TY - CONF A1 - Bruno, Giovanni A1 - Maierhofer, Christiane T1 - Neue Abenteuer an der BAM: die Projekte AGIL und ProMoAM N2 - Zwei neue Projekte wurden in der BAM gestartet: AGIL und ProMoAM, die mit der Charakterisierung additiv gefertigter Wrkstoffe und mit dem Prozessmonitoring in der AF sich befassen. Die sind in diesem Vortrag dargestellt T2 - Symposium Materialcharakterisierung CY - BAM, Berlin, Germany DA - 28.11.2017 KW - Additive Fertigung KW - Prozess Monitoring KW - Alterung KW - Metallische Werkstoffen KW - Laser Metal Deposition KW - Selective Laser Melting PY - 2017 AN - OPUS4-43273 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Brink, Arne A1 - Röllig, Mathias A1 - Wiggenhauser, Herbert T1 - Impulse Thermography for locating voids and honeycombing in concrete structures supported by numerical simulations T2 - 11th Symposium of Building Physics 2002 T2 - 11th Symposium of Building Physics 2002 CY - Dresden, Germany DA - 2002-09-26 PY - 2002 AN - OPUS4-3887 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Brink, Arne A1 - Röllig, Mathias A1 - Wiggenhauser, Herbert A1 - Hillemeier, B. A1 - Rieck, C. T1 - Untersuchung des Einflusses von Feuchtigkeit auf die Ortung von Hohlstellen in Betonstrukturen mit der Impuls-Thermografie T2 - 11. Feuchtetag 2002 T2 - 11. Feuchtetag 2002 CY - Weimar, Germany DA - 2002-09-18 PY - 2002 AN - OPUS4-3888 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Kind, Thomas T1 - Application of georadar for the determination of moisture content and distribution in masonry T2 - Workshop of the RILEM Rechnical Committee 177MDT: Site control and non-destructive evaluation of masonry structures and materials T2 - Workshop of the RILEM Rechnical Committee 177MDT: Site control and non-destructive evaluation of masonry structures and materials CY - Mantua, Italy DA - 2001-11-13 PY - 2001 AN - OPUS4-3889 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Wendrich, Astrid A1 - Köpp, Christian T1 - On-site investigation techniques for the structural evaluation of historic masonry buildings (EC-Project in the Environment and Sustainable Development Programme (EESD) T2 - 6th International Masonry Conference (6IMC) T2 - 6th International Masonry Conference (6IMC) CY - London, England DA - 2002-11-04 PY - 2002 AN - OPUS4-3890 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Kohl, Christoph T1 - Radar und kombinierte Verfahren T2 - Forschergruppe 384, 2. Workshop - Klausursitzung, MFPA Weimar T2 - Forschergruppe 384, 2. Workshop - Klausursitzung, MFPA Weimar CY - Weimar, Germany DA - 2002-09-17 PY - 2002 AN - OPUS4-3877 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Köpp, Christian A1 - Wendrich, Astrid T1 - Entwicklung zerstörungsfreier und zerstörungsarmer Prüfverfahren zur Untersuchung und Bewertung historischen Mauerwerks T2 - 4. rescon, Erfurter Fachtagung für Konservierung und Restaurierung T2 - 4. rescon, Erfurter Fachtagung für Konservierung und Restaurierung CY - Erfurt, Germany DA - 2002-11-28 PY - 2002 AN - OPUS4-3868 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Kind, Thomas T1 - Application of Impulse Radar for Non-Destructive Investigation of Concrete Structures T2 - 9th International Conference on Ground Penetrating Radar 2002 - GPR 2002 T2 - 9th International Conference on Ground Penetrating Radar 2002 - GPR 2002 CY - Santa Barbara, CA, USA DA - 2002-04-29 PY - 2002 AN - OPUS4-3303 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Brink, Arne A1 - Röllig, Mathias A1 - Wiggenhauser, Herbert T1 - Anwendung der Impuls-Thermografie als quantitatives zerstörungsfreies Prüfverfahren im Bauwesen T2 - DGZfP-Jahrestagung 2002: ZfP in Anwendung, Entwicklung und Forschung T2 - DGZfP-Jahrestagung 2002: ZfP in Anwendung, Entwicklung und Forschung CY - Weimar, Germany DA - 2002-05-06 PY - 2002 AN - OPUS4-3304 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Brink, Arne A1 - Röllig, Mathias A1 - Wiggenhauser, Herbert T1 - Transient thermography for non-destructive investigation of building structures in the near surface region T2 - RILEM Technical Committee 177-MDT Workshop on On-Site Control and Non-Destructive Evaluation of Masonry Structures T2 - RILEM Technical Committee 177-MDT Workshop on On-Site Control and Non-Destructive Evaluation of Masonry Structures CY - Mantua, Italy DA - 2003-11-12 PY - 2003 AN - OPUS4-3836 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Arndt, Ralf A1 - Röllig, Mathias A1 - Weritz, Friederike A1 - Wiggenhauser, Herbert T1 - Untersuchung von Betonstrukturen mit der Puls-Phasen-Thermografie T2 - Thermografie Kolloquium 2003 an der Universität Stuttgart T2 - Thermografie Kolloquium 2003 an der Universität Stuttgart CY - Stuttgart, Germany DA - 2003-09-25 PY - 2003 AN - OPUS4-3838 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Wöstmann, Jens A1 - Brink, Arne A1 - Röllig, Mathias T1 - Ortung von Hohlstellen und Ablösungen in Betonkonstruktionen mit Radar und Impuls-Thermografie T2 - GESA-Symposium 2003, Sicherheit und Wirtschaftlichkeit durch Messtechnik, Monitoring und Beanspruchungsanalyse T2 - GESA-Symposium 2003, Sicherheit und Wirtschaftlichkeit durch Messtechnik, Monitoring und Beanspruchungsanalyse CY - Braunschweig, Germany DA - 2003-06-12 PY - 2003 AN - OPUS4-3840 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane T1 - Anwendung der Impuls Thermografie zur Strukturuntersuchung von Bauteilen im oberflächennahen Bereich T2 - Fachausschusssitzung ZfP Bauwesen (FA B, DGZfP) T2 - Fachausschusssitzung ZfP Bauwesen (FA B, DGZfP) CY - Berlin, Germany DA - 2002-03-12 PY - 2002 AN - OPUS4-3860 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Wendrich, Astrid A1 - Köpp, Christian T1 - ONSITEFORMASONRY - A European Research Project: On-site investigation techniques for the structural evaluation of historic masonry T2 - NDT-CE 2003, International Symposium of Non-Destructive Testing in Civil Engineering T2 - NDT-CE 2003, International Symposium of Non-Destructive Testing in Civil Engineering CY - Berlin, Germany DA - 2003-09-16 PY - 2003 AN - OPUS4-3823 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Krause, Martin A1 - Niederleithinger, Ernst A1 - Wiggenhauser, Herbert T1 - Non-destructive testing methods at BAM for damage assessment and quality assurance in civil engineering T2 - NDT-CE 2003, International Symposium of Non-Destructive Testing in Civil Engineering T2 - NDT-CE 2003, International Symposium of Non-Destructive Testing in Civil Engineering CY - Berlin, Germany DA - 2003-09-16 PY - 2003 AN - OPUS4-3829 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane T1 - Die Ortung von Hohlstellen und Kiesnestern in Beton mit der Impuls-Thermografie T2 - Workshop zur Anwendung der Impuls-Thermografie im Bauwesen T2 - Workshop zur Anwendung der Impuls-Thermografie im Bauwesen CY - Berlin, Germany DA - 2005-04-21 PY - 2005 AN - OPUS4-11287 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane T1 - Untersuchung von historischem Mauerwerk mit der Puls-Phasen-Thermografie / Altes Museum und Wartburg T2 - Workshop zur Anwendung der Impuls-Thermografie im Bauwesen T2 - Workshop zur Anwendung der Impuls-Thermografie im Bauwesen CY - Berlin, Germany DA - 2005-04-21 PY - 2005 AN - OPUS4-11289 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Köpp, Christian A1 - Wendrich, Astrid T1 - Verborgene Türen und vergessene Kaminschächte: Europäisches Projekt entwickelt neue Strategien zur zerstörungsfreien Untersuchung an Baudenkmalen T2 - BAM-Kolloquium T2 - BAM-Kolloquium CY - Berlin, Germany DA - 2005-01-26 PY - 2005 AN - OPUS4-11290 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Arndt, Ralf A1 - Röllig, Mathias T1 - Influence of concrete properties on the detection of voids with impulse-thermography T2 - 8th International Workshop on Advanced Infrared Technology and Applications 2005 (AITA) T2 - 8th International Workshop on Advanced Infrared Technology and Applications 2005 (AITA) CY - Rome, Italy DA - 2005-09-07 PY - 2005 AN - OPUS4-11306 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane T1 - Application and combination of non-destructive testing methods for the assessment of the immovable cultural heritage T2 - COST Strategic Workshop "COST and Cultural Heritage: Crossing Borders" T2 - COST Strategic Workshop "COST and Cultural Heritage: Crossing Borders" CY - Florence, Italy DA - 2005-10-20 PY - 2005 AN - OPUS4-11293 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Myrach, Philipp A1 - Steinfurth, Henrik T1 - Einfluss von Material, Messparametern und Umgebungsbedingungen auf die Nachweisempfindlichkeit der Blitzthermografie T2 - DGZfP-Jahrestagung 2013 T2 - DGZfP-Jahrestagung 2013 CY - Dresden, Germany DA - 2013-05-06 PY - 2013 AN - OPUS4-28497 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane T1 - Aktuelle und zukünftige Standards für die Thermografie in der zerstörungsfreien Prüfung T2 - VATh-Frühjahrssymposium T2 - VATh-Frühjahrssymposium CY - Bremen, Germany DA - 2013-05-02 PY - 2013 AN - OPUS4-28498 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Reischel, Mercedes A1 - Myrach, Philipp A1 - Steinfurth, Henrik T1 - Anwendung der aktiven Thermografie zur zerstörungsfreien Prüfung von Faserverbundwerkstoffen T2 - Temperatur 2013 bei der PTB T2 - Temperatur 2013 bei der PTB CY - Berlin, Germany DA - 2013-06-05 PY - 2013 AN - OPUS4-28752 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Ziegler, Mathias A1 - Kunert, M. A1 - Goldammer, M. T1 - Entwicklung von Referenzprobekörpern für die Standardisierung der Blitzthermografie T2 - Thermografie Kolloquium 2011 T2 - Thermografie Kolloquium 2011 CY - Stuttgart, Germany DA - 2011-09-29 PY - 2011 AN - OPUS4-24548 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Doroshtnasir, Manoucher A1 - Steinfurth, Henrik A1 - Ziegler, Mathias A1 - Kreutzbruck, Marc A1 - Scheuerlein, C. A1 - Heck, S. J. T1 - Comparison of different infrared camera systems and excitation strategies for testing of solder connections T2 - 11th International Workshop on Advanced Infrared Technology and Applications T2 - 11th International Workshop on Advanced Infrared Technology and Applications CY - L'Aquila, Italy DA - 2011-09-07 PY - 2011 AN - OPUS4-24432 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane T1 - Entwicklung von Normen und Standards für aktive Thermografie mit Blitzlichtanregung T2 - Workshop Blitzerthermographie der DGZfP T2 - Workshop Blitzerthermographie der DGZfP CY - Berlin, Germany DA - 2011-06-27 PY - 2011 AN - OPUS4-24433 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane T1 - Untersuchung von Schädigungsprzessen an Bauteiloberflächen und -grenzflächen mit Hilfe optischer und thermografischer zerstörungsfreier Prüfverfahren, Ergebnisse eines Projektes der Forschungsinitiative "Zukunft Bau" T2 - Thermografie am Bau, Seminar der DGZfP T2 - Thermografie am Bau, Seminar der DGZfP CY - Berlin, Germany DA - 2011-06-28 PY - 2011 AN - OPUS4-24434 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane T1 - Prinzip der aktiven Termografie im Bauwesen und Anwendungen in der Denkmalpflege T2 - Thermografie am Bau, Seminar der DGZfP T2 - Thermografie am Bau, Seminar der DGZfP CY - Berlin, Germany DA - 2011-06-28 PY - 2011 AN - OPUS4-24435 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Köpp, Christian A1 - Wendrich, Astrid T1 - Application of NDT and MDT methods to the assessment of historical structures - case studies of the EC project ONSITEFORMASONRY T2 - EC Clustering Workshop "Protecting Europs Cultural Heritage through EU technological research" T2 - EC Clustering Workshop "Protecting Europs Cultural Heritage through EU technological research" CY - Brussels, Belgium DA - 2004-09-01 PY - 2004 AN - OPUS4-5212 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Köpp, Christian A1 - Wendrich, Astrid T1 - On-site investigation techniques for the structural evaluation of historic masonry buildings - a European research project T2 - Structural Analysis of Historical Constructions / 4th International Seminar on Structural Analysis of Historical Constructions T2 - Structural Analysis of Historical Constructions / 4th International Seminar on Structural Analysis of Historical Constructions CY - Padua, Italy DA - 2004-11-10 PY - 2004 AN - OPUS4-5210 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Krause, Martin A1 - Wöstmann, Jens A1 - Röllig, Mathias A1 - Arndt, Ralf A1 - Streicher, Doreen A1 - Kohl, C. T1 - Influence of concrete properties on tne calibration of radar, ultrasonics and active thermography T2 - First International RILEM Symposium on On Site Assessment of Concrete, Masonry and Timber Structures SaCoMaTiS 2008 T2 - First International RILEM Symposium on On Site Assessment of Concrete, Masonry and Timber Structures SaCoMaTiS 2008 CY - Varenna, Italy DA - 2008-09-01 PY - 2008 AN - OPUS4-17919 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Wöstmann, Jens A1 - Trela, Christiane A1 - Röllig, Mathias T1 - Investigation of moisture content and distribution with radar and active thermography T2 - First International RILEM Symposium on On Site Assessment of Concrete, Masonry and Timber Structures SaCoMaTiS 2008 T2 - First International RILEM Symposium on On Site Assessment of Concrete, Masonry and Timber Structures SaCoMaTiS 2008 CY - Varenna, Italy DA - 2008-09-01 PY - 2008 AN - OPUS4-17920 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane T1 - Keynote lecture: Combination of non-destructive testing methods for the assessment of masonry structures T2 - First International RILEM Symposium on ON Site Assessment of Concrete, Masonry and Timber Structures SaCoMaTiS 2008 T2 - First International RILEM Symposium on ON Site Assessment of Concrete, Masonry and Timber Structures SaCoMaTiS 2008 CY - Varenna, Italy DA - 2008-09-01 PY - 2008 AN - OPUS4-17905 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Kohl, Christoph A1 - Mayer, K. T1 - Radar in der DFG-Forschergruppe FOR384 T2 - Fachtagung 2005 des Deutschen Ausschuss für Stahlbeton (DAfStb), Zerstörungsfreie Prüfverfahren und Bauwerksdiagnose im Betonbau T2 - Fachtagung 2005 des Deutschen Ausschuss für Stahlbeton (DAfStb), Zerstörungsfreie Prüfverfahren und Bauwerksdiagnose im Betonbau CY - Berlin, Germany DA - 2005-03-10 PY - 2005 AN - OPUS4-7146 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Köpp, Christian T1 - Verfahren und Prüfmethodik: Klassifizierung historischen Mauerwerks im Hinblick auf die Bewertung mit zerstörungfsfreier Prüfung T2 - Themennachmittag: Untersuchung und Bewertung historischer Bausubstanz- minimalinvasive Untersuchungsmethoden und ihre Anwendung in der Praxis an der FH Potsdam T2 - Themennachmittag: Untersuchung und Bewertung historischer Bausubstanz- minimalinvasive Untersuchungsmethoden und ihre Anwendung in der Praxis an der FH Potsdam CY - Potsdam, Germany DA - 2007-01-23 PY - 2007 AN - OPUS4-15947 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Köpp, Christian T1 - Zerstörungsfreie Prüfverfahren zur Untersuchung von historischem Mauerwerk T2 - Gastvortragsreihe des Studiengangs Restaurierung an der FH Potsdam T2 - Gastvortragsreihe des Studiengangs Restaurierung an der FH Potsdam CY - Potsdam, Germany DA - 2007-01-09 PY - 2007 AN - OPUS4-15948 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Kohl, C. A1 - Wöstmann, Jens A1 - Zacher, Gerhard T1 - Radar und Datenfusion T2 - Abschlusskolloquium der DFG-Forschergruppe FOR 384 an der Bundesanstalt für Straßenwesen (BASt) T2 - Abschlusskolloquium der DFG-Forschergruppe FOR 384 an der Bundesanstalt für Straßenwesen (BASt) CY - Bergisch Gladbach, Germany DA - 2007-05-03 PY - 2007 AN - OPUS4-15951 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Köpp, Christian A1 - Hamann, M. A1 - Hennen, Ch. A1 - Binda, L. A1 - Saisi, A A1 - Zanzi, L. T1 - Non-destructive investigations of the structural elements of the "Altes Museum" in Berlin T2 - 10th International Conference on Studies, Repairs and Maintenance of Heritage Architecture (STREHMA 2007) T2 - 10th International Conference on Studies, Repairs and Maintenance of Heritage Architecture (STREHMA 2007) CY - Prague, Czech Republic DA - 2007-06-04 PY - 2007 AN - OPUS4-16061 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane T1 - Methods and technologies for non-destructive testing in civil engineering T2 - Seminars on Preventive Conservation and Monitoring of Architectural Heritage (SPRECOMAH 2007) T2 - Seminars on Preventive Conservation and Monitoring of Architectural Heritage (SPRECOMAH 2007) CY - Leuven, Belgium DA - 2007-06-11 PY - 2007 AN - OPUS4-16062 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Arndt, Ralf T1 - Einfluss von Oberflächen- und Volumeneigenschaften auf die zerstörungsfreie Prüfung von Beton und Mauerwerk mit aktiver Thermografie T2 - DACH-Jahrestagung 2008 Zerstörungsfreie Materialprüfung T2 - DACH-Jahrestagung 2008 Zerstörungsfreie Materialprüfung CY - St. Gallen, Switzerland DA - 2008-04-28 PY - 2008 AN - OPUS4-18109 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane T1 - Anwendung der Impuls-Thermografie zur Strukturuntersuchung von Bauteilen im oberflächennahen Bereich T2 - Fachausschusssitzung ZfP Bauwesen (FA B, DGZfP) T2 - Fachausschusssitzung ZfP Bauwesen (FA B, DGZfP) CY - Berlin, Germany DA - 2002-03-12 PY - 2002 AN - OPUS4-6081 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane T1 - WG1 - Assessment, monitoring and diagnosis T2 - 1st Focus Area Cultural Heritage (ECTP) Plenary Assembly T2 - 1st Focus Area Cultural Heritage (ECTP) Plenary Assembly CY - Cavtat, Croatia DA - 2006-10-14 PY - 2006 AN - OPUS4-14079 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane T1 - Best practise 1: European construction Technology Platform (ECTP), Focus Area Cultural Heritage T2 - Sitzung des Arbeitskreises Europa der Leipniz-Gemeinschaft im Wissenschaftszentrum Berlin für Sozialforschung T2 - Sitzung des Arbeitskreises Europa der Leipniz-Gemeinschaft im Wissenschaftszentrum Berlin für Sozialforschung CY - Berlin, Germany DA - 2006-11-09 PY - 2006 AN - OPUS4-14080 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane T1 - Verfahren und Prüfmethodik: Klassifizierung historischen Mauerwerks im Hinblick auf Bewertung mit zerstörungsfreier Prüfung T2 - Vortragsreihe "Bauen im Bestand: Untersuchen, Bewerten und Benutzen historischer Bausubstanz", gemeinsame Veranstaltung VDI Bezirksverein Berlin-Brandenburg, AK Bautechnik und AK Bautechnikgeschichte im Deutschen Technikmuseum T2 - Vortragsreihe "Bauen im Bestand: Untersuchen, Bewerten und Benutzen historischer Bausubstanz", gemeinsame Veranstaltung VDI Bezirksverein Berlin-Brandenburg, AK Bautechnik und AK Bautechnikgeschichte im Deutschen Technikmuseum CY - Berlin, Germany DA - 2006-11-07 PY - 2006 AN - OPUS4-14081 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Arndt, Ralf A1 - Röllig, Mathias T1 - Aktive Thermografie zur zerstörungsfreien Ortung von Ablösungen und Fehlstellen in Beton und Mauerwerk T2 - Bauwerksdiagnose 2006 T2 - Bauwerksdiagnose 2006 CY - Berlin, Germany DA - 2006-02-23 PY - 2006 AN - OPUS4-14083 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane T1 - Innovative zerstörungsfreie Prüfverfahren zur Beurteilung und Erhaltung historischer Bauwerke T2 - Innovationen im Bauwesen - DENKMALSCHUTZ, Vortragsveranstaltung der Technologiestiftung Berlin in der Neuen Mälzerei T2 - Innovationen im Bauwesen - DENKMALSCHUTZ, Vortragsveranstaltung der Technologiestiftung Berlin in der Neuen Mälzerei CY - Berlin, Germany DA - 2007-09-06 PY - 2007 AN - OPUS4-15808 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane T1 - ONSITEFORMASONRY - On-site investigation techniques for the structural evaluation of historic masonry buildings T2 - EC Clustering Workshop "Protecting Europs Cultural Heritage through EU technological research" T2 - EC Clustering Workshop "Protecting Europs Cultural Heritage through EU technological research" CY - Brussels, Belgium DA - 2004-04-22 PY - 2004 AN - OPUS4-4811 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Myrach, Philipp A1 - Seidel, T. A1 - Mecke, R. A1 - Schiller, M. A1 - Meinhardt, J. A1 - Kalisch, U. A1 - Groll, T. T1 - Untersuchung der Putzritzungen am Magdeburger Dom mit aktiver Thermografie und optischen 3D-Verfahren T2 - Thermografie-Kolloquium 2013 T2 - Thermografie-Kolloquium 2013 CY - Leinfelden-Echterdingen, Germany DA - 2013-09-26 PY - 2013 AN - OPUS4-29280 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane T1 - Anforderungen an Geometrie- und Zeitauflösung anhand unterschiedlicher Anwendungsbeispiele der aktiven Thermografie in der zerstörungsfreien Prüfung T2 - Thermografie Tag "Forschung und Entwicklung" der Infra Tec GmbH T2 - Thermografie Tag "Forschung und Entwicklung" der Infra Tec GmbH CY - Dresden, Germany DA - 2013-10-08 PY - 2013 AN - OPUS4-29247 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Wöstmann, Jens A1 - Milmann, Boris A1 - Hennen, Ch. T1 - Structural Assessment of Stone Walls of St. Servatius Church in Quedlinburg T2 - Third International Congress on Construction History, University of Technology Cottbus T2 - Third International Congress on Construction History, University of Technology Cottbus CY - Cottbus, Germany DA - 2009-05-20 PY - 2009 AN - OPUS4-19720 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Röllig, Mathias A1 - Mecke, R. A1 - Schiller, M. A1 - Seidl, T. A1 - Kalisch, U. A1 - Meinhardt, J. A1 - Hennen, C. T1 - Monitoring of damage processes at surface of historic structures using a combination of 3D laser scanner and active thermography T2 - Technart 2011, BAM T2 - Technart 2011, BAM CY - Berlin, Germany DA - 2011-04-26 PY - 2011 AN - OPUS4-23786 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Reischel, Mercedes A1 - Röllig, Mathias A1 - Myrach, Philipp A1 - Ziegler, Mathias A1 - Steinfurth, Henrik T1 - Development of reference test specimens for the standardization of active thermography with flash excitation T2 - 11th Conference on Quantitative InfaRed Thermography QIRT 2012 T2 - 11th Conference on Quantitative InfaRed Thermography QIRT 2012 CY - Naples, Italy DA - 2012-06-11 PY - 2012 AN - OPUS4-26716 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Ziegler, Mathias A1 - Krankenhagen, Rainer A1 - Myrach, Philipp A1 - Schlichting, Joachim T1 - Risscharakterisierung mit aktiver Thermografie - Ortung und geometrische Erfassung in unterschiedlichen Werkstoffen T2 - Hamburger NDT-Tage T2 - Hamburger NDT-Tage CY - Hamburg, Germany DA - 2013-11-13 PY - 2013 AN - OPUS4-29741 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Steinfurth, Henrik A1 - Mecke, R. A1 - Schiller, M. A1 - Kernchen, A. A1 - Kalisch, U. A1 - Meinhardt, J. A1 - Hennen, C. A1 - Groll, E.T. A1 - Arnold, T. T1 - Characterisation of historic facades using active thermography with solar heating and optical methods N2 - Active thermography is well suited for the detection of delaminations and cracks in façade elements like plaster and tiles. Not only artificial heating but also solar heating can be used if the adjustment of the façade and the weather conditions are suitable. Optical methods like laser scanners, photogrammetric methods and crack tracking sensors are providing geometrical 3D data which can be used for a 3D mapping of thermograms and for providing data with higher geometrical resolution. Thus, by the combination and fusion of these data, a comprehensive mapping and monitoring of damages of façade systems is possible. T2 - 19th World Conference on Non-destructive Testing (WCNDT) CY - Munich, Germany DA - 13.06.2016 KW - non-destructive testing KW - active thermography KW - historic facades KW - solar heating KW - optical methods PY - 2016 AN - OPUS4-36682 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Rothbart, Nick A1 - Hohlstein, F. A1 - Koch, J. A1 - Kryukov, I. A1 - Mahler, G. A1 - Stotter, B. A1 - Walle, G. A1 - Oswald-Tranta, B. A1 - Sengebusch, M. A1 - Goldammer, M. T1 - A round robin test on flash thermography N2 - A round robin test on flash thermography was organized within the scope of a standardization research project. This test gives information on reliability, comparability and efficiency of different testing situations. Data recorded on metal and CFRP test specimens with flat bottom holes (FBH) were analysed by evaluating the detectability and by calculating the signal-to-noise ratio (SNR) of the defect signatures as a function of defect parameters. For the investigation of the influence of material properties on the spatial resolution as well as on penetration depth, test specimens made of steel and copper with crossed notches and a notch ramp were constructed and investigated. Here, the minimum resolvable notch distance and the maximum detectable depth of the ramp were analysed. T2 - 19th World Conference on Non-destructive Testing (WCNDT) CY - Munich, Germany DA - 13.06.2016 KW - Active thermography KW - Flash excitation KW - Round robin test KW - Standardisation PY - 2016 AN - OPUS4-36684 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Myrach, Philipp A1 - Hennen, C. A1 - Meinhardt, J. A1 - Mecke, R. A1 - Schiller, M. A1 - Seidl, T. A1 - Kalisch, U. T1 - 3D Kartierung von Rissen in historischem Beton mit thermografischen, optischen und Ultraschall-Verfahren T2 - DGZfP-Jahrestagung 2014 T2 - DGZfP-Jahrestagung 2014 CY - Potsdam, Germany DA - 2014-05-26 PY - 2014 AN - OPUS4-30835 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Myrach, Philipp A1 - Mecke, R. A1 - Seidl, T. A1 - Schiller, M. A1 - Kalisch, U. T1 - 3D Kartierung von Schäden in historischen Bauwerken mit thermografischen, optischen und Ulrtaschall-Verfahren T2 - Arbeitskreis Stuttgart der DGZfP T2 - Arbeitskreis Stuttgart der DGZfP CY - Stuttgart DA - 2014-11-20 PY - 2014 AN - OPUS4-32081 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Myrach, Philipp A1 - Röllig, Mathias A1 - Steinfurth, Henrik T1 - Validation of active thermography techniques for the characterization of CFRP structures T2 - ECNDT 2014 T2 - ECNDT 2014 CY - Prag (Tschechien) DA - 2014-10-06 PY - 2014 AN - OPUS4-31983 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane T1 - Aktive Thermografie im Bauwesen T2 - VATh-Bauthermografie Seminar T2 - VATh-Bauthermografie Seminar CY - Berlin DA - 2014-10-11 PY - 2014 AN - OPUS4-31988 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane T1 - Einsatz der aktiven Thermografie in der Denkmalpflege T2 - Seminar Thermografie am Bau T2 - Seminar Thermografie am Bau CY - Berlin, Germany DA - 2009-04-28 PY - 2009 AN - OPUS4-19827 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane T1 - Einbindung der Thermografie in ein Gesamtkonzept zur Schadensdiagnose T2 - Seminar Thermografie am Bau T2 - Seminar Thermografie am Bau CY - Berlin, Germany DA - 2009-04-28 PY - 2009 AN - OPUS4-19828 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane T1 - Einbindung der aktiven Thermografie in ein Gesamtkonzept zur Schadensdiagnose (eingeladener Vortrag) T2 - VATh (Verband der angewandten Thermografie) Frühjahrs-Symposium 2009 T2 - VATh (Verband der angewandten Thermografie) Frühjahrs-Symposium 2009 CY - Weimar, Germany DA - 2009-05-09 PY - 2009 AN - OPUS4-19807 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane T1 - Prinzip der aktiven Thermografie im Bauwesen T2 - Seminar Thermografie am Bau, Deutsche Gesellschaft für zerstörungsfreie Prüfung T2 - Seminar Thermografie am Bau, Deutsche Gesellschaft für zerstörungsfreie Prüfung CY - Berlin, Germany DA - 2009-04-28 PY - 2009 AN - OPUS4-19809 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Röllig, Mathias T1 - Application of active thermography to the detection of safety relevant defects in civil engineering structures T2 - 11th International Conference on Infrared Sensors and Systems, SENSOR + TEST Conference 2009 T2 - 11th International Conference on Infrared Sensors and Systems, SENSOR + TEST Conference 2009 CY - Nuremberg, Germany DA - 2009-05-26 PY - 2009 AN - OPUS4-19810 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Harrer, Andrea A1 - Pulz, Robert A1 - Röllig, Mathias A1 - Rehmer, Birgit T1 - Untersuchung von Transport- und Schädigungsprozessen in Keramiken und mineralischen Baustoffen mit lokal und global angeregter aktiver Thermografie T2 - Sensoren und Messsysteme 2010, 15. ITG/GMA-Fachtagung T2 - Sensoren und Messsysteme 2010, 15. ITG/GMA-Fachtagung CY - Nuremberg, Germany DA - 2010-05-18 PY - 2010 AN - OPUS4-21919 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Steinfurth, Henrik A1 - Ziegler, Mathias A1 - Heck, S. J. A1 - Scheuerlein, C. T1 - Aktive Thermografie zur zerstörungsfreien Prüfung von Lötverbidungen T2 - DGZfP-Jahrestagung 2011 T2 - DGZfP-Jahrestagung 2011 CY - Bremen, Germany DA - 2011-05-30 PY - 2011 AN - OPUS4-23903 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Röllig, Mathias T1 - Entwicklung und Kombination optischer und thermografischer zerstörungsfreier Messverfahren zur Bewertung von Bauteiloberflächen und -grenzflächen T2 - DGZfP-Jahrestagung 2010 T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Germany DA - 2010-05-10 PY - 2010 AN - OPUS4-21758 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane T1 - Prinzipien der aktiven Thermografie im Bauwesen und Anwendung in der Denkmalpflege T2 - Seminar Thermografie am Bau, Deutsche Gesellschaft für Zerstörungsfreie Prüfung T2 - Seminar Thermografie am Bau, Deutsche Gesellschaft für Zerstörungsfreie Prüfung CY - Berlin, Germany DA - 2010-05-04 PY - 2010 AN - OPUS4-21749 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane T1 - Untersuchung von Schädigungsprozessen an Bauteiloberflächen und -grenzflächen mit Hilfe optischer und thermografischer zerstörungsfreier Prüfverfahren, Ergebnisse eines Projektes der Forschungsinitiative Zukunft Bau T2 - Seminar Thermografie am Bau, Deutsche Gesellschaft für Zerstörungsfreie Prüfung T2 - Seminar Thermografie am Bau, Deutsche Gesellschaft für Zerstörungsfreie Prüfung CY - Berlin, Germany DA - 2010-05-04 PY - 2010 AN - OPUS4-21750 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Röllig, Mathias A1 - Myrach, Philipp T1 - Aktive Thermografie zur Charakterisierung von Fertigungsfehlern und Schäden in Faserverbundwerkstoffen N2 - -Typische Prüfaufgaben -Vergleich Blitz- und Lock-in Thermografie -Vergleich der Nachweisempfindlichkeiten in CFK und GFK -Vergleich mit anderen ZFP-Verfahren -Vorteile und Grenzen aktiver Thermografieverfahren zur Prüfung von Faserverbundwerkstoffen T2 - Fachtagung Zerstörungsfreie Prüfverfahren in der Kunststoffindustrie des SKZ CY - Würzburg, Germany DA - 27.9.2016 KW - Aktive Thermografie KW - Blitz-Anregung KW - Lock-in-Anregung KW - CFK KW - GFK PY - 2016 AN - OPUS4-37556 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Rothbart, Nick A1 - Röllig, Mathias A1 - Sengebusch, M. A1 - Goldammer, M. A1 - Hohlstein, F. A1 - Koch, J. A1 - Kryukov, I. A1 - Mahler, G. A1 - Oswald-Tranta, B. A1 - Stotter, B. A1 - Walle, G. T1 - A round robin test of flash thermography of CFRP and metal structures T2 - NDT in Aerospace 2015 T2 - NDT in Aerospace 2015 CY - Bremen DA - 2015-11-16 PY - 2015 AN - OPUS4-34868 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane T1 - Zerstörungsfreie Schadensdiagnose am Beispiel der aktiven Thermografie (eingeladener Vortrag) T2 - Thermografie-Tag 2015, InfratEc T2 - Thermografie-Tag 2015, InfratEc CY - Berlin DA - 2015-06-11 PY - 2015 AN - OPUS4-33437 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane T1 - Aktive Thermografie mit optischen Anregungsquellen zur Charakterisierung dünner Schichten T2 - Handlungskonferenz Optische Analytik - Optische Analytik in der Dünnschichttechnologie T2 - Handlungskonferenz Optische Analytik - Optische Analytik in der Dünnschichttechnologie CY - Berlin DA - 2015-06-16 PY - 2015 AN - OPUS4-33465 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Reischel, Mercedes A1 - Krankenhagen, Rainer A1 - Myrach, Philipp A1 - Steinfurth, Henrik A1 - Röllig, Mathias T1 - Anwendungsbereiche und Grenzen der Blitzthermografie - Entwicklung eines anwendungsnahen Standards T2 - DACH Jahrestagung 2012 T2 - DACH Jahrestagung 2012 CY - Graz, Österreich DA - 2012-09-17 PY - 2012 AN - OPUS4-32798 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Augustin, Sven T1 - Inspection Techniques: Thermography T2 - Workshop des EMPR Projektes VITCEA: Validated Inspection for Composites in Energy Applications, http://projects.npl.co.uk/vitcea/news-events.html T2 - Workshop des EMPR Projektes VITCEA: Validated Inspection for Composites in Energy Applications, http://projects.npl.co.uk/vitcea/news-events.html CY - BAM Berlin DA - 2015-02-17 PY - 2015 AN - OPUS4-32799 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Ziegler, Mathias A1 - Krankenhagen, Rainer A1 - Myrach, Philipp A1 - Jonietz, Florian T1 - Application of active thermography in production processes T2 - InnoTesting 2015, Integrated Modelling and Testing in Global Enviroment T2 - InnoTesting 2015, Integrated Modelling and Testing in Global Enviroment CY - Wildau bei Berlin DA - 2015-02-19 PY - 2015 AN - OPUS4-32800 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane T1 - Aktive Thermografie im Bauwesen T2 - Thermografische Untersuchungen im Denkmalschutz, Veranstaltung der Deutsche Stiftung Denkmalschutz T2 - Thermografische Untersuchungen im Denkmalschutz, Veranstaltung der Deutsche Stiftung Denkmalschutz CY - Berlin DA - 2015-01-23 PY - 2015 AN - OPUS4-32801 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Steinfurth, Henrik A1 - Mecke, R. A1 - Schiller, M. A1 - Kernchen, A. A1 - Kalisch, U. A1 - Meinhardt, J. A1 - Hennen, C. A1 - Arnold, T. A1 - Groll, T. T1 - Erfassung und Bewertung von sicherheitsrelevanten Ablösungsprozessen bei Putzen und Fassadenelementen mit zerstörungsfreien Mess- und Prüfverfahren T2 - DGZfP DACH-Jahrestagung 2015 T2 - DGZfP DACH-Jahrestagung 2015 CY - Salzburg, Österreich DA - 2015-05-11 PY - 2015 AN - OPUS4-33270 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Ehrig, Karsten A1 - Meinel, Dietmar T1 - Validierung der aktiven Thermografie mittels CT zur Charakterisierung von Inhomogeneität und Fehlstellen in CFK T2 - DGZfP-DACH-Jahrestagung 2015 T2 - DGZfP-DACH-Jahrestagung 2015 CY - Salzburg, Österreich DA - 2015-05-11 PY - 2015 AN - OPUS4-33271 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Rothbart, Nick A1 - Goldammer, M. A1 - Hohlstein, F. A1 - Koch, J. A1 - Kryukov, I. A1 - Mahler, G. A1 - Stotter, B. A1 - Walle, G. A1 - Oswald-Tranta, B. A1 - Sengebusch, M. T1 - A round robin test of flash thermography – detectability and quantification of artificial and natural defects in CFRP and metal structures N2 - Within the scope of a DIN INS project, a flash thermography round robin test that evaluates reliability, comparability, and efficiency of different testing situations was organized. The results give information about the detectability of defects, e.g. depending on their size and depth, the evaluation methods and the materials used. Besides, the influences of equipment and parameters used by the participants on the results were analysed. All of the quantitative results as well as the feedback given by the participants will be presented in a DIN committee in order to contribute to a flash thermography standard. T2 - Conference QIRT 2016 CY - Gdansk, Poland DA - 04.07.2016 KW - Active thermography KW - Round robin test KW - CFRP KW - Metal KW - Flash excitation PY - 2016 AN - OPUS4-37511 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Röllig, Mathias A1 - Heckel, Thomas A1 - Brackrock, Daniel A1 - Gaal, Mate T1 - Quantification of impact damages in CFRP and GFRP structures with thermography and ultrasonics N2 - For the quantification of impact damage in CFRP and GFRP structures, first passive thermography measurements have been performed at the front and rear side of the test specimens during low velocity impact load. After loading, the damaged structures have been investigated non-destructively with active thermography with flash excitation and with step heating and with two different ultrasonic methods (phased array and air coupled ultrasonics). The damage sizes quantified with all methods are evaluated and compared. In addition, the depth of the greatest damage inside the different test specimens is analysed. T2 - QIRT Conference 2018 CY - Berlin, Germany DA - 25.06.2018 KW - Thermography KW - Ultrasonics KW - CFRP KW - GFRP KW - Impact PY - 2018 AN - OPUS4-45458 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Röllig, Mathias A1 - Heckel, Thomas A1 - Brackrock, Daniel A1 - Gaal, Mate T1 - Charakterisierung von Impactschäden während und nach dem Impact mit thermografischen Verfahren und mit Ultraschall N2 - Der Umfang der durch Impacts in Faserverbundmaterialien erzeugten Schäden ist abhängig von der Energie des Impacts, von der Zusammensetzung und dem Aufbau der Faserverbundwerkstoffe und von der Geometrie der Bauteile und hier im Wesentlichen von der Dicke des Bauteils. Der zerstörungsfreie Nachweis dieser Schädigungen kann sowohl mit Ultraschallverfahren als auch mit Verfahren der aktiven Thermografie erfolgen. Ein Vergleich der Nachweisempfindlichkeiten dieser Verfahren für die unterschiedlichen Schädigungen wird in diesem Beitrag in Abhängigkeit vom verwendeten Faserverbundwerkstoff (CFK und GFK), der Dicke des Materials und von der Impactenergie durchgeführt. Ergänzt werden die im Anschluss an die Schädigung eingesetzten ZfP-Verfahren mit zeitlich hochaufgelösten Thermografiemessungen, die bereits während des Impacts aufgenommen wurden. T2 - DGZfP Jahrestagung 2018 CY - Leipzig, Germany DA - 07.05.2018 KW - Thermografie KW - Ultraschall KW - Faserverbundwerkstoffe KW - Impactschäden PY - 2018 AN - OPUS4-44878 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Richter, Regina A1 - Götschel, S. A1 - Weiser, M. T1 - Determination of wall thickness and defect parameters of metallic and non-metallic structures using active thermography T2 - AIP Applied Inverse Problems T2 - AIP Applied Inverse Problems CY - Helsinki, Finnland DA - 2015-05-25 PY - 2015 AN - OPUS4-33360 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Mecke, R. A1 - Kalisch, U. A1 - Groll, T. A1 - Arnold, T. T1 - 3D-Kartierung von Schäden in historischen Bauwerken mit thermografischen, optischen und Ultraschall-Verfahren T2 - 128. Sitzung des DGZfP-Arbeitskreises Zwickau-Chemnitz T2 - 128. Sitzung des DGZfP-Arbeitskreises Zwickau-Chemnitz CY - Stuttgart, Germany DA - 2015-10-06 PY - 2015 AN - OPUS4-34416 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Rothbart, Nick A1 - Röllig, Mathias A1 - Sengebusch, M. A1 - Goldammer, M. A1 - Hohlstein, F. A1 - Koch, J. A1 - Kryukov, I. A1 - Mahler, G. A1 - Oswald-Tranta, B. A1 - Stotter, B. T1 - Ringversuch zur Blitzthermografie T2 - Thermografie-Kolloquium 2015 T2 - Thermografie-Kolloquium 2015 CY - Stuttgart, Germany DA - 2015-10-01 PY - 2015 AN - OPUS4-34417 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Müller, Jan A1 - Götschel, S. A1 - Weiser, M. T1 - 3D Rekonstruktionsverfahren für die aktive Thermografie N2 - Aktive Thermografie wird zunehmend für die zerstörungsfreie Prüfung insbesondere von dünnwandigen Bauteilen eingesetzt. Neben der Ortung und der Bestimmung der lateralen Ausdehnung von Fehlstellen und Inhomogenität in der Ebene parallel zur Oberfläche sind in den Messdaten auch Informationen über die Tiefe bzw. Überdeckung von Fehlstellen enthalten. In der Vergangenheit wurden verschiedene analytische Ansätze zur Rekonstruktion dieser Tiefeninformationen umgesetzt: - Bestimmung der Blindfrequenz über die Phaseninformationen der Puls-Phasen-Thermografie - Bestimmung des Phasenkontrastes bei der Lockin Thermografie - Bestimmung der Fehlstellentiefe mittels Thermal Signal Reconstruction (TSR), d. h. aus dem doppeltlogarithmisch dargestellten zeitlichen Verlauf der Abkühlung nach impulsartiger Erwärmung Nachteil aller bisherigen analytischer Verfahren basierend auf eindimensionalen Modellen ist, dass der Einfluss lateraler Wärmeleitungseffekte nicht berücksichtigt wird. Dieser kann jedoch bei kleineren Fehlstellen nicht mehr vernachlässigt werden, wozu bisher jedoch nur teilempirische Ansätze realisiert wurden. Erst numerische Rekonstruktionsverfahren ermöglichen eine Rekonstruktion auch komplexerer Defektgeometrien unter Berücksichtigung lateraler Wärmeleitungsprozesse sowie anisotroper thermischer Materialeigenschaften. In diesem B eitrag werden die verschiedenen Ansätze in der 3D-Datenanalyse der aktiven Thermografie miteinander verglichen und die Möglichkeiten und Grenzen der Verfahren vorgestellt. T2 - Heidelberger Bildverarbeitungsfortum 2017 CY - Fürth, Germany DA - 07.03.2017 KW - Aktive Thermografie KW - 3D Rekonstruktion KW - Faserverbundwerkstoffe KW - Analytische Modelle KW - Numerische Modelle PY - 2017 AN - OPUS4-39301 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Heckel, Thomas T1 - Validated inspection techniques for composites in energy applications - The EMRP-project VITCEA N2 - Presentation of results of the EMRP-Project VITCEA T2 - 29. Sitzung des DIN NMP NA 062-08-20 AA „Zerstörungsfreie Prüfung, Obleuteausschuss“ CY - Berlin, Germany DA - 21.02.2017 KW - Fibre reinforced composites KW - Active thermography KW - Ultrasonics PY - 2017 AN - OPUS4-39303 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Röllig, Mathias A1 - Hosseini, Seyed A1 - Heckel, Thomas A1 - Gaal, Mate A1 - Schadow, Florian A1 - Brackrock, Daniel A1 - Gower, M. A1 - Lodeiro, M. A1 - Baker, G. T1 - Quantitative Bewertung künstlicher und natürlicher Fehler in Faserverbundwerkstoffen mit aktiver Thermografie und Ultraschall N2 - Im EMRP-Projekt VITCEA werden komplementäre ZFP-Verfahren zur Prüfung von Faserverbundwerkstoffen weiterentwickelt und validiert. In diesem Beitrag werden Ergebnisse verschiedener Techniken der aktiven Thermografie und des Ultraschalls vorgestellt. Die Nachweisempfindlichkeiten bezüglich künstlicher und natürlicher Fehler mit unterschiedlichen lateralen Ausdehnungen und in verschiedenen Tiefen werden miteinander verglichen. T2 - DGZfP Jahrestagung 2017 CY - Koblenz, Germany DA - 22.05.2017 KW - CFK KW - GFK KW - Aktive Thermografie KW - Phased Array Ultraschall KW - Luftultraschall PY - 2017 AN - OPUS4-41089 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Gower, M. A1 - Lodeiro, L. A1 - Baker, G. A1 - Aktas, A. A1 - Shaw, R. T1 - Introduction into the EMRP-Project VITCEA N2 - Defects in FRP structures may be introduced during the processing and fabrication of composite components and can initiate or grow in-service. In the context of this JRP, the term ‚defect‘ refers to imperfections introduced during manufacture/processing and/or secondary machining operations, as well as damage sustained during a component‘s service life. One of the challenges facing accurate and repeatable defect detection in FRP composites is the multitude of defect types that exist, each with characteristics that present different challenges to the NDE practitioner. In order for a particular NDE technique to achieve broad acceptance by industry, it is desirable for the technique to be able to detect a range of defect types with a high level of confidence. Project VITCEA (Validated Inspection Techniques for Composites in Energy Applications) is developing and validating traceable procedures for novel NDE techniques with contrasting detection capabilities, which will underpin the increased use of FRP composites for improved efficiency and reliability in energy related applications e.g. wind and marine turbine blades, nacelles, oil and gas flexible risers. T2 - Training Course Ultrasonics and Active Thermography CY - Berlin, Germany DA - 28.03.2017 KW - CFRP KW - GFRP KW - Active thermography KW - Ultrasonics KW - Microwaves KW - Shearography PY - 2017 AN - OPUS4-41091 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Myrach, Philipp A1 - Unnikrishnakurup, Sreedhar T1 - Theory and data anaylsis of pulse and lock-in thermography N2 - CFRP and GFRP test specimens have been investigated with pulse and lock-in thermography. Both methods are compared quantitatively. T2 - Training Course Ultrasonics and Active Thermography CY - Berlin, Germany DA - 28.03.2017 KW - CFRP KW - GFRP KW - Active thermography KW - Flash excitation KW - Lock-in excitation PY - 2017 AN - OPUS4-41092 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Röllig, Lodeiro A1 - Krankenhagen, Rainer A1 - Unnikrishnakurup, Sreedhar A1 - Gower, M. A1 - Lodeiro, M. A1 - Baker, G. A1 - Monte, C. A1 - Adibekyan, A. A1 - Gutschwager, B. T1 - Evaluation of different techniques of active thermography for quantification of artificial and natural defects in fiber reinforced composites N2 - For assuring the safety and reliability of components and constructions in energy applications made of fiber reinforced polymers (e. g. blades of wind turbines and tidal power plants, engine chassis, flexible oil and gas pipelines) innovative non-destructive testing methods are required. Within the EMRP project VITCEA complementary methods (shearography, microwave, ultrasonics and thermography) are further developed and validated. Together with partners from the industry, test specimens were constructed and selected on-site containing different artificial and natural defect artefacts. As base materials, carbon and glass fibers in different orientations and layering embedded in different matrix materials (epoxy, polyamide) were considered. In this contribution, the validation of different techniques of active thermography like flash, step heating and lock-in thermography to these testing problems is presented. Experimental data are compared to analytical and numerical models. Among others shows that although flash and lock-in thermography have the same detectability of flat bottom holes in the phase images, the detectability of delaminations is different. In another example, it is demonstrated that for GFRP, the transmissivity of the material has to be considered for the quantitative data analysis. T2 - 19th International Conference on Photoacoustic and Photothermal Phenomena - ICPPP 2017 CY - Bilbao, Spain DA - 16.07.2017 KW - CFRP KW - GFRP KW - Active thermography KW - Flash excitation KW - Lock-in excitation PY - 2017 AN - OPUS4-41103 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Röllig, Mathias A1 - Unnikrishnakurup, Sreedhar A1 - Monte, C. A1 - Adibekyan, A. A1 - Gutschwager, B. A1 - Knazowicka, L. A1 - Blahut, A. A1 - Gower, M. A1 - Lodeiro, M. A1 - Baker, G. A1 - Aktas, A. T1 - Einfluss thermischer und optischer Materialeigenschaften auf die Charakterisierung von Fehlstellen in Faserverbundwerkstoffen mit aktiven Thermografieverfahren N2 - In diesem Beitrag werden zerstörungsfreie Untersuchungen mittels aktiver Thermografie an Probekörpern aus CFK und GFK mit unterschiedlichen künstlichen Fehlstellen vorgestellt. Dabei wird die zeitliche und örtliche Temperaturverteilung nach Erwärmung mit Blitzlampen oder mit einem Infrarot-Strahler mit einer Infrarot-Kamera erfasst. Zur Rekonstruktion der Messdaten wurde ein numerisches Modell entwickelt. Dazu war die Bestimmung der thermischen und optischen Materialeigenschaften erforderlich. T2 - Temperatur 2017 CY - Berlin, Germany DA - 17.05.2017 KW - CFK KW - GFK KW - Aktive Thermografie KW - Numerische Simulation KW - Emissivität PY - 2017 AN - OPUS4-41087 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Rothbart, N. T1 - A multi-parameter probability of detection (POD) model for flash thermography N2 - In most cases where a POD is calculated based on continuous data obtained by active thermography, the signal-to-noise ratio (SNR) of the signal, the difference of the defect signal to the background or the absolute signal is analyzed as a function of the aspect ratio (ratio of the size of a defect to its overage), although a distinct linear relationship on a linear or logarithmic scale could not be satisfactorily shown and is also not expected. Therefore, a multi-parameter probability of detection (POD) model was developed, where an â versus a continuous signal analysis was based on the linear relationship between the SNR and a multi-parameter a. This POD model is based on data which were recorded within a flash thermography round robin test with nine participants. Metal test specimens with flat bottom holes (FBHs) were analyzed by calculating the SNR of the defect signatures in the thermograms as well as in the phase images as a function of defect parameters. The linear relationship of the experimental data to the multi-parameter a was verified by comparison to data obtained from an analytical model that is considering lateral thermal heat diffusion as well as to data obtained by numerical simulation. The resulting POD curves for the thermograms and phase images give an estimation for the detectability of the FBHs with known geometry in steel using different equipment and obtained by different participants. By comparing the SNRs of FBHs with similar geometries, this POD model was transferred to aluminum and copper as well. T2 - 7th European-American Workshop on Reliability of NDT CY - Potsdam, Germany DA - 05.09.2017 KW - NDT KW - Active thermography KW - POD model KW - Standardization PY - 2017 AN - OPUS4-41882 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Röllig, Mathias A1 - Rehmer, Birgit A1 - Riemer, Sven A1 - Gower, M. A1 - Baker, G. A1 - Lodeiro, M. A1 - Knazovicka, L. A1 - Blahut, A. A1 - Monte, C. A1 - Adibekyan, A. A1 - Gutschwager, B. T1 - Characterisation of artificial and natural defects in fibre reinforced plastics designed for energy applications using active thermography - EMRP VITCEA N2 - Amongst various other NDT methods, within the EMRP-project ‘VITCEA’ active thermography is validated for testing of CFRP and GFRP structures constructed for energy application. In this contribution, the optical and thermal properties of CFRP and GFRP reference defect artefact (RDA) and natural defects artefact (NDA) test specimens are characterized. Different excitation techniques and techniques for data analysis are compared for optimizing the number of detected defects. T2 - 19th World Conference on Non-destructive Testing (WCNDT) CY - Munich, Germany DA - 13.06.2016 KW - Active thermography KW - CFRP KW - GFRP KW - Artificial and natural defects KW - Emissivity PY - 2016 AN - OPUS4-36700 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Röllig, Mathias A1 - Rehmer, Birgit A1 - Gower, M. A1 - Baker, G. A1 - Lodeiro, M. A1 - Aktas, A. A1 - Knaszovicka, L. A1 - Blahut, A. A1 - Monte, C. A1 - Adibekyan, A. A1 - Gutschwager, B. T1 - Characterisation of artificial defects in CFRP and GFRP sheets designed for energy applications using active thermography N2 - The increased use of fibre-reinforced plastic (FRP) composites for improved efficiency and reliability in energy related applications e.g. wind and marine turbine blades, nacelles, oil and gas flexible risers, also increases the demand for innovative non-destructive testing technologies. Thus, in order to achieve increased acceptance of suited and optimized non-destructive testing (NDT) methods in industry, the European Metrology Research Programme (EMRP) project ENG57 Validated Inspection Techniques for Composites in Energy Applications (VITCEA) deals with the development and validation of innovative NDT technologies. In this contribution, results concerning thermographic investigations at test specimens during tensile loading and active thermography testing after tensile loading are presented. Additionally, the determination of the optical properties (relative transmittance and directional spectral emissivity) of CFRP and GFRP test specimens is described. T2 - Conference QIRT 2016 CY - Gdansk, Poland DA - 04.06.2016 KW - Active themrography KW - GFRP KW - CFRP KW - Validation of methods PY - 2016 AN - OPUS4-37513 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Altenburg, Simon A1 - Scheuschner, Nils T1 - Prozessüberwachung in der additiven Fertigung von Metallen - das Projekt ProMoAM N2 - Prozessüberwachung in der additiven Fertigung von Metallen - das Projekt ProMoAM. In diesem Vortrag wird das gesamte Projekt vorgestellt. Dabei wird auf die Thermografie im LMD und L-PBF Prozess näher eingegangen. Hierbei werden sowohl stationäre als auch mit bewegte Systeme vorgestellt. T2 - Webinar: Inline-Messtechnik und –Prozessüberwachung CY - Online meeting DA - 01.07.2020 KW - Pulverbettverfahren KW - Laser Metal Deposition KW - Thermografie KW - Optische Tomografie PY - 2020 UR - https://quality-engineering.industrie.de/webinarreihe-additive-verfahren/#Inline-Messtechnik AN - OPUS4-50962 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Scheuschner, Nils A1 - Altenburg, Simon T1 - Summary of in-situ monitoring in additive manufacturing - ProMoAM N2 - The quality of additively manufactured components is significantly influenced by the process parameters used during production. Thus, sensors and measuring systems are already commercially available for process monitoring, at least in metal-based additive manufacturing. However, it is not yet possible to detect defects and inhomogeneities directly or indirectly during the building process. The aim of the project ProMoAM is to develop spectroscopic and non-destructive testing methods for the in-situ evaluation of the quality of additively manufactured metal components in laser- or arc-based AM processes. In addition to passive and active methods of thermography, this includes optical tomography, optical emission spectroscopy, eddy current testing, laminography (radiography), X-ray backscattering, particle emission spectroscopy and photoacoustic methods. T2 - 2nd Workshop on In-situ Monitoring and Microstructure Development in Additive Manufactured Alloys CY - Online meeting DA - 19.04.2021 KW - In-situ monitoring KW - Additive manufacturing KW - Metals KW - Thermography PY - 2021 AN - OPUS4-52539 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Altenburg, Simon A1 - Röllig, Mathias A1 - Myrach, Philipp T1 - Passive and active thermography applied to buildings and cultural heritage - Cracks and protection layers N2 - Artificial and natural cracks have been investigated with active and passive thermography. For the determination of the thickness of protection layers on concrete, an active thermography method has been developed. T2 - Short Courses of the QIRT 2018 Conference CY - Berlin, Germany DA - 25.6.2018 KW - Active themrography KW - Passive thermography KW - Cracks KW - Concrete PY - 2018 AN - OPUS4-45456 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Hamann, M. A1 - Hennen, Ch. T1 - Strukturuntersuchungen an historischem Mauerwerk mit zerstörungsfreien Prüfverfahren. Fallstudien des EU-Projektes ONSITEFORMASONRY: Altes Museum Berlin und Wartburg T2 - Rescon, Studientage für Konservierung und Restaurierung T2 - Rescon, Studientage für Konservierung und Restaurierung CY - Erfurt, Germany DA - 2004-06-25 PY - 2004 AN - OPUS4-4810 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Thiel, Erik A1 - Altenburg, Simon A1 - Mohr, Gunther A1 - Thiede, Tobias A1 - Mishurova, Tatiana A1 - Paul, Andrea A1 - Kranzmann, Axel A1 - Hilgenberg, Kai A1 - Pittner, Andreas A1 - Bruno, Giovanni A1 - Sommer, Konstantin A1 - Gumenyuk, Andrey T1 - Quality control in additive manufacturing via in-situ monitoring and non-destructive testing N2 - More than 80 representatives of SMEs, industrial companies and research institutes met on September 12 at the workshop "Challenges in Additive Manufacturing: Innovative Materials and Quality Control" at BAM in Adlershof to discuss the latest developments in materials and quality control in additive manufacturing. In special lectures, researchers, users and equipment manufacturers reported on the latest and future developments in additive manufacturing. Furthermore, funding opportunities for projects between SMEs and research institutions on a national and European level were presented. T2 - Challenges in Additive Manufacturing: Innovative Materials and Quality Control CY - Berlin, Germany DA - 12.09.2018 KW - Additive manufacturing KW - Quality control KW - Non-destructive testing KW - In-situ monitoring PY - 2018 AN - OPUS4-46072 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -