TY - JOUR A1 - Maisels, A. A1 - Hiller, A. A1 - Simon, Franz-Georg T1 - Chemical Recycling for Plastic Waste: Status and Perspectives JF - ChemBioEng Reviews N2 - Industrial-scale mechanical recycling of plastics has been established for years, but has technical and economic limits. Chemical recycling processes lead back to monomers or to the raw materials, so that in the end new goods can be produced for all areas of application of plastics. The variety of chemical recycling processes is large. The capacities of the plants are still low today. The profitability of the plants is strongly influenced by the price of oil; the profitability limit is currently between 50 and 60 US $ per barrel. KW - Chemical recycling KW - Plastic waste KW - Circular economy KW - Pyrolysis KW - Solvolysis PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-565700 DO - https://doi.org/10.1002/cben.202200024 SN - 2196-9744 VL - 9 IS - 6 SP - 541 EP - 555 PB - Wiley-VCH GmbH CY - Weinheim AN - OPUS4-56570 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Simon, Franz-Georg A1 - Keldenich, K. T1 - Abfallwirtschaft im Spannungsfeld zwischen thermischer Behandlung und Recycling JF - Chemie - Ingenieur - Technik N2 - Die Abfallwirtschaft in Deutschland behandelt eine Menge von 359 Mio. Tonnen. Den größten Anteil haben Bau- und Abbruchabfälle mit 54%. Die Behandlungsverfahren dafür unterscheiden sich stark von denen für Siedlungsabfälle. Gemäß Europäischer Abfallrichtlinie ist Recycling gegenüber einer energetischen Verwertung in der Hierarchie der Abfallbehandlungsverfahren höher bewertet. Bei der thermischen Behandlung entscheidet die Energieeffizienz des Verfahrens, ob eine Behandlung als Verwertung oder Beseitigung gilt. Nach dieser Richtlinie erfolgt die Berechnung der Energieeffizienz stark vereinfacht mit der sogenannten R1-Formel. Veröffentlichte Daten zu Wärme- und Stromproduktion verschiedener thermischer Abfallbehandlungsanlagen werden mit der R1-Formel und Daten aus der Literatur verglichen. Mengen und Entsorgungswege sowie Möglichkeiten zur Bewertung von Abfallbehandlungsverfahren werden diskutiert. --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Waste management in Germany covers an amount of 359 million tons. The largest fraction is construction and demolition waste (C&D waste) with some 54%. The treatment processes for C&D waste differ from those for municipal solid waste. According to the European Directive on Waste a waste hierarchy shall apply where recycling has a higher priority than energy recovery. A thermal treatment is regarded as recovery operation only if the energy efficiency is above a certain limit. Under the terms of the directive a simplified calculation of the energy efficiency is perfomed using the so-called R1 formula. Published data on heat and power production of several thermal waste treatment plants are compared to the R1 formula and data from literature. Amount and waste management options for different waste fractions and how to evaluate different waste management processes are discussed. KW - Abfall KW - Energieeffizienz KW - Ersatzbrennstoffe KW - Kunststoffabfälle KW - Recycling(RC)-Baustoffe KW - Energy efficiency KW - Plastic waste KW - Recycled aggregates KW - Refuse derived fuels KW - Waste PY - 2012 DO - https://doi.org/10.1002/cite.201200005 SN - 0009-286X SN - 1522-2640 VL - 84 IS - 7 SP - 985 EP - 990 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-26210 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -