TY - CONF A1 - Fedelich, Bernard A1 - Kindrachuk, Vitaliy A1 - Becker, M. T1 - Simulation of non-isothermal mechanical tests on a single crystal nickel-basis superalloy N2 - Gas turbines are widely used for a variety of purposes including power generation, compression or as jet engines in aircrafts. The critical components of a gas turbine are the high-pressure turbine blades which operate under severe conditions. These include thermo-mechanical loadings over temperatures ranging from room temperature up to 1100°C. While a large number of constitutive models for single crystals have been proposed, most applications are restricted to special loading scenarios, temperature range and deformation mechanisms. In particular, a number of models are focused on pure creep. Only a few papers consider application of both creep and fatigue. Applications of the constitutive models to long-term stress relaxation are even scarcer. The new model assumes deformation-induced softening and can properly reproduce the viscous behavior at different time scales. The model has been calibrated with the uniaxial tests at 800°C and 950°C in [001], [011] and [111] specimens of a nickel-basis superalloy. The predicted creep, short- and long-term relaxation and cyclic tests are in reasonable agreement with the experimental observations. T2 - Eigth International Conference on Low Cycle Fatigue CY - Dresden, Germany DA - 27.06.2017 KW - Constitutive law KW - Superalloy KW - Single crystal KW - Creep KW - Low cycle fatigue PY - 2017 AN - OPUS4-40923 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -