TY - CONF A1 - Boro, I. A1 - Hinrichsen, G. A1 - Kalinka, Gerhard A1 - Hampe, Andreas A1 - Koßmehl, G. T1 - Zur Wechselstromleitfähigkeit von elektrisch leitfähgen Polymeren T2 - Präsentationsveranstaltung des Berliner Verbandes für Polymerforschung e.V. CY - Berlin, Germany DA - 1989-03-25 PY - 1989 AN - OPUS4-12126 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Ermüdungsverhalten von faserverstärkten Thermoplasten T2 - Präsentationsveranstaltung des Berliner Verbands für Polymerforschung CY - Berlin, Germany DA - 1989-05-18 PY - 1989 AN - OPUS4-12094 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard A1 - Boro, I. A1 - Hinrichsen, G. A1 - Hampe, Andreas T1 - Untersuchungs des Ermüdungsverhaltens glasfaserverstärkter Thermoplaste mittels Schwingungsmessungen T2 - Zweites Werkstoffsymposium Neue Verbundwerkstoffe CY - Regensburg, Germany DA - 1990-10-05 PY - 1990 AN - OPUS4-12127 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kalinka, Gerhard A1 - Boro, I. A1 - Augustin, G. A1 - Hampe, Andreas A1 - Hinrichsen, G. T1 - Ermüdungsverhalten von Hochleistungs-Faserverbundwerkstoffen mit thermoplastischer Matrix KW - Verbundwerkstoffe KW - Ermüdung KW - Biegeschwingung KW - Thermoplaste KW - Glasfaser PY - 1990 SN - 0023-5563 VL - 80 IS - 5 SP - 626 EP - 630 PB - Hanser CY - München AN - OPUS4-11996 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kalinka, Gerhard A1 - Boro, I. A1 - Augustin, G. A1 - Hampe, Andreas A1 - Hinrichsen, G. T1 - Fatigue Behaviour of High-Performance Fibre-Reinforced Composites with a Thermoplastic Matrix KW - Verbundwerkstoffe KW - Ermüdung KW - Biegeschwingung KW - Thermoplaste KW - Glasfaser PY - 1990 SN - 0723-0192 VL - 80 IS - 5 SP - 36 EP - 38 PB - Hanser CY - Munich AN - OPUS4-11999 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meretz, S. A1 - Lahser, K. A1 - Lehmann, V. A1 - Kalinka, Gerhard A1 - Hampe, Andreas T1 - Kristallisationskinetik bei Faserverbundwerkstoffen T2 - Kolloquium der Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin, Germany DA - 1993-10-01 PY - 1993 AN - OPUS4-12128 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hampe, Andreas A1 - Kalinka, Gerhard A1 - Schulz, Eckhard A1 - Meretz, S. T1 - An Advanced Equipment for Single-Fibre Pull-Out test designed to monitor the fracture process T2 - Interfacial Phenomena in Composite Materials CY - Cambridge, England DA - 1993-09-13 PY - 1993 AN - OPUS4-12095 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Nowak, H. A1 - Kalinka, Gerhard A1 - Hinrichsen, G. T1 - Investigations on the cold crystallization of pure and filled PETP by dielectric measurements N2 - The cold crystallization of pure and filled poly(ethylene terephthalate) (PETP) after quenching from the melt has been investigated by dielectric measurements in two different modes: The first one using constant heating-rate (in the temperature range from 320 to 480 K) and the second one under isothermal conditions (at 378 K). The complex dielectric constant (ε´, tan δ) is influenced by crystallization. Two α-relaxation regions are identified: The αa-relaxation region from the pure amorphous phase and the α´-relaxation region from the spherulitic phase. The investigations on the filled systems (PETP + 10% aramid puple, PETP + 30% short glass fibres) prove that an influence of the fillers on the time delay and rate of crystallization and on the geometry of the growing spherulites exists. KW - Verbundwerkstoffe KW - Gefüllte Kunststoffe KW - Elektrische Eigenschaften KW - Verlustfaktor KW - Dielektrische Analyse PY - 1993 SN - 0323-7648 SN - 1521-4044 VL - 44 IS - 1 SP - 25 EP - 28 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-11995 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard A1 - Hampe, Andreas T1 - Charakterisierung des Interface-Versagens in Faserverbundwerkstoffen mit mikromechanischen Testmethoden T2 - 5. Berliner Polymeren-Tage CY - Potsdam, Germany DA - 1994-10-05 PY - 1994 AN - OPUS4-12096 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schulz, Eckhard A1 - Kalinka, Gerhard A1 - Meretz, S. A1 - Hampe, Andreas T1 - Pull-out of Single Fibres KW - Verstärkungsfaser KW - Verbundwerkstoffe KW - Interface KW - Adhäsion KW - Reibung KW - Haftung KW - Thermoplast PY - 1994 SN - 0945-0084 VL - 84 IS - 5 SP - 25 EP - 26 PB - Hanser CY - München AN - OPUS4-11989 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Auer, C. A1 - Kalinka, Gerhard A1 - Krause, T. A1 - Hinrichsen, G. T1 - Crystallization Kinetics of Pure and Fiber-Reinforced Poly(phenylene Sulfide) KW - Verbundwerkstoffe KW - Thermoplaste KW - Kristallisation KW - Kristallisationskinetik KW - Erstarrung KW - Avrami KW - Modellrechnung KW - Simulation PY - 1994 SN - 0021-8995 SN - 1097-4628 VL - 51 SP - 407 EP - 413 PB - Wiley InterScience CY - Hoboken, NJ AN - OPUS4-11991 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krause, T. A1 - Kalinka, Gerhard A1 - Auer, C. A1 - Hinrichsen, G. T1 - Computer Simulation of Crystallization Kinetics in FIber-Reinforced Composites KW - Verbundwerkstoffe KW - Thermoplaste KW - Kristallisation KW - Kristallisationskinetik KW - Erstarrung KW - Avrami KW - Modellrechnung KW - Simulation PY - 1994 SN - 0021-8995 SN - 1097-4628 VL - 51 SP - 399 EP - 406 PB - Wiley InterScience CY - Hoboken, NJ AN - OPUS4-11992 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schulz, Eckhard A1 - Kalinka, Gerhard A1 - Meretz, S. A1 - Hampe, Andreas T1 - Einzelfaserauszug - Eine Methode zum Bestimmen der Grenzflächenfestigkeit KW - Verstärkungsfaser KW - Verbundwerkstoffe KW - Interface KW - Adhäsion KW - Reibung KW - Haftung KW - Thermoplast PY - 1994 SN - 0023-5563 VL - 84 IS - 5 SP - 608 EP - 610 PB - Hanser CY - München AN - OPUS4-11994 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard A1 - Hinrichsen, G. T1 - Computersimulation der lamellar-shpärolithischen Kristallisation bei Polymeren T2 - 5. Berliner Polymeren-Tage CY - Potsdam, Germany DA - 1994-10-05 PY - 1994 AN - OPUS4-12007 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hampe, Andreas A1 - Kalinka, Gerhard A1 - Schulz, Eckhard T1 - The Fracture Process in the Interphase Investigated by the Single Fiber Pull-out Test T2 - Composites Testing and Standardisation ECCM-CTS 2 CY - Hamburg, Germany DA - 1994-09-13 PY - 1994 AN - OPUS4-12009 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hampe, Andreas A1 - Marotzke, Christian A1 - Brzezinka, Klaus-Werner A1 - Kalinka, Gerhard A1 - Schulz, Eckhard T1 - The Fracture Process in the Fibre/Matrix Interphase T2 - The Fifth International Conference on Composite Interfaces CY - Gothenburg, Sweden DA - 1994-07-20 PY - 1994 AN - OPUS4-5908 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard A1 - Hampe, Andreas A1 - Marotzke, Christian T1 - Charakterisierung des Interface-Versagens in Faserverbundwerkstoffen mit mikromechanischen Testmethoden T2 - 5. Berliner Polymeren Tage CY - Potsdam, Germany DA - 1994-10-05 PY - 1994 AN - OPUS4-5910 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Kalinka, Gerhard T1 - Ein Beitrag zur Kristallisation gefüllter und ungefüllter Thermoplaste N2 - Hier wird der chronologische Verlauf der Kristallisation verfolgt. Sie beginnt mit den thermodynamischen Grundlagen der Keimbildung und des Wachstums, stellt anschließend Wachstumsformen in der Frühlphase der Kristallisation vor und behandelt schließlich die spärolithische Hauptkristallisation sowie die sogenannte Nachkristallisation. T3 - BAM Forschungsberichtreihe - 208 PY - 1995 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-2420 SN - 978-3-89429-557-0 SN - 0938-5533 VL - 208 SP - 1 EP - 64 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-242 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schulz, Eckhard A1 - Kalinka, Gerhard T1 - Effect of Transcrystallization in Carbon Fibre Reinforced Poly(p-phenylene sulfide) Composites on the Interfacial Shear Strength Investigated with the Single Fibre Pull-out Test T2 - Europhysics Conference on Macromolecular Physics CY - Prague, Czech Republic DA - 1995-07-17 PY - 1995 AN - OPUS4-12084 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hinrichsen, G. A1 - Kalinka, Gerhard A1 - Marotzke, Christian T1 - Computer simulation of spherulitic formation and crystallization in semicrystalline polymers T2 - Europhysics Conference on Macromolecular Physics CY - Prague, Czech Republic DA - 1995-07-17 PY - 1995 AN - OPUS4-12085 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard A1 - Hampe, Andreas T1 - Charakterisierung des Faser-Matrix-Interface mit dem Indentation-Test T2 - Verbundwerkstoffe und Werkstoffverbunde CY - Bayreuth, Germany DA - 1995-10-24 PY - 1995 AN - OPUS4-12097 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard A1 - Hampe, Andreas T1 - Energy Dissipation of the Fibre-Matrix Debonding Process Investigated with the Indentation Technique T2 - Interfacial Phenomena of Composite Materials IPCM'95 CY - Eindhoven, Netherlands DA - 1995-09-11 PY - 1995 AN - OPUS4-12098 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard A1 - Schulz, Eckhard T1 - Der Einfluss der Transkristallisation auf die scheinbare Scherfestigkeit von kohlefaserverstärktem Polyphenylensulid (PPS) mit der Einzelfaserauszugsmethode T2 - Verbundwerkstoffe und Werkstoffverbunde CY - Bayreuth, Germany DA - 1995-10-24 PY - 1995 AN - OPUS4-12099 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hampe, Andreas A1 - Kalinka, Gerhard A1 - Meretz, S. A1 - Schulz, Eckhard T1 - An advanced equipment for single-fibre pull-out test designed to monitor the fracture process KW - Verbundwerkstoffe KW - Thermoplaste KW - Adhäsion KW - Reibung KW - Haftung KW - Interface KW - Schubfestigkeit KW - Scherfestigkeit KW - Messmethode PY - 1995 SN - 0010-4361 VL - 26 IS - 1 SP - 40 EP - 46 PB - Butterworth-Heinemann CY - Guildford, Surrey AN - OPUS4-11988 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard A1 - Hampe, Andreas T1 - Charakterisierung des Faser-Matrix-Interface mit dem Indentation-Test T2 - Verbundwerkstoffe und Werkstoffverbunde CY - Bayreuth, Germany DA - 1995-10-25 PY - 1995 AN - OPUS4-12008 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Sturm, Heinz A1 - Schulz, Eckhard T1 - Local AC current contrast on carbon fiber surfaces imaged by scanning force microscopy N2 - After a delamination process in a C-fiber reinforced polymer composite, the identification of the polymer residue of poly-(phenylene sulphide) on carbon fiber surfaces gives important information on the composite failure mechanism. Using scanning force microscopy (SFM) in its lateral force imaging mode or with the stiffness imaging mode, it is almost impossible to distinguish the two composite components owing to a very low material-based contrast of the local friction and compliance. The new technique using contrast based on a local AC current measurement allows a clear identification of the conducting carbon fiber and the non-conducting polymer coverage. KW - Matrix adhesion KW - Films KW - Photoconduction KW - Composites PY - 1995 U6 - https://doi.org/10.1002/actp.1995.010460505 SN - 0323-7648 SN - 1521-4044 VL - 46 IS - 5 SP - 379 EP - 384 PB - Wiley-VCH Verl. CY - Weinheim, Germany AN - OPUS4-6848 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR T1 - Amts- und Mitteilungsblatt, Band 25, Heft 4 T3 - Amts- und Mitteilungsblatt der BAM - 4/1995 PY - 1995 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-553342 SN - 0340-7551 VL - 25 IS - 4 SP - 765 EP - 924 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-55334 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR T1 - Amts- und Mitteilungsblatt, Band 25, Heft 3 T3 - Amts- und Mitteilungsblatt der BAM - 3/1995 PY - 1995 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-553369 SN - 0340-7551 VL - 25 IS - 3 SP - 629 EP - 768 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-55336 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR T1 - Amts- und Mitteilungsblatt, Band 25, Heft 2 T3 - Amts- und Mitteilungsblatt der BAM - 2/1995 PY - 1995 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-553376 SN - 0340-7551 VL - 25 IS - 2 SP - 331 EP - 630 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-55337 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR T1 - Amts- und Mitteilungsblatt, Band 25, Heft 1 T3 - Amts- und Mitteilungsblatt der BAM - 1/1995 PY - 1995 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-553393 SN - 0340-7551 VL - 25 IS - 1 SP - 1 EP - 336 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-55339 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard A1 - Leistner, André A1 - Hampe, Andreas T1 - Characterization of the fibre-matrix interface with the indentation technique T2 - 6th International Conference on Composite Interfaces (ICCI-VI) CY - Zichron Ya'akov, Israel DA - 1996-05-05 PY - 1996 AN - OPUS4-12086 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hinrichs, V. A1 - Kalinka, Gerhard A1 - Hinrichsen, G. T1 - An Avrami-based model for the description of the secondary crystallization of polymers N2 - A mathematical model for the description of the overall crystallization of polymers has been developed which separates the pure geometric spreading of the semicrystalline superstructures from the increasing crystallinity inside these entities. The model uses the Avrami theory for the geometric part and a freely optional function for the increasing local crystallinity. The two functions are combined by a mathematical procedure called convolution. The free option of the local crystallinity function enables this model to permit calculation of this function, which is not accessible to direct measurement. Thus with given Avrami parameters and measured values of the time-dependent overall crystallinity, this function of the local crystallinity (secondary crystallization function) can be calculated. The model has been applied to test data produced by computer simulations. KW - Thermoplaste KW - Kristallisation KW - Nachkristallisation KW - Sphärolithe KW - Kristallisationskinetik KW - Modellrechnung PY - 1996 U6 - https://doi.org/10.1080/00222349608220382 SN - 0022-2348 SN - 1525-609X VL - 35 IS - 3-4 SP - 295 EP - 302 PB - Dekker Chemistry CY - New York, NY AN - OPUS4-11983 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schulz, Eckhard A1 - Kalinka, Gerhard A1 - Auersch, W. T1 - Effect of Transcrystallization in Carbon Fiber Reinforced Poly(p/phenylene sulfide) Composites on the Interfacial Shear Strength Investigated with the Single Fiber Pull-Out Test N2 - The effect of transcrystallinity in carbon fiber reinforced poly(p-phenylene sulfide (PPS) composites on the apparent shear strength was investigated with the single fiber pull-out test. Transcrystalline zones around the reinforcing fibers do not seem to improve the adhesion level significantly. Neighbor fibers hinder the formation of the transcrystalline zone and a ductile fracture behavior can be observed. However, the apparent strength level is slightly higher for composites containing such reinforcing neighbor fibers compared with single fiber composite samples. During annealing a brittle interface can be formed in the multifiber composite yielding a higher level of the apparent shear strength. KW - Thermoplaste KW - Kristallisation KW - Transkristallisation KW - Interface KW - Verbundwerkstoffe KW - Pull-out KW - Haftung KW - Adhäsion KW - Reibung PY - 1996 U6 - https://doi.org/10.1080/00222349608220393 SN - 0022-2348 SN - 1525-609X VL - 35 IS - 3-4 SP - 527 EP - 546 PB - Dekker Chemistry CY - New York, NY AN - OPUS4-11987 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hampe, Andreas A1 - Marotzke, Christian A1 - Kalinka, Gerhard T1 - Mechanische Messungen der Bruchzähigkeit des Faser-Matrix-Grenzbereiches in polymeren Verbundwerkstoffen T2 - 35. Internationale Chemiefaser-Tagung CY - Dornbirn, Austria DA - 1996-09-25 PY - 1996 AN - OPUS4-5922 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR T1 - Amts- und Mitteilungsblatt, Band 26, Heft 4 T3 - Amts- und Mitteilungsblatt der BAM - 4/1996 PY - 1996 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-553300 SN - 0340-7551 VL - 26 IS - 4 SP - 663 EP - 1214 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-55330 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR T1 - Amts- und Mitteilungsblatt, Band 26, Heft 3 T3 - Amts- und Mitteilungsblatt der BAM - 3/1996 PY - 1996 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-553316 SN - 0340-7551 VL - 26 IS - 3 SP - 339 EP - 666 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-55331 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR T1 - Amts- und Mitteilungsblatt, Band 26, Heft 2 T3 - Amts- und Mitteilungsblatt der BAM - 2/1996 PY - 1996 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-553325 SN - 0340-7551 VL - 26 IS - 2 SP - 119 EP - 340 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-55332 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR T1 - Amts- und Mitteilungsblatt, Band 26, Heft 1 T3 - Amts- und Mitteilungsblatt der BAM - 1/1996 PY - 1996 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-553339 SN - 0340-7551 VL - 26 IS - 1 SP - 1 EP - 120 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-55333 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hampe, Andreas A1 - Kalinka, Gerhard T1 - Energy based characterization of the fibre-matrix interface using the pull-out and push-in test T2 - Interfacial Phenomena in Composite Materials 97 CY - Eger, Hungary DA - 1997-03-01 PY - 1997 AN - OPUS4-12087 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hampe, Andreas A1 - Bohse, Jürgen A1 - Kalinka, Gerhard A1 - Schulz, Eckhard T1 - Bruchzähigkeit und Phasenhaftung von unidirektionalen PP/GF-Verbunden T2 - Verbundwerkstoffe und Werkstoffverbunde CY - Kaiserslautern, Germany DA - 1997-09-17 PY - 1997 AN - OPUS4-12088 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hinrichs, Volker A1 - Kalinka, Gerhard A1 - Leistner, André A1 - Hinrichsen, G. T1 - Dynamische Einzelfaserbelastung T2 - Berliner Polymerentage CY - Berlin, Germany DA - 1997-10-09 PY - 1997 AN - OPUS4-12090 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard A1 - Hampe, Andreas A1 - Schulz, Eckhard T1 - Energy based characterization of the fiber-matrix interface unsing the pull-out and the push-out test T2 - Micro Mat '97 CY - Berlin, Germany DA - 1997-04-16 PY - 1997 AN - OPUS4-12100 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard A1 - Hampe, Andreas T1 - Energy based characterization of the fiber-matrix interface unsing the pull-out and the push-out test T2 - Interfacial Phenomena of Composite Materials IPCM'97 CY - Eger, Hungary DA - 1997-09-01 PY - 1997 AN - OPUS4-12101 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hampe, Andreas A1 - Kalinka, Gerhard T1 - An Advanced Indentation Technique for the Characterization of the Fibre-Matrix Interface T2 - Gordon Conference on Composites CY - San Buenaventura, CA, USA DA - 1997-01-05 PY - 1997 AN - OPUS4-12102 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard A1 - Hampe, Andreas T1 - Interfacial properties and their determination by using stiffness optimized test devices T2 - Workshop on Micro-Mechanics Measurement Technologies, NIST CY - Gaithersburg, MD, USA DA - 1997-05-28 PY - 1997 AN - OPUS4-12103 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kalinka, Gerhard A1 - Leistner, André A1 - Hampe, Andreas T1 - Characterisation of the fibre/matrix interface in reinforced polymers by the push-in technique N2 - The push-in test is the only micromechanical test method that is not restricted to artificial fibre/matrix arrangements, but allows the in situ characterisation of interfaces in composites fabricated and stressed under realistic conditions. However, with the application of this method to reinforced polymers some problems arise both in the mathematical model for evaluating test data and in the practical performance of the test. Because in some cases the deformation of the relatively compliant polymeric matrices cannot be neglected, an extension of the existing model is required. For this purpose, the elastic energy of the material around the debonded part of the fibre is estimated and included in the energy-balance analysis. Because of the small diameter of the fibres usually used for reinforcing polymers, a test apparatus was designed which ensures a high positioning accuracy in the xy plane as well as in the z direction. In order to minimise thermal and mechanical influences, the microscope for fibre selection and the force sensor/indenter are directly connected together and the apparatus is designed to be stiff in all components. A solid-state bending joint guarantees very precise control of the axial movement. Three examples of the application of this easy-to-handle and low-cost test apparatus are presented briefly in the paper: assess fibre/matrix combinations, measures to improve the interfacial adhesion and the influence of water on the interface. KW - Interface KW - Test method KW - Characterisation KW - Indentation KW - Push-in PY - 1997 SN - 0266-3538 VL - 57 IS - 8 SP - 845 EP - 851 PB - Elsevier CY - Barking AN - OPUS4-12011 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kalinka, Gerhard A1 - Hinrichsen, G. T1 - Two-dimensional computer simulation of spherulite formation by branching lamellae KW - Thermoplaste KW - Kristallisation KW - Sphärolithe KW - Lamellen KW - Modellrechnungen PY - 1997 SN - 0323-7648 SN - 1521-4044 VL - 48 SP - 256 EP - 261 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-12004 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hampe, Andreas A1 - Kalinka, Gerhard A1 - Marotzke, Christian T1 - Comparison of the Interfacial Toughness Measured by the Single Fibre Pull-Out, the Indentation and the Fragmentation Test T2 - NIST, Workshop on Micro-Mechanics Measurement Technologies for Fiber-Polymer Interfaces CY - Gaithersburg, MD, USA DA - 1997-05-28 PY - 1997 AN - OPUS4-5928 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hampe, Andreas A1 - Marotzke, Christian A1 - Kalinka, Gerhard T1 - Measurement of the Interfacial Toughness in Composites by Micromechanical Experiments T2 - 4th Arab International Conference on Polymer Science & Technology CY - Cairo, Egypt DA - 1997-09-08 PY - 1997 AN - OPUS4-5929 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard A1 - Hana, K. A1 - Fujihara, I. A1 - Hayasaki, S. A1 - Hamada, H. T1 - Comparison of Interfacial Properties obtained by using Single Filament Embedded Tensile Test and Push-in Test T2 - Recent Advancement of Interfacial Materials Science on Composite Materials '97 CY - Kyoto, Japan DA - 1997-05-07 PY - 1997 AN - OPUS4-12213 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schulz, Eckhard A1 - Kalinka, Gerhard A1 - Leistner, André A1 - Sturm, Heinz A1 - Munz, Martin A1 - Hampe, Andreas T1 - Investigation of polymeric composites reinforced with high oriented short glass fibres using the single fibre push-out test T2 - Euro-Conf. Surfaces and Interfaces in Polymers and Composites CY - Lausanne, Switzerland DA - 1997-06-03 PY - 1997 AN - OPUS4-6439 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR T1 - Amts- und Mitteilungsblatt, Band 27, Heft 4 T3 - Amts- und Mitteilungsblatt der BAM - 4/1997 PY - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-553114 SN - 0340-7551 VL - 27 IS - 4 SP - 889 EP - 958 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-55311 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR T1 - Amts- und Mitteilungsblatt, Band 27, Heft 3 T3 - Amts- und Mitteilungsblatt der BAM - 3/1997 PY - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-553127 SN - 0340-7551 VL - 27 IS - 3 SP - 635 EP - 892 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-55312 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR T1 - Amts- und Mitteilungsblatt, Band 27, Heft 2 T3 - Amts- und Mitteilungsblatt der BAM - 2/1997 PY - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-553138 SN - 0340-7551 VL - 27 IS - 2 SP - 401 EP - 640 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-55313 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR T1 - Amts- und Mitteilungsblatt, Band 27, Heft 1 T3 - Amts- und Mitteilungsblatt der BAM - 1/1997 PY - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-553145 SN - 0340-7551 VL - 27 IS - 1 SP - 1 EP - 404 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-55314 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard A1 - Leistner, André A1 - Schulz, Eckhard T1 - Friction Measurement on fiber reinforced polymer composites with using the indentation technique T2 - European Conference on Composite Materials ECCM-8 CY - Naples, Italy DA - 1998-06-03 PY - 1998 AN - OPUS4-12089 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Habel, Wolfgang A1 - Schulz, Eckhard A1 - Kalinka, Gerhard A1 - Bismarck, A. T1 - Evaluation of the Adhesion Behaviour of Optical Fibers for Sensors Embedded in Cementitiuos Materials T2 - International Workshop on Fiber Optic Sensors for Construction Materials and Bridges CY - Newark, NJ, USA DA - 1998-05-03 PY - 1998 AN - OPUS4-12091 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schulz, Eckhard A1 - Kalinka, Gerhard A1 - Sturm, Heinz A1 - Munz, Martin T1 - Investigations of the mechanical behaviour of heterogeneous polymeric systems and fibre reinforced composites using micro indentation and scanning force microscopy T2 - Special Lectures, 18. Disc. Conf. And 56the PMM.: Mech. Behaviour of polymeric materials CY - Prague, Czech Republic DA - 1998-07-20 PY - 1998 AN - OPUS4-12092 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard A1 - Schulz, Eckhard A1 - Hampe, Andreas T1 - Untersuchung der Phasenhaftung in Verbundwerkstoffen mit dem Faser-Eindrückversuch T2 - Wissensbörse - Präparationstechnik und Analytik CY - Berlin, Germany DA - 19.02.1998 PY - 1998 AN - OPUS4-12104 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard A1 - Schulz, Eckhard T1 - Influence of water on the fibre-matrix adhesion investigated by the single fiber indentation method T2 - 4th European Conference on Adhesion, 1st World Congress on Adhesion an Related Phenomena CY - Garmisch-Partenkirchen, Germany DA - 1998-09-06 PY - 1998 AN - OPUS4-12105 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hinrichsen, G. A1 - Hinrichs, V. A1 - Kalinka, Gerhard A1 - Leistner, André A1 - Macht, Christian A1 - Schulz, Eckhard A1 - Yu, Erkang T1 - The Fiber/Matrix Interphase: New Insights into an old Problem T2 - INTERNATIONAL CONFERENCES ON POLYMER CHARACTERIZATION POLYCHAR-6 CY - Denton, TX, USA DA - 1998-01-07 PY - 1998 AN - OPUS4-12006 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hampe, Andreas A1 - Kalinka, Gerhard A1 - Marotzke, Christian T1 - The Single Fibre Pull-Out Test Performed with a Microcomposite Sample T2 - The Seventh International Conference on Composite Interfaces - ICCI-VII CY - Fujisawa, Kanagawa, Japan DA - 1998-05-10 PY - 1998 AN - OPUS4-5940 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schulz, Eckhard A1 - Kalinka, Gerhard A1 - Sturm, Heinz A1 - Munz, Martin T1 - Investigation on mechanical behaviour of heterogeneous polymeric systems and fibre reinforced composites using micro indentation and scanning force microscopy T2 - 18th Disc. Conf. and 56th PMM CY - Prague, Czech Republic DA - 1998-07-20 PY - 1998 AN - OPUS4-6451 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR T1 - Amts- und Mitteilungsblatt, Band 28, Heft 2 T3 - Amts- und Mitteilungsblatt der BAM - 2/1998 PY - 1998 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-553097 SN - 0340-7551 VL - 28 IS - 2 SP - 191 EP - 498 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-55309 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR T1 - Amts- und Mitteilungsblatt, Band 28, Heft 1 T3 - Amts- und Mitteilungsblatt der BAM - 1/1998 PY - 1998 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-553106 SN - 0340-7551 VL - 28 IS - 1 SP - 1 EP - 194 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-55310 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Energy orientated data interpretation of pull-out and push-out test for the investigation of residual stresses T2 - Interface Phenomena in Composite Materials CY - Berlin, Germany DA - 1999-09-08 PY - 1999 AN - OPUS4-12093 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Testing the fibre-matrix adhesion in fiber reinforced polymers using the single fibre push-out method T2 - 8th European Conference on Applications of Surface and Interface Analysis (ECASIA 99) CY - Seville, Spain DA - 1999-10-04 PY - 1999 AN - OPUS4-12106 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hinrichs, V. A1 - Leistner, A. A1 - Kalinka, Gerhard A1 - Schulz, Eckhard A1 - Hinrichsen, G. T1 - Viscoelastic properties of the interphase in fibre reinforced polymers - measurement and simulation KW - Polymer KW - Glass fibre KW - Interphase KW - Coating KW - Glass transition KW - Dynamic KW - Viscoelastic PY - 1999 VL - 6 IS - 2 SP - 93 EP - 101 PB - North-Holland CY - New York, NY AN - OPUS4-12003 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard A1 - Schulz, Eckhard T1 - Monitoring the interface crack propagation with micromechanical test devices T2 - Interfacial Phenomena in Composite Materials CY - Berlin, Germany DA - 2001-01-28 PY - 2001 AN - OPUS4-12107 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard A1 - Schulz, Eckhard T1 - Energy Quantification of Interface Debonding Processes Using 'Stiff' Test Devices T2 - Gordon Conference on Composite Materials CY - San Buenaventura, CA, USA DA - 2001-01-28 PY - 2001 AN - OPUS4-12108 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Thomason, J.L. A1 - Kalinka, Gerhard T1 - A technique for the measurement of reinforcement fibre tensile strength at sub-millimetre gauge lengths N2 - The strength of composite reinforcement fibres is normally measured on samples of much greater length than the actual residual fibre lengths found in many composite materials. This is due to a number of limitations of the standard techniques which are employed. We present a description of a technique which enables values for the tensile strength of composite reinforcement fibres at short gauge lengths to be obtained. The technique is based on an adaptation of a micro-mechanical test apparatus for fibre pullout measurements. Data is presented which was obtained at gauge lengths of 180–380 µm on E-glass and S-2 glass® fibres taken from different chopped reinforcement products. The technique can be used at gauge lengths as short as 20 µm. The data indicates that the values of average fibre strength in these products are significantly below the pristine glass strength values. KW - Verstärkungsfaser KW - Kurzfaser KW - Längenabhängigkeit KW - Glass fibres KW - Strength KW - Mechanical testing KW - Festigkeit KW - Faser PY - 2001 U6 - https://doi.org/10.1016/S1359-835X(00)00122-6 SN - 1359-835X VL - 32 IS - 1 SP - 85 EP - 90 PB - Elsevier CY - Oxford AN - OPUS4-12012 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Micro indentation and scratch tests for surface characterisation T2 - XXII. Donauländergespräche über die natürliche und künstliche Alterung von Polymeren CY - Berlin, Germany DA - 2001-09-17 PY - 2001 AN - OPUS4-7506 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN T1 - Jahresbericht 2002 T3 - BAM Reports/Jahresberichte - 2002 PY - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-4619 SN - 0934-9456 VL - 2002 SP - 1 EP - 282 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-461 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja A1 - Kalinka, Gerhard A1 - Schulz, Ulrich T1 - Simulation von Kratzeinwirkungen am Beispiel bewitterter Polymerwerkstoffe T2 - 32. Jahrestagung der GUS (Gesellschaft für Umweltsimulation) CY - Pfinztal, Germany DA - 2003-03-26 PY - 2003 AN - OPUS4-4032 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Mikromechanik T2 - BAM, DGM Fachausschuss "Gefüge und Eigenschaften von Polymerwerkstoffen" CY - Berlin, Germany DA - 2003-12-05 PY - 2003 AN - OPUS4-4088 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Mechanische Charakterisierung des Faser-Matrix-Interface mit Einzelfaser-Tests T2 - Werkstoffwoche 2004: Kongress für innovative Werkstoffe, Verfahren und Anwendungen CY - Munich, Germany DA - 2004-09-21 PY - 2004 AN - OPUS4-4701 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - A model of spherulitic crystallization based on growing lameallae T2 - 9th Microsymposium of Electron Microscopy in Materials Science CY - Lutherstadt Wittenberg, Germany DA - 2004-05-06 PY - 2004 AN - OPUS4-4702 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Micro indentation near stiff-soft phase boundaries T2 - Polydays 2004 CY - Potsdam, Germany DA - 2004-10-04 PY - 2004 AN - OPUS4-4703 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Micro indentation near stiff-soft boundaries T2 - "Nanomech5, 5th European Symposium on nano-Mechanical Testing" CY - Hückelhoven, Germany DA - 2004-09-07 PY - 2004 AN - OPUS4-4704 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Bestimmung der Haftfestigkeit in Verbundwerkstoffen mittels Indentations- und Durchdrückexperimenten T2 - DGM Fachausschuss "Gefüge und Eigenschaften von Polymerwerkstoffen" CY - Hamburg, Germany DA - 2004-11-26 PY - 2004 AN - OPUS4-4705 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard A1 - Neumann, Burt T1 - Mikromechanische Testmethoden zur Bestimmung von Haftung und Reibung in Faserverbundwerkstoffen T2 - Deutsches Zentrum für Luft- und Raumfahrt e.V. (DLR), Institut für Strukturmechanik CY - Braunschweig, Germany DA - 2004-02-04 PY - 2004 AN - OPUS4-4700 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN ED - Lexow, Jürgen T1 - Jahresbericht 2004 T1 - Annual report 2004 T3 - BAM Reports/Jahresberichte - 2004 PY - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-4592 SN - 0934-9456 VL - 2004 SP - 1 EP - 97 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-459 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munz, Martin A1 - Sturm, Heinz A1 - Kalinka, Gerhard T1 - On the stiffness gradient at the interface between an amine-cured epoxy and a thermoplast T2 - 6. Workshop 'Rasterkraftmikroskopie in der Werkstoffwissenschaft' an der Uni Erlangen, Inst. für Werkstoffwissenschaften veranstaltet vom Arbeitskreis 'Rastersondenmikroskopie in der Werkstoffwissenschaft' im Fachausschuss Metallographie der Deutschen Gesellschaft für Materialkunde (DGM) CY - Erlangen, Germany DA - 2005-02-17 PY - 2005 AN - OPUS4-7137 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Munz, Martin A1 - Chung, Jae Un A1 - Kalinka, Gerhard ED - Possart, W. T1 - Mapping Epoxy Interphases T2 - 7th European Conference on Adhesion ; 7th EURADH CY - Freiberg, Germany DA - 2004-09-01 KW - Interface KW - Interphase KW - Epoxy KW - Copper (Cu) KW - Polyvinylpyrrolidone (PVP) KW - AFM/SFM KW - DSI KW - EDX/EDS KW - Stiffness KW - Modulus KW - Interdiffusion PY - 2005 SN - 3-527-31263-3 VL - 7 SP - 103 EP - 123 PB - Wiley-VCH CY - Weinheim AN - OPUS4-10894 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Bestimmung der Interface-Festigkeit oder -Trennarbeit mit dem Pull-out-Versuch T2 - Verbundwerkstoffe und Werkstoffverbunde CY - Kassel, Germany DA - 2005-04-06 PY - 2005 AN - OPUS4-6084 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Bestimmung der Interface-Festigkeit in carbonfaserverstärkten Werkstoffen T2 - Verbundwerkstoffe und Werkstoffverbunde CY - Kassel, Germany DA - 06.04.2005 PY - 2005 AN - OPUS4-6085 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Chung, Jaeun T1 - Nanoscale Characterization of Epoxy Interphase on Copper Microstructures N2 - The epoxy/metal interface regions are recognized as crucial for the mechanical reliability of composite materials. In particular, the spatial stress distribution is governed by modulus variations, which may result from the physical-chemical interactions between epoxy and the metal surface. The properties of the interphase between bulk polymer and metal were analyzed in nanometer scale. It was aimed to characterize the stiffness gradient of the polymeric interphase, which was formed by a thermoset being cured in contact with a metal surface. N2 - Die Grenzfläche zwischen Epoxid und Metall spielt für die mechanische Zuverlässigkeit des Verbundwerkstoffes (Composite) Epoxid/Metall eine wichtige Rolle. Insbesondere hängt die räumliche Verteilung mechanischer Spannungen von Variationen des Elastizitätsmoduls ab, die durch die physikalisch-chemischen Wechselwirkungen zwischen dem Epoxid und der Metalloberfläche hervorgerufen werden können. Daher wurden die Eigenschaften des Grenzbereichs (Interphase) zwischen dem Polymer, das nicht durch Grenzflächen-Wechselwirkungen beeinflusst wurde (Bulk-Polymer), und dem Metall auf der Nanometer-Skala analysiert. Hauptziel war es, die Steifigkeitsgradienten innerhalb der Epoxid-Interphase zu detektieren. Diese können durch die Gegenwart der Metall-Grenzfläche (Interface) hervorgerufen werden, die einen Einfluss auf den Prozess der Aushärtung zeigt. Die Rasterkraftmikroskopie (Scanning Force Microscopy, SFM) im Force Modulation Mode (FMM) erlaubt die hochauflösende Abbildung von Steifigkeitsvariationen. Die Ergebnisse aus der SFM-FMM wurden mit Konzentrationsprofilen aus der energiedispersiven Analyse von Röntgenstrahlen im Rasterelektronenmikroskop (REM-EDX) verglichen, als auch mit Relaxationskurven aus der dynamisch-mechanischen Analyse (DMA), die an Epoxid-Referenzproben durchgeführt wurde. Die untersuchten Verbundwerkstoff-Proben bestanden aus Epoxid und Kupfer. Es wurde Elektronstrahl-Lithographie (EBL) in Verbindung mit der Lift-off Technik verwendet, um Kupfer-Mikroelektroden auf einem Silizium-Wafer herzustellen. Danach wurde die Mischung aus Epoxidharz und Amin-Härter in der Gegenwart der Kupfer-Mikroelektroden ausgehärtet, wodurch ein Epoxid/Kupfer Verbundwerkstoff entstand. Es wurden zwei verschiedene Epoxid-Härter Systeme verwendet, um unterschiedliche Probentypen herzustellen. Eines bestand aus Diglycidyl-Ether des Bisphenol A (DGEBA) und einem modifizierten cycloaliphatischen Amin (EPIKOTE828 und EPIKURE F205 von Resolution Europe). Das andere bestand aus DGEBA und einem aromatischen Amin (DER332 von Dow Chemical und DDS von Fluka Chemikalien). SFM-FMM erlaubt es, die lokalen mechanischen Eigenschaften des Grenzbereichs zu beschreiben. Die neue Art der Probenpräparation ermöglicht es, eine an die Erfordernisse der SFM-FMM angepasste Glattheit der zu untersuchenden Oberfläche zu erzielen. Bei der SFM-FMM wird die vertikale Position der Probe moduliert und die dynamische Verbiegungsamplitude des SFM-Cantilevers gemessen, während sich die Spitze im Kontakt mit der Probenoberfläche befindet. Neben dem resultierenden Amplituden- und Phasensignal sind noch andere Kontraste verfügbar, wie Topographie, Auflagekraft und Lateralkraft. Diese ergänzenden Kontraste wurden dazu verwendet, die Kupfer-Grenzfläche zu identifizieren. Ferner dienten sie der Kontrolle der Qualität der SFMMessung. Insbesondere konnte gezeigt werden, dass von der Topographie induzierte Kontraste auftreten können, wenn ihre Neigung mehr als ~|3°| beträgt. Außerdem wurde die Morphologie der Oberfläche des Epoxids untersucht, die noppenartige Strukturen, so genannte „Noduln“, aufwies. Bei den gegebenen Aushärtungsbedingungen (Tg bei 80°C über 2 Stunden, Nachhärtung bei 130°C über 1 Stunde) betrug die Durchschnittsgröße der Noduln ~125 nm, und 90 Prozent der Noduln waren zwischen 75 und 200 nm groß. Das aus EPIKOTE828-EPIKURE F205 bestehende Epoxid-System bildete eine Interphase mit einer Breite von ~1,9 μm aus und der Punkt der niedrigsten Steifigkeit war in einem Abstand von ~0,4 μm vom Kupfer. Andererseits wies das DER332-DDS System eine Interphase mit einer Breite von ~2,3–4,0 μm auf. Es wurden verschiedenartige Steifigkeitsprofile festgestellt. Diese Ergebnisse zeigen, dass die Eigenschaften des metallinduzierten Grenzbereichs vom Epoxid-System abhängen. Die Steifigkeit in der Nähe von Kupfer (bis zu 0,2–0,25 μm Abstand) war deutlich höher als im Volumen des Epoxids. Sowohl die im REM als auch die im TEM durchgeführten EDX-Messungen zeigten, dass die Konzentration des Amins in der Nähe von Kupfer verringert ist. Die unter Verwendung von SFM-FMM gemessene Steifigkeit wurde mit dem Modulwert verglichen, der mittels DMA an Referenzproben wohldefinierter Amin-Epoxid Konzentrationsverhältnisse bestimmt wurde. Die gefundene Relation wurde im Rahmen eines Reaktions-Diffusions Modells interpretiert. Danach treten räumliche Schwankungen im Konzentrationsverhältnis von Amin und Epoxid auf, die zu Variationen in der Netzwerkstruktur des ausgehärteten Epoxidsführen und sich somit auch auf dessen mechanische Eigenschaften auswirken. T3 - BAM Dissertationsreihe - 15 KW - Nanoscale Characterization KW - Epoxy Interphase KW - Copper Microstructures PY - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-1435 SN - 978-3-86509-514-3 SN - 1613-4249 VL - 15 SP - 1 EP - 104 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-143 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian A1 - Kalinka, Gerhard T1 - Microscopical failure processes in fiber reinforced polymers - Mechanical aspects of the adhesion between fiber and matrix T2 - 11th International Conference on Mechanics and Technology of Composite Materials CY - Sofia, Bulgaria DA - 2006-10-02 PY - 2006 AN - OPUS4-13239 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Untersuchung des Faser-Matrix-Interface in Verbundwerkstoffen mit Einzelfaserversuchen T2 - Technische Universität Clausthal, Institut für Polymerwerkstoffe und Kunststofftechnik - Eingeladener Vortrag CY - Clausthal-Zellerfeld, Germany DA - 2006-04-26 PY - 2006 AN - OPUS4-13803 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Testing the interface shear strength of carbon fibre reinforced composites T2 - Polydays 2006 CY - Berlin, Germany DA - 2006-10-04 PY - 2006 AN - OPUS4-13804 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian A1 - Kalinka, Gerhard ED - Zachariev, G. T1 - Microscopical Failure Processes in Fiber Reinforced Polymers - Mechanical Aspects of the Adhesion between Fiber and Matrix T2 - 11th International Conference on Mechanics and Technology of Composite Materials CY - Sofia, Bulgaria DA - 2006-10-02 KW - Composite materials KW - Failure process KW - Adhesion PY - 2006 SP - 37 EP - 42 PB - Bulgarian Academy of Sciences CY - Sofia AN - OPUS4-14027 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN ED - Rockland, Ulrike T1 - Jahresbericht 2006 T1 - Annual report 2006 T3 - BAM Reports/Jahresberichte - 2006 PY - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-4578 SN - 0934-9456 N1 - Volltext (PDF) in deutsch und englisch - Full text (PDF) in German and English VL - 2006 SP - 1 EP - 108 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-457 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalinka, Gerhard T1 - Mikromechanische Methoden zur Messung der Faser-Matrix-Haftung in Polymermatrix-Verbundwerkstoffen T2 - Kolloquium des Fraunhofer IZM CY - Teltow, Germany DA - 2007-07-20 PY - 2007 AN - OPUS4-15858 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ho, K.K.C. A1 - Lamoriniere, S. A1 - Kalinka, Gerhard A1 - Schulz, Eckhard A1 - Bismarck, A. T1 - Interfacial behavior between atmospheric-plasma-fluorinated carbon fibers and poly(vinylidene fluoride) N2 - Atmospheric-plasma fluorination was used to introduce fluorine functionalities onto the surface of carbon fibers without affecting their bulk properties. The interfacial adhesion between atmospheric-plasma-fluorinated carbon fibers and poly(vinylidene fluoride) (PVDF) was studied by means of direct wetting measurements and single fiber pullout tests. Measured contact angles of PVDF melt droplets on modified carbon fibers show that short exposure times of carbon fibers to atmospheric-plasma fluorination (corresponding to a degree of surface fluorination of F/C = 0.01 (1.1%)) leads to improved wettability of the fibers by PVDF melts. The apparent interfacial shear strength as a measure of practical adhesion, determined by the single-fiber pullout test, increases by 65% under optimal treatment conditions. The improved practical adhesion is not due to the formation of transcrystalline regions around the fibers or a change of the bulk matrix crystallinity or to an increased surface roughness; it seems to be due to the compatibilization of the interface caused of the atmospheric-plasma fluorination of the carbon fibers. KW - Carbon fibers KW - Fluorination KW - Contact angle KW - Interface KW - Adhesion KW - Surface area KW - Fiber properties PY - 2007 U6 - https://doi.org/10.1016/j.jcis.2007.04.076 SN - 0021-9797 SN - 1095-7103 VL - 313 IS - 2 SP - 476 EP - 484 PB - Elsevier CY - Orlando, Fla. AN - OPUS4-16026 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ho, K.K.C. A1 - Kalinka, Gerhard A1 - Tran, M.Q. A1 - Polyakova, N.V. A1 - Bismarck, A. T1 - Fluorinated carbon fibres and their suitability as reinforcement for fluoropolymers N2 - The interaction between direct fluorinated carbon fibres and various fluoropolymers (ethylene-chlorotrifluoroethylene, poly vinylidene fluoride, fluorinated ethylene propylene copolymer and tetrafluoroethylene-perfluoro alkoxy vinyl ether copolymer) was studied by means of direct wetting measurements between fibres and the polymer melts and single fibre pull-out tests. The results of both techniques allow the adhesion behaviour between the fibres and the matrices to be predicted. The results obtained show that a low degree of surface fluorination of carbon fibres leads to an improved wettability between the fibres and fluoropolymer melts and this is an indicator for an improved thermodynamic work of adhesion. The apparent interfacial shear strength as measure of practical adhesion, determined by the single fibre pull-out test, increases with increasing degree of surface fluorine content up to a maximum, which depends on the degree of fluorination of the matrix used. The improved interaction between the fibre and the matrix is due to an enhanced compatibility at the fibre/matrix interface. KW - Adhesion KW - A. Carbon fibres KW - B. Debonding KW - B. Interfacial strength PY - 2007 U6 - https://doi.org/10.1016/j.compscitech.2007.02.012 SN - 0266-3538 VL - 67 IS - 13 SP - 2699 EP - 2706 PB - Elsevier CY - Barking AN - OPUS4-15814 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Qian, H. A1 - Bismarck, A. A1 - Greenhalgh, E. A1 - Kalinka, Gerhard A1 - Shaffer, M.S.P. T1 - Hierachical composites reinforced with carbon nanotube grafted fibres T2 - MC 8: ADVANCING MATERIALS BY CHEMICAL DESIGN CY - London, England DA - 2007-05-02 PY - 2007 AN - OPUS4-20121 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN ED - Rockland, Ulrike T1 - Jahresbericht 2007 T1 - Annual report 2007 T3 - BAM Reports/Jahresberichte - 2007 PY - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-4564 SN - 0934-9456 N1 - Volltext (PDF) in deutsch und englisch - Full text (PDF) in German and English VL - 2007 SP - 1 EP - 153 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-456 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Juntaro, J. A1 - Pommet, M. A1 - Kalinka, Gerhard A1 - Mantalaris, A. A1 - Shaffer, M.S.P. A1 - Bismarck, A. T1 - Creating Hierarchical Structures in Renewable Composites by Attaching Bacterial Cellulose onto Sisal Fibers KW - Nanotubes KW - Cellulose KW - Polymer KW - Interface KW - Hierarchical Structures PY - 2008 U6 - https://doi.org/10.1002/adma.200703176 SN - 0935-9648 SN - 1521-4095 VL - 20 IS - 16 SP - 3122 EP - 3126 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-18258 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Tran, M.Q. A1 - Ho, K.K.C. A1 - Kalinka, Gerhard A1 - Shaffer, M.S.P. A1 - Bismarck, A. T1 - Carbon fibre reinforced poly(vinylidene fluoride): Impact of matrix modification on fibre/polymer adhesion N2 - The quality of interfacial interaction is dictated by the surface chemistry of the carbon fibres and the composition of the matrix. The composition of poly(vinylidene fluoride) (PVDF) was modified by the addition of maleic anhydride grafted PVDF. The surface properties of the various matrix formulations were characterised by contact angle and electrokinetic measurements. Carbon fibres were modified by industrial electrochemical oxidation and oxidation in nitric acid, or the use of a traditional epoxy-sizing of industrially oxidised fibres. The surface composition, morphology and wetting behaviour of the carbon fibres was characterised. The interaction between modified PVDF and the carbon fibres was studied by direct contact angle measurements between PVDF melt on single carbon fibres and by single fibre pull-out tests. The best wetting and adhesion behaviour was achieved between PVDF containing 5 ppm grafted maleic anhydride (MAH) and epoxy-sized carbon fibres. The addition of MAH-grafted PVDF to the unmodified PVDF caused the apparent interfacial shear strength to increase by 184%. The apparent interfacial shear strength of this fibre–matrix combination allowed for the utilisation of 100% of the yield tensile strength of PVDF. KW - A. Carbon fibres KW - A. Coupling agents KW - B. Interface KW - B. Adhesion KW - Wetting PY - 2008 U6 - https://doi.org/10.1016/j.compscitech.2008.02.021 SN - 0266-3538 VL - 68 IS - 7-8 SP - 1766 EP - 1776 PB - Elsevier CY - Barking AN - OPUS4-18259 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Pommet, M. A1 - Juntaro, J. A1 - Heng, J.Y.Y. A1 - Mantalaris, A. A1 - Lee, A.F. A1 - Wilson, K. A1 - Kalinka, Gerhard A1 - Shaffer, M.S.P. A1 - Bismarck, A. T1 - Surface modification of natural fibers using bacteria: depositing bacterial cellulose onto natural fibers to create hierarchical fiber reinforced nanocomposites N2 - Triggered biodegradable composites made entirely from renewable resources are urgently sought after to improve material recyclability or be able to divert materials from waste streams. Many biobased polymers and natural fibers usually display poor interfacial adhesion when combined in a composite material. Here we propose a way to modify the surfaces of natural fibers by utilizing bacteria (Acetobacter xylinum) to deposit nanosized bacterial cellulose around natural fibers, which enhances their adhesion to renewable polymers. This paper describes the process of modifying large quantities of natural fibers with bacterial cellulose through their use as substrates for bacteria during fermentation. The modified fibers were characterized by scanning electron microscopy, single fiber tensile tests, X-ray photoelectron spectroscopy, and inverse gas chromatography to determine their surface and mechanical properties. The practical adhesion between the modified fibers and the renewable polymers cellulose acetate butyrate and poly(l-lactic acid) was quantified using the single fiber pullout test. KW - Composires KW - Bacteria KW - Surface KW - Cellulose natural fibers PY - 2008 U6 - https://doi.org/10.1021/bm800169g SN - 1525-7797 VL - 9 IS - 6 SP - 1643 EP - 1651 PB - ACS Publ. CY - Washington, DC, USA AN - OPUS4-23162 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -