TY - CONF A1 - Rehmer, Birgit A1 - Skrotzki, Birgit T1 - Kriechschädigung bei der thermomechanischen Ermüdung des warmfesten Gusseisens EN-GJSA-NISICR35-5-2 (Ni-Resist D-55) N2 - Die TMF-Lebensdauer des austenitischen Gusseisens Ni-Resist bei Tmin 400°C und Tmax 700, 800 und 900°C wurde untersucht. In-Phase TMF-Versuche bei Tmax 900 °C zeigten (im Gegensatz zu allen anderen TMF Versuchen) von Versuchsbeginn an eine kontinuierliche zyklische Entfestigung. Als Ursache konnte nach umfangreichen metallografischen Untersuchungen für diese Versuchsparameter eine ausgeprägte Kriechschädigung nachgewiesen werden, die bei anderen Ermüdungsversuchen so nicht auftrat. T2 - DVM Workshop "Bauteilverhalten bei thermomechanischer Ermüdung CY - Berlin, Germany DA - 06.04.2017 KW - Ermüdung KW - Kriechen PY - 2017 AN - OPUS4-40071 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rehmer, Birgit T1 - Nationale und internationale Normungsaktivitäten zur Prüfung keramischer Roh- und Werkstoffe in DIN, ISO und CEN T2 - Sitzung des DKG Fachausschusses 6 "Material und Prozessdiagnostik" T2 - Sitzung des DKG Fachausschusses 6 "Material und Prozessdiagnostik" CY - Berlin DA - 2015-12-09 PY - 2015 AN - OPUS4-35090 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rehmer, Birgit A1 - Beckmann, Jörg T1 - Prüfung und Charakterisierung von Hochleistungswerkstoffen in der Bundesanstalt für Materialforschung und -prüfung T2 - eingeladener Vortrag auf der Herbsttagung des DKG-Arbeitskreises Kohlenstoff am 14. - 15.10.2004 T2 - eingeladener Vortrag auf der Herbsttagung des DKG-Arbeitskreises Kohlenstoff am 14. - 15.10.2004 CY - Bad Honnef, Germany DA - 2004-10-14 PY - 2004 AN - OPUS4-7065 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rehmer, Birgit A1 - Skrotzki, Birgit A1 - Kühn, Hans-Joachim T1 - Thermo-mechanical fatigue of heat resistant austenitic cast iron EN-GJSA-NiSiCr35-5-2 (Ni-Resist D-5S) N2 - Austenitic cast iron was primarily used as material for pumps and mountings due to their excellent corrosion resistance. Certain grades, especially those with spherical graphite morphology, offer also a good high temperature strength and a high scaling resistance, which opened new fields of application e.g. for casing part of gas turbines, exhaust manifolds and turbo chargers. For such applications, a high ductility and creep resistance is beneficial, as exhibited by the studied alloy EN-GJSA-XNiSiCr35-5-2. Its high Ni-content produces the austenitic matrix, while Cr increases strength, hardness and scaling resistance. The alloy is standardized according to DIN EN 13835 with respect to chemical composition and mechanical properties (strength, elongation at fracture, Young's modulus, hardness and impact energy) at room temperature. However, data on mechanical properties at high temperature were rarely published in the open literature. In a recently completed research project, we comprehensively characterized the alloy EN-GJSA-XNiSiCr35-5-2 in terms of its temperature dependent mechanical behavior concerning strength and to isothermal as well as non-isothermal fatigue behavior. The results were used to calibrate a material and lifetime model. TMF tests were carried out with a constant minimum temperature (Tmin = 400 °C) and varying maximum temperatures (Tmax = 700 °C, 800 °C, 900 °C) with hold times of 180 s at Tmax and two phase angles (in-phase (IP), 180° out-of-phase (OP)). The investigated alloy showed a strongly deviating TMF behavior as compared to ferritic SiMo alloys investigated in a previous project: the austenitic material exhibits a comparable strength under OP- and IP-TMF loading, while the ferritic alloys showed a distinct higher strength under IP- than under OP-TMF load. At Tmax = 700 °C and 900 °C, the lifetime of Ni-Resist in IP-tests is slightly longer than that of OP-tests, while it is vice versa at Tmax = 800 °C. The IP-tests at Tmax = 900 °C show a comparable lifetime as OP-tests at Tmax = 700 °C and 800 °C, which was unexpected for such a high testing temperature. When plotting the stress range versus N it becomes clear that the behavior at Tmax = 900 °C is different from the other investigated temperatures: at 700 °C and 800 °C the stress-curve exhibits a range of stabilized stress for both phase angles. This is also true for the OP-tests at Tmax = 900 °C. However, all IP-tests at Tmax = 900 °C show a continuous cyclic softening from the beginning on. The stiffness of the test pieces decrease continuously with increasing number of cycles and their surfaces show numerous cracks. Complementary metallographic investigations showed that beside classical fatigue damage with cracks initiated at the surface, intergranular creep damage was found in the volume of the test pieces. Pores and cracks are formed at grain boundaries perpendicular to the applied load. This is also a distinct difference to the SiMo alloys. T2 - 3rd International Workshop on Thermo-mechanical Fatigue CY - Berlin, Germany DA - 27.04.2016 KW - cast iron. fatigue KW - cyclic softening PY - 2016 AN - OPUS4-35912 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rehmer, Birgit A1 - Beckmann, Jörg T1 - Mechanical Behavior Especially at Very High Temperatures (Invited) T2 - 29th International Conference on Advanced Ceramics and Composites T2 - 29th International Conference on Advanced Ceramics and Composites CY - Cocoa Beach, FL, USA DA - 2005-01-23 PY - 2005 AN - OPUS4-7134 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rehmer, Birgit A1 - Pulz, Robert T1 - Thermal shock behaviour of ceramics under different testing conditions T2 - 11th Intern. Conference and Exhibitions of the European Ceramic Society T2 - 11th Intern. Conference and Exhibitions of the European Ceramic Society CY - Kraków, Poland DA - 2009-06-21 PY - 2009 AN - OPUS4-18697 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rehmer, Birgit A1 - Kühn, Hans-Joachim A1 - Sonntag, Nadja A1 - Henkel, S. A1 - Weidner, A. A1 - Biermann, H. T1 - LCF behaviour and microstructure of alpha-brass CuZn30 under biaxial, planar biaxial and tension-torsion loading conditions T2 - 10. International Conference on Multiaxial Fatigue and Fracture T2 - 10. International Conference on Multiaxial Fatigue and Fracture CY - Kyoto, Japan DA - 2013-06-03 PY - 2013 AN - OPUS4-32920 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rehmer, Birgit A1 - Finn, Monika A1 - Uhlemann, Patrick A1 - Skrotzki, Birgit A1 - Scheuerlein, Ch. T1 - Vergleichende Bewertung verschiedener Verfahren der E-Modulbestimmung für metallische Werkstoffe N2 - Für numerische Beanspruchungs- und Lebensdaueranalysen ist die Kenntnis des E-Moduls der eingesetzten Werkstoffe von zentraler Bedeutung. Für seine experimentelle Bestimmung wurden eine Vielzahl von Verfahren entwickelt, die zum Teil werkstoffspezifisch Eingang in die Normung gefunden haben. Prinzipiell können diese Verfahren in zwei Gruppen eingeteilt werden - die statischen und die dynamischen Prüfverfahren. Während die statischen Verfahren auf der direkten Messung des Spannungs-Dehnungs-Zusammenhangs während einer Belastung im elastischen Verformungsbereich beruhen (Zug-, Biege- bzw. Druckversuch) nutzen die dynamischen Verfahren die Analyse der resultierenden Schwingungen nach einer entsprechenden Anregung eines Prüfkörpers (Resonanz- bzw. Impulsanregungsmethode). Für verschiedene Werkstoffe wurden statische und dynamische Verfahren zur E-Modulbestimmung eingesetzt. Die Unterschiede und Vorteile der verschiedenen Verfahren werden vergleichend diskutiert. T2 - Tagung Werkstoffprüfung 2017 CY - Berlin, Germany DA - 30.11.2017 KW - E-Modul KW - Zugversuch KW - Druckversuch KW - Resonanzmethode KW - Impuls-Anregungs-Methode PY - 2017 AN - OPUS4-43253 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -