46091 2018 eng 82 92 1 1 article Elsevier Amsterdam 0 -- -- -- Effects of various geometrical and physical factors, as well as the method of data reduction (analysis of experimental forceedisplacement curves) on the values of local interfacial strength parameters (local IFSS, td, and critical energy release rate, Gic) determined by means of a single fiber pull-out test are discussed. Experimental results of our pull-out tests on several fiberepolymer matrix systems showed that td and Gic weakly depended on geometrical factors. However, the pull-out test appeared to be sensitive to the conditions of specimen formation and testing, such as changing the nature of the contacting surfaces (fiber sizing) and the fiber pull-out rate. Of several methods of td and Gic Determination from a forceedisplacement curve, the most reliable and reproducible one is the approach based on the values of the maximum force recorded in a pull-out test and the interfacial frictional force immediately after fiber debonding. Advanced Industrial and Engineering Polymer Research 10.1016/j.aiepr.2018.06.002 2542-5048 urn:nbn:de:kobv:b43-460918 Creative Commons - CC BY-NC-ND - Namensnennung - Nicht kommerziell - Keine Bearbeitungen 4.0 International S. Zhandarov E. Mäder Gerhard Kalinka C. Scheffler C. Poitzsch S. Fliescher eng uncontrolled Interface eng uncontrolled Interfacial shear strength eng uncontrolled Pull-out composite materials eng uncontrolled Polymer matrix composites eng uncontrolled Critical energy release rate eng uncontrolled Geometrical factors Ingenieurwissenschaften und zugeordnete Tätigkeiten Verlagsliteratur Datei für die Öffentlichkeit verfügbar ("Open Access") Wissenschaftliche Artikel der BAM Bundesanstalt für Materialforschung und -prüfung (BAM) https://opus4.kobv.de/opus4-bam/files/46091/Investigation_of_interfacial_strength_parameters_in_polymer_matrix.pdf