TY - JOUR A1 - Mishra, Kirti Bhushan A1 - Wehrstedt, Klaus-Dieter A1 - Krebs, Holger T1 - Boiling liquid expanding vapour explosion (BLEVE) of peroxy-fuels: Experiments and computational fluid dynamics (CFD) simulation JF - Energy procedia N2 - Fire and explosion hazards associated with storage and transportation of flammable materials have been a matter of great interest in the recent times. BLEVE is a scenario that occurs when a closed fuel container is subjected to heat for a longer duration. Such events are disastrous to human beings and assets both. In the past there have been numerous studies on BLEVEs and fireballs of hydrocarbon fuels, e.g. kerosene, gasoline, LPG, LNG and others. Though, the fireballs of peroxy-fuels are not looked into detail as such. This article tries to overcome this lack of knowledge. Both, experimental investigation and CFD simulations are performed to measure and predict the fireball characteristics of a peroxy-fuel. Due to thermal decomposition in the liquid phase and active oxygen content a peroxy-fuel fireball burns at a very fast rate and emit higher thermal radiation whereas exhibits smaller diameter and elevation compared to hydrocarbons. That eventually leads to consideration of larger safety distances from them which are also verified by CFD results. KW - BLEVE KW - Hydrocarbons KW - Peroxy-fuels KW - Safety distances KW - CFD simulation PY - 2015 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-334184 DO - https://doi.org/10.1016/j.egypro.2015.02.082 SN - 1876-6102 VL - 66 SP - 149 EP - 152 PB - Elsevier Ltd. CY - Amsterdam AN - OPUS4-33418 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mishra, Kirti Bhushan A1 - Wehrstedt, Klaus-Dieter ED - Leipertz, A. T1 - Peroxy-fuels: potential applications in combustion engines T2 - 11th International congress on engine combustion processes - current problems and modern techniques N2 - Present work deals with the potential usage of peroxy-fuels (usually known as organic peroxides) in engine combustion processes. Although as additives (in small quantities < 5% to conventional fuels e.g. diesel, gasoline) peroxy-fuels are well known for many years their commercial applications as a main or primary fuel are not investigated in detail as such except a few. Since they are thermally unstable and energetic their safety demands great care during processing which restricts their commercial exploitation. However, once the issues with safety are resolved they can be much more advantageously employed than conventional fuels. Some of these advantages are: significant amount of fuel saving, reduction in amount of inducted air or even in the complete absence of air i.e. anaerobically, smaller volume of combustion (chamber), oxygenated fuel quality and low emissions. In this study we introduce an idea to develop the components of an engine operating solely on peroxy-fuels. The engine concept is based on single and multiple injectors in a cylinder with special material coating to ensure a temperature controlled processing. T2 - 11th International congress on engine combustion processes - current problems and modern techniques CY - Ludwigsburg, Germany DA - 14.03.2013 KW - Industrial fires KW - Storage units KW - Safety measures KW - Explosion KW - Overpressure KW - CFD simulation PY - 2013 SN - 3-931901-87-4 N1 - Serientitel: Berichte zur Energie- und Verfahrenstechnik (BEV) – Series title: Berichte zur Energie- und Verfahrenstechnik (BEV) IS - 13.1 SP - 157 EP - 164 AN - OPUS4-27951 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mishra, Kirti Bhushan A1 - Wehrstedt, Klaus-Dieter A1 - Krebs, Holger T1 - Lessons learned from recent fuel storage fires JF - Fuel processing technology N2 - Industrial fire and explosion hazards due to accidents in fuel storage units have gained a considerable attention in recent years. Both, the regulatory bodies and scientific communities are heavily concerned about the proper safety measures to avoid such calamities in the future. This paper aims to bring some essentials related to the hazards that arose from recent fuel storage fire accidents occurring in Buncefield, UK (2005), Puerto Rico, USA (2009) and Sitapura, India (2009). The potential similarities behind occurrence of these accidents are studied. The applicability of various methods (models) and also computer simulations to estimate the safety distances according to the international standards for both explosion and fire hazard are verified. The overpressures caused by the Vapor Cloud Explosions (VCE) and radiation fluxes emitted by the fires are considered for respective explosion and fire hazard estimations. The prime focus is placed on the regulations laid down by the National Fire Protection Agency of the United States and the European Norms. KW - Industrial fires KW - Storage units KW - Safety measures KW - Explosion KW - Overpressure KW - CFD simulation PY - 2013 DO - https://doi.org/10.1016/j.fuproc.2012.08.003 SN - 0016-2361 SN - 0378-3820 SN - 1873-7153 VL - 107 SP - 166 EP - 172 PB - Elsevier CY - Amsterdam AN - OPUS4-27598 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mishra, Kirti Bhushan A1 - Wehrstedt, Klaus-Dieter A1 - Krebs, Holger T1 - Lessons learned from recent fuel storage fires T2 - ICCEU 2012 - 11th International conference on combustion and energy utilization (Proceedings) N2 - Industrial fire and explosion hazards due to accidents in fuel storage units have gained a considerable attention in the recent times. Both the regulatory bodies and scientific communities are heavily concerned about the proper safety measures to avoid such calamities in future. This paper aims to bring some essentials related to the hazards arose from the recent fuel storage fire accident occurred in Buncefield, UK (2005), Puerto Rico, USA (2009) and Sitapura, India (2009). The potential similarities behind occurrence of these accidents are studied. The applicability of various methods (models) and also computer simulations to estimate the safety distances according to the international standards for both explosion and fire hazard are verified. The overpressures caused by the Vapor Cloud Explosion (VCE) and radiation flux emitted by the fire are considered for respective explosion and fire hazard estimations. The prime focus is placed on the regulations laid down by the National Fire Protection Agency of the United States and the European Norms. T2 - ICCEU 2012 - 11th International conference on combustion and energy utilization CY - Coimbra, Portugal DA - 2012-05-09 KW - Industrial fires KW - Storage units KW - Safety measures KW - Explosion KW - Overpressure KW - CFD simulation PY - 2012 SP - 1 EP - 10(?) AN - OPUS4-26186 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mishra, Kirti Bhushan A1 - Wehrstedt, Klaus-Dieter T1 - CFD simulation to predict the performance of a peroxy-fuel burner T2 - 38th National conference on fluid mechanics and fluid power (Proceedings) N2 - new burner concept for peroxy-fuels is proposed. The performance of the proposed peroxy-fuel burner is predicted with the help of Computational Fluid Dynamics (CFD) simulation. It is found that peroxy-fuel burner not only requires considerable less amount of fuel for the same output/power but also at the same time the overall size of the processing unit can be reduced. As peroxy-fuels contain oxygen atoms within the molecule itself a similar to oxy-fuel combustion environment is created without even supplying pure oxygen. CFD simulations also support the above facts and demonstrate the existence of less favorable conditions to form NOx. T2 - 38th National conference on fluid mechanics and fluid power CY - Bhopal, India DA - 15.12.2011 KW - Burner KW - Peroxy-fuels KW - Performance KW - CFD simulation PY - 2011 IS - Paper HT-07 SP - 1 EP - 6 AN - OPUS4-25380 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mishra, Kirti Bhushan A1 - Wehrstedt, Klaus-Dieter T1 - Combustion of peroxy-fuels T2 - ERCOFTAC conference - Highly resolved experimental and numerical diagnostics for turbulent combustion -HRTC-1- (Proceedings) N2 - The diffusion flames of organic peroxides exhibit quite different characteristics than hydrocarbons. What makes them interesting to study is their fast burning behaviour. As a result the flame temperature enhances and so does the thermal radiation. Due to all these they demand safe handling during processing. However, they can be utilised at several places in different industries where a fuel with fast burning, high temperature and intense radiation are desired. Some of the possibilities to use them as a main or supporting fuel in a wide range of industrial utilities are the major content of this paper. T2 - ERCOFTAC conference - Highly resolved experimental and numerical diagnostics for turbulent combustion CY - Rouen, France DA - 25.05.2011 KW - Energetic materials KW - Process industries KW - Organic peroxide KW - Di-tert-butyl peroxide (DTBP) KW - CFD simulation KW - Emission PY - 2011 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-247083 SP - 1 EP - 5 AN - OPUS4-24708 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mishra, Kirti Bhushan A1 - Wehrstedt, Klaus-Dieter T1 - An efficient and clean fuel for high temperature process industries T2 - 11th Conference on energy for a clean environment N2 - The use of energetic materials as a main fuel in high temperature process industries are not known to the scientific community as such. This paper highlights some of the features and advantages of using organic peroxides especially di-tert-butyl peroxide (DTBP) in high temperature process industries. The feasibility of using DTBP as a main or supporting fuel in process industries have also been justified with the help of Computational Fluid Dynamics (CFD) simulations. For peroxides requirement of less fuel and air for the same amount of heat flux has been shown. The resulted emission from the combustion of DTBP is also discussed. T2 - 11th Conference on Energy for a Clean Environment CY - Lisbon, Portugal DA - 2011-07-05 KW - Energetic materials KW - Process industries KW - Organic peroxide KW - Di-tert-butylperoxide (DTBP) KW - CFD simulation KW - Emission PY - 2011 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-247071 SP - 1 EP - 10 AN - OPUS4-24707 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mishra, Kirti Bhushan A1 - Wehrstedt, Klaus-Dieter A1 - Schönbucher, A. ED - Witt, P. J. ED - Schwarz, M.P. T1 - Prediction of burning rate of an accidentally released flammable fuel by means of CFD simulation T2 - 7th International Conference on CFD in the minerals and process industries (Proceedings) T2 - 7th International Conference on CFD in the minerals and process industries CY - Melbourne, Australia DA - 2009-12-09 KW - Mass burning rate KW - CFD simulation KW - TBPB KW - TBPEH KW - Turbulent fire KW - Fuel Froude number PY - 2009 SN - 978-0-643-09825-1 SP - 1 EP - 7 AN - OPUS4-20768 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Mishra, Kirti Bhushan T1 - Experimental investigation and CFD simulation of organic peroxide pool fires (TBPB and TBPEH) N2 - Time averaged mass burning rate (m˙′′f ), flame length (H), temperature (T ), irradi- ance (E) and surface emissive power (SEP ) of TBPB (tert -butyl peroxybenzoate) and TBPEH (tert-butyl peroxy-2-ethylhexanoate) pool fires are measured for six pool di- ameters (d = 0.059 m, 0.107 m, 0.18 m, 0.5 m, 1 m and 3.4 m) at BAM in house and outside test facility. The measured heats of combustion (–Δhc) of TBPB and TBPEH are 30113 kJ/kg and 34455 kJ/kg and the specific heat capacities at constant pressure (cp) are 1.8 kJ/(kg K) and 2.1 kJ/(kg K) respectively. The measured m˙′′f of TBPB and TBPEH pool fires are in the range of 0.37 kg/(m2 s)≤ m˙ ′′ f ≤ 0.83 kg/(m2 s) and show little dependence on the pool diameter d, and are four to sixty times higher (for d = 1 m) than that of hydrocarbon pool fires. It is shown that the mass burning rates of the investigated organic peroxides can be represented as an exponential function of the self-accelerating decomposition temperature (SADT). Low SADT implies that the organic peroxide pool fires burn at a much higher m˙′′f than hydrocarbon pool fires. Fuel Froude numbers (Frf) of TBPB and TBPEH are 5 to 100 times (depending on d) higher than for hydrocarbon pool fires. Due to higher Frf the H of TBPB and TBPEH (measured with a S-VHS Videocamera) are found to be two times larger (d = 1 m) than corresponding pool fires of hydrocarbons. Heskestads flame length correlation predicts the Hd (d = 3.4 m) of TBPB and TBPEH pool fires much better than Thomas and Fay correlations. The measured time averaged flame temperatures T (d = 3.4 m) for TBPB and TBPEH pool fires are in the range of 1400 K ≤ T ≤ 1500 K and are 200 K to 300 K higher than for JP-4, kerosene and gasoline. The irradiances of the TBPB and TBPEH pool fires measured by radiometers are E (Δy/d = 0.3) = 45 kW/m2 and E = 98 kW/m2 which are two to ten times higher in comparison to the corresponding n-pentane, super gasoline and diesel pool fires. So the thermal safety distances for organic peroxide pool fires are larger by a factor four in comparison to the hydrocarbon pool fires. An infrared thermography system is used for the determination of SEP of TBPB and TBPEH pool fires. The values of surface emissive power for TBPB and TBPEH are SEP (d = 3.4 m) = 196 kW/m2 and SEP = 258 kW/m2 and thus the SEP are by a factor of approximately two higher than for hydrocarbon pool fires. A self-sustained pulsating Hd (’W’-Effect) is found in TBPB pool flames and is further analysed to explain the reason of occurance on the basis of chemical structure of the fuel and discontinuous heat flux back from flame to the liquid pool. CFD simulations of TBPB and TBPEH pool fires at d = 0.18 m, 0.5 m, 1 m, 3.4 m and 8 m are carried out using the Unsteady Reynolds Averaged Navier Stokes (URANS) equa- tions. The three-dimensional geometries have been discritized with unstructured hybrid grids, with the number of cells in the range of 1 million. Depending on the grid resolu- tion and the pool diameter time steps of 0.0001 s ≤ Δt ≤ 0.01 s for the CFD simulations are used. For solving the discritized equations a finite volume based implicit solver AN- SYS CFX has been used. For modelling the combustion, stoichiometric combustion for both peroxides are assumed. The temperature dependence of the reaction rate has been determined by the Arrhenius approach. For modelling the combustion eddy dissipation concept (EDC) model has been used. For turbulence buoyancy modified k- � and SAS (Scale Adaptive Simulation) turbulence models are used. For the thermal radiation and soot mass fraction discrete transfer radiation model and Magnusson soot model have been used. A new method is suggested for the prediction of mass burning rate (m˙′′f ) by CFD simula- tion. Both peroxide pool fires show approximately constant mass burning rate indepen- dent of d whereas m˙′′f of TBPEH are under predicted at the beginning but show relatively good agreement with measurements for large pool diameters (d = 1 m). In case of TBPB the CFD simulation over predicts the mass burning rate m˙′′f of small TBPB pool fires and shows a continuous decrease with d. CFD predicts the flame length H close to the measured data provided that the constants in Thomas equation are modified. The CFD predicted time averaged surface emission flame temperatures of TBPB and TBPEH pool fires (d = 3.4 m, 1437 K and 1542 K) are in good agreement with the measured time averaged flame temperatures. The CFD predicted SEP for TBPB and TBPEH pool fires (d = 3.4 m, 217 kW/m2 and 288 kW/m2) are also in agreement with the measured values. From the CFD predicted irradiance ECFD it is possible to determine the thermal safety distances from large pool fires of hydrocarbons and organic peroxides. T3 - BAM Dissertationsreihe - 63 KW - Pool fires KW - organic peroxides flame characteristics KW - safety distance KW - CFD simulation PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-950 SN - 978-3-9813550-6-2 SN - 1613-4249 VL - 63 SP - 1 EP - 150 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-95 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -