TY - JOUR A1 - Starkholm, A. A1 - Al-Sabbagh, Dominik A1 - Sarisozen, S A1 - von Reppert, A A1 - Rössle, M A1 - Ostermann, Markus A1 - Unger, E A1 - Emmerling, Franziska A1 - Kloo, L A1 - Svensson, P A1 - Lang, F A1 - Maslyanchuk, O. T1 - Green Fabrication of Sulfonium-Containing Bismuth Materials for High-Sensitivity X-Ray Detection N2 - Organic–inorganic hybrid materials based on lead and bismuth have recently been proposed as novel X- and gamma-ray detectors for medical imaging, non-destructive testing, and security, due to their high atomic numbers and facile preparation compared to traditional materials like amorphous selenium and Cd(Zn)Te. However, challenges related to device operation, excessively high dark currents, and long-term stability have delayed commercialization. Here, two novel semiconductors incorporating stable sulfonium cations are presented, [(CH3CH2)3S]6Bi8I30 and [(CH3CH2)3S]AgBiI5, synthesized via solvent-free ball milling and fabricated into dense polycrystalline pellets using cold isostatic compression, two techniques that can easily be upscaled, for X-ray detection application. The fabricated detectors exhibit exceptional sensitivities (14 100–15 190 µC Gyair−1 cm−2) and low detection limits (90 nGyair s−1 for [(CH3CH2)3S]6Bi8I30 and 78 nGyair s−1 for [(CH3CH2)3S]AgBiI5), far surpassing current commercial detectors. Notably, they maintain performance after 9 months of ambient storage. The findings highlight [(CH3CH2)3S]6Bi8I30 and [(CH3CH2)3S]AgBiI5 as scalable, cost-effective and highly stable alternatives to traditional semiconductor materials, offering great potential as X-ray detectors in medical and security applications. KW - Mechanochemistry KW - X-ray detectors PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-630306 DO - https://doi.org/10.1002/adma.202418626 SP - 1 EP - 10 PB - Wiley VHC-Verlag AN - OPUS4-63030 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stawski, Tomasz A1 - Karafiludis, Stephanos A1 - Pimentel, Carlos A1 - Montes-Hernández, German A1 - Kochovski, Zdravko A1 - Bienert, Ralf A1 - Weimann, Karin A1 - Emmerling, Franziska A1 - Scoppola, Ernesto A1 - Van Driessche, Alexander E.S. T1 - Solution-driven processing of calcium sulfate: The mechanism of the reversible transformation of gypsum to bassanite in brines N2 - Here, we show that calcium sulfate dihydrate (gypsum) can be directly, rapidly and reversibly converted to calcium sulfate hemihydrate (bassanite) in high salinity solutions (brines). The optimum conditions for the efficient production of bassanite in a short time (<5 min) involve the use of brines with c(NaCl) > 4 M and maintaining a temperature, T > 80 °C. When the solution containing bassanite crystals is cooled down to around room temperature, eventually gypsum is formed. When the temperature is raised again to T > 80 °C, bassanite is rapidly re-precipitated. This contrasts with the better-known behaviour of the bassanite phase in low-salt environments. In low-salinity aqueous solutions, bassanite is considered to be metastable with respect to gypsum and anhydrite, and therefore gypsum-to-bassanite conversion does not occur in pure water. Interestingly, the high-salinity transformation of gypsum-to-bassanite has been reported by many authors and used in practice for several decades, although its very occurrence actually contradicts numerical thermodynamic predictions regarding solubility of calcium sulfate phases. By following the evolution of crystalline phases with in situ and time-resolved X-ray diffraction/scattering and Raman spectroscopy, we demonstrated that the phase stability in brines at elevated temperatures was inaccurately represented in the thermodynamic databases. Most notably for c(NaCl) > 4 M, and T > 80 °C gypsum becomes readily more soluble than bassanite, which induces the direct precipitation of the latter from gypsum. The fact that these transformations are controlled by the solution provides extensive opportunities for precise manipulation of crystal formation. Our experiments confirmed that bassanite remained the sole crystalline phase for many hours before reverting into gypsum. This property is extremely advantageous for practical processing and efficient crystal extraction in industrial scenarios. KW - Industrial and Manufacturing Engineering KW - Strategy and Management KW - General Environmental Science KW - Renewable Energy, Sustainability and the Environment KW - Building and Construction KW - Calcium sulfate KW - Gypsum KW - Bassanite KW - Scattering KW - Raman KW - In situ KW - Synchrotron KW - BESSY KW - MySpot PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-594698 UR - https://www.sciencedirect.com/science/article/pii/S0959652624004591#appsec1 DO - https://doi.org/10.1016/j.jclepro.2024.141012 SN - 0959-6526 VL - 440 SP - 1 EP - 12 PB - Elsevier B.V. AN - OPUS4-59469 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stawski, Tomasz A1 - Smales, Glen Jacob A1 - Scoppola, E. A1 - Jha, D. A1 - Morales, L. F. G. A1 - Moya, A. A1 - Wirth, R. A1 - Pauw, Brian Richard A1 - Emmerling, Franziska A1 - Van Driessche, A. E. S. T1 - Seeds of imperfection rule the mesocrystalline disorder in natural anhydrite single crystals N2 - In recent years, we have come to appreciate the astounding intricacies associated with the formation of minerals from ions in aqueous solutions. In this context, a number of studies have revealed that the nucleation of calcium sulfate systems occurs nonclassically, involving the aggregation and reorganization of nanosized prenucleation species. In recent work, we have shown that this particle-mediated nucleation pathway is actually imprinted in the resultant micrometer-sized CaSO4 crystals. This property of CaSO4 minerals provides us with the unique opportunity to search for evidence of nonclassical nucleation pathways in geological environments. In particular, we focused on large anhydrite Crystals extracted from the Naica Mine in Mexico. We were able to shed light on this mineral's growth history by mapping defects at different length scales. Based on this, we argue that the nanoscale misalignment of the structural subunits, observed in the initial calcium sulfate crystal seeds, propagates through different length scales both in morphological, as well as in strictly crystallographic aspects, eventually causing the formation of large mesostructured single crystals of anhydrite. Hence, the nonclassical nucleation mechanism introduces a “seed of imperfection,” which leads to a macroscopic “single” crystal whose fragments do not fit together at different length scales in a self-similar manner. Consequently, anisotropic voids of various sizes are formed with very welldefined walls/edges. However, at the same time, the material retains in part its single crystal nature. KW - Calcium sulfate KW - Anhydrite KW - Mesocrystal KW - Nucleation KW - Naica PY - 2021 DO - https://doi.org/10.1073/pnas.2111213118 SN - 0027-8424 VL - 118 IS - 48 SP - 1 EP - 11 PB - National Academy of Sciences (USA) CY - Washington AN - OPUS4-53820 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stephan, H. A1 - Kubeil, M. A1 - Emmerling, Franziska A1 - Müller, C.E. T1 - Polyoxometalates as versatile enzyme inhibitors N2 - Polyoxometalates (POMs) are inorganic cluster compounds that have been shown to possess a number of pharmacological properties, including antidiabetic, antibacterial, antiprotozoal, antiviral and anticancer activities. Their molecular mechanism of action is largely unknown. However, several studies indicate that many of their activities may be due to the inhibition of enzymes, in particular, of those enzymes that are accessible from the extracellular space and do not require the penetration of cell membranes. In this review, we describe the recent progress in the preparation and optimization of POMs, and an evaluation of their use as inhibitors of different families of enzymes. The next important steps in this area of research will be to gain a better understanding of the interactions of POMs with enzymes on a structural level through an X-ray crystallographic study of enzyme–POM complexes and the analysis of structure–activity relationships. Furthermore, POMs with increased stability and in vivo half-lives have to be prepared. Surface modification may allow the targeting of POM drugs at their sites of action. KW - Cluster compounds KW - Poly­oxometalates KW - Metalloprotein mimics KW - Enzymes KW - Inhibitors KW - Bioinorganic chemistry PY - 2013 DO - https://doi.org/10.1002/ejic.201201224 SN - 1434-1948 SN - 1099-0682 VL - 2013 IS - 10-11 SP - 1585 EP - 1594 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-28076 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stolar, Tomislav A1 - Alić, Jasna A1 - Casali, Lucia A1 - Gugin, Nikita A1 - Baláž, Matej A1 - Michalchuk, Adam A1 - Emmerling, Franziska ED - Stolar, Tomislav T1 - Mechanochemistry: Looking back and ahead N2 - Starting with the discovery of fire and the preparation of food in prehistoric times, mechanochemistry is the oldest form of chemistry that humans have controlled. Mechanochemical practices, such as grinding with a mortar and pestle, continued into the Middle Ages until dedicated scientific studies began in the 19th century. Since then,research in mechanochemistry has shown that many chemicalreactions can be performed via mechanical force without or with small amounts of solvent. Besides being time, material, and energy efficient, mechanochemical reactions often yield products that differ from those obtained in solution. Therefore, not only is mechanochemistry greener and more sustainable than conventional solution chemistry, but it also has the added value of providing new reactivity and selectivity. This is especially important today, when chemists need to invent high-performance materials, intermediates, and products with the use of sustainable feedstocks and develop environmental remediation pathways. At the same time, time-resolved in situ monitoring and computational modeling are necessary for addressing fundamental questions about the atomistic, molecular, and electronic nature of mechanochemical reactivity. Integrating digitalization, robotics, and artificial intelligence tools promises to increase the reproducibility and scalability of mechanochemical processes. Further evolution of mechanochemistry is expected to have a transformative effect on the chemical industry. KW - Mechanochemistry PY - 2026 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-653962 DO - https://doi.org/10.1016/j.chempr.2025.102880 SN - 2451-9294 VL - 12 IS - 2 SP - 1 EP - 27 PB - Elsevier BV AN - OPUS4-65396 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stolar, Tomislav A1 - Bayram, Dilara A1 - May, Anastasia A1 - Sundermann, Remie A1 - Prinz, Carsten A1 - Meyer, Klas A1 - Myxa, Anett A1 - Falkenhagen, Jana A1 - Emmerling, Franziska T1 - Selective mechanochemical conversion of post-consumer polyethylene terephthalate waste into hcp and fcu UiO-66 metal–organic frameworks N2 - Single-use plastics strongly contribute to plastic pollution, and less than 10% of plastic waste is recycled globally. Here, we present a selective mechanochemical protocol for converting post-consumer polyethylene terephthalate (PET) transparent bottles and coloured textile waste into the porous metal–organic framework (MOF) UiO-66 materials. We used time-resolved in situ (TRIS) synchrotron powder X-ray diffraction and Raman spectroscopy to monitor the depolymerization of PET during ball milling. To convert disodium terephthalate to UiO-66, we developed base and base-free synthetic routes that lead to fcu and hcp UiO-66 phases, respectively, including the first ever synthesis of hcp UiO-66 by mechanochemistry. Our results demonstrate the potential of mechanochemistry to selectively access fcu and hcp UiO-66 phases using post-consumer PET waste. KW - Mechanochemistry PY - 2026 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-653958 DO - https://doi.org/10.1039/D4MR00126E SN - 2976-8683 SP - 1 EP - 8 PB - Royal Society of Chemistry (RSC) AN - OPUS4-65395 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stroh, Julia A1 - Ali, Naveed Zafar A1 - Maierhofer, Christiane A1 - Emmerling, Franziska T1 - Ettringite via Mechanochemistry: A Green and Rapid Approach for Industrial Application N2 - Here, we report on a first mechanochemical synthesis of ettringite, an important cement hydrate phase. The mineral compound ettringite ([Ca3Al(OH)6]2·(SO4)3·26H2O) occurs rarely in nature, but is common for cement-based materials. Ettringite has wide technical application in the ceramic and paper industry. However, its typical wet-chemical synthesis is cumbersome and produces waste water and CO2 emissions. Here, we investigate the first mechanochemical synthesis of ettringite for developing an easy and sustainable alternative for industrial application. The mechanosynthesis was monitored in situ by coupled synchrotron X-ray diffraction (XRD) and infrared thermography (IRT). The consumption of the reactants and the formation of the reaction product were monitored with time-resolved XRD. IRT showed the temperature increase based on the exothermic reaction. The reaction conversion was significantly improved changing the strategy of the mechanosynthesis from a one- to a two-step process. The latter included neat pregrinding of solid reactants followed by a delayed addition of the stoichiometric amount of water. Thus, an increase of reaction conversion from 34 to 94% of ettringite could be achieved. KW - XRD KW - Mechanochemistry KW - Ettringite KW - In situ PY - 2019 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-479016 DO - https://doi.org/10.1021/acsomega.9b00560 SN - 2470-1343 VL - 4 IS - 4 SP - 7734 EP - 7737 PB - ACS Publications CY - Washington, DC AN - OPUS4-47901 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stroh, Julia A1 - Feiler, Torvid A1 - Ali, N. Z. A1 - Minas da Piedade, M. E. A1 - Emmerling, Franziska T1 - Mechanistic Insights into a Sustainable Mechanochemical Synthesis of Ettringite N2 - Mechanochemistry offers an environmentally benign and facile synthesis method for a variety of cement paste constituents. In addition, these methods can be used to selectively tune the properties of cement components. The mineral ettringite is an important component of cementitious materials and has additional technological potential due to its ion exchange properties. Synthesis of ettringite via mechanochemistry is an environmentally friendly alternative to conventional wet-chemical synthesis established in industry. This contribution explores the mechanism of a two-step mechanochemical synthesis of ettringite, which was previously found to greatly improve the reaction conversion as compared with one-pot synthesis. The crystallinity of Al(OH)3 was found to decrease during the first stage of this mechanochemical synthesis. This was correlated to a significant decrease in the particle size of Al(OH)3 in this stage. No other significant changes were found for the other components, suggesting that mechanochemical activation of Al(OH)3 is responsible for the enhanced formation of ettringite by the two-step approach. The environmentally friendly approach developed for ettringite synthesis offers a versatile synthetic strategy, which can be applied to synthesise further cementitious materials. KW - Ettringite KW - Mechanochemistry KW - Sustainability KW - X-ray diffraction PY - 2019 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-489172 DO - https://doi.org/10.1002/open.201900215 VL - 8 IS - 7 SP - 1012 EP - 1019 PB - ChemPubSoc AN - OPUS4-48917 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stroh, Julia A1 - Meng, Birgit A1 - Emmerling, Franziska T1 - Monitoring of sulphate attack on hardened cement paste studied by synchrotron XRD N2 - The complex matter of external sulphate attack on cement-based construction materials is still not completely understood. The concentration of sulphate is a crucial factor for the formation of secondary phases and phase transitions of cement hydrates due to sulphate ingress into the microstructure. The sulphate attack on building materials for high and low sulphate concentrations was monitored by laboratory experiments. Hardened cement paste consisting of ordinary Portland cement (CEM I) were exposed to aqueous solutions of sodium sulphate for 18 months. Three sample compositions were used for this research, including different supplementary cementitious materials (SCM). The phase composition was determined for different time spans by high resolution synchrotron X-ray diffraction. Cross sections of exposed cement prisms were investigated as a representation of the microstructural profile. Based on the data, a temporal and spatial determination of the stages of the sulphate attack and the deterioration course was possible. Cement matrices blended with slag showed the highest resistance against sulphate attack. KW - Cement paste KW - Sulphate attack KW - Mineral additions KW - Concentration KW - Monitoring PY - 2015 DO - https://doi.org/10.1016/j.solidstatesciences.2015.08.006 SN - 1293-2558 SN - 1873-3085 VL - 48 SP - 278 EP - 285 PB - Elsevier Masson SAS CY - Amsterdam AN - OPUS4-34281 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stroh, Julia A1 - Meng, Birgit A1 - Emmerling, Franziska T1 - Deterioration of hardened cement paste under combined sulphatechloride attack investigated by synchrotron XRD N2 - The exact mechanisms of the phase transitions caused by a combined sulphate-chloride attack are discussed controversially. The main points concern the mutual influences of sulphate and chloride ions during the secondary binding processes of these anions within cement hydrate phases. We simulated combined sulphate-chloride attack under laboratory conditions using solutions containing NaCl and Na2SO4 in different concentrations. Three sample compositions were used for the preparation of the specimens. In two of them, 30% of Portland cement was replaced by supplementary cementitious materials (fly ash, slag). The phase distribution in the samples was determined using synchrotron X-ray diffraction. The analysis with high spatial resolution allows the localisation of the secondary phase formation in the microstructural profile of the sample. A mechanism of the phase developments under combined sulphate-chloride attack is derived. KW - Cement paste KW - Sulphate-chloride attack KW - Portland cement KW - Mineral additions PY - 2016 DO - https://doi.org/10.1016/j.solidstatesciences.2016.04.002 IS - 56 SP - 29 EP - 44 PB - Elsevier Masson SAS CY - Issy les Moulineaux cedex; France AN - OPUS4-35936 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stroh, Julia A1 - Schlegel, Moritz-Caspar A1 - Irassar, E.F. A1 - Meng, Birgit A1 - Emmerling, Franziska T1 - Applying high resolution SyXRD analysis on sulfate attacked concrete field samples N2 - High resolution synchrotron X-ray diffraction (SyXRD) was applied for a microstructural profile analysis of concrete deterioration after sulfate attack. The cement matrices consist of ordinary Portland cement and different amounts of supplementary cementitious materials, such as fly ash, natural pozzolana and granulated blast furnace slag. The changes of the phase composition were determined along the direction of sulfate ingress. This approach allows the identification of reaction fronts and zones of different phase compositions and conclusions about the mechanisms of sulfate attack. Two reaction fronts were localized in the initial 4 mm from the sample surface. The mechanism of deterioration caused by the exposition in the sulfate-bearing soil is discussed. SyXRD is shown to be a reliable method for investigation of cementitious materials with aggregates embedded in natural environments. KW - X-ray diffraction (B) KW - High resolution KW - Degradation (C) KW - Sulfate attack (C) KW - Concrete (E) PY - 2014 DO - https://doi.org/10.1016/j.cemconres.2014.07.015 SN - 0008-8846 SN - 1873-3948 VL - 66 SP - 19 EP - 26 PB - Pergamon Press CY - New York, NY AN - OPUS4-31253 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stroh, Julia A1 - Schlegel, Moritz-Caspar A1 - Schmidt, Wolfram A1 - Nguyen, Thi Yen A1 - Meng, Birgit A1 - Emmerling, Franziska T1 - Time-resolved in situ investigation of Portland cement hydration influenced by chemical admixtures N2 - Numerous admixtures are used in the building practice to customize the properties of the cement paste during application. The influences of admixtures on the course of cement hydration and formation of hydrate phases have to be considered. Polycarboxylate ether (PCE) based polymeric superplasticizers (SPs) are known to retard the setting of the cement paste. The extent of the retardation differs depending on the molecular structure of the SP. Additionally, the presence of a stabilizing agent (SA) in the cement paste has a retarding side effect on the setting. The initial cement hydration processes and the detailed mechanisms of the retardation influenced by PCEs, as well as their interactions with particular SAs, are insufficiently understood. Up to now, only the results of phenomenological studies were taken into account to describe this retardation process. A detailed structure analysis monitoring the change of the phase composition during the hydration was never applied. Both SP and SA affect the adsorption of the sulphate ions on the clinker particles, causing changes in the formation of ettringite during the initial hydration, and are therefore a crucial part of the setting process itself. Here, the initial hydration of cement influenced by the interaction of SP and SA was monitored in situ by synchrotron X-ray diffraction. The high time resolution of the measurements allowed a continuous detection of the hydrates formed. The hydration was followed from the starting point of water addition and for couple of hours afterwards. The hydration of the levitated cement pellets containing starch as SA was initialized by adding aqueous solutions of different commercial SPs. Changes in the ettringite formation were detected in comparison to the reference hydration of pure cement. KW - Synchrotron KW - Portland cement Initial hydration KW - Superplasticizer KW - Stabilizer KW - XRD PY - 2016 DO - https://doi.org/http://dx.doi.org/10.1016/j.conbuildmat.2015.12.097 IS - 106 SP - 18 EP - 26 PB - Elsevier AN - OPUS4-35467 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stößer, R. A1 - Feist, M. A1 - Patzwaldt, K. A1 - Menzel, Michael A1 - Emmerling, Franziska ED - Brooks, H. T1 - Redox reactions of K3[Fe(CN)6] during mechanochemically stimulated phase transitions of AlOOH N2 - Thermally induced redox reactions of K3[Fe(CN)6] (1) were investigated for a broad temperature range by thermal methods and structure analytical methods (ESR and Mößbauer spectroscopy, X-ray Powder diffraction and XANES). Based on the influence of the mechanically activated and transforming matrices 2 and 3, redox processes can be tuned to form doped Al2O3 systems which contain either isolated Fe3+ centres or redox active phases and precursors like (Al1-xFex)2O3 (4), (Al3-xFex)O4 (5), Fe3O4, Fe2O3 and Fe0. The phase Fe3C and the chemically reactive C-species were detected during the reaction of 1. The final composition of the doped products of α-Al2O3 is mainly influenced by the chemical nature of the Fe doping component, the applied temperature and time regime, and the composition of the gas phase (N2, N2/O2 or N2/H2). From the solid state chemistry point of view it is interesting that the transforming matrix (2 and 3) possesses both oxidative and protective properties and that the incorporation of the Fe species can be performed systematically. KW - A. Inorganic compounds KW - C. Mössbauer spectroscopy KW - C. Thermogravimetric analysis KW - D. Electron paramagnetic resonance KW - ESR-Spektroskopie KW - Kaliumhexacyanoferrat(III) KW - Mechanische Aktivierung KW - Mößbauer-Spektroskopie KW - Redoxreaktionen KW - TA-MS-Messungen PY - 2011 DO - https://doi.org/10.1016/j.jpcs.2011.03.016 SN - 0022-3697 VL - 72 IS - 6 SP - 794 EP - 799 PB - Pergamon Press CY - New York, NY AN - OPUS4-23685 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stößer, R. A1 - Feist, M. A1 - Willgeroth, Carola A1 - Emmerling, Franziska A1 - Menzel, Michael A1 - Reuther, H. T1 - The 'quiet Goldschmidt' - a mechanochemical, thermoanalytical, and spectroscopic study of selected steps of the aluminothermic reaction N2 - The Goldschmidt reaction (2Al+α-Fe2O3) was investigated both under mechanical and thermal activation by employing a combination of analytical methods such as ESR and Mössbauer spectroscopy, magnetic susceptibility, X-ray powder diffraction, and thermal analysis (TA). Both the mechanical treatment and the TA runs under air caused the reaction conditions of 'quiet redox reactions' due to a retarding effect and enabled a reaction study in a 'slow motion mode'. This allowed to establish distinct partial steps of the integral reaction process depending on the intensity of the mechanical impact, the educt composition, the gas phase composition, and, finally, the thermal excitation in the TA runs. Particular attention was payed to the role of the gas phase and to the reaction of aluminum with differently activated oxygen species. The phlegmatizing effect was traced back to the formation of Al2O3 coverages of the Al particles. KW - Thermite reaction KW - Iron ESR and Mössbauer spectroscopy KW - Mechanochemical activation KW - Magnetic moments KW - DTA-TG KW - XRD PY - 2013 DO - https://doi.org/10.1016/j.jssc.2013.02.032 SN - 0022-4596 SN - 1095-726X VL - 202 SP - 173 EP - 190 PB - Elsevier CY - San Diego, Calif. AN - OPUS4-29528 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Surov, A. A1 - Vasilev, N. A1 - Voronin, A. A1 - Churakov, A. A1 - Emmerling, Franziska A1 - Perlovich, G. T1 - Ciprofloxacin salts with benzoic acid derivatives: structural aspects, solid-state properties and solubility performance N2 - n this work, three new pharmaceutical hydrated salts of ciprofloxacin with selected derivatives of benzoic acid, namely 4-hydroxybenzoic acid, 4-aminobenzoic acid and gallic acid, were obtained and systematically investigated by several solid-state analytical techniques. In situ Raman spectroscopy was applied to elucidate the alternative pathways of the solid forms' formation under mechanochemical conditions. Crystal structure analysis and a CSD survey allowed us to establish a distinct supramolecular motif formed by infinite columnar stacks of ciprofloxacin dimers arranged in the “head-to-tail” manner. An alternative “head-to-head” packing arrangement was only observed in the crystal of the hydrated ciprofloxacin salt with 4-aminobenzoic acid. In addition, the pH-solubility behavior of the solid forms was thoroughly investigated. Furthermore, a distinct structure–property relationship between the specific features of the supramolecular organization of the hydrated salts and their solubility was observed and discussed. KW - Mechanochemistry KW - XRD PY - 2020 DO - https://doi.org/10.1039/D0CE00514B VL - 22 IS - 25 SP - 4238 EP - 4249 AN - OPUS4-51818 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Surov, Artem O. A1 - Vasilev, Nikita A. A1 - Churakov, Andrei V. A1 - Stroh, Julia A1 - Emmerling, Franziska A1 - Perlovich, German L. T1 - Solid Forms of Ciprofloxacin Salicylate: Polymorphism, Formation Pathways, and Thermodynamic Stability N2 - The crystallization of ciprofloxacin - an antibacterial fluoroquinolone compound - with salicylic acid resulted in the isolation of five distinct solid forms of the drug, namely, an anhydrous salt, two polymorphic forms of the salt monohydrate, methanol and acetonitrile solvates, and the salt-cocrystal hydrate. The salicylate salts were investigated by different analytical techniques ranging from powder and single crystal X-ray diffractometry, differential scanning calorimetry, thermogravimetric analysis, variable temperature powder X-ray diffraction, dynamic vapor sorption analysis, dissolution, and solubility investigations. Real-time in situ Raman spectroscopy was used to investigate the mechanochemical formation pathways of the different solid polymorphs of ciprofloxacin salicylate. The mechanism of the phase transformation between the crystalline forms was evaluated under mechanochemical conditions. It was found that the formation pathway and kinetics of the grinding process depend on the form of the starting material and reaction conditions. The analysis of the solid-state thermal evolution of the hydrated salts revealed the two-step mechanism of dehydration process, which proceeds through a formation of the distinct intermediate crystalline products. KW - Cocrystal KW - Polymorphism KW - Ciprofloxacin KW - XRD KW - DSC PY - 2019 DO - https://doi.org/10.1021/acs.cgd.9b00185 SN - 1528-7483 VL - 19 IS - 5 SP - 2979 EP - 2990 PB - American Chemical Society AN - OPUS4-47903 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Takao, S. A1 - Takao, K. A1 - Kraus, Werner A1 - Emmerling, Franziska A1 - Scheinost, A.C. A1 - Bernhard, G. A1 - Hennig, C. T1 - First hexanuclear U IV and Th IV formate complexes - Structure and stability range in aqueous solution N2 - The actinide(IV) hexanuclear [M6(μ3-O)4(μ3-OH)4(HCOO)12(LT)6] complexes were prepared (LT = H2O or CH3OH). Their structures were investigated by single-crystal X-ray analysis and XAFS spectroscopy. HCOO– acts as a bridging ligand, which prevents the formation of polynuclear hydrolysis species like UIV hydrous oxide colloids at least up to pH = 3.25, and stabilizes the nanosized clusters in solution. The charge of the hexamer is balanced by the O/OH ratio of the μ3-bridges.(© Wiley-VCH Verlag GmbH & Co. KGaA, 69451 Weinheim, Germany, 2009) KW - Actinides KW - Polynuclear species KW - Formic acid KW - Bridging ligands PY - 2009 DO - https://doi.org/10.1002/ejic.200900899 SN - 1434-1948 SN - 1099-0682 VL - 2009 IS - 32 SP - 4771 EP - 4775 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-20329 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Thünemann, Andreas A1 - Kegel, Jenny A1 - Polte, Jörg A1 - Emmerling, Franziska T1 - Superparamagnetic Maghemite Nanorods: Analysis by Coupling Field-Flow Fractionation and Small-Angle X-ray Scattering N2 - We report on the online coupling of asymmetrical flow field-flow fractionation (A4F) with small-angle X-ray scattering (SAXS) for the detection of nanoparticles. The A4F was used to fractionate superparamagnetic maghemite nanoparticles, which were prepared continuously with a micromixer. The outlet of the A4F was directly coupled to a flow capillary of a SAXSess instrument (Kratky type of camera). SAXS curves were recorded in a 1 s time interval. This was possible by using intense synchrotron radiation. The radii of gyration of the nanoparticles, as determined from Guinier plots, increased from 2 to 6 nm with increasing fractionation time of the A4F. A more detailed analysis of the scattering curves revealed that the particles were cylindrical in shape (nanorods), which we attributed to the micromixing preparation technique. The radii of the nanorods increased only slightly from 1.2 to 1.7 nm with increasing fractionation time, while the lengths increased strongly from 7.0 to 30.0 nm. The volume distribution of the nanorods was determined and described by Schultz-Zimm and log-normal distributions. Nanorod volumes increased from 45 to 263 nm³, corresponding to molar masses of 140 × 10³ to 820 × 10³ g mol-1. We propose A4F-SAXS coupling as a new method for analysis of nanoparticles of complex composition in solution. It allows precise online determination of the particle’s shape and size distributions. This method can be applied to mixtures of nanoparticles of arbitrary shapes and sizes (1-100 nm). Moreover, the total time needed for fractionation and online SAXS data recording is usually only 20 min. PY - 2008 DO - https://doi.org/10.1021/ac8004814 SN - 0003-2700 SN - 1520-6882 VL - 80 IS - 15 SP - 5905 EP - 5911 PB - American Chemical Society CY - Washington, DC AN - OPUS4-17813 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Trowitzsch-Kienast, W. A1 - Rühl, M. A1 - Kim, K.Y. A1 - Emmerling, Franziska A1 - Erben, U. A1 - Somasundaram, R. A1 - Freise, C. T1 - Absolute configuration of antifibrotic (+)-episesamin isolated from Lindera obtusiloba BLUME N2 - Fractionation of a 70% ethanolic extract from twigs of Lindera obtusiloba BLUME (Japanese spicebush, Tohaku) yielded fi ve fractions of different polarity. The antifi brotic activity within the chloroform phase was best assessed by an in vitro bioassay using rat hepatic stellate cell (HSC) proliferation and their autocrine transforming growth factor beta (TGF-β) expression as sensitive fibrosis-associated read out. Chromatography of the chloroform extract on Sephadex LH-20 or liquid-liquid extractions yielded a crystalline compound as an active principle, which was identifi ed from NMR and ESI-MS analyses, its melting point, and its optical rotation as (7S,7'S,8S,8'S)-3,4:3',4'-bis(methylenedioxy) -7,9':7',9-diepoxy-lignane [(+)-episesamin]. X-Ray diffraction confirmed the structure and provided, for the fi rst time, directly its absolute confi guration. (+)-Episesamin blocked proliferation and the profi brotic autocrine TGF-β expression HSC without signifi cant cytotoxicity. KW - TGF-beta KW - Liver Fibrosis KW - X-Ray Structure PY - 2011 SN - 0939-5075 SN - 0341-0382 SN - 0341-0471 VL - 66c IS - 9/10 SP - 460 EP - 464 PB - Verl. d. Zeitschrift für Naturforschung CY - Tübingen AN - OPUS4-24716 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Tuchalski, G. A1 - Emmerling, Franziska A1 - Gröger, K. A1 - Hänsicke, A. A1 - Nagel, T. A1 - Reck, Günter T1 - X-ray investigations of nebivolol and its isomers N2 - The molecular and crystal structures of the hydrochlorides of d-nebivolol, dl-nebivolol, and seven nebivolol isomers have been determined by X-ray structure analysis. The absolute configuration of all the compounds could be determined unambiguously using anomal dispersion effects. Two compounds, dl-nebivolol (NEB-1d,l) and the (S,R,S,R) nebivolol isomer (NEB-6), crystallize as racemic mixtures in the centrosymmetric space group P-1. d-Nebivolol and six nebivolol isomers crystallize in space group P212121. The d- and l-nebivolol molecules in NEB-1d and NEB-1d,l adopt a conformation which is significantly different compared with that of all nebivolol isomers. With the exception of dl-nebivolol (NEB-1d,l) numerous intermolecular hydrogen bonds connect the molecules forming molecular layers. KW - X-ray crystal structure KW - Nebivolol PY - 2006 DO - https://doi.org/10.1016/j.molstruc.2006.03.086 SN - 0022-2860 SN - 1872-8014 SN - 0377-046X VL - 800 IS - 1-3 SP - 28 EP - 44 PB - Elsevier CY - Amsterdam AN - OPUS4-13800 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -