TY - JOUR A1 - Koch, Frank A1 - Ballheimer, Viktor A1 - Zeisler, Peter T1 - BAM guideline draft for lid and trunnion systems: contents, structure, compatibility and use JF - Packaging, transport, storage & security of radioactive materials (RAMTRANS) N2 - The Federal Institute for Materials Research and Testing (BAM) intends to provide a new guideline for the analysis and assessment of lid and trunnion systems. This guideline is discussed in the present paper with respect to its contents and structure, its compatibility with other guidelines and selective technical issues to demonstrate its use. Particularly, the motivation, the principles and the background of the guideline are addressed. Therefore, the present paper discusses current conclusions drawn from experimental results and the wide use of advanced analysis methods such as finite element analysis as well as the incorporation of these aspects in the guideline draft. KW - Guideline KW - Trunnion KW - Bolts KW - Seals KW - Fatigue PY - 2006 SN - 1746-5095 SN - 1746-5109 SN - 0957-476X VL - 17 IS - 3 SP - 153 EP - 157 PB - Ramtrans Publ. CY - Ashford AN - OPUS4-14360 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rolle, Annette A1 - Droste, Bernhard A1 - Schubert, Sven A1 - Probst, Ulrich A1 - Wille, Frank T1 - Verification of activity release compliance with regulatory limits within spent fuel transport cask assessment JF - Packaging, transport, storage & security of radioactive materials (RAMTRANS) N2 - Admissible limits for activity release from type B(U) packages for spent fuel transport specified in the International Atomic Energy Agency regulations (10-6 A2 h-1 for normal conditions of transport and A2 per week for accidental conditions of transport) have to be kept by an appropriate function of the cask body and its sealing system. Direct measurements of activity release from the transport casks are not feasible. Therefore, the most common method for the specification of leak tightness is to relate the admissible limits of activity release to equivalent standardised leakage rates. Applicable procedure and calculation methods are summarised in the International Standard ISO 12807 and the US standard ANSI N14ยท5. BAM as the German competent authority for mechanical, thermal and containment assessment of packages liable for approval verifies the activity release compliance with the regulatory limits. Two fundamental aspects in the assessment are the specification of conservative design leakage rates for normal and accidental conditions of transport and the determination of release fractions of radioactive gases, volatiles and particles from spent fuel rods. Design leakage rates identify the efficiency limits of the sealing system under normal and accidental transport conditions and are deduced from tests with real casks, cask models or components. The releasable radioactive content is primarily determined by the fraction of rods developing cladding breaches and the release fractions of radionuclides due to cladding breaches. The influence of higher burn-ups on the failure probability of the rods and on the release fractions are important questions. This paper gives an overview about methodology of activity release calculation and correlated boundary conditions for assessment. KW - Containment compliance KW - Seals KW - Regulations KW - Activity release PY - 2012 DO - https://doi.org/10.1179/1746510913Y.0000000012 SN - 1746-5095 SN - 1746-5109 SN - 0957-476X VL - 23 IS - 3-4 SP - 149 EP - 152 PB - Ramtrans Publ. CY - Ashford AN - OPUS4-29244 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -