TY - JOUR A1 - Farooq, M. U. A1 - Klement, U. A1 - Nolze, Gert T1 - EBSD and EDX analysis at the cladding - Substrate interface of a laser clad railway wheel JF - International journal of materials research N2 - Electron backscatter diffraction and energy-dispersive X-ray spectrometry were used to investigate the intermixed interface produced during laser cladding of a Co-Cr-Mo alloy on a steel substrate. A multi-component system and rapid solidification conditions together lead to a complex microstructure at the interface. The solidification of the cladding starts with the formation of an interface layer, which is about 75µm in thickness and consists of randomly oriented equiaxed grains of Co-Cr-Fe solid solution and martensite. Orientation analysis of the grains in the interface layer revealed that some grains have a special orientation relationship with the former austenite grains in the heat affected zone but the cladding is not formed by epitaxial growth on the substrate. Intermixing of the materials at the interface is providing a strong bond between the substrate and the cladding. For a grain from the interface layer to emerge as columnar grain in the cladding, it was determined that its <001> crystallographic direction is not supposed to deviate more than 25° from the sample normal direction. KW - EBSD KW - Laser cladding KW - Interface KW - Orientation KW - Nishiyama - Wassermann relationship PY - 2006 DO - https://doi.org/10.3139/146.101413 SN - 1862-5282 VL - 97 IS - 11 SP - 1512 EP - 1518 PB - Hanser CY - München AN - OPUS4-14425 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hertel, Horst A1 - Posacki, Erol A1 - Plarre, Rüdiger T1 - Directional orientation of Reticulitermes flavipes (Isoptera: Rhinotermitidae) JF - Sociobiology N2 - Subterranean termites moving in the peripheral tubular network of their foraging area need to distinguish the trail direction. In a natural gallery or tunnel network of Reticulitermes flavipes the branches at bifurcations generally have an acute angle between them. the resulting obtuse angle from the main trail leading into a branch is preferred by commuting termites. In experiments with artificial gallery forks, termites returning from a food source only neglected the trail junction leading to the nest and preferred the trail to a second food source if the angle to the nest was acute. A right angle to the nest was preferred over a straight way leading to a second food source. This preference to the nest increased when the three branches at trifurcations were arranged equi-angular. This preferred orientation could be attributed to attracting odours from close-by gallery material. Additionally, R. flavipes moved more slowly towards a food source consisting of pine wood than on the way back to the nest, as was shown in artificial one-way galleries. However, the significance of this speed difference remains uncertain because the speed of a homing termite in an artificially reversed trail does not slow down to the speed of a food foraging termite. KW - Termites KW - Orientation KW - Foraging KW - Tunnel network PY - 2010 SN - 0361-6525 VL - 56 IS - 1 SP - 223 EP - 233 PB - California State University CY - Chico, Calif. AN - OPUS4-21674 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wisniewski, W. A1 - Thieme, C. A1 - Müller, Ralf A1 - Reinsch, Stefan A1 - Groß-Barsnick, S.-M. A1 - Rüssel, C. T1 - Oriented surface nucleation and crystal growth in a 18BaO·22CaO·60SiO2 mol% glass used for SOFC seals JF - CrystEngComm N2 - A glass of the composition 37BaO·16CaO·47SiO2 wt% produced on an industrial scale is crystallized at 970 °C for times ranging from 15 min to 2 h. The crystallization at the immediate surface as well as the crystal growth into the bulk are analyzed using scanning electron microscopy (SEM) including energy dispersive X-ray spectroscopy (EDXS) and electron backscatter diffraction (EBSD) as well as X-ray diffraction in the Θ–2Θ setup (XRD). The immediate surface shows the oriented nucleation of walstromite as well as the formation of wollastonite and an unknown phase of the composition BaCaSi3O8. All three phases also grow into the bulk where walstromite ultimately dominates the kinetic selection and grows throughout the bulk due to a lack of bulk nucleation. Walstromite shows systematic orientation changes as well as twinning during growth. A critical analysis of the XRD-patterns acquired from various crystallized samples indicates that their evaluation is problematic and that phases detected by XRD in this system should be verified by another method such as EDXS. KW - Glass KW - Surface nucleation KW - Orientation KW - EBSD PY - 2018 DO - https://doi.org/10.1039/c7ce02008b VL - 20 IS - 6 SP - 787 EP - 795 PB - Royal Society of Chemistry AN - OPUS4-44405 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -