TY - GEN A1 - Dittrich, Matthias T1 - Endlagerbehälter und deren Qualifizierung N2 - Vorlesung zum Thema Qualifizierung von Endlagerbehältern für das Endlager Konrad. Grundlagen der Bauartprüfung. T2 - Modul 6 – Konditionierung, Entsorgung und Endlagerung radioaktiver Abfälle KW - Endlager Konrad KW - Bauartprüfung KW - Endlagerbehälter PY - 2017 SP - Kap. 18, 1 EP - 60 PB - AiNT CY - Aachen AN - OPUS4-42350 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dittrich, Matthias A1 - Kasparek, Eva-Maria A1 - Völzke, Holger T1 - Legacy waste containers for low and intermediate level radioactive waste in Germany - Actual situation and challenges –17070 N2 - Low and intermediate level radio active waste has been produced in Germany for several decades. While a part of the waste had been deposited in the Morleben repository and the Asse mine which have been operated for just a limited period of time, the major amount is conditioned and packaged in temporarily stored waste containers. Those containers are designated for final disposal in the KONRAD repository being currently under construction and expected to start operation in 2022. As a consequence, an assessment of the waste container documentation and safety is strongly needed to receive an approval for the KONRAD repository. This requalification is challenging because those old containers have to meet the same safety requirements as new containers. T2 - WasteManagement Symposia 2017 CY - Phoenix, USA DA - 05.03.2017 KW - Radioactive waste container KW - Konrad KW - Repository PY - 2017 UR - https://www.xcdsystem.com/wmsym/2017/028.html#17070 SP - Paper 17070, 1 EP - 14 AN - OPUS4-40326 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dittrich, Matthias A1 - Kasparek, Eva-Maria T1 - Federal approval of legacy waste containers for the Konrad repository - strategies and challenges N2 - The approval of an increasing number of legacy waste containers for the Konrad re-pository is expected in the next years. While well documented young legacy waste containers can rather easily be approved, the assessment is challenging for contain-ers which were manufactured some decades ago. All parties have to work closely together to find a specifically fitted strategy for such approvals. Thereby, rework of documents and requalification can be a promising approach. Details about three basic strategies have been shown to give a hint which options are available. T2 - 47th Annual Meeting on Nuclear Technology (AMNT 2016) CY - Hamburg, Germany DA - 10.05.2016 KW - Radioactive waste container KW - Konrad PY - 2016 SN - 978-3-926956-97-2 SP - 1 EP - 7 AN - OPUS4-39888 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dittrich, Matthias T1 - Federal approval of legacy waste containers for the Konrad repository - strategies and challenges N2 - The approval of an increasing number of legacy waste containers for the Konrad re-pository is expected in the next years. While well documented young legacy waste containers can rather easily be approved, the assessment is challenging for contain-ers which were manufactured some decades ago. All parties have to work closely together to find a specifically fitted strategy for such approvals. Thereby, rework of documents and requalification can be a promising approach. Details about three basic strategies have been shown to give a hint which options are available. T2 - 47th Annual Meeting on Nuclear Technology (AMNT 2016) CY - Hamburg, Germany DA - 10.05.2016 KW - Radioactive waste container KW - Konrad PY - 2016 AN - OPUS4-39890 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dittrich, Matthias T1 - Legacy waste containers for low and intermediate level radioactive waste in Germany – current situation and challenges N2 - Low and intermediate level radioactive waste has been produced in Germany for several decades. While a part of the waste had been deposited in the Morleben repository and the Asse mine which have been operated for just a limited period of time, the major amount is conditioned and packaged in temporarily stored waste containers. Those containers are designated for final disposal in the KON-RAD repository being currently under construction and expected to start opera-tion in 2022. As a consequence, an assessment of the waste container documen-tation and safety is strongly needed to receive an approval for the Konrad reposi-tory. This requalification is challenging because those old containers have to meet the same safety requirements as new containers. T2 - Waste Management Symposia 2017 CY - Phoenix, USA DA - 05.03.2017 KW - Legacy waste container KW - Konrad PY - 2017 AN - OPUS4-39872 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dittrich, Matthias T1 - Präzisierung der Prüfanforderungen an Stahlblechcontainer für das Endlager Konrad N2 - Abfallgebinde, die im Endlager Konrad eingelagert werden sollen, müssen die Anforderungen und Kriterien erfüllen, die in den Endlagerungsbedingungen (SE-IB-29/08-Rev-1) und in der Produktkontrolle (SE-IB-30/08-Rev-1) festgelegt sind. Die Qualifizierung der Abfallbehälter erfolgt auf dieser Grundlage in Form von Bauartprüfungen, die von der Bundesanstalt für Materialforschung und -prüfung (BAM) im Auftrag des Bundesamtes für Strahlen-schutz (BfS) durchgeführt werden. Darüber hinaus sind die im Hinblick auf Behälterbauartprüfungen relevanten Nebenbestimmungen aus dem Planfeststellungsbeschluss für das Endlager Konrad zu berücksichtigen. Zur besseren Anwendbarkeit werden diese Nebenbestimmungen in die Endlagerungsbedingungen und die Pro-duktkontrolle eingearbeitet. Begleitend ist als Hilfestellung für die Abfallablieferer und Behälterhersteller ein Leit-faden geplant, der praktikable Nachweisstrategien aufzeigt und, soweit erforderlich, Hintergrundinformationen zu den Spezifikationen der Regelwerke liefert. Die BAM ist vom BfS beauftragt, hierfür Vorschläge zu entwickeln und Empfehlungen abzugeben. T2 - KONTEC 2015 - 12. Internationales Symposium "Konditionierung radioaktiver Betriebs- und Stilllegungsabfälle" CY - Dresden, Germany DA - 2015-03-25 KW - ISO 1496-1 KW - Endlager Konrad PY - 2015 AN - OPUS4-39869 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dittrich, Matthias A1 - Meixner, Matthias A1 - Schumacher, Gerhard T1 - Texture formation in amorphous Al86Ni6Y4.5La1.5Co2 splats by thermal and mechanical treatment N2 - The crystallization behavior of amorphous Al86Ni6Y4.5La1.5Co2 splats was analyzed by differential scanning calorimetry (DSC) and X-ray diffraction (XRD). Rietveld refinement was used to analyze the preferred orientation of fcc aluminum nanocrystals in the residual amorphous matrix after annealing. Fiber textures in [200] and [220] directions were found after heating to 360 C. The influence of cold rolling on the preferred crystal orientation was studied as a function of the thickness reduction of the specimen. It was found that cold rolling significantly increases the (220) texture, while the (200) texture remains unchanged. Based on the experimental results the formation of (220) and (200) texture during the crystallization of the amorphous splats was ascribed to two different processes, internal stresses induced during splat formation or cold-rolling. KW - Aluminum alloy KW - Metallic glass KW - Al-TM-RE KW - Crystallization KW - Cold rolling KW - Texture PY - 2016 DO - https://doi.org/10.1016/j.intermet.2016.04.008 SN - 0966-9795 SN - 1879-0216 VL - 74 SP - 46 EP - 52 PB - ELSEVIER AN - OPUS4-39268 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dittrich, Matthias T1 - Evolution of Microstructure of a Partly Amorphous AI87Ni8La5 Alloy during Severe Plastic Deformation by High Energy Ball Milling T2 - 22nd International Symposium on Metastable, Amorphous and Nanostructured Materials CY - Paris, France DA - 2015-07-13 PY - 2015 AN - OPUS4-33754 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dittrich, Matthias A1 - Kasparek, Eva Maria A1 - Völzke, Holger T1 - Präzisierung der Prüfanforderungen an Stahlblechcontainer für das Endlager Konrad N2 - Abfallgebinde, die im Endlager Konrad eingelagert werden sollen, müssen die Anforderungen und Kriterien erfüllen, die in den Endlagerungsbedingungen (SE-IB-29/08-Rev-1 [1]) und in der Produktkontrolle (SE-IB-30/08-Rev-1) festgelegt sind. Die Qualifizierung der Abfallbehälter erfolgt auf dieser Grundlage in Form von Bauartprüfungen, die von der Bundesanstalt für Materialforschung und -prüfung (BAM) im Auftrag des Bundesamtes für Strahlenschutz (BfS) durchgeführt werden. Darüber hinaus sind die im Hinblick auf Behälterbauartprüfungen relevanten Nebenbestimmungen aus dem Planfeststellungsbeschluss für das Endlager Konrad zu berücksichtigen. Zur besseren Anwendbarkeit werden diese Nebenbestimmungen in die Endlagerungsbedingungen und die Produktkontrolle eingearbeitet. Begleitend ist als Hilfestellung für die Abfallablieferer und Behälterhersteller ein Leitfaden geplant, der praktikable Nachweisstrategien aufzeigt und, soweit erforderlich, Hintergrundinformationen zu den Spezifikationen der Regelwerke liefert. Die BAM ist vom BfS beauftragt, hierfür Vorschläge zu entwickeln und Empfehlungen abzugeben. T2 - KONTEC 2015 - 12. Internationales Symposium "Konditionierung radioaktiver Betriebs- und Stilllegungsabfälle" CY - Dresden, Germany DA - 25.03.2015 PY - 2015 SP - Paper 090, 786 EP - 794 AN - OPUS4-33020 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dittrich, Matthias T1 - Evolution of crystallite size, lattice parameter and internal strain in Al precipitates during high energy ball milling of partly amorphous Al87Ni8La5 alloy T2 - 79. Jahrestagung der DPG und DPG-Frühjahrstagung CY - Berlin, Germany DA - 2015-03-15 PY - 2015 AN - OPUS4-32923 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -