und Festkörper-NMR-Messungen charakterisiert. BDP wirkt in PC/ABS in der Gasphase durch Flammenvergiftung und in der festen Phase als Vernetzungsinitiator von PC. PTFE beeinflusst das Fließverhalten der Polymerschmelze und ermöglicht so die beste Klassifizierung im UL 94-Test von PC/ABS mit BDP. BDP ist thermisch stabiler als RDP und TPP und deshalb am aktivsten mit PC in der festen Phase. Böhmit verursacht durch eine H2O-Freisetzung Hydrolysereaktionen und wirkt somit leicht antagonistisch bezüglich der Festphasenaktivität von BDP. Zinkborat reagiert mit BDP zu alpha-Zinkphosphat und Borphosphat und unterdrückt so die Wirkung von BDP als Flammenvergifter und Vernetzungsinitiator. Die Zugabe von Talk bewirkt eine Verstärkung des Rückstandes, hat aber einen antagonistischen Effekt bezüglich der Gasphasenaktivität von BDP. Die Ergebnisse dieser Arbeit liefern ein detailliertes Verständnis der Flammschutzmechanismen von BDP und deren Abhängigkeit von der physikalischen und chemischen Umgebung. Mit diesem Wissen kann die Weiterentwicklung von BDP und anderen Arylphosphaten als Flammschutzmittel in PC/ABS gezielt optimiert werden. N2 - The search for halogen-free flame retardants for polycarbonate/acrylonitrile-butadiene- styrene (PC/ABS) has led to the development of triphenylphosphate (TPP), resorcinol bis(diphenyl phosphate) (RDP) and bisphenol A bis(diphenyl phosphate) (BDP).The lack of knowledge about the detailed flame retardant mechanisms of those arylphosphates makes it difficult to optimize those systems. In this thesis, the various flame retardancy mechanisms of BDP in PC/ABS have been clarified. BDP was compared to RDP and TPP and the influence of further additives (Polytetrafluoroethylene (PTFE), boehmite, zinc borate and talc) on the mechanisms of BDP were revealed. The thermal decomposition behaviour was clarified by means of TG and TG-FTIR. The flammability was determined by LOI and UL 94. The fire behaviour was evaluated by cone calorimeter measurements with different irradiations. Combustion residues were characterized by means of solid-state-FTIR and solid-state-NMR. BDP acts in PC/ABS as a flame inhibitor in the gas phase and as an initiator of cross linking in the condensed phase. PTFE influences the dripping behaviour of the polymer melt and enables PC/ABS + BDP to achieve the best classification in UL 94. BDP is thermally more stable than RDP and TPP and hence the most active flame retardant in the condensed phase. Boehmite releases water, which causes hydrolysis. This has an antagonistic effect concerning the condensed phase action of BDP. Zinc borate reacts with BDP to form alpha-zinc phosphate and borophosphate and suppresses the mechanisms of BDP as flame inhibitor and cross linking initiator. Talc stabilizes the char, but has an antagonistic effect on the gas phase action of BDP. The results gained from this thesis give a detailed understanding about the flame retardancy mechanisms of BDP and their dependence on the physical and chemical environment. They are fundamentals for a continuing development and improvement of aryl phosphates as flame retardants in PC/ABS. T3 - BAM Dissertationsreihe - 33 KW - PC/ABS KW - Entflammbarkeit KW - Pyrolyse KW - Acrylphosphate KW - Flammschutzmittel PY - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-1250 SN - 978-3-9812072-3-1 SN - 1613-4249 VL - 33 SP - 1 EP - 117 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-125 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Perret, Birgit T1 - Neuartige halogenfreie Flammschutzmittel für schnell härtende Epoxidharzsysteme und deren kohlefaserverstärkte Komposite in Automobilbau und Luftfahrt N2 - Phosphorhaltiger Flammschutz als effektive halogenfreie Alternative in Epoxidharzen rückt immer mehr in den Blickpunkt des Interesses. Oft werden kommerzielle additive Flammschutzmittel verwendet, die zu Einbußen vor allem in der Mechanik führen. Zusätze, wie Kohlefasern beeinflussen die Wirkungsmechanismen und Effektivitäten der Flammschutzmittel zusätzlich. Der Anteil an optimal an die Epoxidharzmatrix angepassten additiven Flammschutzmitteln ist bisher gering, da ein tieferes Verständnis von Struktur-Eigenschaftsbeziehungen und den daraus resultierenden vorherrschenden Flammschutzmechanismen und Einflüssen von Additiven fehlt. In der vorliegenden Arbeit wurden Flammschutzmechanismen von systematisch varrierten neuartigen oligomeren Flammschutzmitteladditiven auf Phosphorbasis in zwei in der Industrie gebräuchlichen Epoxidharzen, DGEBA/DMC und RTM6, aufgeklärt und ein Vergleich der Wirkungsweisen der Flammschutzmittel in beiden Harzen gezogen. Das Brandverhalten wurde charakterisiert und die Effizienz der Flammschutzmittel bewertet. Der Einfluss von Kohlefasern auf die Wirkungsmechanismen und das Brandverhalten wurde untersucht und die Effizienz der Flammschutzmittel in den Kompositen mit den Reinharzen verglichen. Das thermische Zersetzungsverhalten wurde mittels TG ermittelt. Produkte aus der Gasphase wurden mit TG- FTIR identifiziert und Wechselwirkungen in der kondensierten Phase online in einer mit FTIR gekoppelten hot- stage Zelle charakterisiert. Intrinsische Brandeigenschaften wurden mit dem Bombenkalorimeter und dem PCFC, die Entflammbarkeit mit LOI und UL 94 bestimmt. Das Brandverhalten wurde anhand von Cone Calorimeter Messungen unter Berücksichtigung verschiedener Brandzenarien beurteilt und die Brandrückstände mittels Elementaranalyse, REM und μ-CT untersucht. Durch die sternförmige Struktur sind die untersuchten Flammschutzmittel gut mit der Harzmatrix mischbar, ihr Einfluss auf die Mechanik ist gering und auf die Glasübergangstemperaturen moderat. In DGEBA/DMC wirken alle Flammschutzmittel hauptsächlich in der Gasphase, in RTM6 sowohl in der Gas- als auch kondensierten Phase. Die Wirkungsweise hängt maßgeblich von vier Faktoren ab: in den Harzen von der strukturellen Beschaffenheit, sowie den Abbautemperaturen, in den Flammschutzmitteln von der hydrolytischen Stabilität, sowie der chemischen Umgebung der Phosphorgruppen. Diese vier Faktoren steuern die Bildung reaktiver Gruppen von Harz und Flammschutzmittel in der kondensierten Phase, die zu Vernetzungsreaktionen führen. Unabhängig von der Wirkung in der Gas- oder kondensierten Phase oder in beiden, reduzieren alle untersuchten Flammschutzmittel das Brandrisiko drastisch, wobei die Kombination aus Gas- und Festphasenaktivität in RTM6 zu einer etwas besseren Effektivität führt. Die Performance in der Entflammbarkeit wird mit Zugabe der Flammschutzmittel in beiden Harzen hinsichtlich des LOI verbessert. Im UL 94 bewirkt die alleinige Gasphasenaktivität der untersuchten Flammschutzmittel in DGEBA/DMC keine Verbesserung, während das Zusammenspiel von Gas- und Festphasenaktivität in RTM6 zur besten Klassifizierung im UL 94 führt. Der Einsatz von Kohlefasern mindert zwar die Wirkung in der kondensierten Phase, die Effizienz der Flammschutzmittel wird auf Grund der weiterhin vorherrschenden Gasphasenaktivität jedoch nur geringfügig beeinflusst. Im LOI führt die Kombination aus X Kohlefasern und Flammschutzmitteln zu teilweise drastischen Steigerungen auf Grund von synergistischen Effekten insbesondere in RTM6. Die Ergebnisse liefern ein umfassendes Verständnis über Struktur-Eigenschaftsbeziehungen phosphorhaltiger Flammschutzmittel und Additive in Epoxidharzen. Die aufgeklärten Wirkungsmechanismen bilden wesentliche Grundlagen für die Weiterentwicklung und Optimierung des Flammschutzes in Epoxidharzen. Unter Berücksichtigung mechanischer Eigenschaften, thermischer Stabilitäten und Flammschutzeffizienz wurden mehrere optimale Flammschutzlösungen gefunden N2 - Phosphorous-containing flame retardants as an effective alternative to halogen-containing ones are attracting growing interest for the use in epoxy resins. Commercially available additive flame retardants often lead to the deterioration of certain material properties, particularly in the mechanical properties. Additives like carbon fibres further influence the mechanisms of action and the effectiveness of flame retardants. The percentage of flame retardants that are adapted perfectly to the epoxy matrix is negligible so far, since deeper understanding is lacking of the structure-property relationships and the flame-retarding mechanisms they entail, not to mention the influence of additives. The present study elucidates the flame-retarding mechanisms of different novel oligomeric flame retardant additives based on phosphorous, which are added to two industrially used epoxy matrices, DGEBA/DMC and RTM6. The mechanisms of action of These systematically varied flame retardants were compared in both epoxy resins. The burning behaviour was characterised and the efficiency of the flame retardants was estimated. The influence of carbon fibres on the flame-retarding mechanisms and burning behaviour was investigated, and the efficiency of the flame retardants in the composites was compared with that of the bulk materials. The thermal decomposition behaviour was investigated using a TG. Volatile products in the gas phase were identified using a TG-FTIR. Interactions in the condensed phase were characterised online using an FTIR coupled with a hot-stage cell. Intrinsic fire properties were examined with a bomb calorimeter and PCFC, and flammability with LOI and UL 94. The burning behaviour was evaluated via a cone calorimeter under consideration of different fire scenarios. The fire residues were investigated using elemental analysis, REM and μ-CT. All investigated flame retardants are well miscible due to their star-shaped structure, and they have a minor influence on the mechanical properties and a moderate one on the glasstransition temperature. In DGEBA/DMC all flame retardants work mainly in the gas phase. In RTM6 they work in the gas phase as well as in the condensed phase. The mechanism of action is strongly dependent on four parameters: in the epoxy resins, on their structure and the decomposition temperatures resulting from their structure; in the flame retardants, on the hydrolytical stability and chemical environment of the phosphorous. These four parameters control the formation of reactive groups from the epoxy resins and the flame retardants in the condensed phase, which lead to cross-linking reactions. Independent of the action in the gas and/or condensed phase, all flame retardants drastically reduce the fire risk, whereas the combination of gas-phase and condensed-phase action in RTM6 yields slightly better efficiency. The flammability performance with regard to the LOI increases with addition of the flame retardants. In the UL 94, for the investigated flame retardants in DGEBA/DMC, the gas-phase action alone does not improve performance, while the interplay of gas-phase and condensed-phase action in RTM6 leads to the best classification in UL 94. Indeed, the use of carbon fibres decreases the action in the condensed phase, while the efficiency of the flame retardants with respect to the gas-Phase action is influenced only slightly. In the LOI the combination of carbon fibres and flame retardants leads to some drastic increases due to synergistic effects, particularly in RTM6. T3 - BAM Dissertationsreihe - 92 KW - Flammschutzmittel KW - carbon fibre composites KW - burning behavior KW - decomposition mechanisms KW - Epoxidharze KW - Abbaumechanismen KW - Brandverhalten KW - Kohlefaserkomposite KW - Flame retardants KW - epoxy resins PY - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-660 SN - 978-3-9815134-7-9 SN - 1613-4249 VL - 92 SP - 1 EP - 178 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-66 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -