TY - CONF A1 - Schilling, Markus T1 - Tensile Test: From Standard to PMD Application Ontology N2 - Data analysis methods play an important role in both the experimental and simulation-based digital description of materials but have so far been poorly structured. The platform Material Digital (PMD) should contribute to a standardized description of data processing methods in materials research. The goal is the quality assurance of the processes and the output data, the acquisition and definition of their accuracy as well as the interoperability between applications. Therefore, application ontologies are created to explicitly describe processes and test methods. In this presentation, the first efforts in creating a tensile test application ontology in accordance with the ISO standard 6892-1:2019-11 are shown. Especially, the path of ontology development to be pursued based on standards was focused. T2 - Onboarding Workshop der Plattform Material Digital (PMD) CY - Online meeting DA - 13.04.2021 KW - Ontology KW - Platform MaterialDigital KW - PMD KW - Tensile Test KW - Normung KW - Standardization PY - 2021 AN - OPUS4-52425 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Koch, Claudia A1 - Blind, K. T1 - Towards Agile Standardization: Testbeds in Support of Standardization for the IIoT N2 - The Industrial Internet of Things (IIoT) poses multiple challenges to traditional standardization, due to the complexity, dynamics, and accelerating speed of technological progress. The need for a timely availability of standards calls for new approaches and tools to enhance standardization processes for smart manufacturing. Industry and standards development organizations worldwide are seeking new solutions. Testbeds have been acknowledged in innovation policy as a powerful tool for knowledge transfer and the further development of emerging technologies. Lately, they have also attracted increasing attention from the standardization perspective as a promising tool for a more agile standards development process. Proponents of such testbeds expect them to support standardization by providing validated solutions and accelerating the processes to meet the growing demands for faster standardization without any detriment to quality. In an explorative, qualitative approach this article is the first to investigate the operation and impact of testbeds in standardization processes based on a multiple case study on testbeds implemented worldwide in the context of the IIoT. KW - Testumgebung KW - Reallabor KW - Normung KW - Standards KW - Standardization KW - Industrie 4.0 KW - Smart manufacturing KW - Industrial internet of things KW - Agility KW - Agile PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-513300 DO - https://doi.org/10.1109/TEM.2020.2979697 VL - 68 IS - 1 SP - 59 EP - 74 AN - OPUS4-51330 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Koch, Claudia T1 - Testbeds for standardization in the IIoT N2 - The poster presents our research findings on the role and impacts of testbeds in standardization for the industrial internet of things. Based on a multiple case study, four different approaches were identified followed in the testbeds with regard to their standardization activities. T2 - EU BRIDGIT2 Project - National Event Bridging the Innovation Gap Between Research & Market Impact using Standardisation CY - Dublin, Ireland DA - 11.09.2019 KW - Normen KW - Normung KW - Standards KW - Standardization KW - Industrie 4.0 KW - Testumgebung KW - IIoT KW - Testbed PY - 2019 AN - OPUS4-50086 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Koch, Claudia T1 - Accreditation, conformity assessment and national quality infrastructure - The system in Germany and areas of research N2 - The presentation gives an overview and some examples of research projects conducted at BAM (Department S.2) in the field of QI T2 - National Quality Infrastructure • Beijing Forum CY - Peking, People's Republic of China DA - 08.01.2019 KW - QI KW - Qualitätsinfrastruktur KW - Quality infrastructure KW - Conformity assessment KW - Konformitätsbewertung KW - Standardization KW - Normung KW - Akkreditierung KW - Accreditation PY - 2019 AN - OPUS4-49124 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Koch, Claudia A1 - Blind, K. ED - Jakobs, K. ED - Morone, P. T1 - Testbeds for standardization in the IIoT N2 - In the paper, we discuss the role and impacts of testbeds in standardization for the industrial internet of things. Based on a multiple case study, four different approaches were identified followed in the testbeds with regard to their standardization activities. T2 - 24th EURAS Annual Standardisation Conference CY - Rom, Italy DA - 13.06.2019 KW - IIoT KW - Industrie 4.0 KW - Normen KW - Standards KW - Normung KW - Standardization KW - Agile KW - Testbed PY - 2019 SN - 978-3-95886-282-1 SP - 215 EP - 234 PB - Verlagshaus Mainz CY - Aachen AN - OPUS4-49121 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Koch, Claudia T1 - Testbeds for standardization in the IIoT N2 - The poster presents our research findings on the role and impacts of testbeds in standardization for the industrial internet of things. Based on a multiple case study, four different approaches were identified followed in the testbeds with regard to their standardization activities. T2 - BRIDGIT2 conference at NSAI CY - Dublin, Irland DA - 11.09.2019 KW - IIoT KW - Normen KW - Industrie 4.0 KW - Standards KW - Normung KW - Standardization KW - Testbed PY - 2019 AN - OPUS4-48937 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grätz, Rainer T1 - IEC TC31/SC 31M and CEN TC 305 N2 - Overview about the status of european and international standardisation in the field of explosion protection of nonelectrical equipment and protective systems T2 - 21st ExNB-Meeting - Coordination of Notified Bodies - Directive 2014/34/EU of the European Parliament and of the Council (ATEX) CY - Brussels, Belgium DA - 31.01.2018 KW - Explosion protection KW - Standardisation KW - Explosionsschutz KW - Normung PY - 2018 AN - OPUS4-44174 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grätz, Rainer T1 - IEC TC 31/SC 31M and CEN TC 305 N2 - Overview about the status of european and international standardisation in the field of explosion protection of nonelectrical equipment and protective systems. T2 - Co-ordination of Notified Bodies - Directive 2014/34/EU of the European Parliament and of the Council (ATEX), 20th ExNB-Meeting, Brussels CY - Brussels, Belgium DA - 06.02.2017 KW - Explosion protection KW - Standardisation KW - Explosionsschutz KW - Normung PY - 2017 AN - OPUS4-39255 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Helmecke, E. A1 - Fleßner, M. A1 - Kaufmann, M. A1 - Staude, Andreas A1 - Hausotte, T. T1 - Numerical measurement uncertainty determination for dimensional measurements of microparts with CT N2 - Up to now, the only standardized method to determine the measurement uncertainty for computed tomography (CT) is to use calibrated workpieces as specified in the Guideline VDI/VDE 2630 Part 2.1. This paper discusses a promising numerical method for uncertainty determination with help of a virtual metrological CT (VMCT). It gives an explanation of the adjustments, the input parameters and the execution of the simulation. Furthermore, it discusses the first results of uncertainty determination compared to the method of using calibrated workpieces with the aid of two example cases. T2 - 6th Conference on Industrial Computed Tomography (iCT) CY - Wels, Austria DA - 09.02.2016 KW - simulation KW - Simulation KW - Computertomographie KW - Dimensionelle Metrologie KW - Normung KW - numerische Messunsicherheitsbestimmung KW - computed tomography KW - dimensional metrology KW - standardization KW - numerical uncertainty determination PY - 2016 UR - http://www.ndt.net/article/ctc2016/papers/ICT2016_paper_id17.pdf SP - Paper ID17, 1 EP - 7 AN - OPUS4-35481 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wiegner, Katharina A1 - Hahn, Oliver A1 - Farke, M. A1 - Stephan, Ina A1 - Nohr, Michael A1 - Horn, Wolfgang T1 - Development of methods for testing of microbiological contamination of small climate control units for air in display cases N2 - Museums worldwide are equipped with different display cases. Exhibit display cases should protect cultural objects from dust as well as from mechanical and physical damage. To ensure a stable climate inside the display cases, a low air exchange rate is operated. Typically air exchange rates are often smaller than 0.1 d'1 (Torge, 2000). Furthermore display cases are often operated with constant temperature and relative humidity. A relative humidity for parchment, leather, wooden sculptures of e.g. 60 % (Stolow, 1988) is suited for the protection of exhibits against external influences like fluctuation of humidity and temperature. T2 - Healthy Buildings 2012 - 10th International conference CY - Brisbane, Australia DA - 08.07.2012 KW - Microbiological contamination KW - Acetic and formic acid KW - Conductivity KW - Climate control device KW - Display case KW - Normung KW - Geruch KW - Messmethoden KW - Emissionsmessung KW - Bauprodukte PY - 2012 SN - 978-1-921897-40-5 SP - 1 EP - 2 (5H.2) AN - OPUS4-27562 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, B. A1 - Jann, Oliver A1 - Horn, Wolfgang A1 - Panaskova, J. A1 - Müller, D. A1 - Plehn, W. T1 - Sensory tests for building materials and rooms - Status of the standardisation N2 - To control the emission of pollutants from building materials, a few different voluntary labelling Systems have been introduced in Europe. In Germany mandatory “Principles for the health assessment of construction products used in interiors” have also been applied for the technical approval of floor coverings since 2004. All of these both voluntary and mandatory Systems combine measurements of volatile organic compounds according to ISO 16000-9 and sensory evaluations (new ISO 16000-28). In this paper a German project financed by the Umweltbundesamt (Federal Environmental Agency) will be presented. The project deals with the questions of how to combine the emission tests with the sensory evaluation and what the best sensory evaluation procedure is for achieving valid and accurate results. The limited values and the evaluation methods will be presented and discussed. In the next Step the criteria for labelling those products without an unpleasant odour will be determined. The current Status of ISO 16000 - 28 and 30 will be also presented. T2 - Healthy Buildings 2012 - 10th International conference CY - Brisbane, Australia DA - 08.07.2012 KW - Sensory evaluation of building materials and rooms KW - Perceived air quality KW - Standardisation KW - Label KW - Normung KW - Geruch KW - Messmethoden KW - Emissionsmessung KW - Bauprodukte PY - 2012 SN - 978-1-921897-40-5 SP - 1 EP - 6 (3E.5) AN - OPUS4-27561 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Tikhomirov, D. A1 - Schwenk, Christopher T1 - Efficient numerical welding simulation through standardisation KW - Schweißen KW - Simulation KW - Normung PY - 2010 SN - 1612-3433 VL - 9 IS - 5 SP - 292 EP - 295 PB - DVS - German Welding Society CY - Düsseldorf AN - OPUS4-22038 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Migoun, Nikolai A1 - Gnusin, Alexandr A1 - Stadthaus, Meinhard A1 - Jaenisch, Gerd-Rüdiger T1 - New Potentials of Penetrant Testing T2 - 9th European Conference on NDT CY - Berlin, Germany DA - 2006-09-25 KW - Eindringprüfung KW - Eindringmittel KW - Normung PY - 2006 SN - 3-931381-86-2 SP - 1(?) EP - 6(?) PB - European Federation for Non-Destructive Testing CY - Berlin AN - OPUS4-13797 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Matschat, Ralf A1 - Haßler, J. A1 - Traub, Heike A1 - Dette, Angelika T1 - Multielement trace determination in SiC powders: assessment of interlaboratory comparisons aimed at the validation and standardization of analytical procedures with direct solid sampling based on ETV ICP OES and DC arc OES N2 - The members of the committee NMP 264 Chemical analysis of non-oxidic raw and basic materials of the German Standards Institute (DIN) have organized two interlaboratory comparisons for multielement determination of trace elements in silicon carbide (SiC) powders via direct solid sampling methods. One of the interlaboratory comparisons was based on the application of inductively coupled plasma optical emission spectrometry with electrothermal vaporization (ETV ICP OES), and the other on the application of optical emission spectrometry with direct current arc (DC arc OES). The interlaboratory comparisons were organized and performed in the framework of the development of two standards related to the determination of mass fractions of metallic impurities in powders and grain sizes of ceramic raw and basic materials by both methods. SiC powders were used as typical examples of this category of material. The aim of the interlaboratory comparisons was to determine the repeatability and reproducibility of both analytical methods to be standardized. This was an important contribution to the practical applicability of both draft standards. Eight laboratories participated in the interlaboratory comparison with ETV ICP OES and nine in the interlaboratory comparison with DC arc OES. Ten analytes were investigated by ETV ICP OES and eleven by DC arc OES. Six different SiC powders were used for the calibration. The mass fractions of their relevant trace elements were determined after wet chemical digestion. All participants followed the analytical requirements described in the draft standards. In the calculation process, three of the calibration materials were used successively as analytical samples. This was managed in the following manner: the material that had just been used as the analytical sample was excluded from the calibration, so the five other materials were used to establish the calibration plot. The results from the interlaboratory comparisons were summarized and used to determine the repeatability and the reproducibility (expressed as standard deviations) of both methods. The calculation was carried out according to the related standard. The results are specified and discussed in this paper, as are the optimized analytical conditions determined and used by the authors of this paper. For both methods, the repeatability relative standard deviations were <25%, usually ~10%, and the reproducibility relative standard deviations were <35%, usually ~15%. These results were regarded as satifactory for both methods intended for rapid analysis of materials for which decomposition is difficult and time-consuming. Also described are some results from an interlaboratory comparison used to certify one of the materials that had been previously used for validation in both interlaboratory comparisons. Thirty laboratories (from eight countries) participated in this interlaboratory comparison for certification. As examples, accepted results are shown from laboratories that used ETV ICP OES or DC arc OES and had performed calibrations by using solutions or oxides, respectively. The certified mass fractions of the certified reference materials were also compared with the mass fractions determined in the interlaboratory comparisons performed within the framework of method standardization. Good agreement was found for most of the analytes. KW - Inductively coupled plasma optical emission spectrometry KW - Electrothermal vaporization KW - ETV ICP OES KW - Direct current optical emission spectrometry KW - DC arc OES KW - Direct solid sampling technique KW - Silicon carbide powder KW - Method validation KW - Method standardization KW - Direkte Feststoffanalytik KW - Normung KW - Methodenvalidierung KW - Ringversuche KW - Siliciumcarbid PY - 2005 DO - https://doi.org/10.1007/s00216-005-3415-x SN - 1618-2642 SN - 1618-2650 VL - 383 IS - 7-8 SP - 1060 EP - 1074 PB - Springer CY - Berlin AN - OPUS4-10890 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dabrowski, A A1 - Robens, E. A1 - Klobes, Peter A1 - Meyer, Klaus A1 - Podkoscielny, P. T1 - Standardization of Methods for Characterizing the Surface Geometry of Solids N2 - Since a comprehensive survey published in 1999 [1] much work was done in standardizing measuring methods to characterize the surface geometry of dispersed and/or porous solids and to certify reference materials. The present paper is an extension of a short communication [2]. It gives a survey on existing standards and reports on new drafts and proposals. KW - Particle KW - Pore KW - Reference material KW - Standardization KW - Surface KW - Partikel KW - Poren KW - Oberfläche KW - Normung KW - Referenzmaterialien PY - 2003 DO - https://doi.org/10.1002/ppsc.200390037 SN - 0934-0866 SN - 1521-4117 VL - 20 IS - 5 SP - 311 EP - 322 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-5196 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Heidt, Heinrich T1 - Image Quality in Industrial Radiography - a crucial safety factor KW - ISO KW - Normung KW - Radiografie KW - Bildqualität PY - 2004 SN - 1729-8709 SN - 0303-805X VL - 1 IS - 10 SP - 28 EP - 29 PB - International Organization for Standardization CY - Genève AN - OPUS4-5049 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Robens, E. A1 - Rübner, Katrin A1 - Staszczuk, P. T1 - Gravimetric Measurement of Water Vapour Sorption, Moisture and Dry Mass N2 - The gravimetric measurement of the moisture content of solids is discussed in comparison to other usual methods. Results of measurements of silica gel are reported. Furthermore, we inform on standardisation work. KW - Adsorption KW - Gravimetry KW - Humidity KW - Moisture content KW - Water vapour KW - Feuchte KW - Feuchtigkeit KW - Wasser KW - Sorption KW - Trocknung KW - Normung KW - Poren KW - Oberfläche PY - 2004 DO - https://doi.org/10.1023/B:JTAN.0000028043.06679.53 SN - 1388-6150 SN - 1418-2874 SN - 0368-4466 SN - 1572-8943 VL - 76 IS - 2 SP - 639 EP - 646 PB - Kluwer Academic Publ. CY - Dordrecht AN - OPUS4-4117 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Greenwood, J. A1 - Schröder, Hartmut A1 - Trubiroha, Peter A1 - Franke, P. A1 - Hufenus, R. T1 - Durability standards for goesynthetics - The tests for weathering and biological resistance T2 - 1st European Geosynthetics Conference (EUROGEO 1) CY - Maastricht, The Netherlands DA - 1996-09-30 KW - Bewitterung KW - Beständigkeit KW - Material, geosynthetisch KW - Normung PY - 1996 SN - 90-5410-836-3 SP - 637 EP - 642 PB - Balkema CY - Rotterdam AN - OPUS4-644 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Reiners, Georg T1 - Standards for thin film technologies T2 - 5th International Symposium on Trends and New Applications in Thin Films ; TATF '96 CY - Colmar, France DA - 1996-04-01 KW - Normung KW - Dünnschichttechnologie PY - 1996 N1 - Serientitel: Le vide, les couches minces, Suppl. – Series title: Le vide, les couches minces, Suppl. VL - 279 IS - 179 SP - 1 EP - 23 PB - sfv CY - Paris AN - OPUS4-635 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -