TY - CONF A1 - Urbanczyk, M. A1 - Bollmann, U.E. A1 - Borho, N. A1 - Schoknecht, Ute A1 - Bester, K. T1 - Influence of pigments on phototransformation rates of biocides in paints N2 - Biocides are commonly applied to building materials such as renders and paints in order to protect them from microbial spoilage. Since the building materials are commonly exposed to weathering conditions, biocides incorporated within the material matrices tend to leach out during the rain events. Moreover, photodegradation processes play an important role in the fate of biocides, due to the exposure to natural sunlight. Leaching of biocides and their moderate persistence, indicate that photodegradation products of biocides can also be found as environmental contaminants in runoff waters. In this study we investigated the photodegradation of four commonly used biocides (carbendazim, diuron, octylisothiazolinone and terbutryn) in four different paint formulations with selected pigments (red, white, black and one artificial, not commercial pigment-free formulation for comparison). As pigments interact with the spectrum of the incoming light, the effect of pigments on photodegradation rates was assumed to be relevant. Samples were prepared by painting 2 layers of selected paints on glass plates. The dry paint samples were exposed to UV light for designated time periods ranging from 0 h to 1056 h of total exposure time in a commercial UV-Test® Fluorescent / UV Instrument (Atlas Material Testing Technology, Illinois, USA). The applied energy was 1.2 W/m2. The black panel temperature was established at 40 ºC. The radiant energy from the UV fluorescent lamps was concentrated in the wavelength region at 351 nm and below. All samples were prepared in triplicates. After irradiation, paint samples were removed from glass carriers and extracted with methanol. The remaining biocide concentrations as well as the amounts of photodegradation products were analysed with the use of liquid chromatography coupled to mass spectrometry. The transparent, pigment-free formulation was the most vulnerable to light exposure, a visible colour change from white to yellow was observed after 1056 h of irradiation. Diuron, octylisothiazolinone and terbutryn degraded from pigment-free formulation following first-order degradation kinetics. A decrease of carbendazim was also observed. The remaining formulations showed similar degradation patterns for all analysed biocides. All paints showed degradation for octylisothiazolinone with 3-octyl-2(3H)-thiazolone being the main product for red, white and black pigment paint. N-octylacetamide and N-octyloxamic acid were dominant in the pigment-free formulation. Terbutryn sulfoxide was the main degradation product of terbutryn in case of the white paint, while other pigments showed higher concentrations of desbuthyl-2-hydroxy-terbutryn and desethyl-2-hydroxy-terbutryn. A determination of photodegradation in terms of pigment type, measured light spectra and intensity as outlined in this study, could provide a basis for establishing a quantitative description of the fate of biocides in paints, which has significance not only in terms of environmental science, but also could provide a guideline for developing new and effective products. T2 - 16th International conference on chemistry and the environment CY - Oslo, Norway DA - 18.06.2017 KW - Biocide KW - Photodegradation KW - Pigment PY - 2017 AN - OPUS4-40770 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Simon, Franz-Georg A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Trubiroha, Peter T1 - Materials and the Environment T2 - Springer handbook of materials measurement methods KW - Ecoefficiency KW - Weathering exposure KW - Photodegradation KW - Polymers PY - 2006 SN - 978-3-540-20785-6 IS - Part D / 15.1 SP - 789 EP - 803 PB - Springer CY - Berlin AN - OPUS4-13733 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schneider, Rudolf A1 - Fernandez, L. A1 - Borzecka, W. A1 - Lin, Z. A1 - Huvaere, K. A1 - Esteves, V. I. A1 - Cunha, A. A1 - Tome, J. P. C. T1 - Nanomagnet-photosensitizer hybrid materials for the degradation of 17 beta-estradiol in batch and flow modes JF - Dyes and Pigments N2 - The preparation of porphyrins and phthalocyanines covalently attached onto nanostructured magnetic supports consisting of magnetite nanoparticles coated with an amorphous silica shell is reported. The easy recovery of these heterogeneous photocatalysts, just by applying an external magnetic field, allows their reuse in multiple treatment cycles. The photocatalytic activity of the non-immobilized photosensitizers and the obtained hybrid materials was evaluated in the degradation of 17 beta-estradiol, as a model organic pollutant present in water, using batch and flow mode treatment systems, assisted by visible light radiation (4 mW cm(-2)). The flow mode system potentiated the photocatalytic capacity of these novel hybrid materials. In order to improve the process, further studies based on different photocatalyst concentration and pH conditions were performed. Reuse capacity of these materials was investigated upon three photocatalytic cycles. KW - Photodegradation KW - 17 beta-Estradiol KW - Porphyrin PY - 2017 DO - https://doi.org/10.1016/j.dyepig.2017.04.010 SN - 0143-7208 VL - 142 SP - 535 EP - 543 PB - Elsevier Ltd. AN - OPUS4-43308 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Neamtu, Mariana A1 - Nadejde, C. A1 - Hodoroaba, Vasile-Dan A1 - Schneider, Rudolf A1 - Verestiuc, L. A1 - Panne, Ulrich T1 - Functionalized magnetic nanoparticles: Synthesis, characterization, catalytic application and assessment of toxicity JF - Scientific Reports N2 - Cost-effective water cleaning approaches using improved Treatment technologies, for instance based on catalytic processes with high activity catalysts, are urgently needed. The aim of our study was to synthesize efficient Fenton-like photo-catalysts for rapid degradation of persistent organic micropollutants in aqueous medium. Iron-based nanomaterials were chemically synthesized through simple procedures by immobilization of either iron(II) oxalate (FeO) or iron(III) citrate (FeC) on magnetite (M) nanoparticles stabilized with polyethylene glycol (PEG). Various investigation techniques were performed in order to characterize the freshly prepared catalysts. By applying advanced oxidation processes, the effect of catalyst dosage, hydrogen peroxide concentration and UV-A light exposure were examined for Bisphenol A (BPA) conversion, at laboratory scale, in mild conditions. The obtained results revealed that BPA degradation was rapidly enhanced in the presence of low-concentration H2O2, as well as under UV-A light, and is highly dependent on the surface characteristics of the catalyst. Complete photo-degradation of BPA was achieved over the M/PEG/FeO catalyst in less than 15 minutes. Based on the catalytic performance, a hierarchy of the tested catalysts was established: M/PEG/FeO > M/PEG/FeC > M/PEG. The results of cytotoxicity assay using MCF-7 cells indicated that the aqueous samples after treatment are less cytotoxic. KW - Bisphenol A KW - Magnetic nanocatalyst KW - Endocrine disruptor KW - Nanoparticle KW - Photodegradation KW - Fenton PY - 2018 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-448297 DO - https://doi.org/10.1038/s41598-018-24721-4 SN - 2045-2322 VL - 8 SP - Article 6278, 1 EP - 11 PB - Springer Nature CY - London AN - OPUS4-44829 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mekonnen, Tessema Fenta A1 - Panne, Ulrich A1 - Koch, Matthias T1 - New photodegradation products of the fungicide fluopyram: Structural elucidation and mechanism identification JF - Molecules N2 - Identifying the fate of agrochemicals is important to understand their potential risk for living organisms. We report here new photodegradation products (PPs) of the fungicide fluopyram. The PPs were produced by irradiating a fluopyram standard in 0.1% acetonitrile aqueous media by a 150-W medium pressure Hg-lamp that emits wavelengths between 200–280 nm. The structural elucidation of PPs was achieved by combining the retention time, isotopic pattern, targeted fragmentation, and accurate mass measurements using liquid chromatography-tandem mass spectrometry (LC-MS/MS) and high resolution-MS (HRMS). In addition to previously known PPs, seven new PPs of fluopyram were identified in this work: mainly dihydroxyl and hydroxylimide fluopyram as well as mono, di, and trihydroxyl lactam. Additionally, two PPs were found to be formed by rearrangement after the loss of H2C=CH2. Hence, the results of the work contribute to extending the current knowledge regarding the photoinduced fate of agrochemicals, and fluopyram in particular. KW - Photodegradation KW - Transformation products KW - LC-MS/MS KW - HRMS KW - Fungicide PY - 2018 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-466347 DO - https://doi.org/10.3390/molecules23112940 SN - 1420-3049 VL - 23 IS - 11 SP - 2940, 1 EP - 13 PB - MDPI CY - Basel AN - OPUS4-46634 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mekonnen, Tessema Fenta A1 - Bayrne, Liam A1 - Koch, Matthias A1 - Panne, Ulrich T1 - Electrochemistry coupled online to mass spectrometry for prediction of metabolic transformation processes of pesticides N2 - Nowadays, electrochemistry coupled online to mass spectrometry (EC-MS) or to liquid chromatography-mass spectrometry (EC-LC-MS) is a technique of interest to investigate metabolic transformation of xenobiotics in living organisms. It enables the production of redox products in an electrochemical cell, the separation by an analytical column and the detection by mass spectrometry online. Furthermore, EC-LC-MS enables to determine short lived transformation products (TPs) and their bioconjugates in a fully automated way. Although the EC-MS selectivity is incomparable to enzymatic reactions, it is advantageous by reducing analysis time and matrix complexity compared to cytochrome based metabolism. However, in the development of EC-MS, most efforts are devoted for prediction of drug metabolism in the human body and there is very limited work on agrochemicals in general. The main objective of this work was to develop an online EC-LC-MS method that could predict the metabolism of fluopyram (fungicide) and chlorpyrifos (insecticide). Oxidation products were produced by using a boron doped diamond electrode and characterized by either online LC-MS or offline LC-MS/MS. After incubation with rat and human liver microsomes, different targeted and suspected metabolites were identified by LC-MS/MS and high resolution-mass spectrometry (HR-MS) and compared with the EC based methods. Additionally, conjugation reactions with a variety of biomolecules such as glucoside and glutathione were investigated by trapping the oxidized species before entering to mass spectrometry. In summary, phase-I metabolism by N-dealkylation, O-dealkylation, P-oxidation, hydroxylation and dearylation and phase-II metabolism by conjugation with glutathione mechanisms were successfully mimicked by EC-LC-MS. Fluopyram is primarily metabolized to 7- and 8-mono- hydroxyl, 7,8-di-hydroxyl and 2-trifluoromethyl benzamide, and chlorpyrifos is metabolized to chlorpyrifos oxon, trichloropyridinol, diethylthiophosphate and diethylphosphate. T2 - 13th Annual LC-MS/MS Workshop on Environmental and Food Safety CY - Buffalo, NY, USA DA - 11.06.2017 KW - Biotransformation KW - Transformation products KW - EC-LC-MS KW - Photodegradation PY - 2017 AN - OPUS4-40601 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mekonnen, Tessema F. A1 - Byrne, Liam A1 - Panne, Ulrich A1 - Koch, Matthias T1 - Investigation of chlorpyrifos and its transformation products in fruits and spices by combining electrochemistry and liquid chromatography coupled to tandem mass spectrometry JF - Food Analytical Methods N2 - The identification of transformation products (TPs) of pesticides in food is a crucial task difficult to tackle, due to the lack of standards. In this work, we present a novel methodology to synthesize five main TP standards of the insecticide chlorpyrifos (CPF) and to investigate their occurrence in selected fruits and spices. TPs were electrochemically (EC) synthesized using a boron-doped diamond electrode (BDD) and identified by EC coupled online to mass spectrometry, LC-MS/MS, and high-resolution mass spectrometry. CPF and its TPs were analyzed in the food samples by LC-MS/MS on multiple reaction monitoring (MRM) after dispersive solid-phase extraction. A good recovery of 83–103% for CPF and 65–85% for TPs was obtained. Matrix effects, which cause signal suppression, ranged between 81 to 95% for all targeted analytes. The limit of detection and quantification for CPF were 1.6–1.9 and 4.9–5.7 μg/kg, respectively. Among investigated samples, CPF was determined in fresh lemon (104 μg/kg), fenugreek seed (40 μg/kg), and black pepper (31 μg/kg). CPF content in all samples was lower than the EU maximum residue level (MRL). The most frequently detected TPs were diethylthiophosphate and diethylphosphate. Other TPs, CPF oxon and trichloropyridinol, were also detected. Hence, EC is a versatile tool to synthesize TP standards which enables the determination of contaminants and residues in foodstuffs even if no commercial standards are available. KW - Transformation product KW - Electrochemistry KW - QuEChERS KW - LC-MS/MS KW - Photodegradation KW - Foodstuffs PY - 2018 UR - https://link.springer.com/article/10.1007/s12161-018-1245-7#citeas DO - https://doi.org/10.1007/s12161-018-1245-7 SN - 1936-9751 SN - 1936-976X VL - 11 IS - 10 SP - 2657 EP - 2665 PB - Springer AN - OPUS4-45834 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lörchner, Dominique A1 - Koch, Matthias A1 - Kroh, L. W. A1 - Köppen, Robert T1 - Photodegradation of the „novel“ brominated flame retardant tris-(2,4,6-tribromophenoxy)-s-triazine T2 - Organohalogen Compounds N2 - Brominated flame retardants (BFRs) comprise a class of structurally diverse compounds that are functionally related and used in materials to reduce the flammability of polymers. Due to their global distribution, potential persistence, bioaccumulation and toxicity most of the BFRs of the first Generation are banned or restricted, and replaced by new ones. However, based on similar properties these new compounds may also pose a serious risk by causing adverse effects to human health and the environment. These alternative BFRs were grouped into two classes: „novel” and „emerging” BFRs. Emerging BFRs are defined as compounds that have been identified in any environmental compartments whereas novel BFRs are only detected in materials and/or goods above 0.1 wt.-%. The environmental fate of these alternative BFRs is partially unknown. Over the past years a multitude of studies on the photodegradation of BFRs in environmental matrices have been conducted to assess the photochemical behavior and fate in the environment. The photolytic debromination reaction is particularly induced among BFRs by UV exposure. The novel brominated triazine-based flame retardant tris-(2,4,6-tribromophenoxy)-s-triazine (TTBPTAZ) (Table 1) is a BFR that is mainly used in acrylonitrile butadiene styrene and high impact polystyrene. Ballesteros-Gómez et al. detected TTBP-TAZ in 8 of 13 plastic parts of consumer products and in 9 of 17 indoor dust samples but the photochemical behavior and fate is not known until now. The results of the present study, focused on photodegradation processes were performed for the first time for TTBP-TAZ to identify the photolysis intermediates and products to assess the environmental fate. T2 - DIOXIN CY - Florence, Italy DA - 29.08.2016 KW - Brominated flame retardants KW - TTBP-TAZ KW - Photodegradation PY - 2016 VL - 78 SP - 699 EP - 702 CY - Bayreuth AN - OPUS4-39037 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lörchner, Dominique A1 - Koch, Matthias A1 - Kroh, Lothar W. A1 - Köppen, Robert T1 - Phototransformation of the “emerging” BFR 1,3,5-Tris-(2,3-dibromopropyl)-1,3,5-triazine-2,4,6-trione N2 - The occurrence and fate of brominated flame retardants (BFRs) in the environment are topics of increasing concern. In recent years, numerous studies about their global transport, UV degradation, bioaccumulation and toxicity were performed to assess their environmental fate. As a result, most of the first generation BFRs are banned or restricted, and replaced by new ones. However, based on similar properties these new compounds may also pose a serious risk by causing adverse effects to human health and the environment. According to the European Food Safety Authority (EFSA) the class of the “emerging” BFRs are defined as compounds that have been identified in any environmental compartments, but the potential for degradation or bioaccumulation of these emerging BFRs is partially unknown. A representative of this class of compounds is the heterocyclic TDBP-TAZTO which was first detected in mollusks from Chinese bohai sea and in environmental matrices near a manufacturing plant in southern china. Furthermore, Wang et al. describe that the growth of the alga Nannochloropsis sp. is inhibited by TDBP-TAZTO in a concentration dependent manner but the photo-chemical behavior as well as the formation of possible photo-transformation products (PTPs) are still unknown. In order to clarify this complex issue photo-degradation experiments were by determining the rate constants and degradation half-life times of TDBP-TAZTO in different solvent compositions. In this study, the photodegradation of TDBP-TAZTO was performed for the first time to identify its photolysis products and to get a first understanding about the main degradation pathway in environmental matrices. T2 - BFR 2017 CY - York, UK DA - 08.05.2017 KW - Phototransformation products KW - Photodegradation KW - TDBP-TAZTO PY - 2017 AN - OPUS4-40351 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Trubiroha, P. T1 - Evaluation of outdoor exposures by means of exposure response functions T2 - Proceedings 8th European Weathering Symposium - Natural and Artificial Ageing of Polymers N2 - Outdoor exposure tests are a common tool to evaluate the weathering resistance of a polymeric material or component. However, they have only a limited validity, mainly due to the limited reproducibility of the weather as well as of the bad adaptability to other exposure sites. Typically, an outdoor exposure is characterized by the measured radiant exposure; sometimes averaged temperature data are added. These can be – separately – related to long-term annual means, to get an idea on the severity of the exposure. However, as for polymeric ageing, irradiance and temperature act simultaneously, such severity of an outdoor exposure could be better described by a computed property change of a similar material, which is calculated from the hourly irradiance and temperature values on the base of established exposure response functions. In this way, various outdoor exposures are evaluated. For several exposure sites, annual deviations of the ageing amount are related to annual mean values, to evaluate the weathering reproducibility at the exposure site. Additionally, correlations to relevant weather parameters are illuminated. Also some specific exposure conditions, such as tilt angle, are tested. Compared to the use of weathering reference materials, this procedure unfavourably depends on the availability of a suited control as well as on the quality of the established exposure response function. In contrast, it enables a later exposure evaluation, on the base of documented weather data, if for instance no reference material was exposed. T2 - 8th European Weathering Symposium CY - Vienna, Austria DA - 20.09.2017 KW - Weathering KW - Service life prediction KW - Photodegradation PY - 2017 SN - 978-3-9818507-1-0 VL - 18 SP - 127 EP - 135 PB - Thomas Würtz Grafik Design CY - Karlsruhe AN - OPUS4-42126 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -