TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - External fire (bonfire) tests on steel drums filled with di-tert-butylperoxide T2 - IGUS Energetic and Oxidising Substances (EOS) Working Group Meeting CY - Washington, D.C., USA DA - 2006-04-05 PY - 2006 AN - OPUS4-12466 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Brandversuche mit Dibenzoylperoxid (BPO) T2 - Arbeitskreis "Organische Peroxide" der BG Chemie CY - Pullach im Isartal, Germany DA - 2006-04-25 PY - 2006 AN - OPUS4-12467 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Identifizierung gefährlich exotherm zersetzlicher Stoffe T2 - DECHEMA-Weiterbildungskursus: "Sicherheit von chemischen Reaktionen" CY - Berlin, Germany DA - 2005-10-12 PY - 2005 AN - OPUS4-11464 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Untersuchungen von DTBP-Feuern T2 - VDI Hallescher Bezirksverein, Arbeitskreis Verfahrenstechnik Mitteldeutschland, Fachkolloquium der AG Sicherheitstechnik CY - Köthen, Germany DA - 2007-05-15 PY - 2007 AN - OPUS4-14774 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - On the explosive properties of 1H-benzotriazole and 1H-1,2,3-triazole T2 - IGUS Energetic and Oxidising Substances (EOS) Working Group Meeting CY - Rijswijk, Netherlands DA - 2007-05-09 PY - 2007 AN - OPUS4-16021 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Vent sizing tests with di-(3,5,5-trimethylhexanoyl) peroxide, tert-butyl peroxy-2-ethylhexanoate and tert-butyl peroxybenzoate T2 - IGUS EOS Ad-Hoc Working Group Meeting "Emergency relief venting of organic peroxides and reactive substances" CY - Buxton, England DA - 2007-10-26 PY - 2007 AN - OPUS4-16022 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - IGUS: An example of good international laboratory co-operation T2 - Sitzung des DECHEMA Arbeitsausschusses "Reaktionstechnik sicherheitstechnisch schwieriger Prozesse" CY - Leuna, Germany DA - 2011-09-14 PY - 2011 AN - OPUS4-24328 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Peroxyacetic acids - Properties and Classification T2 - IGUS EOS Meeting CY - Berlin, Germany DA - 2012-05-07 PY - 2012 AN - OPUS4-25851 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Desensitized Explosives (Nitrocellulose Formulations) T2 - IGUS Joint EOS/EPP Meeting CY - Berlin, Germany DA - 2012-05-09 PY - 2012 AN - OPUS4-25852 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - EOS Working Group Chairman's Progress Report of the Last Triennium T2 - IGUS Plenary Meeting CY - Berlin, Germany DA - 2012-05-09 PY - 2012 AN - OPUS4-25853 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Gefährlich exotherm zersetzliche Stoffe und deren Identifizierung T2 - DECHEMA-Weiterbildungskurs "Sicherheit chemischer Reaktionen" CY - Berlin, Germany DA - 2012-03-26 PY - 2012 AN - OPUS4-25694 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Havarie Containerschiff MSC "Flaminia" T2 - Sitzung ProcessNet- Arbeitsausschuss "Reaktionstechnik sicherheitstechnisch schwieriger Prozesse" CY - Frankfurt am Main, Germany DA - 2012-09-05 PY - 2012 AN - OPUS4-26481 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - IGUS: An Example of Good International Laboratory Co-Operation, Part 2 T2 - Sitzung ProcessNet-Arbeitsausschuss "Reaktionstechnik sicherheitstechnisch schwieriger Prozesse" CY - Frankfurt am Main, Germany DA - 2012-09-05 PY - 2012 AN - OPUS4-26482 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Gefährlich exotherm zersetzlicher Stoffe und deren Identifizierung T2 - DECHEMA-Weiterbildungskurs "Sicherheit chemischer Reaktionen" CY - Berlin, Germany DA - 2013-03-18 PY - 2013 AN - OPUS4-27875 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Peroxyacetic acids-Properties and Classification T2 - Peracetic Acid Registration Group (PAR) Meeting CY - Berlin, Germany DA - 2013-04-23 PY - 2013 AN - OPUS4-28541 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Odyssey after loss-MSC "Flaminia" T2 - IGUS EOS Meeting CY - Verneuil en Halatte, France DA - 2013-04-17 PY - 2013 AN - OPUS4-28546 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Implementation of general n.o.s. entries into Class 3 and Division 4.1 (related substances and desensitized explosives) T2 - OECD-IGUS Energetic and Oxidising Substances (EOS) Working Group Meeting CY - Washington, D.C., USA DA - 2001-03-12 PY - 2001 AN - OPUS4-1515 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Burning tests on liquid and solid organic peroxides - a summary T2 - Meeting Organic Peroxide Producers Safety Division, The Society of the Plastics Industry Inc. CY - Washington, D.C., USA DA - 2001-03-15 PY - 2001 AN - OPUS4-1516 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Investigation of the explosion hazards of mixtures containing hydrogen peroxide and alcohols T2 - OECD-IGUS Energetic and Oxidising Substances (EOS) Working Group Meeting CY - Washington, D.C., USA DA - 2001-03-12 PY - 2001 AN - OPUS4-1517 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Development of small scale burning tests for liquid and solid organic peroxides - a summary of the developments during the last years T2 - OECD-IGUS Energetic and Oxidising Substances (EOS) Ad-hoc Groups Meeting CY - Tokyo, Japan DA - 2000-11-13 PY - 2000 AN - OPUS4-1521 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter A1 - Berger, Anka T1 - Explosive Properties and Thermal Hazards of Azodicarboxylates T2 - IGUS Energetic and Oxidising Substances (EOS) Working Group Meeting CY - Tokyo, Japan DA - 2010-05-26 PY - 2010 AN - OPUS4-21360 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter A1 - Blankenhagel, Paul T1 - Organic peroxide fireballs - Project summary (2016 - 2018) N2 - Final report of research activities at BAM concerning large scale fireballs of organic peroxides (OP). New models for OP fireball diameter, duration, height and Surface Emmissive Power (SEP) are proposed and discussed based on a large number of large-scale and small-scale experiments using Di-tert-butylperoxide (DTBP) as a liquid OP and heptane as a liquid hydrocarbon fuel. Finally, CFD simulations are used to predict the fireball parameters: diameter, duration, height and SEP. Also the impact on the German storage regulations for organic peroxides are discussed. T2 - IGUS EOS Meeting 2019 CY - Brussels, Belgium DA - 21.04.2019 KW - Fireball KW - Organic Peroxide KW - DTBP KW - Thermal Radiation KW - CFD KW - Safety distances PY - 2019 AN - OPUS4-48522 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter A1 - Michael-Schulz, Heike T1 - Classification of 5-Aminotetrazole and its hydrate T2 - IGUS Energetic and Oxidizierung Substances (EOS) Working Group Meeting CY - Washington, D.C., USA DA - 2011-04-27 PY - 2011 AN - OPUS4-23571 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter A1 - Mishra, Kirti Bhushan T1 - Safety considerations for organic peroxide fires T2 - IGUS Energetic and Oxidizierung Substances (EOS) Working Group Meeting CY - Washington, D.C., USA DA - 2011-04-27 PY - 2011 AN - OPUS4-23572 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter A1 - Wilrich, Cordula T1 - UN GHS ‒ Physical hazard classifications of chemicals: A critical review of combinations of hazard classes N2 - One of the fundamental principles of the UN-GHS (Globally Harmonized System of Classification and Labelling of Chemicals) is that all hazards of a chemical should be assigned and communicated. There is no general prioritization of hazards in the sense that certain hazard classes are not applicable if another one has been assigned. In contrast to health and environmental hazards, there are physical or chemical factors which preclude certain combinations of physical hazard classes. So far, there is no common understanding as to which combinations are relevant and which not. For example, should a pyrophoric liquid be classified as flammable liquid in addition, or is this redundant and unnecessary? In the course of the implementation of the GHS by countries or sectors and the actual application by industry all over the world, such questions become more and more important. For many of the combinations an unambiguous decision based on theGHS alone is not possible, thus confirming that the question which physical hazard classes might be assigned simultaneously to a chemical is not trivial. As one more milestone on the path to a globally harmonized system for the classification of hazardous chemicals, this should be discussed and ultimately solved on a global basis. It is the hope that this presentaion might serve as an impetus for such discussions. T2 - IGUS EOS Meeting CY - Shanghai, China DA - 09.04.2018 KW - Chemicals classification KW - Globally harmonized system of classification and labelling of chemicals KW - Hazardous chemicals KW - Physical hazards KW - UN-GHS PY - 2018 AN - OPUS4-45002 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weichert, D. T1 - Robustness in Fatigue Strength Estimation N2 - Fatigue strength estimation is a costly manual material characterization process in which state-of-the-art approaches follow a standardized experiment and analysis procedure. In this paper, we examine a modular, Machine Learning-based approach for fatigue strength estimation that is likely to reduce the number of experiments and, thus, the overall experimental costs. Despite its high potential, deployment of a new approach in a real-life lab requires more than the theoretical definition and simulation. Therefore, we study the robustness of the approach against misspecification of the prior and discretization of the specified loads. We identify its applicability and its advantageous behavior over the state-of-the-art methods, potentially reducing the number of costly experiment. T2 - 2nd Annual AAAI Workshop on AI to Accelerate Science and Engineering CY - Washington DC, USA DA - 07.02.2023 KW - Active Learning KW - Gaussian Process KW - Fatigue Strength PY - 2022 AN - OPUS4-56684 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidemann, Gerd T1 - High Resolution Computed Tomography in Materials Analysis T2 - Institutstreffen des Max-Planck-Institut für Kolloid- und Grenzflächenforschung CY - Potsdam, Germany DA - 2002-05-31 PY - 2002 AN - OPUS4-3009 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidemann, Jens T1 - Influence of structural stiffness on the residual stresses during welding of low transformation temperature alloys T2 - 11th International Seminar 'Numerical Analysis of Weldability' CY - Graz/Seggau, Austria DA - 2015-09-27 PY - 2015 AN - OPUS4-34419 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidemann, Jens T1 - Entwicklung eines FE-Modells zur Beurteilung der konstruktiven Schrumpfbehinderung auf die Eigenspannungsausbildung hochfester Schweißverbindungen T2 - MDDK-Master-, Diplomanden- und Doktorandenkolloquium CY - Magdeburg, Germany DA - 2013-01-24 PY - 2013 AN - OPUS4-27985 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidner, Steffen T1 - MALDI - Untersuchung zur Oberflächenmodifizierung von Polymeren nach Plasmabehandlung T2 - 4. MALDI-Anwendertreffen (Shimadzu) CY - Duisburg, Germany DA - 1997-11-26 PY - 1997 AN - OPUS4-11280 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidner, Steffen T1 - MassChrom2D zur Bestimmung der Zusammensetzung von Copolymeren aus MALDI und LC Daten T2 - 16. Kolloquium MALDI und Synthetische Polymere CY - Berlin, Germany DA - 2012-05-08 PY - 2012 AN - OPUS4-26135 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidner, Steffen T1 - Polymer characterization using sophisticated liquid chromatographic techniques combined with MALDI- and ESI-TOF mass spectrometry T2 - 55th ASMS conference on Mass Spectrometry CY - Indianapolis, IN, USA DA - 2007-06-03 PY - 2007 AN - OPUS4-14745 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidner, Steffen T1 - MALDI-MS zur Aufklärung des Mechanismus der homogen katalysierten Polymerisation flüssigkristalliner Seitengruppenmethacrylate T2 - III. BAM-Kolloquium zu "Anwendung von MALDI-MS zur Charakterisierung von synthetischen Polymeren" CY - Berlin, Germany DA - 1999-05-17 PY - 1999 AN - OPUS4-11301 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidner, Steffen T1 - UV- und IR-MALDI-TOF-MS zur Bestimmung von Molmasse und chemischer Heterogenität von synthetischen Polymeren T2 - 4. Deutsches Bruker Daltonik MALDI-TOF-MS Anwendertreffen CY - Fulda, Germany DA - 1999-04-15 PY - 1999 AN - OPUS4-11282 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidner, Steffen T1 - MALDI-MS zur Charakterisierung der Oligomeren nach hydrolytischem und plasmachemischem Abbau von Polymeren T2 - I. BAM-Kolloquium zu "Anwendung von MALDI-MS zur Charakterisierung von synthetischen Polymeren" CY - Berlin, Germany DA - 1997-06-02 PY - 1997 AN - OPUS4-11276 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidner, Steffen T1 - MALDI-TOF-MS of low-molar mass polyethylene and waxes T2 - 49th Conference of the American Society of Mass Spectrometry CY - Chicago, IL, USA DA - 2001-05-25 PY - 2001 AN - OPUS4-11302 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidner, Steffen T1 - Erste Untersuchungen zur Infrarot-MALDI-MS von Polymeren T2 - II. BAM-Kolloquium zu "Anwendung von MALDI-MS zur Charakterisierung von synthetischen Polymeren" CY - Berlin, Germany DA - 1998-05-04 PY - 1998 AN - OPUS4-11281 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidner, Steffen T1 - MALDI-TOF-MS zur Analytik von synthetischen Polymeren T2 - Seminar zur Makromolekularen Chemie im SS 1999, TU Berlin, AK Prof. Springer CY - Berlin, Germany DA - 1999-11-13 PY - 1999 AN - OPUS4-11300 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidner, Steffen T1 - Determination of molecular mass and molecular mass distribution of polymers by matrixassisted laser desorption/ionization - time of fightmass spectrometry (MALDI TOF MS) T2 - ISO TC 61/SC 5 Meeting CY - Yokohama, Japan DA - 2006-09-18 PY - 2006 AN - OPUS4-13822 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidner, Steffen T1 - MALDI-TOF mass spectrometry for the analysis of synthetic polymers T2 - eingelad. Vortrag im National Institute for Advanced Industrial Science and Technology (AIST) CY - Tsukuba, Japan DA - 2006-09-14 PY - 2006 AN - OPUS4-13827 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidner, Steffen T1 - MALDI-ToF mass spectrometry for the characterization of biobased polymers suitable for depollution N2 - In this work, bio-based polymers were synthesized and designed as polymers phases for adsorption of a variety of pollutants from aqueous solutions. The obtained adsorption results showed that the integration of bio-sourced synthons generate attractive hydrophilicity, and wettability of the resulting adsorbent phase. Such polymers phases enable stronger interactions with the organic and inorganic pollutants in water. A wide variety of different bio-based polymers structures (e. g. poly(ethersulfones, poly(etherphosphines or poly(etherpyridines) with different functional groups were successfully designed in order to adapt chemical structure to different pollutants type and matrice nature. In order to characterize and to determine the correlation between polymer structures and nature of interaction with pollutants, different analytical technics (NMR, GPC, ATG, DSC, Mass spectrometry) were successfully used. Amongst them, MALDI TOF mass spectrometry plays a superior role since this technique enables the simultaneous determination of the polymer structure, polymer end groups and molecular weight. This work focusses on the characterization of synthesized polymers. The chemical structure of the repeating unit, the nature of the end groups, as well as the molecular weight, which are all important for the specific interactions of the polymer with the pollutants were clearly determined and suggestions to improve these interactions by changing the synthetic pathway could be given. T2 - 12. Journees maghreb-europe. Matériaux et Applications aux Dispositifs et Capteurs CY - Monastir, Tunisia DA - 08.11.2022 KW - MALDI TOF MS KW - Biobased polymers KW - Depollution PY - 2022 AN - OPUS4-56237 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidner, Steffen T1 - MALDI-TOF MS und MALDI-MSI zur Identifikation und Klassifizierung von Pollen N2 - Es werden die letzten Ergebnisse präsentiert, die es ermöglichen, einzelne Pollenkörner unterschiedlicher Arten in Mischungen mittels MALDI-TOF Massenspektrometrie bzw. MALDI-TOF Imaging zu messen und unter Zuhilfenahme multivariater Auswertemethoden zu klassifizieren. T2 - 24. Bruker MALDI Anwendertreffen CY - Leipzig, Germany DA - 18.02.2019 KW - MALDI-TOF Massenspektrometrie KW - Pollenkörner KW - Klassifizierung KW - MALDI Imaging KW - Multivariate Analyse PY - 2019 AN - OPUS4-47441 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidner, Steffen T1 - Beispiele für zweidimensionale Kopplungen von Chromatographie und MALDI-TOF-Massenspektrometrie zur Analyse von Polymeren T2 - BAM-Abt. VI-Seminar CY - Berlin, Germany DA - 2003-09-25 PY - 2003 AN - OPUS4-11139 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidner, Steffen T1 - Phasenverhalten Cholesterin enthaltender Seitengruppenpolymere T2 - TU Berlin, AK Prof. Springer CY - Berlin, Germany DA - 1995-11-13 PY - 1995 AN - OPUS4-11275 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidner, Steffen T1 - MALDI Mass spectrometry of synthetic polymers – making molecular elephants to fly N2 - The importance of MALDI TOF mass spectrometry for the analysis of synthetic polymers is shown and some specific issues influencing the analysis e.g. polymer mass dispersity, matrix and matrix homogeneity, nature of cations and end groups, sequence distribution are discussed by means of examples. T2 - Merck Polymer Seminar CY - Online meeting DA - 29.04.2021 KW - MALDI-ToF MS KW - Ionization KW - Desorption KW - Polymers PY - 2021 AN - OPUS4-52545 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidner, Steffen T1 - LC-MALDI Coupling for "quantitative" Analysis of Polymers T2 - NIST CY - Gaithersburg, MD, USA DA - 2002-11-06 PY - 2002 AN - OPUS4-11138 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidner, Steffen T1 - MALDI-TOF MS in der Synthese hochmolekularer Polylaktid Homo- und Copolymere N2 - Die MALDI-TOF Massenspektrometrie stellt eine wichtige Methode zur simultanen Bestimmung von Molmassen, Molmassenverteilungen und Endgruppen von synthetischen Polymeren dar. In dem Vortrag wird gezeigt, welche zusätzlichen Informationen über die Art der Polymerisation, der Nebenreaktionen und der Topologie der gebildeten hochmolekularen Polylaktid-Homo- und Copolymere im Verlauf ihrer Synthese erhalten werden können. T2 - Bruker Anwendertreffen CY - Online meeting DA - 05.03.2021 KW - MALDI KW - Polylaktide PY - 2021 AN - OPUS4-52278 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidner, Steffen T1 - MALDI Imaging MS von Polymeren T2 - BRUKER-Anwendertreffen CY - Kassel, Germany DA - 2011-03-21 PY - 2011 AN - OPUS4-23603 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidner, Steffen T1 - Differences in MALDI Ionization of neat linear and cyclic poly(L-lactide)s N2 - In addition to molar mass distribution (MMD) synthetic polymers often exhibit an additional chemical heterogeneity distribution, expressed by different end groups and other structural variations (e.g. tacticity, copolymer composition etc.). Ionization in MALDI MS is always strongly affected by such chemical properties. For example, the abundance of cyclics in MALDI TOF mass spectra is frequently reported to greatly exceed that of linears. Thus, the MALDI ionization behavior of various neat end-capped linear poly(L-lactide)s and one cyclic poly(L-lactide) was investigated and compared with that of blends of both structures. Moreover, the influence of the cationizing salt was investigated too. Neat compounds and various blends of cyclic and linear species were prepared and studied using two MALDI TOF mass spectrometers under identical conditions with regard to sample preparation and instrumental conditions, except for the laser power and the salt used for cationization. Polymer samples were additionally characterized by NMR and SEC. The steady increase of the laser intensity caused an exponential increase of the peak intensities of both linear and cyclic polylactides.The response of linear polylactides (in the investigated molecular mass range), whether as neat polymer or in blends with other linear polylactides was almost similar. This clearly supports our assumption that ionization in MALDI is probably unaffected by the end group structure.The variation of the laser power shows only little effect on the intensity ratio of linear-to linear and cyclic-to-linear polylactides in blends. Whereas neat linear polylactides at all laser intensities have a significantly higher abundance than neat cyclics, in mixtures of both an overestimation of cyclic species in MALDI TOF mass spectra of polylactides was found. However, this is far less distinct than frequently reported for other polymers.Concluding, peak suppression of linear polymers in mixtures of both architectures can be excluded, which also means, that polylactides showing only peaks of cyclic compounds in their MALDI - TOF mass spectra do not contain a significant fraction of linear analogues. Our study is the first systematic comparison of the MALDI ionization of neat and blended cyclic and linear polylactides. T2 - ASMS 2020 Reboot CY - Online meeting DA - 01.06.2020 KW - MALDI KW - Ionization KW - Linear KW - Cyclic KW - Polylactide PY - 2020 AN - OPUS4-50852 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidner, Steffen T1 - Polymer mass spectrometry at BAM with special emphasis on MALDI and ESI N2 - Since its introduction mass spectrometric techniques like Matrix-assisted Laser Desorption/ionization (MALDI) and Electrospray Ionization (ESI) have become indispensable for synthetic polymer analyses. Ideally, various polymer properties (monomer structure, masses, mass distribution, end groups) can be determined simultaneously. However, in real life these experiments are always affected by important structural parameters and instrumental limitations. A short introduction focussing on latest findings with respect to ionisation principles and mechanisms will be given. Recent results from our group will be presented and efforts to avoid common drawbacks of polymer mass spectrometry will be discussed. In this regard, MALDI - Imaging mass spectrometry and the 2D hyphenation of MS with different chromatographic separation techniques were especially useful, since they can provide additional information and reduce the complexity of polymer analyses. T2 - 21. European Symposium on Polymer Spectroscopy CY - Linz, Austria DA - 13.01.2020 KW - Mass spectrometry KW - MALDI-TOF MS KW - ESI-TOF MS KW - Polymer PY - 2020 AN - OPUS4-50260 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidner, Steffen T1 - MALDI-TOF Massenspektrometrie von Polymeren - Anwendungen, Probleme, Trends T2 - Kolloquium zum Thema "Untersuchungen von synthetischen bzw. Biopolymeren mit MALDI-TOF-MS" CY - Dresden, Germany DA - 2009-12-10 PY - 2009 AN - OPUS4-20151 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidner, Steffen T1 - Zweidimensionale Charakterisierung von PA 6.6 durch Kopplung von LAC und MALDI-MS T2 - 7. Kolloquium "MALDI und synthetische Polymere" CY - Berlin, Germany DA - 2003-05-13 PY - 2003 AN - OPUS4-3094 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidner, Steffen T1 - MALDI von geregelten und ungeregelten Polyamiden nach kritischer Chromatographie T2 - VII. Anwendertreffen MALDI-TOF-MS zur Charakterisierung von synthetischen Polymeren CY - Berlin, Germany DA - 2002-05-14 PY - 2002 AN - OPUS4-11136 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidner, Steffen T1 - Charakterisierung der molekularen und chemischen Heterogenität von Polyoxymethylen (POM) T2 - BASF CY - Ludwigshafen am Rhein, Germany DA - 2005-06-17 PY - 2005 AN - OPUS4-11143 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidner, Steffen T1 - Beispiele für die Anwendung von MALDI-MS in der Polymeranalytik und zur Untersuchung von plasmamodifizierten Polymeroberflächen T2 - Hoechst AG, Werk Kalle Albert CY - Wiesbaden, Germany DA - 1995-09-25 PY - 1995 AN - OPUS4-11274 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidner, Steffen T1 - Sample spot heterogeneity investigated by MALDI-imaging mass spectrometry T2 - 18th International Mass Spectrometry Conference CY - Bremen, Germany DA - 2009-08-30 PY - 2009 AN - OPUS4-19375 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidner, Steffen T1 - LC-MALDI coupling for the analysis of polymers T2 - National Meeting of the Centre National de la Recherche Scientifique (CNRS) CY - Strasbourg, France DA - 2004-06-03 PY - 2004 AN - OPUS4-11308 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidner, Steffen T1 - Multivariate statistics applied to MALDI-TOF MS data of pollen samples N2 - Pollen represent one major cause for human allergic diseases. Currently the characterization and identification of pollen is time-consuming since it mainly relies on the microscopic determination of the genus-specific pollen morphology. A variety of new analytical approaches, like Raman - and fluorescence spectroscopy have been proposed in order to develop fast and reliable pollen identification. Recently matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) was initially applied for the rapid investigation of such complex biological samples. Taxonomic differences and relations of single pollen grains could be identified. Both commercially available lyophilized pollen and fresh pollen acquired from biological samples collected in parks and in the Botanical Garden Berlin in the years 2013-2015 were investigated. The samples were prepared by formic acid extraction in the gas phase and spotted with HCCA matrix. A variety of new approaches, like a newly developed MALDI target with micrometer sample spots sizes, were tested for their suitability. The obtained mass spectral data were investigated by principal component analysis (PCA). The applicability of MALDI-TOF mass spectrometry for the classification of pollen according to their taxonomic relationships was proven. Specifically, chemical differences in the mass spectra at the levels of plant order, genus and in many cases even of species could be identified. Based on these results, further investigations have been undertaken to optimize the sample preparation for the classification of single pollen grains in mixtures of pollens. A novel MALDI-target design was developed to enhance the phenotypic information of pollens in their mass spectra. The combination of mass spectral patterns and multivariate statistics provide a powerful tool for the investigation of structural correlations within mixtures. The results can be used to improve the reconstruction of taxonomic relations of single species in various mixtures and might be useful for the development of a fast routine method to identify pollen based on mass spectrometry. T2 - 64th ASMS Conference on Mass Spectrometry and Allied Topics CY - San Antonio, TX, USA DA - 05.06.2016 KW - Pollen KW - MALDI-TOF Mass Spectrometry KW - Multivariate statistics PY - 2016 AN - OPUS4-36837 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidner, Steffen T1 - Cyclic polylactides via ring-expansion polymerization N2 - We will report on a new kind of ring-expansion polymerization (REP) of cyclic esters based of three classes of catalysts. In contrast to REP described previously these new polymerizations are characterized by a self-extrusion of the catalysts resulting in cyclic homopolyesters as the only reaction product. These REP of L-lactide were performed in bulk at temperatures between 100 and 180°C without racemization. A simplified scheme of a REP catalyzed by BuCa or SnBi is presented below. With meso-lactide temperatures down to 60°C were realized. Depending on catalyst, time and temperature with equal quantities of even and odd-numbered cycles a strong predominance of either even or odd-numbered cycles was found. T2 - 255th ACS National Meeting CY - New Orleans, LA, USA DA - 18.03.2018 KW - MALDI-TOF MS KW - Poly(lactide) KW - Polymerisation KW - Catalysts PY - 2018 AN - OPUS4-44833 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidner, Steffen T1 - MALDI-TOF-MS for the determination of polymerization mechanisms of biodegradable polymers N2 - Eine neue Art einer Ring-Expansion Polymerization (REP) von zyklischen Polylaktiden mittels neuer Katalysatoren wird präsentiert. MALDI-TOF Massenspektrometrie und andere analytische Techniken wurden zur Aufklärung des Mechanismus eingesetzt. Dabei zeigte sich, dass im Gegensatz zu anderen REP, ausschließlich zyklische Polymere gebildet wurden. Diese stellen neue Kandidatenmaterialien für zukünftige neue CRM dar. T2 - 22. MALDI-Kolloquium CY - Berlin, Germany DA - 15.05.2018 KW - MALDI-TOF MS KW - Polylaktid KW - Zyklen PY - 2018 AN - OPUS4-44835 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidner, Steffen T1 - Hyphenated coupling methods for polymer characterization and identification T2 - Dutch Polymer Workshop CY - Jena, Germany DA - 2013-12-09 PY - 2013 AN - OPUS4-30268 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidner, Steffen T1 - Abbau und Zersetzungsverhalten von Polymeren und Komposit‐ Materialien auf Polyurethanbasis N2 - Polyurethane zeichnen sich durch ihre große Flexibilität des Anwendungsbereiches aus. Im Rahmen dieses Vortrags wird ein neues Themenfeldprojekt der BAM vorgestellt und erste Ergebnisse präsentiert. T2 - Deutsche Gesellschaft für Materialprüfung, Fachausschuss Polymerwerkstoffe CY - Darmstadt, Germany DA - 10.11.2016 KW - Polyurethane KW - Abbauverhalten PY - 2016 AN - OPUS4-38332 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidner, Steffen T1 - ^Mass spectrometry of synthetic polymers applications and limitations of the MALDI-TOF technique T2 - APST 2 (Advances in Polymer Science and Technology) CY - Linz, Austria DA - 2011-09-28 PY - 2011 AN - OPUS4-25271 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidner, Steffen T1 - Sample spot heterogeneity investigated by MALDI-imaging mass spectrometry T2 - 57th ASMS Conference On Mass Spectrometry and Allied Topics CY - Philadelphia, PA, USA DA - 2009-05-31 PY - 2009 AN - OPUS4-19191 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidner, Steffen T1 - MALDI-TOF Imaging Mass Spectrometry - an universal detector for copolymer chromatography T2 - ASMS-Conference on Mass Spectrometry CY - Denver, CO, USA DA - 2011-06-04 PY - 2011 AN - OPUS4-23732 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidner, Steffen T1 - MALDI TOF MS zur Aufklärung von Kristallisationsprozessen in Polyestern N2 - MALDI TOF Massenspektrometrie wurde verwendet, um Kristallisationsprozesse in Polyestern (Polylactide, Polyglycolide) zu untersuchen. Dabei konnte gezeigt werden, dass Zyklen und Linearen simultan, aber in unterschiedlichen Kristalliten, kristallisieren. Die dabei ablaufenden Umesterungen (Transesterifizierungen) konnten mit der MALDI TOF Massenspektrometrie nachgewiesen werden. Damit wurde ein völlig neues Anwendungsgebiet dieser MS Methode demonstriert. T2 - 28. Kolloquium Massenspektrometrie von Polymeren CY - Berlin, Germany DA - 14.05.2024 KW - MALDI TOF MS KW - Bioabbaubare Polymere KW - Crystallinity PY - 2024 AN - OPUS4-60029 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidner, Steffen T1 - MALDI-TOF MS von ultra-hochmolekularen Polystyrolen mittels DCTB und Cäsium-Salzen T2 - 19. Kolloquium MALDI und Synthetische Polymere CY - Berlin DA - 2015-05-12 PY - 2015 AN - OPUS4-33055 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidner, Steffen T1 - Untersuchung von plasmamodifizierten Polymeren mit speziellen Analysenmethoden T2 - Abteilungsseminar, BAM, Abt. VI CY - Berlin, Germany DA - 1996-05-02 PY - 1996 AN - OPUS4-6411 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weigel, Sandra T1 - Ein Ausblick: Alternative Bindemittel für bitumenhaltige Materialien N2 - Im Straßen- und Ingenieurbau sind neben dem Baustoff Beton auch bitumenhaltige Materialien in Flächenabdichtungen, Dehnfugenkonstruktionen und Asphaltbelägen von entscheidender Bedeutung. Die bestehende Erdölabhängigkeit dieser Materialien fordert jedoch ein dringendes Umdenken, wobei langfristig die Substitution des Bitumens durch nachhaltige, biobasierte Alternativmaterialien angestrebt werden sollte. Durch eine partielle Substitution wäre zudem bereits kurz- bis mittelfristig eine Reduzierung der Erdölabhängigkeit möglich, wobei sich z.B. Rückstände der Mikroalgenaufbereitung oder Lignin als Substitutionsprodukte eignen. T2 - 11. Jahrestagung des DAfStb mit 63. Forschungskolloquium der BAM Green Intelligent Building CY - Berlin, Germany DA - 16.10.024 KW - Bitumen KW - Alternative Bindemittel KW - Lignin KW - Mikroalgenrückstände PY - 2024 AN - OPUS4-61737 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weigel, Sandra T1 - Charakterisierung von bitumenhaltigen Bindemitteln mittels FTIR Spektroskopie N2 - Die Fourier-Transformations-Infrarotspektroskopie (FTIR-Spektroskopie) bietet eine herausragende Charakterisierungsmöglichkeit für Bitumen und bitumenhaltige Bindemittel. In Kombination mit multivariaten Analysemethoden und somit einem chemometrischen Ansatz erlaubt die FTIR-Charakterisierung Aussagen über verschiedene übergeordnete Eigenschaften, wie die Raffinerie, den Alterungszustand oder die Alterungsempfindlichkeit, eine Abschätzung verschiedener chemischer und physikalischer Kennwerte, wie z.B. den Asphaltengehalt, den Erweichungspunkt Ring und Kugel, die Nadelpenetration sowie den komplexen Schermodul und den Phasenwinkel sowie die Identifizierung verschiedener Additive wie Polymere oder Wachse. T2 - Anwenderseminar MATERIAL 2024 CY - Leipzig, Germany DA - 03.06.2024 KW - Bitumen KW - Charakterisierung KW - FA KW - LDA KW - FTIR KW - PLSR KW - Multivariate Analysemethoden PY - 2024 AN - OPUS4-60741 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weigert, Florian T1 - Recent Advancements of Novel core-shell CdSe Nanocrystals and their Characterization with Single Particle Spectroscopy N2 - Here, we report on the recent advancements in the synthesis and optical properties of novel core-shell CdSe semiconductor nanocrystals (SCNC) with either a thick monolithic shell of CdS or thin multi-shells of succeeding CdS and ZnS monolayers, characterized by steady state and time-resolved fluorescence spectroscopy at the ensemble level. SCNC samples, chosen upon the size of their photoluminescence quantum yield (PL QY), were subsequently investigated at the single particle level using a custom build confocal laser scanning microscope to obtain information on brightness, blinking behavior, and decay kinetics of single SCNCs and correlate these properties with their surface morphology. The results of this study can help to identify new synthetic routes and surface modifications to colloidally and photochemically stable SCNCs with a PL QY of close to unity. T2 - Quantum Dot Workshop, Technical University of Dresden CY - Dresden, Germany DA - 06.02.2017 KW - Quantum Dots KW - Colloidal KW - Single Particle KW - Specctroscopy KW - Quantum Yield KW - Bioapplication KW - CdSe PY - 2017 AN - OPUS4-39205 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weiler, Christiane T1 - Characterisation of the incorporation of Listeria monocytogenes in a raw milk-biofilm T2 - VAAM-Tagung CY - Karlsruhe, Germany DA - 2011-04-03 PY - 2011 AN - OPUS4-23545 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weimann, Karin T1 - Einführung in die Mantelverordnung - Stand der Bundes-Bodenschutz- und Altlastenverordnung N2 - Einführung in die Mantelverordnung Stand der Bundes-Bodenschutz- und Altlastenverordnung, aktuelles zum Aufbau der MVO und zum Stand Anfang 2023 T2 - X. Baustoffseminar - Aktuelles zu Gesteinskörnungen CY - Bad Berka, Germany DA - 17.01.2023 KW - Mantelverordnung KW - Gesteinskörnungen KW - Wiederverwertung PY - 2023 AN - OPUS4-57798 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weimann, Karin T1 - Gipsrecycling – Ein Beitrag zur Ressourceneffizienz im Bauschuttrecycling N2 - Die Rückführung von Baurestmassen in den Stoffkreislauf ist aufgrund der großen jährlichen Anfallmengen von besonderer Bedeutung für eine ressourceneffiziente Wirtschaft. Besonders Bauschutt hat in vielen Fällen ein hohes Potential für eine Wiederverwertung. Vor einer Wieder- oder Weiterverwendung von Sekundärrohstoffen aus Bauschutt muss jedoch neben der technischen Eignung der hergestellten Materialien auch ihre Umweltverträglichkeit, wie z.B. der Schadstoffgehalt, gesichert sein. Entsprechende Normen und technische Regelungen sind mittlerweile europaweit etabliert. Ein weiterer wichtiger Umweltaspekt bei Recyclingverfahren ist die Betrachtung der Umweltwirkungen, die mit der Aufbereitung der Reststoffe verbunden sind. Dabei stehen die Ergebnisse von Ökobilanzen oder ökobilanziellen Bewertungen von Sekundärrohstoffen nicht nur für sich, sondern sollten auch im Kontext mit denen von natürlichen oder industriell gefertigten Rohstoffen bewertet werden. Da im Bausektor der Einsatz von Gips, speziell von Innenausbaumaterialien wie z.B. Gipskartonplatten, in den vergangenen Jahrzehnten stark angestiegen ist, steigt in Abhängigkeit von der jeweiligen Lebensdauer auch der Anteil an Gipsprodukten in Baurestmassen. Beim Kontakt von Gips mit Wasser kann es zur Elution von Sulfaten aus Gipsprodukten kommen. Dies ist aus bautechnischen Gründen (Bildung von treibenden Mineralphasen) und auch in Hinblick auf mögliche Umweltwirkungen sehr ungünstig und entsprechend gehören Sulfate im Sekundärbaustoff zu den begrenzenden Faktoren beim Recycling bzw. bei der Verwertung von Bauschutt und anderen mineralischen Abfällen. Vor diesem Hintergrund ist die getrennte Erfassung von Gipsabfällen nicht nur für ein sortenreines Gipsrecycling, sondern auch für die Wiederverwertung von Bauschutt und damit zweifach sinnvoll. Naturgips ist nicht unbegrenzt verfügbar und sein Abbau ist zudem mit Umweltbelastungen verbunden, während gleichzeitig infolge der Energiewende mit einem Rückgang des Aufkommens von REA-Gips zu rechnen ist. Entsprechend ist für die zukünftige Gipsproduktion der Einsatz von geeignetem RC-Gips naheliegend. Durch geschlossene Kreisläufe kann auch hier ein weiterer wichtiger Beitrag zur Ressourceneffizienz geleistet werden. Das Recycling von Gipsabfällen wird schon seit einigen Jahren in unterschiedlichem Umfang in mehreren europäischen Ländern betrieben. Dabei werden sowohl stationäre als auch mobile Anlagen eingesetzt, die über unterschiedlich komplexe Aufbereitungstechniken verfügen. Für die Verwertung der aufbereiteten RC-Gipse in der Gipsproduktion sind Qualitätsanforderungen festgelegt. Gipskartonplatten sind für die Herstellung von qualitativ hochwertigen RC-Gipsen besonders geeignet. Für das Recycling sind die getrennte Sammlung der Gipsabfälle und der Trans¬port in geeigneten Behältnissen in Hinblick auf eine möglichst hohe Sortenreinheit wichtige Kriterien. Ein Forschungsprojekt im UFOPLAN des Umweltbundesamtes untersucht den aktuellen Stand des Gipsrecyclings in Deutschland und anderen europäischen Ländern und beleuchtet Hemmnisse und Maßnahmen zur Förderung des Gipsrecyclings in Deutschland. Weiterhin werden in einer umfassenden Ökobilanz verschiedene Szenarien zur Gewinnung von RC-Gipsen bewertet. In dem Beitrag werden erste Ergebnisse dieses Projektes aufgezeigt. T2 - Fachtagung Recycling R'16 CY - Weimar, Germany DA - 19.09.2016 KW - Gipsrecycling KW - Bauschuttrecycling KW - Ressourceneffizienz KW - Ökobilanzielle Bewertung PY - 2016 AN - OPUS4-38180 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weimann, Karin T1 - Entwicklungen im Gipsrecycling N2 - Gips gehört zu den nachgefragtesten Baustoffen und entsprechend steigt der Gipsverbrauch weltweit schon seit Jahrzehnten an. In Deutschland wird der Gipsbedarf seit vielen Jahren zu einem guten Teil durch REA-Gips, einem Nebenprodukt aus der Abgasreinigung von Kohlekraftwerken, gedeckt. Die weitere Gipsversorgung erfolgt größtenteils durch die Nutzung natürlicher Gipsvorkommen. Ein geringer, aber steigender Anteil an RC-Gips aus dem Baustoffrecycling und die Nutzung synthetischer Gipse aus Nebenprodukten anderer Industriezweige sind ebenfalls zu verzeichnen. Aufgrund der nationalen Klimaschutzziele und der damit verbundenen Abschaltung von Kohlekraftwerken wird das REA-Gipsangebot in den nächsten Jahren jedoch weiter deutlich zurückgehen, so dass andere Gipsquellen erschlossen werden müssen. Abhängig von der Lebensdauer der verwendeten Gipsprodukte im Bausektor ist infolge des in den vergangenen Jahren erfolgten Anstiegs des Gipsverbrauchs auch mit einer Zunahme von Gipsresten in Bau- und Abbruchabfällen zu rechnen. Im Hinblick auf eine bevorstehende Verknappung von Gips wird die Rückgewinnung dieser Gipse aus Bau- und Abbruchabfällen immer wichtiger. Das Recycling von Gipskartonplatten ist mittlerweile eine etablierte Technik und wird bereits seit einigen Jahren in industriellem Maßstab durchgeführt. Außerdem werden neue Verfahren zur Wiederverwertung weiterer Gipsprodukte aus Rück- und Umbaumaßnahmen untersucht. Von besonderem Interesse sind verschiedene Arten von Gipsplatten, da sie gut für selektiven Rückbau geeignet sind. Daher können sie vergleichsweise frei von Verunreinigungen oder Störstoffen zurückgewonnen werden, was für das Gipsrecycling besonders wichtig ist. In dem vom Bundesministerium für Bildung und Forschung geförderten Forschungsprojekt "GipsRec 2.0" werden technische, wirtschaftliche und ökologische Aspekte des Recyclings von Gipsfaserplatten sowie von verschiedenen Synthesegipsen untersucht und bewertet. Die Aufbereitung von Gipsfaserplatten erfolgte im halbtechnischen Maßstab, an verschiedenen potentiellen Ausgangsstoffen für synthetische Gipse wurden Laborversuche durchgeführt. Erfolgversprechende Verfahrenswege werden ökobilanziell bewertet. Ziel dieser Arbeiten ist die Erschließung der Sekundärrohstoffpotenziale von weiteren Quellen für die RC-Gipsproduktion um mit einer Steigerung des Gipsrecyclings die in naher Zukunft durch die Reduktion der REA-Gips-Bereitstellung entstehende Lücke in der Rohstoffversorgung zu verringern. T2 - 21. ibausil 2023 CY - Weimar, Germany DA - 13.09.2023 KW - Baustoffrecycling KW - Sekundärgipse KW - Ökobilanz PY - 2023 AN - OPUS4-60314 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weimann, Karin T1 - Neue Ansätze beim Gipsrecycling N2 - Gypsum is widely used in the construction sector, and its worldwide consumption has been increasing now for several decades. Currently, the gypsum demand is met up to 60% by FGD gypsum (a by-product from coal-fired power plants) in Germany. The natural gypsum deposits cover the remaining gypsum demand. Due to national climate protection goals and the related shutdown of coal-fired power plants, the FGD gypsum supply will decrease significantly in the coming years and, therefore, other gypsum sources must be found. Depending on the lifetime of the used gypsum products in the construction sector, an increase of gypsum in construction and demolition waste is to be expected. With regard to an upcoming shortage of gypsum, several approaches are being tested to recover gypsum from construction and demolition waste. Gypsum plasterboard recycling is already implemented on an industrial scale. Furthermore, new processes to recycle different types of gypsum products from construction and demolition waste are being examined. Of particular interest are different types of gypsum boards because they are well suited for selective dismantling. Therefore, they can be recovered comparatively free of impurities which is most important for the gypsum recycling. In the research project “GipsRec 2.0”, funded by the Federal Ministry of Education and Research, recycling methods for gypsum fiberboards are being investigated. Additionally, the suitability of different types of synthetic gypsum as substitutes for FGD gypsum is being considered. Currently, the quantities of recycled gypsum are not sufficient with regard to the reduction of FGD gypsum. An increase of gypsum recycling should be achieved to narrow the future gypsum gap that will occur in the near future. T2 - Berliner Konferenz Mineralische Nebenprodukte und Abfälle CY - Berlin, Germany DA - 13.09.2021 KW - Gipsabfälle KW - Gipsrecycling KW - Nachhaltigkeit PY - 2021 AN - OPUS4-53682 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weimann, Karin T1 - Baustoffrecycling: Kreislaufwirtschaft und Umweltschutz N2 - Aktuelle Zahlen zum Baustoffrecycling Zielkonflikte im Kontext von Abfallwirtschaft, Boden- und Grundwasserschutz sowie rechtlichen Vorgabe mit den Beispielen rezyklierte Gesteinskörnungen und RC-Gips. T2 - IX. Baustoffseminar CY - Weimar, Germany DA - 11.03.2020 KW - Kreislaufwirtschaft KW - Baustoffrecycling KW - Ressourcenschonung PY - 2020 AN - OPUS4-51436 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weimann, Karin T1 - Gipskartonplattenrecycling - Ökobilanzielle Betrachtung N2 - Das Recycling von Gipsabfällen wird schon seit einigen Jahren in unterschiedlichem Umfang in mehreren europäischen Ländern betrieben.Für die Verwertung der aufbereiteten RC-Gipse in der Gipsproduktion sind Qualitätsanforderungen festgelegt. Gipskartonplatten sind für die Herstellung von qualitativ hochwertigen RC-Gipsen besonders geeignet. Ein Forschungsprojekt im UFOPLAN des Umweltbundesamtes untersucht den aktuellen Stand des Gipsrecyclings in Deutschland und anderen europäischen Ländern und beleuchtet Hemmnisse und Maßnahmen zur Förderung des Gipsrecyclings in Deutschland. In einer umfassenden Ökobilanz wurden verschiedene Szenarien zur Gewinnung von RC-Gipsen bewertet. In dem Beitrag werden erste Ergebnisse dieses Projektes aufgezeigt. T2 - RT Ressourceneffizienz im Bauwesen CY - Berlin, Germany DA - 14.11.2016 KW - Gipsrecycling KW - Ökobilanzielle Bewertung PY - 2016 AN - OPUS4-46670 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weimann, Karin T1 - Aktueller Stand der Mantelverordnung N2 - Übersicht über Hintergrund, Inhalt und aktuellen Stand der Mantelverordnung. T2 - Baustoffseminar in Weimar - Aktuelles aus der Welt der Gesteinskörnungen CY - Weimar, Germany DA - 10.04.2018 KW - Mantelverordnung PY - 2018 AN - OPUS4-46672 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weimann, Karin T1 - New sources for secondary gypsum N2 - In order to protect natural gypsum deposits and to compensate for the decreasing amount of Flue Gas Desulfurization (FGD) gypsum it is necessary to develop and explore new sources of gypsum. For this purpose, the potentials of different gypsum wastes are investigated in the study “GipsRec 2.0”, funded by the Federal Ministry of Education and Research (Germany). On the one hand, the project worked on a new processing technology for gypsum fiberboards (GFB). While the recycling of gypsum plasterboards has already been carried out on an industrial scale for several years, the recycling of gypsum fiberboards (GFB) has proven to be challenging. Gypsum fiberboards from demolition sites and offcuts from GFB production were used for these investigations. The tests were conducted on a technical scale. Furthermore, various synthetic gypsums are being investigated with regard to their suitability for gypsum production. The analyses are carried out on production residues. In this project, a promising process for gypsum fiberboard recycling could be developed, as well as other waste gypsums are investigated and evaluated with regard to their potential as secondary raw material. In addition, selected process routes are assessed for their environmental impact using a life cycle assessment (LCA) approach. T2 - RILEM - V International Conference Progress of Recycling in the Built Environment CY - Weimar, Germany DA - 10.10.2023 KW - Gypsum recycling KW - Gypsum fiberboards and synthetic gypsum KW - Environmental evaluation PY - 2023 AN - OPUS4-60316 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weimann, Karin T1 - Optimierung des Rückbaus / Abbruchs von Gebäuden zur Rückgewinnung und Aufbereitung von hochwertigen Baustoffen T2 - Workshop "Verwertung ressourcenrelevanter Stoffe aus dem anthropogenen Lager" CY - Berlin, Germany DA - 2010-11-09 PY - 2010 AN - OPUS4-23038 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weimann, Karin T1 - Optimierung des Rückbaus/Abbruchs von Gebäuden zur Aufbereitung und Rückgewinnung von hochwertigen RC-Baustoffen T2 - Baustoff Recycling Forum CY - Nuremberg, Germany DA - 2011-02-10 PY - 2011 AN - OPUS4-23443 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weimann, Karin T1 - Optimierung von Abbruch und Bauschuttaufbereitung zur Rückgewinnung hochwertiger Baustoffe T2 - Arbeitstreffen Ressourceneffizienz im Bauwesen, organisiert vom BMU CY - Berlin, Germany DA - 2011-05-04 PY - 2011 AN - OPUS4-24009 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weimann, Karin T1 - Erfordert die Ersatzbaustoffverordnung neue Methoden des Abbruchs? T2 - BGRB-Kongress "Ressourcenschonung durch Baustoffrecycling" CY - Bonn, Germany DA - 2011-09-13 PY - 2011 AN - OPUS4-24397 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weimann, Karin T1 - Reducing Sulphates in crushed concrete - improving the building material properties of Recycled Concrete Aggregates T2 - Concrete in the low carbon Era CY - Dundee, Scotland DA - 2012-07-08 PY - 2012 AN - OPUS4-26156 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weimann, Karin T1 - Abbrucharbeiten und Recyclingbeton vor dem Hintergrund der Sulfatproblematik T2 - Symposium "Umweltschutz auf der Baustelle" CY - Bonn, Deutschland DA - 2015-03-10 PY - 2015 AN - OPUS4-32830 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weimann, Karin T1 - Ressourceneffizienz im Bauwesen - Rahmen und Möglichkeiten T2 - Fachtagung Recycling R'13 CY - Weimar, Germany DA - 2013-09-19 PY - 2013 AN - OPUS4-29225 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weimann, Karin T1 - Environment evaluation of different ways to produce recycled concrete aggregates T2 - SUM 2014 - Symposium on Urban Mining CY - Bergamo, Italy DA - 2014-05-19 PY - 2014 AN - OPUS4-30869 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weimann, Karin T1 - Ressourceneffizienz bewerten - Ansätze im VDI N2 - Vorstellung von methodischen Grundlagen für eine Ressourceneffizienzanalyse T2 - 3. Fachkonferenz "Stärkung des Einsatzes von mineralischen Recycling-Baustoffen" CY - Potsdam, Germany DA - 05.03.2018 KW - Ressourceneffizienz PY - 2018 AN - OPUS4-46683 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weimann, Karin T1 - VDI-Richtlinien zur Bewertung der Ressourceneffizienz - Aktueller Stand T2 - 6. Sitzung Runder Tisch Ressourceneffizienz (BMUB) CY - Berlin, Deutschland DA - 2015-11-24 PY - 2015 AN - OPUS4-35005 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weimann, Karin T1 - Gips in Bauschutt - Probleme und Lösungsansätze T2 - Aufbereitung und Recycling 2015 CY - Freiberg, Germany DA - 2015-11-11 PY - 2015 AN - OPUS4-35004 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weimann, Karin T1 - Nassaufbereitung von Betonbrechsand mit dem Ziel der vollständigen Verwertung T2 - Recycling 2003 (Tagung Bauhaus Uni Weimar) CY - Weimar, Germany DA - 2003-03-27 PY - 2003 AN - OPUS4-5447 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weimann, Karin T1 - Zielkonflikte beim Baustoffrecycling N2 - Ausgehend von der aktuellen Situation in Deutschland werden die Themen Baustoffaufbereitung, Ressourceneffizienz vorgestellt und Möglichkeiten zur Verbesserung der Baustoffqualität von Baurestmassen vorgestellt. Zielkonflikte und Beispiele dazu aus dem Baubereich (z.B. Mantelverordnung) werden benannt. T2 - 5. Treffen Netzwerk Ressourcenschonung CY - Berlin, Germany DA - 10.05.2019 KW - Baustoffrecycling PY - 2019 AN - OPUS4-48408 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weimann, Karin T1 - Mantelverordnung - aktueller Stand N2 - Hintergrund, Inhalt und Ziele sowie aktueller Stand der Mantelverordnung T2 - Thomas Baustoffthemen - Zukünftiges Recycling CY - Jena, Germany DA - 21.02.2019 KW - Mantelverordnung PY - 2019 AN - OPUS4-48074 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weimann, Karin T1 - Gypsum plasterboard recycling N2 - The use of secondary building materials can meet the requirements of sustainability in several ways: the extended time availability of primary raw materials and, thereby, the protection of natural ressources as well as the conservation of landfill sites. Regarding the predicted decrease of gypsum supply in Germany, particularly the recycling of gypsum (calcium sulfate) is of growing importance. Currently, the gypsum demand is fulfilled (at least 60%) by gypsum as side product from coal-fired power plants (FGD Gypsum). Germany’s natural gypsum deposits fulfil the remaining gypsum demand. Due to national climate protection goals the gypsum supply from coal power plants will decrease significantly in the future. In addition, the content of sulfates in other secondary building materials, in particular in recycled concrete aggregates, should be minimized for quality reasons. Separated gypsum can be used in gypsum production if the high quality requirements for recycled gypsum are met. Accordingly, there have been significant advancements in the processing of gypsum residues in the last years. Since almost all processing steps in the recycling process are associated with environmental impacts, an evironmental evaluation of the use of recycled gypsum as a substitute in gypsum production has to be carefully conducted. The presentation focusses on the techniques for generating recycled gypsum from gypsum plaster boards, the related quality requirements and a comprehensive environmental evaluation of the complete process. T2 - MINEA Workshop: Recovery Potential of Construction and Demolition Waste CY - Brussels, Belgium DA - 21.03.2019 KW - Gypsum KW - CDW processing KW - Environmental evaluation PY - 2019 AN - OPUS4-48220 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weimann, Karin T1 - Faserhaltige Abfälle - "End-of-Life"-Herausforderungen N2 - Vortrag über die End-of-Life-Problematik von carbonfaserverstärkten Werkstoffen und potentielle Entsorgungswege. T2 - 9. Sitzung LAGA Ad-hoc-Ausschuss "Entsorgung faserhaltiger Abfälle" CY - Mannheim, Germany DA - 23.01.2019 KW - CFK KW - Carbonfaser KW - Carbonbeton PY - 2019 AN - OPUS4-48267 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weimann, Karin T1 - Optimierung von Rückbau und Aufbereitung von Altbeton T2 - 52. DAfStb-Forschungskolloquium 2011, Innovative Forschung für den Betonbau CY - Berlin, Germany DA - 2011-11-07 PY - 2011 AN - OPUS4-24733 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weimann, Karin T1 - Ökobilanzielle Bewertungen von Abbruch- und Aufbereitungsverfahren als Grundlage für ein optimiertes Bauschuttrecycling T2 - 18. ibausil (Internationale Baustofftagung) CY - Weimar, Germany DA - 2012-09-12 PY - 2012 AN - OPUS4-26533 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weimann, Karin A1 - Adam, Christian T1 - Advantages of recycling gypsum plasterboards N2 - During the last decades the material composition of buildings has become increasingly diverse. However, largely sorted material flows are needed for generating high quality secondary building materials. The use of secondary building materials can meet the requirements of sustainability in several ways: the extended time availability of primary raw materials and, thereby, the preservation of natural resources as well as the conservation of landfill sites. Recycling of gypsum (calcium sulfate) can be a good example for the environmental benefits of closed-loop recycling. The content of sulfates in other secondary building materials, in particular in recycled concrete aggregates, should be minimized for quality reasons. In contrast, separated gypsum can also be used in gypsum production if the high quality requirements for the recycled gypsum are met. Since almost all processing steps in the recycling process are associated with environmental impacts, an environmental evaluation of the use of recycled gypsum as a substitute in gypsum production has to be carefully conducted. This paper focusses on the techniques for generating recycled gypsum from gypsum plasterboards, the related quality requirements and a comprehensive environmental evaluation of the complete process. T2 - IV International Conference Progress of Recycling in the Built Environment CY - Lisbon, Portugal DA - 11.10.2018 KW - Environmental evaluation KW - CDW processing KW - Gypsum PY - 2018 AN - OPUS4-48079 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weimann, Karin A1 - Adam, Christian T1 - Sustainability in the production of recycled concrete aggregates N2 - Concrete is one of the most widely used construction materials and, accordingly, the concrete industry is an important stakeholder in the field of sustainable construction. Therefore various approaches have been implemented to increase the sustainability of concrete. Besides reducing CO2-emissions during cement production, increasing the energy efficiency of buildings and extending their life span, the end-of-life performance of concrete is also an essential aspect of sustainability. Reusing concrete as a secondary building material meets the requirements of sustainability in several ways: the extended time availability of primary raw materials and, thereby, the protection of natural resources as well as conserving landfill site. Furthermore, the production of recycled concrete aggregates (RCA) is a good example for closed-loop recycling. However, regarding the use of RCA as a substitute for natural aggregates in concrete, attention must be paid to all issues of sustainability: this means that environmental, economic and social aspects have to be considered. Since RCA generally have inferior building material properties, such as higher porosity and lower density, the implementation of closed-loop recycling of concrete only makes sense if the technical quality assurance is secured. This paper focusses on the implementation of techniques for the deconstruction/demolition of buildings and the subsequent treatment of concrete rubble in order to improve the building material properties of RCA with regard to the requirements of sustainability and also technical rules and standards. T2 - The 9th International Concrete Conference CY - Dundee, UK DA - 04.07.2016 KW - RCA (Recycled concrete aggregates) KW - Gypsum KW - Selective dismantling KW - CDW treatment KW - Gips KW - Bauschuttaufbereitung PY - 2016 AN - OPUS4-38176 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -