TY - JOUR
A1 - Homann, Christian
A1 - Peeters, Régis
A1 - Mirmajidi, Hana
A1 - Berg, Jessica
A1 - Fay, Michael
A1 - Rodrigues, Lucas Carvalho Veloso
A1 - Radicchi, Eros
A1 - Jain, Akhil
A1 - Speghini, Adolfo
A1 - Hemmer, Eva
T1 - Rapid microwave-assisted synthesis of morphology-controlled luminescent lanthanide-doped Gd2O2S nanostructures
N2 - Gadolinium oxysulfide (Gd2O2S) is an attractive material of demonstrated suitability for a variety of imaging applications, leveraging its magnetic, scintillating, and luminescent properties, particularly when doped with optically active lanthanide ions (Ln3+). For many of these applications, control over size and morphology at the nanoscale is crucial. This study demonstrates the rapid microwave-assisted Synthesis of colloidal Ln2O2S (Ln = Gd and dopants Yb, Er, Tb) nanostructures in as little as 20 min. Structural characterization using X-ray diffraction analysis (XRD), Raman spectroscopy, as well as Transmission electron microscopy (TEM), including elemental mapping via energy dispersive X-ray spectroscopy (EDS), unveiled the key role of elemental sulphur (S8) in the reaction mixtures for materials growth. By systematically varying the Ln-to-S ratio from 1 : 0.5 to 1 : 15, controlled morphologies ranging from triangular nanoplatelets to berry- and flower-like shapes were achieved. Doping with Er3+/Yb3+ endowed the nano-triangles with upconverting and near-infrared emitting properties. Tb3+-doped Gd2O2S exhibited the characteristic green Tb3+ emission under UV excitation, while also showing X-ray excited optical luminescence (XEOL), rendering the material interesting as a potential nano-scintillator.
KW - Upconversion
KW - Microwave-assisted synthesis
KW - Synthesis
KW - Fluorescence
KW - Nano
KW - Particle
KW - NIR
KW - XRD
KW - X-ray fluoressence
KW - Morphology control
KW - Raman
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-647907
DO - https://doi.org/10.1039/D5TC01646K
SN - 2050-7526
VL - 13
IS - 35
SP - 18492
EP - 18507
PB - Royal Society of Chemistry (RSC)
AN - OPUS4-64790
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Rabin, Ira
ED - Binder, J.
T1 - The marginal notes of Tosefta MS Erfurt
N2 - Manuscript Erfurt 12 of the Tosefta (now Berlin, Staatsbibliothek, Ms. or. fol. 1220) is one of three major textual witnesses of the Tosefta. This manuscript has over 80 marginal notes which have not merited scholarly attention. This article presents a comprehensive analysis of all the marginal notes, including an evaluation of their ink composition, a palaeographic assessment of the scripts, as well as a philological assessment of their contents. Combining these methodologies differentiates between the glosses of the scribe and those added by later hands and identifies their provenance, allowing us to trace the history of the manuscript via the emendations that took place in the scholarly communities in which the manuscript was studied. One of the important outcomes of the research is an early dating of the manuscript to eleventh-century Italy, overturning the scholarly view which dates the manuscript to twelfth-century Rhineland
KW - Hebrew Manuscripts
KW - Ink
KW - NIR
KW - XRF
PY - 2025
DO - https://doi.org/10.3828/jjs.2025.76.2.272
SN - 0022-2097
VL - 76
IS - 2
SP - 272
EP - 300
AN - OPUS4-64770
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kossatz, Philipp
A1 - Mezhov, Alexander
A1 - Andresen, Elina
A1 - Prinz, Carsten
A1 - Schmidt, Wolfram
A1 - Resch-Genger, Ute
T1 - Assessing the Applicability of Lanthanide-Based Upconverting Nanoparticles for Optically Monitoring Cement Hydration and Tagging Building Materials
N2 - Chemically stable, lanthanide-based photon upconversion micro- and nanoparticles (UCNPs) with their characteristic multicolor emission bands in the ultraviolet (UV), visible (vis), near-infrared (NIR), and short-wave infrared (SWIR) arepromising optical reporters and barcoding tags. To assess the applicability of UCNPs for the monitoring of early stage cement hydration processes and as authentication tags for cementitious materials, we screened the evolution of the luminescence of Selfmade core-only NaYF4:Yb,Er UCNPs and commercial μm-sized Y2O2S:Yb,Er particles during the first stages of cement hydration, which largely determines the future properties of the hardened material. Parameters explored from the UCNP side included particle size, morphology, surface chemistry or coating, luminescence properties, and concentration in different cement mixtures. From the cement side, the influence of the mineral composition of the cement matrix was representatively examined for ordinary Portland cement (OPC) and its constituents tricalcium aluminate (C3A), tricalcium silicate (C3S), and gypsum at different water to cement ratios. Based on reflection and luminescence measurements, enabling online monitoring, which were complemented by XRD and isothermal heat-flow calorimetric measurements to determine whether the incorporation of these particles could impair cement hydration processes, well suited lanthanide particle reporters could be identified as well as application conditions. In addition, thereby the reporter influence on cement hydration kinetics could be minimized while still preserving a high level of information content. The best performance for the luminescence probing of changes during early stage cement hydration processes was observed for 25 nm-sized oleate (OA)-coated UCNPs added in a concentration of 0.1 wt %. Higher UCNP amounts of 1.0 wt % delayed cement hydration processes size- and surface coatingspecifically in the first 24 h. Subsequent luminescence stability screening studies performed over a period of about one year support the applicability of UCNPs as optical authentication tags for construction materials.
KW - Quality assurance
KW - Fluorescence
KW - Nano
KW - Particle
KW - Synthesis
KW - Quantum yield
KW - NIR
KW - Mechanism
KW - Characterization
KW - XRD
KW - Calorimetry
KW - Advanced material
KW - Cement
KW - Monitoring
KW - Surface
KW - Size
KW - Lifetime
KW - Barcode
KW - Lanthanide
KW - Upconversion
KW - Encoding
KW - Method
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-638318
DO - https://doi.org/10.1021/acsomega.5c02236
SN - 2470-1343
VL - 10
IS - 29
SP - 31587
EP - 31599
PB - ACS Publications
CY - Washington, DC
AN - OPUS4-63831
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Osiopova, Viktoriia
A1 - Tavernaro, Isabella
A1 - Ge, L.
A1 - Kitzmann, W. R.
A1 - Heinze, K.
A1 - Reithofer, M. R.
A1 - Resch-Genger, Ute
T1 - Complete protection of NIR-luminescent molecular rubies from oxygen quenching in air by L-arginine-mediated silica nanoparticles
N2 - The application of emerging luminophores such as near-infrared (NIR) emissive complexes based on earth-abundant chromium as central ion and triplet-triplet annihilation upconversion (TTA-UC) systems in air as optical reporters for bioimaging or photonic materials for energy conversion requires simple and efficient strategies for their complete protection from uminescence quenching by oxygen. Therefore, we explored the influence of sol–gel synthesis routes on the oxygen protection efficiency of the resulting core and core/shell silica nanoparticles (SiO2 NPs), utilizing the molecular ruby-type luminophores CrPF6 ([Cr(ddpd)2](PF6)3; ddpd = N,N'-dimethyl-N,N'-dipyridin-2-ylpyridin-2,6-diamine) and CrBF4 ([Cr(ddpd)2](BF4)3) with their oxygendependent, but polarity-, proticity-, viscosity-, and concentration-independent luminescence as optical probes for oxygen permeability. The sol–gel chemistry routes we assessed include the classical Stöber method and the underexplored Larginine approach, which relies on the controlled hydrolysis of tetraethoxysilane (TEOS) in a biphasic cyclohexane/water system with the catalyst L-arginine. As demonstrated by luminescence measurements of air- and argon-saturated dispersions of CrPF6- and CrBF4-stained SiO2 NPs of different size and particle architecture, utilizing the luminescence decay kinetics of argon-saturated solutions of CrPF6 and CrBF4 in acetonitrile (ACN) as benchmarks, only SiO2 NPs or shells synthesized by the L-arginine approach provided complete oxygen protection of the CrIII complexes under ambient conditions. We ascribe the different oxygen shielding efficiencies of the silica networks explored to differences in density and surface chemistry of the resulting nanomaterials and coatings, leading to different oxygen permeabilities. Our Larginine based silica encapsulation strategy can open the door for the efficient usage of oxygen-sensitive luminophores and TTA-UC systems as optical reporters and spectral shifters in air in the future.
KW - Quality assurance
KW - Fluorescence
KW - Quantification
KW - Advanced materials
KW - Nano
KW - Quantum yield
KW - NIR
KW - Characterization
KW - Electron microscopy
KW - Silica
KW - Synthesis
KW - Oxygen sensing
KW - Surface
KW - Doping
KW - Lifetime
KW - Cr(III) complex
KW - Shielding
KW - Sensing
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-638271
DO - https://doi.org/10.26599/NR.2025.94907241
SN - 1998-0000
VL - 18
IS - 3
SP - 1
EP - 13
PB - SciOpen
AN - OPUS4-63827
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Andreato, E.
A1 - Panov, N.
A1 - Artiga, A.
A1 - Osipova, Viktoriia
A1 - Resch-Genger, Ute
A1 - Ximendes, E.
A1 - Molina, P.
A1 - Canton, P.
A1 - Marin, R.
T1 - Indium-Based Fluoride Nanoparticles Doped with Chromium for Near-Infrared Luminescence
N2 - Transition metal (TM) and rare earth (RE) ion-doped nanoparticles (NPs) are photoluminescent materials of technological relevance in bioimaging, sensing, and light conversion. Fluoride NPs are particularly attractive in this context, since they combine low-energy phonons, high chemical stability, optical transparency, size, and architecture tunability. Yet, nearly all reported colloidal fluoride NPs (e.g., NaYF4 and LiYF4) can only be efficiently doped with RE3+ and not with luminescent TM ions. Herein, we contribute to filling this gap in materials science by reporting Na3InF6 NPs doped with Cr3+ as a model luminescent TM ion. We unveil the heat-driven NP formation mechanism, which involves a cubic-to-monoclinic phase conversion, similarly to the cubic-tohexagonal phase conversion in NaYF4. Reaction temperatures above 225 °C and reaction time have a limited impact on the NP morphology, while the amount of fluoride precursor and oleylamine grants control over the NP size. After verifying that Na3InF6 NPs show negligible cytotoxicity toward U-87 cell line, we study the optical properties of these NPs upon Cr3+ doping.
Temperature-dependent photoluminescence measurements indicate that Cr3+ ions experience a weak crystal field in the Na3InF6 host lattice, while their photoluminescence lifetime varies linearly in the 20−50 °C range. These results set the ground for further studies of photoluminescent TM-doped fluoride NPs, toward their applications in bioimaging, sensing, and light-converting devices.
KW - Quality assurance
KW - Fluorescence
KW - Traceability
KW - Nano
KW - Particle
KW - Synthesis
KW - Quantum yield
KW - NIR
KW - Mechanism
KW - Characterization
KW - XRD
KW - Phase transition
KW - Ligand
KW - Surface
KW - Doping
KW - Lifetime
PY - 2025
DO - https://doi.org/10.1021/acs.chemmater.4c03335
SN - 1520-5002
SP - 1
EP - 14
PB - American Chemical Society
AN - OPUS4-63073
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Richter, Maria
A1 - Güttler, Arne
A1 - Pauli, Jutta
A1 - Vogel, K.
A1 - Homann, Christian
A1 - Würth, Christian
A1 - Resch-Genger, Ute
T1 - Extending certified spectral fluorescence standards for the calibration and performance validation of fluorescence instruments to the NIR—closing the gap from 750 to 940 nm with two novel NIR dyes
N2 - Fluorescence techniques such as fluorescence spectroscopy, microfluorometry, and fluorescence microscopy, providing spectral, intensity, polarization, and lifetime information, are amongst the most broadly utilized analytical methods in the life and materials sciences. However, the measured fluorescence data contain sample- and instrument-specific contributions, which hamper their comparability across instruments and laboratories. Comparable, instrument-independent fluorescence data require the determination of the fluorescence instrument’s wavelength-dependent spectral responsivity, also termed emission correction curve, for the same instrument settings as those used for the fluorescence measurements as a prerequisite for the subsequent correction of the measured instrument-specific data. Such a spectral correction is essential for the performance comparison of different fluorescent labels and reporters, quantitative fluorescence measurements, the determination of the fluorescence quantum yield, and the spectroscopic measure for the fluorescence efficiency of a fluorophore. Simple-to-use tools for obtaining emission correction curves are chromophore-based reference materials (RMs), referred to as fluorescence standards, with precisely known, preferably certified instrument-independent fluorescence spectra. However, for the increasingly used near-infrared (NIR) wavelength region >700 nm, at present, no spectral fluorescence standards are available. To close this gap, we developed two novel spectral fluorescence standards, BAM F007 and BAM-F009, with broad emission bands from about 580 to 940 nm in ethanolic solution. These liquid fluorescence standards currently under certification, which will be released in 2025, will expand the wavelength range of the already available certified Calibration Kit BAM F001b-F005b from about 300–730 to 940 nm. In this research article, we will detail the criteria utilized for dye and matrix selection and the homogeneity and stability tests accompanying dye certification as well as the calculation of the wavelength-dependent uncertainty budgets of the emission spectra BAM F007 and BAM-F009, determined with the traceably calibrated BAM reference spectrofluorometer. These fluorescence standards can provide the basis for comparable fluorescence measurements in the ultraviolet, visible, and NIR for the fluorescence community.
KW - Quality assurance
KW - Reference material
KW - Fluorescence
KW - Dye
KW - Traceability
KW - Metrology
KW - Calibration
KW - Reference data
KW - Reference product
KW - Digital certificate
KW - NIR
KW - Instrument performance validation
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-626317
DO - https://doi.org/10.1007/s00216-024-05723-w
SN - 1618-2650
SP - 1
EP - 15
PB - Springer
AN - OPUS4-62631
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Wang, Cui
A1 - Ebel, Kenny
A1 - Heinze, Katja
A1 - Resch-Genger, Ute
A1 - Bald, Ilko
T1 - Quantum Yield of DNA Strand Breaks under Photoexcitation of a Molecular Ruby
N2 - Photodynamic therapy (PDT) used for treating cancer relies on the generation of highly reactive oxygen species, for example, singlet oxygen 1O2, by light-induced excitation of a photosensitizer (PS) in the presence of molecular oxygen, inducing DNA damage in close proximity of the PS. Although many precious metal complexes have been explored as PS for PDT and received clinical approval, only recently, the potential of photoactive complexes of nonnoble metals as PS has been discovered. Using the DNA origami technology that can absolutely quantify DNA strand break cross sections, we assessed the potential of the luminescent transition metal complex [Cr(ddpd)2]3+ (ddpd=N,N’-dimethyl-N,N’-dipyridine-2-ylpyridine-2,6-diamine) to damage DNA in an air-saturated aqueous environment upon UV/Vis illumination. The quantum yield for strand breakage, that is, the ratio of DNA strand breaks to the number of absorbed photons, was determined to 1–4%, indicating efficient transformation of photons into DNA strand breaks by [Cr(ddpd)2]3+.
KW - Fluorescence
KW - Synthesis
KW - Production
KW - Optical spectroscopy
KW - Ligand
KW - Photophysics
KW - Cr(III)
KW - Mechanism
KW - NIR
KW - PDT
KW - Singlet oxygen
KW - DNA
KW - Origami
KW - Quantum yield
PY - 2023
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-573631
DO - https://doi.org/10.1002/chem.202203719
SP - 1
EP - 7
AN - OPUS4-57363
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Stein, L.
A1 - Wang, Cui
A1 - Förster, C.
A1 - Resch-Genger, Ute
A1 - Heinze, K.
T1 - Bulky ligands protect molecular ruby from oxygen quenching
N2 - Chromium(III) complexes can show phosphorescence from the spin-flip excited doublet states 2E/2T1 in the near-infrared with high photoluminescence quantum yields and extremely long lifetimes in the absence of dioxygen. The prototype molecular ruby, [Cr(ddpd)2]3+ (ddpd = N,N’-dimethyl-N,N’-dipyridine-2-ylpyridine-2,6-diamine), has a photoluminescence quantum yield and a luminescence lifetime of 13.7% and 1.1 ms in deaerated acetonitrile, respectively. However, its luminescence is strongly quenched by 3O2 via an efficient Dexter-type energy transfer process. To enable luminescence applications of molecular rubies in solution under aerobic conditions, we explored the potential of sterically demanding ddpd ligands to shield the chromium(III) center from O2 using steady state and time-resolved photoluminescence spectroscopy. The structures of the novel complexes with sterically demanding ligands were investigated by single crystal X-ray diffraction and quantum chemically by density functional theory calculations. The O2 sensitivity of the photoluminescence was derived from absolutely measured photoluminescence quantum yields and excited state lifetimes under inert and aerobic conditions and by Stern–Volmer analyses of these data. Optimal sterically shielded chromium(III) complexes revealed photoluminescence quantum yields of up to 5.1% and excited state lifetimes of 518 μs in air-saturated acetonitrile, underlining the large potential of this ligand design approach to broaden the applicability of highly emissive chromium(III) complexes.
KW - Fluorescence
KW - Synthesis
KW - Production
KW - Optical spectroscopy
KW - Ligand
KW - Photophysics
KW - Cr(III)
KW - Mechanism
KW - NIR
KW - Sensor
KW - Oxygen
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-570807
DO - https://doi.org/10.1039/d2dt02950b
VL - 51
IS - 46
SP - 17664
EP - 17670
PB - The Royal Society of Chemistry
CY - Berlin
AN - OPUS4-57080
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Wander, Lukas
A1 - Lommel, Lukas
A1 - Braun, Ulrike
A1 - Meyer, Klas
A1 - Paul, Andrea
T1 - Development of a Low-Cost Method for Quantifying Microplastics in Soils and Compost Using Near-Infrared Spectroscopy
N2 - Near-infrared (NIR) spectroscopy is a promising candidate for low-cost, nondestructive, and highthroughput mass quantification of microplastics in environmental samples. Widespread application of the technique is currently hampered mainly by the low sensitivity of NIR spectroscopy compared to thermoanalytical approaches commonly used for this type of analysis. This study shows how the application of NIR spectroscopy for mass quantification of microplastics can be extended to smaller analyte levels by combining it with a simple and rapid microplastic enrichment protocol. For this purpose, the widely used flotation of microplastics in a NaCl solution, accelerated by centrifugation, was chosen which allowed to remove up to 99 % of the matrix at recovery rates of 83–104 %. The spectroscopic measurements took place directly on the stainless-steel filters used to collect the extracted particles to reduce sample handling to a minimum. Partial least squares regression (PLSR) models were used to identify and quantify the extracted microplastics in the mass range of 1–10 mg.
The simple and fast extraction procedure was systematically optimized to meet the requirements for the quantification of microplastics from common PE-, PP-, and PS-based packaging materials with a particle size < 1 mm found in compost or soils with high natural organic matter content (> 10 % determined by loss on ignition). Microplastics could be detected in model samples at a mass fraction of 1 mg g-1. The detectable microplastic mass fraction is about an order of magnitude lower compared to previous studies using NIR spectroscopy without additional enrichment. To emphasize the cost-effectiveness of the method, it was implemented using some of the cheapest and most
compact NIR spectrometers available.
KW - Mikroplastik
KW - NIR
KW - Sensor
KW - Kompost
KW - Multivariat
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-552605
DO - https://doi.org/10.1088/1361-6501/ac5e5f
VL - 33
IS - 7
SP - 1
EP - 13
PB - IOP Publishing Ltd.
CY - Bristol
AN - OPUS4-55260
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Fa, X.
A1 - Lin, Sh.
A1 - Yang, J.
A1 - Shen, Ch.
A1 - Liu, Y.
A1 - Gong, Y.
A1 - Qin, A.
A1 - Ou, Jun
A1 - Resch-Genger, Ute
T1 - −808 nm-activated Ca2+ doped up-conversion nanoparticles that release no inducing liver cancer cell (HepG2) apoptosis
N2 - Anear-infrared (NIR) light-triggered release method for nitric oxide (NO) was developed utilizing core/shell NaYF4: Tm/Yb/Ca@NaGdF4:Nd/Yb up-conversion nanoparticles (UCNPs) bearing a mesoporous silica (mSiO2) shell loaded with theNOdonor S-nitroso-N-acetyl-DL-penicillamine (SNAP). To avoid overheating in biological samples, Nd3+ was chosen as a sensitizer, Yb3+ ions as the bridging sensitizer, andTm3+ ions as UV-emissive activator while co-doping with Ca2+ was done to enhance the luminescence of the activatorTm3+.NOrelease from SNAP was triggered by an NIR-UV up-conversion process, initiated by 808nmlight absorbed by the Nd3+ ions.NOrelease was confirmed by the Griess method. Under 808nmirradiation, the viability of the liver cancer cell line HepG2 significantly decreased with increasing UCNPs@mSiO2-SNAP concentration. For a UCNPs@mSiO2-SNAP concentration of 200 μgml−1, the cell survival probability was 47%. These results demonstrate that UCNPs@mSiO2-SNAP can induce the release of apoptosis-inducingNOby NIR irradiation.
KW - Nano
KW - Nanomaterial
KW - Upconversion nanoparticle
KW - Lanthanide
KW - Photoluminescence
KW - Quantum yield
KW - Photophysics
KW - Lifetime
KW - Sensor
KW - Excitation power density
KW - Brightness
KW - NIR
KW - Mechanism
KW - Triggered
KW - Release
KW - Cell
KW - PDT
KW - Dye
KW - Therapy
KW - Surface
KW - Coating
PY - 2022
DO - https://doi.org/10.1088/2050-6120/ac5524
VL - 10
IS - 2
SP - 1
EP - 9
PB - IOP Publishing
AN - OPUS4-54842
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Wander, Lukas
A1 - Lommel, Lukas
A1 - Meyer, Klas
A1 - Braun, Ulrike
A1 - Paul, Andrea
T1 - Development of a low-cost method for quantifying microplastics in soils and compost using near-infrared spectroscopy
N2 - Near-infrared (NIR) spectroscopy is a promising candidate for low-cost, nondestructive, and high-throughput mass quantification of micro¬plastics in environmental samples. Widespread application of the technique is currently hampered mainly by the low sensitivity of NIR spectroscopy compared to thermo-analytical approaches commonly used for this type of analysis. This study shows how the application of NIR spectroscopy for mass quantification of microplastics can be extended to smaller analyte levels by combining it with a simple and rapid microplastic enrichment protocol. For this purpose, the widely used flotation of microplastics in a NaCl solution, accelerated by centrifugation, was chosen which allowed to remove up to 99 % of the matrix at recovery rates of 83–104 %. The spectroscopic measurements took place directly on the stainless-steel filters used to collect the extracted particles to reduce sample handling to a minimum. Partial least squares regression (PLSR) models were used to identify and quantify the extracted microplastics in the mass range of 1–10 mg. The simple and fast extraction procedure was systematically optimized to meet the requirements for the quantification of microplastics from common PE-, PP-, and PS-based packaging materials with a particle size < 1 mm found in compost or soils with high natural organic matter content (> 10 % determined by loss on ignition). Microplastics could be detected in model samples at a mass fraction of 1 mg g-1. The detectable microplastic mass fraction is about an order of magnitude lower compared to previous studies using NIR spectroscopy without additional enrichment. To emphasize the cost-effectiveness of the method, it was implemented using some of the cheapest and most compact NIR spectrometers available.
KW - NIR
KW - Soil
KW - compost
KW - PLSR
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-546405
DO - https://doi.org/10.1088/1361-6501/ac5e5f
SN - 0957-0233
VL - 33
IS - 7
SP - 075801
EP - 075814
PB - IOP Publishing Ltd.
CY - UK
AN - OPUS4-54640
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Bandi, V.G.
A1 - Luciano, M.P.
A1 - Saccomano, M.
A1 - Patel, N.L.
A1 - Bischof, Th. S.
A1 - Lingg, J.G.P.
A1 - Tsrunchev, P.T.
A1 - Nix, M.N.
A1 - Ruehle, Bastian
A1 - Sanders, C.
A1 - Riffle, L.
A1 - Robinson, C.M.
A1 - Difilippantonio, S.
A1 - Kalen, J.D.
A1 - Resch-Genger, Ute
A1 - Ivanic, J.
A1 - Bruns, O.T.
A1 - Schnermann, M.
T1 - Targeted multicolor in vivo imaging over 1,000 nm enabled by nonamethine cyanines
N2 - Recent progress has shown that using wavelengths between 1,000 and 2,000 nm, referred to as the shortwave-infrared or near-infrared (NIR)-II range, can enable high-resolution in vivo imaging at depths not possible with conventional optical wavelengths.
However, few bioconjugatable probes of the type that have proven invaluable for multiplexed imaging in the visible and NIR range are available for imaging these wavelengths. Using rational design, we have generated persulfonated indocyanine dyes with absorbance maxima at 872 and 1,072 nm through catechol-ring and aryl-ring fusion, respectively, onto the nonamethine scaffold. Multiplexed two-color and three-color in vivo imaging using monoclonal antibody and dextran conjugates in several tumor models illustrate the benefits of concurrent labeling of the tumor and healthy surrounding tissue and lymphatics.
These efforts are enabled by complementary advances in a custom-built NIR/shortwave-infrared imaging setup and software package for multicolor real-time imaging.
KW - Photoluminescence
KW - Fluorescence
KW - Dye
KW - Cyanine
KW - Antibody
KW - Bioconjugate
KW - Conjugate
KW - Quantum yield
KW - Photophysics
KW - Lifetime
KW - Sensor
KW - NIR
KW - SWIR
KW - Mechanism
KW - Imaging
KW - Application
KW - Contrast agent
KW - Bioimaging
PY - 2021
DO - https://doi.org/10.1038/s41592-022-01394-6
VL - 19
IS - 3
SP - 353
EP - 358
PB - Nature Research
AN - OPUS4-54465
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Le Guevel, X.
A1 - Wegner, Karl David
A1 - Würth, Christian
A1 - Baulin, V. A.
A1 - Musnier, B.
A1 - Josserand, V.
A1 - Resch-Genger, Ute
A1 - Koll, J-C
T1 - Tailoring the SWIR emission of gold nanoclusters by surface ligand rigidification and their application in 3D bioimaging
N2 - The influence of solvent polarity and surface ligand rigidification on the SWIR emission profile of gold nanoclusters with an anistropic surface was investigated. A strong enhancement of the SWIR emission band at 1200 nm was observed when measuring in different local environments: in solution, in polymer composites, and in solids. SWIR in vivo imaging of mice assisted by deep learning after intravenous administration of these gold nanoclusters provides high definition pseudo-3D views of vascular blood vessels.
KW - Nano
KW - Nanomaterial
KW - Metal cluster
KW - Photoluminescence
KW - Quantum yield
KW - Photophysics
KW - Lifetime
KW - Sensor
KW - NIR
KW - SWIR
KW - Ligand
KW - Gold
KW - Mechanism
KW - Charge transfer
KW - Enhancement strategy
KW - Imaging
KW - Application
KW - Contrast agent
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-543582
DO - https://doi.org/10.1039/D1CC06737K
VL - 58
IS - 18
SP - 2967
EP - 2970
PB - RSC
AN - OPUS4-54358
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Daly, H.C
A1 - Matikonda, S.S
A1 - Steffens, H.C
A1 - Rühle, Bastian
A1 - Resch-Genger, Ute
A1 - Ivanic, J.
A1 - Schermann, M.J
T1 - Daly_Photochem Photobiol 2021_Ketone Incorporation Extends the Emission Properties of the Xanthene Scaffold
N2 - Imaging in the shortwave-infrared region (SWIR, λ = 1000–2500 nm) has the potential to enable deep tissue imaging with high resolution. Critical to the development of these Methods is the identification of low molecular weight, biologically compatible fluorescent probes that emit beyond 1000 nm.
Exchanging the bridging oxygen atom on the xanthene scaffold (C10’ position) with electron withdrawing groups has been shown to lead to significant redshifts in absorbance and emission. Guided by quantum chemistry computational modeling studies, we investigated the installation of a Ketone bridge at the C10’ position. This simple modification extends the absorbance maxima to 860 nm and the emission beyond 1000 nm, albeit with reduced photon output. Overall, These studies demonstrate that broadly applied xanthene dyes can be extended into the SWIR range.
KW - Flourescence
KW - Optical probe
KW - Dye
KW - Photophysics
KW - Quantum yield
KW - Mechanism
KW - NIR
KW - SWIR
KW - Imaging
KW - Reliability
KW - Method
KW - Quality assurance
PY - 2021
DO - https://doi.org/10.1111/php.13544
SN - 1751-1097
VL - 98
IS - 2
SP - 325
EP - 333
PB - Wiley Online Library
AN - OPUS4-54080
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Ahiboz, D.
A1 - Andresen, Elina
A1 - Manley, P.
A1 - Resch-Genger, Ute
A1 - Würth, Christian
A1 - Becker, C.
T1 - Metasurface-Enhanced Photon Upconversion upon 1550 nm Excitation
N2 - Photon upconversion upon 1550 nm excitation is of high relevance for applications in the third biological excitation window, for photovoltaics beyond current limitations, and enables appealing options in the field of glass Fiber telecommunications. Trivalent doped erbium ions (Er3+) are the material of choice for 1550 nm excited upconversion, however, they suffer from a low absorption cross-section and a low brightness. Therefore, the ability of Silicon metasurfaces to provide greatly enhanced electrical near-fields is employed to enable efficient photon upconversion even at low external Illumination conditions. Hexagonally shaped β-NaYF4:Er3+ nanoparticles are placed on large-area silicon metasurfaces designed to convert near-infrared (1550 nm) to visible light. More than 2400-fold enhanced photon upconversion luminescence is achieved by using this metasurface instead of a planar substrate.
With the aid of optical simulations based on the finite-element method, this result is attributed to the coupling of the excitation source with metasurface resonances at appropriate incident angles. Analysis of the excitation power density dependence of upconversion luminescence and red-to-green-emission ratios enables the estimation of nanoscale near-field enhancement on the metasurface. The findings permit the significant reduction of required external excitation intensities for photon upconversion of 1550 nm light, opening perspectives in biophotonics, telecommunication, and photovoltaics.
KW - Nano
KW - Nanomaterial
KW - Upconversion nanoparticle
KW - Lanthanide
KW - Photoluminescence
KW - Quantum yield
KW - Photophysics
KW - Lifetime
KW - Sensor
KW - Excitation power density
KW - Single particle
KW - Brightness
KW - NIR
KW - Mechanism
KW - Single enhancement
KW - SWIR
KW - Method
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-537193
DO - https://doi.org/10.1002/adom.202101285.
SN - 2195-1071
VL - 9
IS - 24
SP - 2101285
PB - Wiley-VCH-GmbH
AN - OPUS4-53719
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Grauel, Bettina
A1 - Würth, Christian
A1 - Homann, C.
A1 - Krukewitt, Lisa
A1 - Andresen, Elina
A1 - Roik, Janina
A1 - Recknagel, Sebastian
A1 - Haase, M.
A1 - Resch-Genger, Ute
T1 - Volume and surface effects on two-photonic and three-photonic processes in dry co-doped upconversion nanocrystals
N2 - Despite considerable advances in synthesizing high-quality core/shell upconversion (UC) nanocrystals (NC; UCNC) and UCNC photophysics, the application of near-infrared (NIR)-excitable lanthanide-doped UCNC in the life and material sciences is still hampered by the relatively low upconversion luminescence (UCL) of UCNC of small size or thin protecting shell. To obtain deeper insights into energy transfer and surface quenching processes involving Yb3+ and Er3+ ions, we examined energy loss processes in differently sized solid core NaYF4 nanocrystals doped with either Yb3+ (YbNC; 20% Yb3+) or Er3+ (ErNC; 2% Er3+) and co-doped with Yb3+ and Er3+ (YbErNC; 20% Yb3+ and 2% Er3+) without a surface protection shell and coated with a thin and a thick NaYF4 shell in comparison to single and co-doped bulk materials. Luminescence studies at 375 nm excitation demonstrate backenergy transfer (BET) from the 4G11/2 state of Er3+ to the 2F5/2 state of Yb3+, through which the red Er3+ 4F9/2 state is efficiently populated. Excitation power density (P)-dependent steady state and time-resolved photoluminescence measurements at different excitation and emission wavelengths enable to separate surface-related and volume-related effects for two-photonic and threephotonic processes involved in UCL and indicate a different influence of surface passivation on the green and red Er3+ emission.
The intensity and lifetime of the latter respond particularly to an increase in volume of the active UCNC core. We provide a threedimensional random walk model to describe these effects that can be used in the future to predict the UCL behavior of UCNC.
KW - Nano
KW - Nanomaterial
KW - Upconversion
KW - Nanoparticle
KW - Lanthanide
KW - Photoluminescence
KW - Quantum yield
KW - Pphotophysics
KW - Lifetime
KW - Sensor
KW - Excitation
KW - Power density
KW - Single particle
KW - Brightness
KW - NIR
KW - Mechanism
KW - Modeling
KW - Simulation
KW - Energy transfer
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-535317
DO - https://doi.org/10.1007/s12274-021-3727-y
SN - 1998-0124
VL - 15
IS - 3
SP - 2362
EP - 2373
PB - Springer
AN - OPUS4-53531
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Resch-Genger, Ute
T1 - Tumore abbilden, Biomarker nachweisen, Messungen standardisieren
N2 - Zu den am häufigsten eingesetzten Analysemethoden in den Lebens- und Materialwissenschaften gehören Lumineszenzmethoden. Sie nutzen die Emission von Licht nach Absorption von Energie, um Signale zu erzeugen, und umfassen spektroskopische und mikroskopische Messungen.
KW - Quality assurance
KW - Sensor
KW - Imaging
KW - Reference material
KW - Nano
KW - Particle
KW - Nanomaterial
KW - Upconversion
KW - Nanoparticle
KW - Lanthanide
KW - Photoluminescence
KW - Quantum yield
KW - Photophysics
KW - Lifetime
KW - Excitation
KW - Power density
KW - Single particle
KW - Brightness
KW - NIR
PY - 2021
SP - 75
EP - 77
PB - GDCH
AN - OPUS4-53526
LA - deu
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Frenzel, Florian
A1 - Würth, Christian
A1 - Dukhno, O.
A1 - Przybilla, F.
A1 - Wiesholler, L. M.
A1 - Muhr, V.
A1 - Horsch, T.
A1 - Mély, Y.
A1 - Resch-Genger, Ute
T1 - Multiband emission from single β-NaYF4(Yb,Er) nanoparticles at high excitation power densities and comparison to ensemble studies
N2 - Ensemble and single particle studies of the excitation power density (P)-dependent upconversion luminescence (UCL) of core and core–shell β-NaYF4:Yb,Er upconversion nanoparticles (UCNPs) doped with 20% Yb3+ and 1% or 3% Er3+ performed over a P regime of 6 orders of magnitude reveal an increasing contribution of the emission from high energy Er3+ levels at P > 1 kW/cm2.
This changes the overall emission color from initially green over yellow to white. While initially the green and with increasing P the red emission dominate in ensemble measurements at P < 1 kW/cm2, the increasing population of higher Er3+ energy levels by multiphotonic processes at higher P in single particle studies results in a multitude of emission bands in the ultraviolet/visible/near infrared (UV/vis/NIR) accompanied by a decreased contribution of the red luminescence. Based upon a thorough analysis of the P-dependence of UCL, the emission bands activated at high P were grouped and assigned to 2–3, 3–4, and 4 photonic processes involving energy transfer (ET), excited-state absorption (ESA), cross-relaxation (CR), back energy transfer (BET), and non-radiative relaxation processes (nRP). This underlines the P-tunability of UCNP brightness and color and highlights the potential of P-dependent measurements for mechanistic studies required to manifest the population pathways of the different Er3+ levels.
KW - Nano
KW - Nanomaterial
KW - Upconversion nanoparticle
KW - Lanthanide
KW - Photoluminescence
KW - Quantum yield
KW - Photophysics
KW - Llifetime
KW - Sensor
KW - Excitation power density
KW - Single particle
KW - Brightness
KW - NIR
KW - Mechanism
KW - Color tuning
PY - 2021
DO - https://doi.org/10.1007/s12274-021-3350-y
SN - 1998-0124
VL - 14
IS - 11
SP - 4107
EP - 4115
PB - Nano Research
AN - OPUS4-52364
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Sun, C.
A1 - Schäferling, Michael
A1 - Resch-Genger, Ute
A1 - Gradzielski, M.
T1 - Solvothermal Synthesis of Lanthanide-doped NaYF4 Upconversion
N2 - Lanthanide-doped NaYF4 upconversion nano- and microcrystals were synthesized via a facile solvothermal approach. Thereby, the influence of volume ratios of ethylene glycol (EG)/H2O, molar ratios of NH4F/RE3+ (RE3+ represents the total amount of Y3+ and rare-earth dopant ions), Gd3+ ion contents, types of activator dopant ions, and different organic co-solvents on the crystal phase, size, and morphology of the resulting particles were studied systematically. A possible formation mechanism for the growth of crystals of different morphology is discussed. Our results show that the transition from the α- to the β-phase mainly depends on the volume ratio of EG/H2O and the molar ratio of NH4F/RE3+, while the morphology and size could be controlled by the type of organic co-solvent and Gd3+ dopant ions. Furthermore, the reaction time has to be long enough to convert α-NaYF4 into β-NaYF4 during the growth process to optimize the upconversion luminescence. The formation of larger β-NaYF4 crystals, which possess a higher upconversion luminescence than smaller particles, proceeds via intermediates of smaller crystals of cubic structure. In summary, our synthetic approach presents a facile route to tailor the size, Crystal phase, morphology, and luminescence features of upconversion
materials.
KW - Nano
KW - Nanomaterial
KW - Upconversion nanoparticle
KW - Photoluminescence
KW - Lanthanide
KW - Quantum yield
KW - Photophysics
KW - Lifetime
KW - Surface chemistry
KW - Single particle
KW - Brightness
KW - NIR
KW - Synthesis
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-520307
DO - https://doi.org/10.1002/cnma.202000564
VL - 7
IS - 2
SP - 174
EP - 183
PB - Wiley
AN - OPUS4-52030
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Paul, Andrea
A1 - Broszies, T.
A1 - Ostermann, Markus
A1 - Vogdt, F.U.
A1 - Maiwald, Michael
T1 - Unterscheidung von Mineralwollen mit Nahinfrarot-Spektroskopie (NIRS)
T1 - Differentiation of mineral wool by near-infrared spectroscopy (NIRS)
N2 - Für die Rückführung von aus Rückbauprojekten anfallender künstlicher Mineralwolle in ihren Herstellungsprozess ist es notwendig, Stein- und Glaswolle zu unterscheiden und voneinander getrennt zu halten. Zu diesem Zweck wurde das Potential von NIR-Spektroskopie (NIRS) für einen werks- oder baustellenseitigen Einsatz getestet. NIRS wird aufgrund kurzer Messzeiten, minimaler Probenvorbereitung und hoher Robustheit der Spektrometer häufig in der Prozessanalytik eingesetzt. Untersucht wurden 70 verschiedene Mineralwollen, wobei sich der Probenumfang sowohl aus werksneuen Proben mit Herstellerangaben als auch unbekannten Proben ohne Spezifikation zusammensetzen, die auf verschiedenen Baustellen in den Jahren 2016–2017 entnommen oder von Deponien zur Verfügung gestellt worden waren. Als Referenzmethode wurde die Röntgenfluoreszenzanalyse verwendet, um den Mineralwolle-Typ über den Elementgehalt nach VDI 3492 zu identifizieren. Mit Hilfe eines multivariaten Datenanalyseverfahrens konnte schließlich eine Methode etabliert werden, die eine zuverlässige Identifikation von unbekannten Mineralwollen anhand deren NIR-Spektren als Stein- bzw. Glaswolle ermöglicht.
N2 - For the recirculation of artificial mineral wool resulting from deconstruction projects to the production process, it is necessary to distinguish between rock wool and glass wool. For this purpose, the potential of NIR spectroscopy (NIRS) was tested for the application directly on construction site or in factory. NIRS is often used in process analytics due to short measurement times, minimal sample preparation and high robustness of the spectrometers. In this study 70 mineral wool samples were examined, including both new samples with manufacturer`s specifications and unknown samples without specifications, which were taken at various German construction sites between 2016 and 2017 or which were provided by landfills. X-ray fluorescence spectroscopy was used as a reference method to identify the mineral wool type via the element content according to VDI 3492. With the help of a multivariate data analysis method finally a method was established, which allows a reliable identification of unknown mineral wool based on its NIR spectra as rock or glass wool.
KW - Recycling
KW - NIR
KW - Baustoffe
KW - Chemometrie
PY - 2020
VL - 95
IS - 12
SP - 463
EP - 472
PB - VDI Fachmedien GmbH & Co. KG
CY - Düsseldorf
AN - OPUS4-51851
LA - deu
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Resch-Genger, Ute
A1 - Wang, Cui
A1 - You, Y.
A1 - Förster, C.
A1 - Schubert, H.
A1 - Heinze, K.
A1 - Seitz, M.
T1 - NIR-NIR-Aufkonvertierung in molekularen Chrom-Ytterbium-Salzen
N2 - Photonen-Aufkonvertierung in hetero-oligonuklearen, Metallkomplex-Architekturen mit organischen Liganden ist ein interessantes, aber bisher selten beobachtetes Phänomen, trotz des großen Potentials sowohl aus Sicht der Grundlagenforschung als auch aus der Anwendungsperspektive. Nun wurde ein neues photonisches Material aus molekularen Chrom(III)- und Ytterbium(III)-Komplexionen entwickelt.
Dieses zeigt im Festkörper bei Raumtemperatur abhängig von der Anregungsleistungsdichte nach Anregung des 2F7/2! 2F5/2-3berganges des Ytterbiums bei ca. 980 nm eine kooperative Sensibilisierung der Chrom(III)-zentrierten 2E/2T1-Phosphoreszenz bei ca. 775 nm. Der Aufkonvertierungsprozess ist unempfindlich gegenüber Luftsauerstoff und kann in Gegenwart von Wassermolekülen im Kristallgitter beobachtet werden.
KW - Crystal
KW - Sensor
KW - NIR
KW - Yb(III) complex
KW - Cr(III)
KW - Upconversion
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-517217
DO - https://doi.org/10.1002/ange.202007200
VL - 132
IS - 42
SP - 18804
EP - 18808
PB - Angewandte Chemie
AN - OPUS4-51721
LA - deu
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Altenburg, Simon
A1 - Straße, Anne
A1 - Gumenyuk, Andrey
A1 - Maierhofer, Christiane
T1 - In-situ monitoring of a laser metal deposition (LMD) process: comparison of MWIR, SWIR and high-speed NIR thermography
N2 - Additive manufacturing offers a range of novel applications. However, the manufacturing process is complex and the production of almost defect-free parts with high reliability and durability is still a challenge. Thermography is a valuable tool for process surveillance, especially in metal additive manufacturing processes. The high process temperatures allow one to use cameras usually operating in the visible spectral range. Here, we compare the results of measurements during the manufacturing process of a commercial laser metal deposition setup using a mid wavelength infrared camera with those from a short wavelength infrared camera and those from a visual spectrum high-speed camera with band pass filter in the near infrared range.
KW - Additive Manufacturing
KW - Process monitoring
KW - Thermography
KW - LMD
KW - Metal
KW - MWIR
KW - SWIR
KW - NIR
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-516318
DO - https://doi.org/10.1080/17686733.2020.1829889
VL - 19
IS - 2
SP - 97
EP - 114
PB - Taylor & Francis Group
CY - London, UK
AN - OPUS4-51631
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Resch-Genger, Ute
A1 - Carl, F.
A1 - Grauel, Bettina
A1 - Pons, Monica
A1 - Würth, Christian
A1 - Haase, M.
T1 - LiYF4:Yb/LiYF4 and LiYF4:Yb,Er/LiYF4 core/shell nanocrystals with luminescence decay times similar to YLF laser crystals and the upconversion quantum yield of the Yb,Er doped nanocrystals
N2 - We developed a procedure to prepare luminescent LiYF4:Yb/LiYF4 and LiYF4:Yb,Er/LiYF4 core/shell nanocrystals with a size of approximately 40 nm revealing luminescence decay times of the dopant ions that approach those of high-quality laser crystals of LiYF4:Yb (Yb:YLF) and LiYF4:Yb,Er (Yb,Er:YLF) with identical doping concentrations. As the luminescence decay times of Yb3+ and Er3+ are known to be very sensitive to the presence of quenchers, the long decay times of the core/shell nanocrystals indicate a very low number of defects in the core particles and at the core/shell interfaces. This improvement in the performance was achieved by introducing two important modifications in the commonly used oleic acid based synthesis. First, the shell was prepared via anewly developed method characterized by a very low nucleation rate for particles of pure LiYF4 shell material. Second, anhydrous acetates were used as precursors and additional drying steps were applied to reduce the incorporation of OH− in the crystal lattice, known to quench the emission of Yb3+ ions. Excitation power density (P)-dependent absolute measurements of the upconversion luminescence quantum yield (Φ,UC) of LiYF4:Yb,Er/LiYF4 core/shell particles reveal a maximum value of 1.25% at P of 180 W·cm−2.
Although lower than the values reported for NaYF4:18%Yb,2%Er core/shell nanocrystals with comparable sizes, these Φ, UC values are the highest reported so far for LiYF4:18%Yb,2%Er/LiYF4 nanocrystals without additional dopants. Further improvements May nevertheless be possible by optimizing the dopant concentrations in the LiYF4 nanocrystals.
KW - Nano
KW - Crystal
KW - Quantum yield
KW - LiYF4
KW - Synthesis
KW - Lifetime
KW - Fluorescence
KW - NIR
KW - Photoluminescence
KW - Lanthanide
KW - Upconversion nanoparticle
KW - Nanomaterial
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-515395
DO - https://doi.org/10.1007/s12274-020-3116-y
SN - 1998-0124
VL - 14
IS - 3
SP - 797
EP - 806
PB - Springer
AN - OPUS4-51539
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Zhao, J.
A1 - Hu, Y.
A1 - wei Lin, S.
A1 - Resch-Genger, Ute
A1 - Zhang, R.
A1 - Wen, J.
A1 - Kong, X.
A1 - Qin, A.
A1 - Ou, J.
T1 - Enhanced luminescence intensity of near-infraredsensitized sensitized upconversion nanoparticles via Ca²+ doping for a nitric oxide release platform
N2 - Light-induced NO release based on exogenous NO donors has attracted substantial attention in clinical applications; the induction light source usually converts near-infrared light to blue or ultraviolet light.
However, the low efficiency of near-infrared light-assisted chemical light energy conversion remains a challenge, especially for NaYF4:Yb3+/Tm3+ photoconverting near-infrared light to ultraviolet (UV) and blue light. In this paper, a luminescence-enhanced strategy is reported by doping Ca2+ into NaYF4:Yb3+/Tm3+ and coating it with NaGdF4 through a two-step solvothermal method. Then, UCNPs modified with methyl-b-cyclodextrin (M-b-CD) are loaded on a ruthenium nitrosyl complex [(3)Ru(NO)(Cl)] as nitric oxide release-molecules (NORMs). X-ray diffraction (XRD) and energy-dispersive X-ray spectroscopy (EDS) data demonstrated that Ca2+ was successfully doped into NaYF4:Yb3+/Tm3+ nanoparticles as the core, and a pure hexagonal phase, NaYF4, was obtained from the doping of Ca2+. TEM revealed that the crystallinity was significantly improved after Ca2+ doping, and the core–shell structure was successfully synthesized, with NaGdF4 directionally grown on the NaYF4:Ca/Yb/Tm core. Fluorescence tests showed that, especially in the ultraviolet and blue light excitation wavelength regions, the UC emission intensity of the Ca-doped NaYF4:Yb3+/Tm3+@NaGdF4 core–shell UCNPs increased by 302.95 times vs. NaYF4:Yb3+/Tm3+ UCNPs. Finally, the release of NO was tested by the Griess method. Under 980 nm irradiation, the cell viability distinctly decreased with increasing UCNPs@M-b-CD-NORMs concentration. This study Shows that NORM release of NO is triggered by enhanced up-converted UV and blue light, which can be used for the development of UV photo-sensitive drugs.
KW - Nano
KW - Nanomaterial
KW - Upconversion nanoparticle
KW - Lanthanide
KW - Photoluminescence
KW - Quantum yield
KW - Photophysics
KW - Lifetime
KW - Sensor
KW - Surface chemistry
KW - Single particle
KW - Brightness
KW - NIR
KW - PDT
PY - 2020
DO - https://doi.org/10.1039/d0tb00088d
VL - 8
IS - 30
SP - 6481
EP - 6489
PB - Journal of Materials Chemistry B
AN - OPUS4-51262
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kalmbach, J.
A1 - Wang, Cui
A1 - You, Yi
A1 - Förster, C.
A1 - Schubert, H.
A1 - Heinze, K.
A1 - Resch-Genger, Ute
A1 - Seitz, M.
T1 - Near-IR to near-IR upconversion luminescence in molecular chromium ytterbium salts
N2 - Upconversion photoluminescence in hetero-oligonuclear metal complex architectures featuring organic ligands is an interesting but still rarely observed phenomenon, despite its great potential from a basic research and application perspective. In this context, a new photonic material consisting of molecular chromium(III) and ytterbium(III) complex Ions was developed that exhibits excitation-power density-dependent cooperative sensitization of the chromium-centered 2E/2T1 phosphorescence at approximately 775 nm after excitation of the ytterbium band 2F7/2!2F5/2 at approximately 980 nm in the solid state at ambient temperature. The upconversion process is insensitive to atmospheric oxygen and can be observed in the presence of water molecules in the crystal lattice.
KW - Upconversion
KW - Lanthanide
KW - Photoluminescence
KW - Quantum yield
KW - Photophysics
KW - Lifetime
KW - Sensor
KW - NIR
KW - Cr(III)
KW - Yb(III) complex
KW - Crystal
KW - Triplet-triplet annihilation
KW - Sensitization
KW - Light harvesting
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-512619
DO - https://doi.org/10.1002/anie.202007200
SN - 1433-7851
SN - 1521-3773
VL - 59
IS - 42
SP - 18804
EP - 18808
PB - Wiley
CY - Weinheim
AN - OPUS4-51261
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Hoffmann, Katrin
A1 - Nirmalananthan-Budau, Nithiya
A1 - Resch-Genger, Ute
T1 - Fluorescence calibration standards made from broadband emitters encapsulated in polymer beads for fluorescence microscopy and flow cytometry
N2 - We present here the design and characterization of a set of spectral calibration beads. These calibration beads are intended for the determination and regular control of the spectral characteristics of fluorescence microscopes and other fluorescence measuring devices for the readout of bead-based assays. This set consists of micrometer-sized polymer beads loaded with dyes from the liquid Calibration Kit Spectral Fluorescence Standards developed and certified by BAM for the wavelength-dependent Determination of the spectral responsivity of fluorescencemeasuring devices like spectrofluorometers. To cover the wavelength Region from 400 to 800 nm, two new near-infrared emissive dyes were included, which were spectroscopically characterized in solution and encapsulated in the beads. The resulting set of beads presents the first step towards a new platform of spectral calibration beads for the determination of the spectral characteristics of fluorescence instruments like fluorescence microscopes, FCM setups, and microtiter plate readers, thereby meeting the increasing demand for reliable and comparable fluorescence data especially in strongly regulated areas, e.g., medical diagnostics. This will eventually provide the basis for standardized calibration procedures for imaging systems as an alternative to microchannel slides containing dye solutions previously reported by us.
KW - Fluorescence standard
KW - Fluorescence
KW - Dye
KW - Microscopy
KW - Bead
KW - Particle
KW - NIR
KW - calibration
KW - Quality assurance
KW - Traceability
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-508117
DO - https://doi.org/10.1007/s00216-020-02664-y
SN - 1618-2642
VL - 412
IS - 24
SP - 6499
EP - 6507
PB - Springer
AN - OPUS4-50811
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Yu, Z.
A1 - Musnier, B.
A1 - Wegner, Karl David
A1 - Henry, M.
A1 - Chovelon, B.
A1 - Desroches-Castan, A.
A1 - Fertin, A.
A1 - Resch-Genger, Ute
A1 - Bailly, S.
A1 - Coll, J.-L.
A1 - Usson, Y,
A1 - Josserand, V.
A1 - Le Gúevel, X.
T1 - High-Resolution Shortwave Infrared Imaging of Vascular Disorders Using Gold Nanoclusters
N2 - We synthesized a generation of water-soluble, atomically precise gold nanoclusters (Au NCs) with anisotropic Surface containing a short dithiol pegylated chain (AuMHA/TDT). The AuMHA/TDT exhibit a high brightness (QY ∼ 6%) in the shortwave infrared (SWIR) spectrum with a detection above 1250 nm.
Furthermore, they show an extended half-life in blood (t1/2ß = 19.54 ± 0.05 h) and a very weak accumulation in organs. We also developed a non-invasive, whole-body vascular imaging system in the SWIR window with high-resolution, benefiting from a series of Monte Carlo image processing. The imaging process enabled to improve contrast by 1 order of magnitude and enhance the spatial Resolution by 59%. After systemic administration of these nanoprobes in mice, we can quantify vessel complexity in depth (>4 mm), allowing to detect very subtle vascular disorders non-invasively in bone morphogenetic protein 9 (Bmp9)-deficient mice. The combination of these anisotropic surface charged Au NCs plus an improved SWIR imaging device allows a precise mapping at high-resolution and an in depth understanding of the organization of the vascular network in live animals.
KW - Nanoparticle
KW - Nanosensor
KW - Fluorescence
KW - Metal cluster
KW - NIR
KW - SWIR
KW - Photophysics
KW - Ligand
KW - Size
KW - Surface chemistry
KW - Quantum yield
KW - Mechanism
KW - Lifetime
KW - Decay kinetics
PY - 2020
DO - https://doi.org/10.1021/acsnano.0c01174
VL - 14
IS - 4
SP - 4973
EP - 4981
PB - ACS Publication
AN - OPUS4-50671
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kraft, Marco
A1 - Würth, Christian
A1 - Muhr, V.
A1 - Hirsch, T.
A1 - Resch-Genger, Ute
T1 - Explaining the influence of dopant concentration and excitation power density on the luminescence and brightness of beta-NaYF_4:Yb~(3+),Er~(3+) nanoparticles: Measurements and simulations
N2 - A systematic study of the luminescence properties of monodisperse β-NaYF4: 20% Yb3+, 2% Er3+ upconversion nanoparticles (UCNPs) with sizes ranging from 12–43 nm is presented utilizing steady-state and time-resolved fluorometry.
Special emphasis was dedicated to the absolute quantification of size- and environment-induced quenching of upconversion luminescence (UCL) by highenergy O–H and C–H vibrations from solvent and ligand molecules at different excitation power densities (P). In this context, the still-debated Population pathways of the 4F9/2 energy level of Er3+ were examined. Our results highlight the potential of particle size and P value for color tuning based on the pronounced near-infrared emission of 12 nm UCNPs, which outweighs the red Er3+ emission under “strongly quenched” conditions and accounts for over 50% of total UCL in water. Because current rate equation models do not include such emissions, the suitability of these models for accurately simulating all (de)population pathways of small UCNPs must be critically assessed. Furthermore, we postulate population pathways for the 4F9/2 energy level of Er3+, which correlate with the size-, environment-, and P-dependent quenching states of the higher Er3+ energy levels.
KW - Nanoparticle
KW - Nanosensor
KW - Fluorescence
KW - Upconversion
KW - Upconversion nanoparticle
KW - NIR
KW - Photophysics
KW - Lanthanide
KW - Size
KW - Surface chemistry
KW - Quantum yield
KW - Mechanism
KW - Lifetime
KW - Decay kinetics
KW - Quenching
KW - Diameter
KW - Cyclohexane
KW - Water
PY - 2018
DO - https://doi.org/10.1007/s12274-018-2159-9
VL - 11/12
SP - 6360
EP - 6374
PB - Springer Nature
AN - OPUS4-50307
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Resch-Genger, Ute
A1 - Brunet, G.
A1 - Marin, R.
A1 - Monk, Melissa-Jane
A1 - Galico, D. A.
A1 - Sigoli, F. A.
A1 - Suturina, E. A.
A1 - Hemmer, E.
A1 - Murugesu, M.
T1 - Exploring the dual functionality of an Ytterbium complex for luminescence thermometry and slow magnetic relaxation†
N2 - We present a comprehensive investigation of the magnetic and optical properties of an ytterbium complex, which combines two desirable and practical features into a single molecular system. Based upon YbIII Ions that promote near-infrared optical activity and a chemical backbone that is ideal for an in-depth understanding of the magnetic behaviour, we have designed a multifunctional opto-magnetic species that operates as a luminescent thermometer and as a single-molecule magnet (SMM). Our magnetic investigations, in conjunction with ab initio calculations, reveal one of the highest energy barriers reported for an YbIII-based complex. Moreover, we correlate this anisotropic barrier with the Emission spectrum of the compound, wherein we provide a complete assignment of the energetic profile of the complex. Such studies lay the foundation for the design of exciting multi-faceted materials that are able to retain information at the single-molecule level and possess built-in thermal self-monitoring capabilities.
KW - Magnetic
KW - Fluorescence
KW - NIR
KW - Temperature
KW - Dual sensing
KW - Sensor
KW - Yb(III) complex
KW - Lanthanide
KW - Quantum yield
KW - Quality assurance
PY - 2019
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-486659
DO - https://doi.org/10.1039/c9sc00343f
VL - 10
IS - 28
SP - 6799
EP - 6808
PB - Royal Society of Chemistry
AN - OPUS4-48665
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Wiesholler, L. M.
A1 - Frenzel, Florian
A1 - Grauel, Bettina
A1 - Würth, Christian
A1 - Resch-Genger, Ute
A1 - Hirsch, T.
ED - Resch-Genger, Ute
ED - Hirsch, Thomas
T1 - Yb,Nd,Er-doped upconversion nanoparticles: 980 nm versus 808 nm excitation
N2 - Yb,Nd,Er-doped upconversion nanoparticles (UCNPs) have attracted considerable interest as luminescent reporters for bioimaging, sensing, energy conversion/shaping, and anticounterfeiting due to their capability to convert multiple near-infrared (NIR) photons into shorter wavelength ultraviolet, visible or NIR luminescence by successive absorption of two or more NIR photons. This enables optical measurements in complex media with very little background and high penetration depths for bioimaging. The use of Nd3+ as substitute for the commonly employed sensitizer Yb3+ or in combination with Yb3+ shifts the excitation wavelength from about 980 nm, where the absorption of water can weaken upconversion luminescence, to about 800 nm, and laser-induced local overheating effects in cells, tissue, and live animal studies can be minimized. To systematically investigate the potential of Nd3+ doping, we assessed the performance of a set of similarly sized Yb3+,Nd3+,Er3+-doped core- and core–shell UCNPs of different particle architecture in water at broadly varied excitation power densities (P) with steady state and time-resolved fluorometry for excitation at 980 nm and 808 nm. As a measure for UCNPs performance, the P-dependent upconversion quantum yield (Φ) and its saturation behavior were used as well as particle brightness (B). Based upon spectroscopic measurements at both excitation wavelengths in water and in a lipid phantom and B-based calculations of signal size at different penetration depths, conditions under which excitation at 808 nm is advantageous are derived and parameters for the further optimization of triple-doped UCNPs are given.
KW - Lanthanide
KW - Upconversion
KW - Nanoparticle
KW - Photoluminescence
KW - Quantum yield
KW - Lifetime
KW - Brightness
KW - Nd excitation
KW - Excitation power density
KW - Modelling
KW - NIR
PY - 2019
DO - https://doi.org/10.1039/C9NR03127H
SN - 2040-3372
SN - 2040-3364
VL - 11
IS - 28
SP - 13440
EP - 13449
PB - Royal Society of Chemistry
CY - London
AN - OPUS4-48608
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Wang, Cui
A1 - Otto, S.
A1 - Dorn, M.
A1 - Heinze, K.
A1 - Resch-Genger, Ute
T1 - Luminescent TOP nanosensors for simultaneously measuring temperature, oxygen, and pH at a single excitation wavelength
N2 - Two nanosensors for simultaneous optical measurements of the bioanalytically and biologically relevant analytes temperature (“T”), oxygen (“O”), and pH (“P”) have been designed. These “TOP” nanosensors are based on 100 nmsized silica-coated polystyrene nanoparticles (PS-NPs) doped with a near-infrared emissive oxygen- and temperature-sensitive chromium(III) complex ([Cr(ddpd)2][BPh4]3, CrBPh4) and an inert reference dye (Nile Red, NR or 5,10,15,20tetrakis(pentafluorophenyl) porphyrin, TFPP) and are covalently labeled with pHsensitive fluorescein isothiocyanate (FITC). These emitters can be excited at the same wavelength and reveal spectrally distinguishable emission bands, allowing for ratiometric intensity-based and time-resolved studies in the visible and near-infrared wavelength region. Studies in PBS buffer solutions and in a model body liquid demonstrate the applicability of these nanosensors for the sensitive luminescence readout of TOP simultaneously at the same spatialposition.
KW - Medical diagnostics
KW - Sensor
KW - Nanoparticle
KW - Fluorescence
KW - Nanosensor
KW - Oxygen
KW - Temperature
KW - pH
KW - Ratiometric
KW - Lifetime
KW - NIR
KW - Cr(III) complex
KW - Dye
KW - FITC
KW - Environment
PY - 2019
DO - https://doi.org/10.1021/acs.analchem.8b05060
SN - 0003-2700
VL - 91
IS - 3
SP - 2337
EP - 2344
PB - ACS
AN - OPUS4-47455
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Tietze, R.
A1 - Panzer, R.
A1 - Starzynski, T.
A1 - Guhrenz, C.
A1 - Frenzel, Florian
A1 - Würth, Christian
A1 - Resch-Genger, Ute
A1 - Weigand, Jan J.
A1 - Eychmüller, A.
T1 - Synthesis of NIR-emitting InAs-based core/shell quantum dots with the use of tripyrazolylarsane as arsenic precursor
N2 - Tris(3,5-dimethylpyrazolyl)arsane (1) is introduced as a low-cost and convenient to handle arsenic precursor for the straight Forward synthesis of InAs Quantum dots (QDs). Transamination of 1 with the solvent oleylamine (OLAH) gives trioleylarsane (As(OLA)3) which in the presence of the reducing agents diisobutylaluminum hydride (DIBAL-H) or trioleylphosphane (P(OLA)3) yields InAs QDs via a typical hot injection approach. The size of the obtained InAs core QDs are tuned by varying the reaction time, the amount of the applied reducing agent, or even more effectively by changing the Indium and/or zinc halide precursors, InX3, and ZnX2 (Cl, Br, or I). Passivation of the resulting InAs particles with a
protective ZnS or ZnSe shell results in improved photoluminescence of the core/shell QDs covering a spectral range between 600 and 1150 nm.
KW - Quantum dot
KW - NIR
KW - Near infrared
PY - 2018
DO - https://doi.org/10.1002/ppsc.201800175
SN - 0934-0866
SN - 1521-4117
VL - 35
IS - 9
SP - 1800175, 1
EP - 7
PB - Wiley
AN - OPUS4-46076
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Resch-Genger, Ute
ED - Wang, Cui
ED - Otto, S.
ED - Dorn, M.
ED - Kreidt, E.
ED - Lebon, J.
ED - Srsan, L.
ED - di Martino-Fumo, P.
ED - Gerhards, M.
ED - Seitz, M.
ED - Heinze, K.
T1 - Deuterated Molecular Ruby with Record Luminescence Quantum Yield
N2 - The recently reported luminescent chromium(III) complex 13+ ([Cr(ddpd)2]3+; ddpd=N,N’-dimethyl-N,N’-dipyridine-2-yl-pyridine-2,6-diamine) shows exceptionally strong near-IR emission at 775 nm in water under ambient conditions (F=11%) with a microsecond lifetime as the ligand design in 13+ effectively eliminates non-radiative decay pathways, such as photosubstitution, back-intersystem crossing, and trigonal twists. In the absence of energy acceptors, such as dioxygen, the remaining decay pathways are energy transfer to high energy solvent and ligand oscillators, namely OH and CH stretching vibrations. Selective deuteration of the solvents and the ddpd ligands probes the efficiency of these oscillators in the excited state deactivation. Addressing these energytransfer pathways in the first and second coordination sphere furnishes a record 30% quantum yield and a 2.3 millisecond lifetime for a metal complex with an earth-abundant metal ion in solution at room temperature.
KW - Fluorescence
KW - Quantum yield
KW - Ligand design
KW - Cr(III)
KW - Complex
KW - Oxygen sensor
KW - NIR
KW - Fluorescence lifetime
PY - 2018
DO - https://doi.org/10.1002/ange.201711350
SN - 1521-3773
VL - 57
IS - 4
SP - 1112
EP - 1116
PB - Wiley-VCH Verlag & Co. KGaA
CY - Weinheim
AN - OPUS4-44045
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Resch-Genger, Ute
ED - Wang, Cui
ED - Otto, S.
ED - Dorn, M.
ED - Kreidt, E.
ED - Lebon, J.
ED - Srsan, L.
ED - di Martino-Fumo, P.
ED - Gerhards, M.
ED - Seitz, M.
ED - Heinze, K.
T1 - Deuterierter molekularer Rubin mit Rekord-Lumineszenzquantenausbeute
N2 - Der kürzlich publizierte Chrom(III)-Komplex 13+([Cr(ddpd)2]3+) zeigt in wässriger Lösung unter Umgebungsbedingungen eine bemerkenswert starke Emission im nahen Infrarot-Bereich mit einer Emissionswellenlänge von 775 nm.
Geschicktes Ligandendesign verhindert strahlungslose Desaktivierungsprozesse wie Photosubstitution, Rück-Intersystem-Crossing und trigonale Verzerrungen und führt damit zu einer Phosphoreszenzlebensdauer im Bereich von Mikrosekunden.
In Abwesenheit von Energieakzeptoren wie molekularem Sauerstoff verbleibt nur Energietransfer zu hochenergetischen Oszillatoren der Liganden und Lösungsmittelmoleküle wie beispielsweise OH- und CH-Streckschwingungen als Desaktivierungspfad. Selektive Deuterierung der ddpd-Liganden und der Lösungsmittel l-sst die Effizienz dieser Oszillatoren bei der Desaktivierung angeregter Zustände erkennbar werden. Gezieltes Ausschalten dieser Relaxationspfade führt zu einer Quantenausbeute von 30% und einer Lebensdauer von 2.3 Millisekunden bei Raumtemperatur in Lösung – Rekordwerte für einen Komplex, der auf dem Element Chrom basiert. Diese fundamentalen Erkenntnisse ebnen den Weg für gezieltes Ligandendesign zur Synthese lumineszierender Komplexe mit gut verfügbaren Übergangsmetallen.
KW - Fluorescence
KW - Quantum yield
KW - Ligand design
KW - Cr(III)
KW - Complex
KW - Oxygen sensor
KW - NIR
KW - Fluorescence lifetime
PY - 2018
DO - https://doi.org/10.1002/ange.201711350
SN - 1521-3757
VL - 130
IS - 4
SP - 1125
EP - 1130
PB - Wiley-VCH Verlag & Co. KGaA
CY - Weinheim
AN - OPUS4-44043
LA - deu
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Huang, K.
A1 - Liu, H.
A1 - Kraft, Marco
A1 - Shikha, S.
A1 - Zheng, X.
A1 - Agren, H.
A1 - Würth, Christian
A1 - Resch-Genger, Ute
A1 - Zhang, Y.
T1 - A protected excitation-energy reservoir for efficient upconversion luminescence
N2 - Lanthanide-doped upconversion nanoparticles (UCNPs) are of great interest for biomedical applications. Currently, the applicability of UCNP bionanotechnology is hampered by the generally low luminescence intensity of UCNPs and inefficient energy Transfer from UCNPs to surface-bound chromophores used e.g. for photodynamic therapy or analyte sensing. In this work, we address the low-Efficiency issue by developing versatile core-Shell nanostructures, where high-concentration sensitizers and activators are confined in the core and Shell Region of representative hexagonal NaYF2:Yb,Er UCNPs. After Doping concentration optimization, the sensitizer-rich core is able to harvest/accumulate more excitation energy and generate almost one order of Magnitude higher luminescence intesity than conventional homogeneously doped nanostructures. At the same time, the activator Ions located in the Shell enable a ~6 times more efficient resonant energy Transfer from UCNPs to surface-bound acceptor dye molecules due to the short distance between donor-acceptor pairs. Our work provides new insights into the rational design of UCNPs and will greatly encrease the General applicability of upconversion nanotechnologies.
KW - Fluorescence
KW - Lanthanide
KW - Upconversion
KW - Brightness
KW - Quantification
KW - Nanoparticle
KW - Absolute fluorometry
KW - NIR
KW - IR
KW - Quantum yield
KW - Integrating sphere spectroscopy
KW - Method
KW - Energy transfer
KW - Shell
KW - Particle architecture
PY - 2017
DO - https://doi.org/10.1039/c7nr06900f
SN - 2040-3372
SN - 2040-3364
VL - 10
IS - 1
SP - 250
EP - 259
PB - The Royal Society of Chemistry
AN - OPUS4-43893
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Resch-Genger, Ute
A1 - Pilch, A.
A1 - Würth, Christian
A1 - Kaiser, Martin
A1 - Wawrzynczyk, D.
A1 - Kurnatowska, M.
A1 - Arabasz, S.
A1 - Prorok, K.
A1 - Samoc, M.
A1 - Strek, W.
A1 - Bednarkiewicz, A.
T1 - Shaping luminescent properties of Yb3+ and Ho3+ co-doped upconverting core-shell ß-NaYF4 nanoparticles by dopant distribution and spacing
N2 - At the core of luminescence color and lifetime Tuning of rare earth doped upconverting nanoparticles (UCNPs), is the understanding of the Impact of the particle architecture for commonly used sensitizer (S) and activator (A) Ions. In this respect, a series of core@Shell NaYF4 UCNPs doped with Yb3+ and Ho3+ ions are presented here, where the same dopant concentrations are distributed in different particle architectures following the scheme: YbHo core and YbHo@..., ...@YbHo, Yb@Ho, Ho@Yb, YbHo@Yb, and Yb@YbHo core-Shell NPs. As refealed by quantitative steady-state and time-resolved luminescence studies, the relative spatial Distribution of the A and S ions in the UCNPs and their protection from surface quenching has a critical Impact on ther luminescence characteristics. Although the increased amount of Yb3+ Ions boosts UCNP Performance by amplifying the Absorption, the Yb3+ ions can also efficiently dissipate the energy stored in the material through energy Migration to the surface, thereby reducing the Overall energy Transfer Efficiency to the activator ions. The results provide yet another proof that UC Phosphor chemistry combined with materials Engineering through intentional core@shell structures may help to fine-tune the luminescence Features of UCNPs for their specific future applications in biosensing, bioimaging, photovoltaics, and Display technologies.
KW - Fluorescence
KW - Upconversion
KW - NIR
KW - Nonlinear
KW - Nanoparticle
KW - Surface chemistry
KW - Quantum yield
KW - Liftetime
KW - Nanocrystal
KW - Lanthanide
KW - Ho(III)
KW - Yb(III)
KW - Mechanism
KW - Absolute flourescence
KW - Excitation power density dependence
PY - 2017
DO - https://doi.org/10.1002/smll.201701635
SN - 1613-6810
VL - 13
IS - 47
SP - 1701635, 1
EP - 13
PB - WILEY-VCH Verlag GmbH & co. KGaA
CY - Weinheim
AN - OPUS4-43629
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Martynenko, Irina
A1 - Litvin, A.P.
A1 - Purcell-Milton, F.
A1 - Baranov, A. V.
A1 - Fedorov, A.V.
A1 - Gun´ko, Y.K.
T1 - Application of semiconductor quantum dots in bioimaging and biosensing
N2 - In this review we present new concepts and recent progress in the application of semiconductur quantum dots (QD) as labels in two important areas of biology, bioimaging and biosensing. We analyze the biologically relevant properties of QDs focusing on the following topics: QD surface treatment and stability labeling of cellular structures and receptors with QDs, incorporation of QDs in living cells, cytotoxicity of QDs and influence of the biolocical environment on the biological and optical properties of QDs. Initially, we consider utilization of QDs as agants in high-resolution bioimaging techniques that can provide information at the molecular levels. The deverse range of modern live-cell QD-based imaging techniques with resolution far beyond the diffraction limit of light is examined. In each technique, we discuss the pros and cons of QD use and deliberate how QDs can be further engineered to facilitate their application in the respective imaging techniques and to produce significant improvements in resolution. Then we review QD-based point-of-care bioassays, bioprobes, and biosensors designed in different formats ranging from analytic biochemistry assays and ELISA, to novel point-of-care smartphone integrated QD-based biotests. Here, a wide range of QD-based fluorescence bioassays with optical transduction, electrochemiluminescence and photoelectrochemical assays are discussedc. Finally, this review provides an analysis of the prospects of application of QDs in selected important Areas of biology.
KW - Fluorescence
KW - Semiconductor quantum dot
KW - Imaging
KW - Quantification
KW - Nanoparticle
KW - NIR
KW - IR
KW - Quantum yield
KW - Method
KW - Microscopy
KW - Assay
KW - Bioconjugate
PY - 2017
DO - https://doi.org/10.1039/c7tb01425b
VL - 5
IS - 33
SP - 6701
EP - 6727
PB - Royal Society of Chemistry
AN - OPUS4-43027
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Pauli, Jutta
A1 - Hoffmann, Katrin
A1 - Würth, Christian
A1 - Behnke, Thomas
A1 - Resch-Genger, Ute
T1 - Standardization of fluorescence measurements in the UV/vis/NIR/IR
N2 - Photoluminescence techniques are amongst the most widely used Tools in the life sciences, with new and exciting applications in medical diagnostics and molecular Imaging continuously emerging. Advantages include their comparative ease of use, unique sensitivity, non-invasive character, and potential for Multiplexing, remote sensing, and miniaturization. General drawbacks are, however, signals, that contain unwanted wavelength- and polarization contributions from Instrument-dependent effects, which are also time-dependent due to aging of Instrument-components, and difficulties to measure absolute flourescence entensities. Moreover, scattering Systems require Special measurement geometries and the interest in new optical Reporters with Emission > 1000 nm strategies for reliable measurements in the second diagnostic for the comparison of material Performance and the rational designg of new flourophores with improved properties.
Here, we present strategies to versatile method-adaptable liquid and solid flourescence Standards for different flourescence paramters including traceable Instrument calibration procedures and the design of integrating spere setups for the absolute measurements of emission spectra and Quantum yields in the wavelength Region of 350 to 1600 nm. Examples are multi-Emitter glasses, spectral flourescence Standards, and quantum yield Standards for the UV/vis/NIR.
T2 - Conference on Molecular-Guided Surgery - Molecules, Devices, and Applications III
CY - San Francisco, CA, USA
DA - 28.01.2017
KW - Fluorescence
KW - Reference material
KW - Standard
KW - Calibration
KW - Nanoparticle
KW - Absolute flourometry
KW - Integrating sphere spectroscopy
KW - NIR
KW - IR
KW - Quantum yield standard
KW - Emission standards
PY - 2017
SN - 978-1-5106-0539-8
DO - https://doi.org/10.1117/12.2255728
SN - 0277-786X
VL - 10049
SP - 1
PB - Proceedings of SPIE
AN - OPUS4-41783
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Resch-Genger, Ute
ED - Mousavi, M.
ED - Thomasson, B.
ED - Li, M.
ED - Kraft, Marco
ED - Würth, Christian
ED - Andersson-Engels, S.
T1 - Beam-profile-compensated quantum yield measurements of upconverting nanoparticles
N2 - The quantum yield is a critically important parameter in the development of lanthanide-based upconverting nanoparticles (UCNPs) for use as novel contrast agents in biological imaging and optical reporters in assays. The present work focuses on the influence of the beam Profile in measuring the quantum yield (f) of nonscattering dispersions of nonlinear upconverting probes, by establishing a relation between f and excitation light power density from a rate equation analysis. A resulting 60% correction in the measured f due to the beam profile utilized for excitation underlines the significance of the beam profile in such measurements, and its impact when comparing results from different Setups and groups across the world.
KW - Fluorescence
KW - Lanthanide
KW - Upconversion
KW - Brithtness
KW - Quantification
KW - Nanoparticle
KW - Absolute fluoreometry
KW - NIR
KW - IR
KW - Quantum yield
KW - Integrating sphere spectroscopy
KW - Method
PY - 2017
DO - https://doi.org/10.1039/c7cp03785f
SN - 1463-9076
SN - 1463-9084
VL - 19
IS - 33
SP - 22016
EP - 22022
PB - Royal Society of Chemistry
AN - OPUS4-42583
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Gorris, H.H.
A1 - Resch-Genger, Ute
T1 - Perspectives and challenges of photon-upconversion nanoparticles - Part II: Bioanalytical applications
N2 - In Part II of this Review series on lanthanide-doped photon-upconversion nanoparticles (UCNPs), we present and critically discuss the Performance and suitability of UCNPs as background-free luminescent Reporters in bioimaging and bioanalytical applications. The preparation of a biocompatible nanoparticle surface is an integral step for all life - science-related applications. UCNPs have found their way into a large number of diagnostic platforms, homogeneous and heterogeneous assay formats, and sensor applications. Many bioanalytical detection schemes involve Förster resonance energy transfert (FRET), which is still debated for UCNPs and Needs to be much improved. The Need for dedicated and standardized instruments as well as recent studies on the Dissolution and potential toxicity of UCNPs are addressed. Finally we outline future Trends and challenges in the field of upconversion.
KW - Fluorescence
KW - Lanthanide
KW - Upconversion
KW - Brightness
KW - Quantification
KW - Nanoparticle
KW - Absolute fluorometry
KW - NIR
KW - IR
KW - Quantum yield
KW - Assay
KW - Bioconjugation
KW - Imaging
KW - FRET
KW - Sensor
PY - 2017
DO - https://doi.org/10.1007/s00216-017-0482-8
SN - 1618-2650
SN - 1618-2642
VL - 409
IS - 25
SP - 5875
EP - 5890
PB - Springer
AN - OPUS4-41706
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Resch-Genger, Ute
A1 - Gorris, H.H.
T1 - Perspectives and challenges of photon-upconversion nanoparticles - Part I: routes to brighter particles and quantitative spectroscopic studies
N2 - Lanthanide-doped photon-upconversion nanoparticles (UCNPs) have been the Focus of many Research activities in materials and life sciences in the last 15 years because of their potential to convert light between different spectral regions and their unique photophysical properties. To fully exploit the application potential of These facinating nanomaterials, a number of challenges have to be overcome, such as the low brightness, particularly of small UCNPs, and the reliable quantification of the excitation-power-density-dependent upconversion luminescence. In this series of critical Reviews, recent developments in the design, Synthesis, optical-spectroscopic characterization, and application of UCNPs are presented with Special Focus on bioanalysis and the life sciences. Here we guide the reader from the Synthesis of UCNPs to different concepts to enhance their luminescence, including the required optical-spectroscopic assessment to quantify material Performance; surface modification strategies and bioanalytical applications as well as selected examples of the use of UCNPs as reporters in different Assay formats are addressed in part II. Future Trends and challenges in the field of upconversion are discussed with Special emphasis on UCNP Synthesis and material characterization, particularly quantitative luminescence studies.
KW - Fluorescence
KW - Lanthanide
KW - Upconversion
KW - Brightness
KW - Quantification
KW - Nanoparticle
KW - Absolute fluorometry
KW - NIR
KW - IR
KW - Quantum yield
PY - 2017
DO - https://doi.org/10.1007/s00216-017-0499-z
SN - 1618-2650
SN - 1618-2642
VL - 409
IS - 25
SP - 5855
EP - 5874
PB - Springer
AN - OPUS4-41665
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Paul, Andrea
A1 - Bräuer, Bastian
A1 - Nieuwenkamp, G.
A1 - Ent, H.
A1 - Bremser, Wolfram
T1 - A validated near-infrared spectroscopic method for methanol detection in biodiesel
N2 - Abstract. Biodiesel quality control is a relevant issue as biodiesel properties influence diesel engine performance and integrity. Within the European Metrology Research Program (EMRP) ENG09 project “Metrology for Biofuels”, an on-line /at-site suitable near-infrared spectroscopy (NIRS) method has been developed in parallel with an improved EN14110 headspace GC analysis method for methanol in biodiesel. Both methods have been optimized for a methanol content of 0.2 mass% as this represents the maximum limit of methanol content in FAME according to EN 14214:2009. The NIRS method is based on a mobile NIR spectrometer equipped with a fiber-optic coupled probe. Due to the high volatility of methanol, a tailored air-tight adaptor was constructed to prevent methanol evaporation during measurement. The methanol content of biodiesel was determined from evaluation of NIRS spectra by Partial Least Squares Regression (PLS). Both GC analysis and NIRS exhibited a significant dependence on biodiesel feedstock. The NIRS method is applicable to a content range of 0.1 % (m/m) to 0.4 % (m/m) of methanol with uncertainties at around 6% relative for the different feedstocks. A direct comparison of headspace GC and NIRS for samples of FAMEs yielded that the results of both methods are fully compatible within their stated uncertainties.
KW - FAME
KW - Headspace GC
KW - NIR
KW - PLSR
KW - EMRP
PY - 2016
DO - https://doi.org/10.1088/0957-0233/27/6/065002
SN - 0957-0233
SN - 1361-6501
VL - 27
IS - 6
SP - 065002, 1
EP - 9
PB - IOP Publishing Ltd
CY - UK
AN - OPUS4-37471
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Hoffmann, Katrin
A1 - Behnke, Thomas
A1 - Drescher, Daniela
A1 - Kneipp, Janina
A1 - Resch-Genger, Ute
T1 - Near-infrared-emitting nanoparticles for lifetime-based multiplexed analysis and imaging of living cells
N2 - The increase in information content from bioassays and bioimaging requires robust and efficient strategies for the detection of multiple analytes or targets in a single measurement, thereby addressing current health and security concerns. For fluorescence techniques, an attractive alternative to commonly performed spectral or color multiplexing presents lifetime multiplexing and the discrimination between different fluorophores based on their fluorescence decay kinetics. This strategy relies on fluorescent labels with sufficiently different lifetimes that are excitable at the same wavelength and detectable within the same spectral window. Here, we report on lifetime multiplexing and discrimination with a set of nanometer-sized particles loaded with near-infrared emissive organic fluorophores chosen to display very similar absorption and emission spectra, yet different fluorescence decay kinetics in suspension. Furthermore, as a first proof-of-concept, we describe bioimaging studies with 3T3 fibroblasts and J774 macrophages, incubated with mixtures of these reporters employing fluorescence lifetime imaging microscopy. These proof-of-concept measurements underline the potential of fluorescent nanoparticle reporters in fluorescence lifetime multiplexing, barcoding, and imaging for cellular studies, cell-based assays, and molecular imaging.
KW - Fluorescence lifetime imaging microscopy
KW - FLIM
KW - Lifetime multiplexing
KW - Near infrared
KW - NIR
KW - Cell imaging
KW - Nanoparticles
PY - 2013
DO - https://doi.org/10.1021/nn4029458
SN - 1936-0851
VL - 7
IS - 8
SP - 6674
EP - 6684
PB - ACS Publ.
CY - Washington, DC, USA
AN - OPUS4-29031
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Licha, K.
A1 - Resch-Genger, Ute
T1 - Probes for optical imaging: new developments
N2 - Recent developments of fluorescent probes beyond approved indocyanine green (ICG) – itself increasingly spreading into new imaging applications like lymphatic mapping, arthritis imaging and tumor surgery – exploit various photophysical and biochemical mechanisms to monitor molecular events with higher specificity and accuracy. Emphasizing nanoparticulate formulations, targeted conjugates, activatable probes, probes with a sensor function and multimodality probes, this review discusses advantages and limitations of each type of probe, thereby critically assessing the desired translation into the clinic.
KW - Fluorescence
KW - Dye
KW - Probe
KW - Optical imaging
KW - Method comparison
KW - Particle
KW - NIR
KW - Probe design
PY - 2011
DO - https://doi.org/10.1016/j.ddtec.2011.11.003
SN - 1740-6749
VL - 8
IS - 2-4
SP - e87
EP - e94
PB - Elsevier
CY - Amsterdam
AN - OPUS4-25936
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Würth, Christian
A1 - Pauli, Jutta
A1 - Lochmann, Cornelia
A1 - Spieles, Monika
A1 - Resch-Genger, Ute
T1 - Integrating sphere setup for the traceable measurement of absolute photoluminescence quantum yields in the near infrared
N2 - There is an increasing interest in chromophores absorbing and emitting in the near-infrared (NIR) spectral region, e.g., for applications as fluorescent reporters for optical imaging techniques and hence, in reliable methods for the characterization of their signal-relevant properties like the fluorescence quantum yield (Φf) and brightness. The lack of well established Φf standards for the NIR region in conjunction with the need for accurate Φf measurements in transparent and scattering media encouraged us to built up an integrating sphere setup for spectrally resolved measurements of absolute fluorescence traceable to radiometric scales. Here, we present the design of this setup and its characterization and validation including an uncertainty budget for the determination of absolute Φf in the visible and NIR. To provide the basis for better measurements of Φf in the spectral window from ca. 600 to 1000 nm used, e.g., for optical imaging, the absolute Φf of a set of NIR chromophores covering this spectral region are measured and compared to relative values obtained using rhodamine 101 as Φf standard. Additionally, the absolute Φf values of some red dyes that are among the most commonly used labels in the life sciences are presented as well as the absolute quantum yield of an optical probe for tumor imaging.
KW - Fluorescence
KW - Photoluminescence
KW - Quantum yield
KW - Dye
KW - Uncertainty
KW - Absolute quantum yield
KW - Method comparison
KW - Integrating sphere
KW - NIR
KW - Standards
KW - Quantum yield standards
PY - 2012
DO - https://doi.org/10.1021/ac2021954
SN - 0003-2700
SN - 1520-6882
VL - 84
IS - 3
SP - 1345
EP - 1352
PB - American Chemical Society
CY - Washington, DC
AN - OPUS4-25504
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Napp, J.
A1 - Behnke, Thomas
A1 - Fischer, L.
A1 - Würth, Christian
A1 - Wottawa, M.
A1 - Katschinski, D.M.
A1 - Alves, F.
A1 - Resch-Genger, Ute
A1 - Schäferling, M.
T1 - Targeted luminescent near-infrared polymer-nanoprobes for in vivo imaging of tumor hypoxia
N2 - Polystyrene nanoparticles (PS-NPs) were doped with an oxygen-sensitive near-infrared (NIR)-emissive palladium meso-tetraphenylporphyrin and an inert reference dye which are both excitable at 635 nm. The nanosensors were characterized with special emphasis on fundamental parameters such as absolute photoluminescence quantum yield and fluorescence lifetime. The PS-NPs were employed for ratiometric dual-wavelength and lifetime-based photoluminescent oxygen sensing. They were efficiently taken up by cultured murine alveolar macrophages, yielding a characteristic and reversible change in ratiometric response with decreasing oxygen concentration. This correlated with the cellular hypoxic status verified by analysis of hypoxia inducible factor-1α (HIF-1α) accumulation. In addition, the surface of PS-NPs was functionalized with polyethylene glycol (PEG) and the monoclonal antibody herceptin, and their binding to HER2/neu-overexpressing tumor cells was confirmed in vitro. First experiments with tumor-bearing mouse revealed a distinctive ratiometric response within the tumor upon hypoxic condition induced by animal sacrifice. These results demonstrate the potential of these referenced NIR nanosensors for in vitro and in vivo imaging that present a new generation of optical probes for oncology.
KW - Fluorescence
KW - NIR
KW - Nanoparticles
KW - Microparticles
KW - Imaging
KW - Cancer
KW - Oxygene
PY - 2011
DO - https://doi.org/10.1021/ac201870b
SN - 0003-2700
SN - 1520-6882
VL - 83
IS - 23
SP - 9039
EP - 9046
PB - American Chemical Society
CY - Washington, DC
AN - OPUS4-24987
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Hoffmann, Katrin
A1 - Behnke, Thomas
A1 - Drescher, Daniela
A1 - Kneipp, Janina
A1 - Resch-Genger, Ute
T1 - Lifetime-based discrimination between spectrally matching vis and NIR emitting particle labels and probes
N2 - Increasing the information content from bioassays which requires robust and efficient strategies for the detection of multiple analytes or targets in a single measurement is an important field of research, especially in the context of meeting current security and health concerns. An attractive alternative to spectral multiplexing, which relies on fluorescent labels excitable at the same wavelength, yet sufficiently differing in their emission spectra or color presents lifetime multiplexing. For this purpose, we recently introduced a new strategy based on 'pattern-matching' in the lifetime domain, which was exemplary exploited for the discrimination between organic dyes and quantum dot labels revealing multi-exponential decay kinetics and allowed quantification of these labels. Meanwhile, we have succeeded in extending this lifetime multiplexing approach to nanometer-sized particle labels and probes absorbing and emitting in the visible (vis) and near-infrared (NIR) spectral region. Here, we present a first proof-of-principle of this approach for a pair of NIR-fluorescent particles. Each particle is loaded with a single organic dye chosen to display very similar absorption and emission spectra, yet different fluorescence decay kinetics. Examples for the lifetime-based distinction between pairs of these fluorescent nanoparticles in solution and in cells are presented. The results underline the potential of fluorescenc lifetime multiplexing in life science and bioanalysis.
KW - Fluorescence
KW - Fluorescence lifetime imaging microscopy
KW - FLIM
KW - Lifetime Multiplexing
KW - Particle Label
KW - Near-infrared
KW - NIR
KW - Cell imaging
KW - Nanoparticles
PY - 2011
DO - https://doi.org/10.1117/12.881442
SN - 1605-7422
VL - 7905
SP - 79051F-1
EP - 79051F-9
PB - SPIE, The International Society for Optical Engineering
CY - Bellingham, Wash.
AN - OPUS4-23637
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Weritz, Friederike
A1 - Schaurich, Dieter
A1 - Wilsch, Gerd
T1 - Detector comparison for sulfur and chlorine detection with laser induced breakdown spectroscopy in the near-infrared-region
N2 - Laser-induced breakdown spectroscopy has been employed for the investigation of the sulfur and chlorine content of building materials. Both, chloride and sulfate ions are major damaging species affecting the stability and lifetime of a structure. Chlorine and sulfur are mostly detected in the VUV and the NIR. In case of building materials the main elements like calcium or iron have many strong spectral lines over the whole spectral range, so that trace elements can only be detected in spectral windows unaffected from these lines. With regard to a preferably simply, robust against dust and vibrations and portable setup only the NIR spectral features are used for civil engineering applications.
Most detectors, mainly CCD cameras have rapidly decreasing quantum efficiency in the NIR. Also the quantum efficiency of the photocathode of CCD-Detectors with image intensifier is decreasing in the NIR. Different CCD-detectors were tested with respect to high quantum efficiency and high dynamic range, which is necessary for simultaneous detection of weak spectral lines from trace elements and intense spectral lines from main elements.
The measurements are made on reference samples consisting of cement, hydrated cement, cement mortar and concrete with well-defined amounts of the trace elements. Experimental conditions are chosen for an optimum intensity of the trace element spectral lines. The detector systems are compared by limit of detections and the signal to noise ratio.
KW - LIBS
KW - Sulfur
KW - Chlorine
KW - NIR
KW - Building materials
KW - Concrete
KW - Detector comparison
PY - 2007
DO - https://doi.org/10.1016/j.sab.2007.10.017
SN - 0584-8547
SN - 0038-6987
VL - 62
IS - 12
SP - 1504
EP - 1511
PB - Elsevier
CY - Amsterdam
AN - OPUS4-16507
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -