TY - JOUR A1 - Klaffke, Dieter T1 - On the influence of some test parameters on the results of oscillating sliding tests JF - TriboTest N2 - The friction and wear behaviour of materials is often characterised in laboratory tests using a simple ball-on-flat configuration. From this type of test can be derived information useful in guiding the development of tribomaterials and in helping select candidate materials for specific applications. A large variety of tribotesting methods exists, and indeed several are not yet standardised. One of these methods is the oscillating sliding test, where a ball moves in relation to a disc, usually with small strokes. This method is almost non-destructive and can be applied to very small specimens. One of the most important parameters in laboratory tests is the humidity of the surrounding air. Experimental results on the friction and wear characteristics of different ceramics tested against different ball materials at room temperature in oscillating sliding contact are presented here and discussed, taking into account the effects of the test duration, relative humidity, and counterbody material. KW - Oscillating Sliding KW - Reibung KW - Verschleiß KW - Counterbody material KW - Ceramics KW - Testdauer KW - Feuchte PY - 1999 DO - https://doi.org/10.1002/tt.3020060104 SN - 1354-4063 SN - 1557-685X VL - 6-1 SP - 29 EP - 49 PB - Coppin CY - Deal AN - OPUS4-716 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Woydt, Mathias A1 - Skopp, André A1 - Dörfel, Ilona A1 - Witke, Klaus T1 - Wear Engineering Oxides / Antiwear Oxides JF - Tribology transactions KW - Oxid KW - Hochtemperatur KW - Keramik KW - Reibung PY - 1999 SN - 1040-2004 SN - 1547-397X IS - 42,1 SP - 21 EP - 31 PB - Taylor & Francis CY - Philadelphia, Pa. AN - OPUS4-711 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Klaffke, Dieter T1 - Reibung und Verschleiß untersuchen - Prüftechnische Aspekte beim Schwingungsverschleiß JF - Materialprüfung = Materials testing KW - Reibung KW - Verschleiss KW - Schwingungsverschleiss PY - 1996 SN - 0025-5300 VL - 38 IS - 1-2 SP - 30 EP - 34 PB - Carl Hanser Verlag CY - München AN - OPUS4-660 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Klaffke, Dieter T1 - On the repeatibibliy of friction and wear results and on the influence of humidity in oscillating sliding tests of steel - steel pairings JF - Wear KW - Reibung KW - Verschleiss KW - Reproduzierbarkeit PY - 1995 SN - 0043-1648 VL - 189 SP - 117 EP - 121 PB - Elsevier CY - Amsterdam AN - OPUS4-597 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -